Howto:Firmware Upgrade V7 V8: Difference between revisions
mNo edit summary |
m (→End of life) |
||
| Line 38: | Line 38: | ||
== End of life== | == End of life== | ||
Due to Memory | Due to Memory limitations there is no V8 software for the IP3000. | ||
== Related Articles == | == Related Articles == | ||
Revision as of 09:15, 29 September 2009
Applies To
This information applies to
- all V8 capable innovaphone devices
More Information
Problem Details
Upgrade and Downgrade
The upgrading and downgraing procedure for firmware is according to V7 as described in Howto:Firmware_Upgrade_V6_V7.
Configuration Changes
PBX Object
The Object type for a physical PBX is changed from Node Object to PBX Object. So now it exists a Node Object (for the numbering node Tree ) and a PBX Object (for the PBX Tree).
The Ldap Qiuckdial Object is merged with the Directory Search Object, see Reference8:Administration/PBX/Objects/LDAP Quickdial
Phone Display
Please be in mind that the complete Phone ringing display for all innovaphone IP Phones (including the IP72) with V8 changes, see Reference8:Phone_Ringing_Screen.
Known Problems
H323 EFC encoding changed
- Starting with V8 H323 EFC encoding is changed as described in the bug note Support:DVL-Hotfixes#coding_of_H.323_EFC_wrong. It results in not ringing V6,V7 phones, if called by V8 PBX.
Solution: Pre-V8 devices must be updated to recent V6 or V7 version, to be compatible to V8.
In case no update to recent V6 or V7 is possible, following configuration change must be done on the pre-V7 device:
config change H323 /fix 1
End of life
Due to Memory limitations there is no V8 software for the IP3000.
Related Articles