Howto:2N Helios IP - 2N - SIP Testreport 2017

Summary

The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as recommended product.

Certification Status

The tests for this product have been completed.

Testing of this product has been finalized January 16th, 2017.

Version

Firmware Version:

2.18.0.27.5

Hardware Version:

570v5

innovaphone Firmware:

11r2 sr22 IPVA[11.3648]

Device Setup

Tested feature	Result
Register Device w/o specific configuration (requires DHCP)	no
DHCP is default	yes
DHCP yields timeserver and time displays correctly	no
SNTP config has TZ string for timezone/dst autoconfig	no
DHCP yields correct default gateway	yes
Device supports magic registration (e.g. by serial)	no
Fixed registrations works	yes
Device registers w/o Extension (just by name)	no
Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)	no
Device registers by extension	yes
Device registers with password	yes
Device registers multiple identities	yes
2nd GK is supported (mit SIP??)	no
Changing registrations between GK1 and GK2 (mit SIP??)	no
PBX redirect (UserObject on Master/Phone at Slave registered)	yes
Physical Location (@PBX) correct?	yes
Device supports STUN protocol	no
Device sends NAT - keepalive messages	yes
Device usable in hosting scenarios?	yes
Device refreshes the PBX registration	yes
Device supports SIP over TCP	yes
Device supports SRTP	no
Device supports SIPS (SIP over TLS)	no
Device supports HTTPS	yes
Device supports VAD (Voice activity detection)	no
Device supports Auto-Answer (needed when used with CTI client)	yes
Supported menu languages	yes

Test Results

FIXME: Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report

Basic Call

Tested feature	Result
call using g711a	yes
call using g711u	yes
call using g729	yes
call using g722	yes
Overlapped sending	no
Device sets up an early media channel for incoming calls	no
Device sets up an early media channel for outgoing calls	no
Device shows called id number	no
Device shows called id name	no
Device shows called id display info	no
Fax using T.38	no
CGPN can be suppressed	no
Reverse Media Negotiation	yes
Device shows CDPN/CGPN on incoming call	yes
Device shows CDPN/CGPN on outgoing call	yes
Device shows connected number	no
Device shows diverting number	no
Device supports distinctive ringing	yes
Device supports asymetric codec negotiation	no
Device supports codec renegotiation during a conversation	yes
Device shows correct display message in case of busy CDPN	no
Device shows correct display message in case of not existing CDPN	no
Device shows correct display message in case that the call is declined	no
3party conference possible	no
Device supports display updates during call(needed for Directory Search object)	no
Long Time Call (>30 min) works?	yes
Registration redirecting works?	no
Incoming SRTP call - SRTP not enabled on DUT	no
Incoming SRTP call - SRTP enabled on DUT	no
Voice Quality OK?	yes

DTMF

Tested feature	Result
DTMF tones sent correctly	yes
DTMF tones received correctly	yes

Hold/Retrieve

Tested feature	Result
Device handles incoming hold correctly	yes
Device can put a call on hold using correctly(inactive or sendonly)	no

Transfer with consultation

Tested feature	Voice Ok?	MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.	yes	yes
inno1 calls inno2. inno1 transfers to testphone.	yes	yes
inno1 calls testphone. inno1 transfers to inno2.	yes	yes
inno1 calls testphone. testphone transfers to inno2.	N/A	N/A
testphone calls inno1. inno1 transfers to inno2.	yes	yes
testphone calls inno1. testphone transfers to inno2.	N/A	N/A

Transfer with consultation (alerting only)

Tested feature	Voice Ok?	MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.	N/A	N/A
inno1 calls inno2. inno1 transfers to testphone.	N/A	N/A
inno1 calls testphone. inno1 transfers to inno2.	N/A	N/A
inno1 calls testphone. testphone transfers to inno2.	N/A	N/A
testphone calls inno1. inno1 transfers to inno2.	N/A	N/A
testphone calls inno1. testphone transfers to inno2.	N/A	N/A

Blind Transfer

Tested feature	Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.	yes
inno1 calls inno2. inno1 transfers to testphone.	yes
inno1 calls testphone. inno1 transfers to inno2.	yes
inno1 calls testphone. testphone transfers to inno2.	N/A
testphone calls inno1. inno1 transfers to inno2.	yes
testphone calls inno1. testphone transfers to inno2.	N/A

Blind Transfer (alerting only)

Tested feature	Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.	N/A
inno1 calls testphone. testphone transfers to inno2.	N/A
testphone calls inno1. inno1 transfers to inno2.	N/A

Broadcast Group & Waiting Queue

Tested feature	Result
testphone makes call to a Broadcast Group. inno1 picks up.	yes
inno1 makes call to a Broadcast Group. testphone picks up.	yes
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.	yes
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.	yes
inno1 makes call to a Waiting Queue. testphone picks up.	yes

DTMF Features

Tested feature	Result
CFU Activate/Deactivate	no
CFB Activate/Deactivate	no
CFNR Activate/Deactivate	no
Pickup Group	no
Pickup Directed	no
Park/Unpark	no
Park To/Unpark From	no
Call Completion Busy	no
Call Completion Cancel	no
Join Group/Leave Group	no
Join All Groups/Leave All Groups	no
Enable mobility/Disable mobility	no
Enable mobility cw/Disable mobility cw	no
Set presence	no

Other Features

Directory

Tested feature	Result
Device built-in directory	yes
Exists	yes
Can be dialled from	yes
Does CLI resolution	no
display update if directory object is used?	yes

Tested feature	Result
External LDAP Server supported	no
Can be dialled from	no
Does CLI resolution	no
display update if directory object is used?	no

Keys

Tested feature	Result
Device has speed dial keys	yes
Device has programmable function keys	yes
Device has partner keys	yes

CTI Features (with SOAP / TAPI / myPBX)

Tested feature	Result
User Call - outgoing call	no
User Connect - Answer incoming call	no
User Reject - Reject alerting call	no
User Disconnect - Disconnect active call	no
User Hold - Put connected call on hold	no
User Hold Retrieve - Retrieve call on hold	no
User Transfer - Transfer with Consult	no
User Transfer - Transfer with Consult (Alerting only)	no
User Transfer - Blind Transfer	no
3PTY - Make 3rd Party Call	no
Connected Number Update on Display	no

UC Features

Tested feature	Result
Video calls possible?	yes
Video conference possible? (max. amount of participants)	no
Video Codecs	yes
enable/disable video during call	yes
Set own presence possible?	no
See presence of others possible?	no
chat with mypbx client possible?	no
chat with same vendor client possible?	no
send IM - messages to phones possible?	no

Configuration

innovaphone configuration

The doorphone registers at the PBX as a normal PBX user.

doorphone configuration

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.