Howto:MyApps Cloud - Configuration of a Standby from the master PBX

Applies To

This information applies to

• v13
• The local Standby PBX is connecting to the Master PBX in the Cloud.

How to configure a Standby from the master PBX on the Cloud

The following explains the configuration to have a Slave or Standby PBX connected to a Master PBX (in the Cloud)

Configuration on the Master PBX

• In the PBX create a PBX Object, named e.g. slavepbx
  ==> NOTE: The password of this object you will need to configuer on the Standby or Slave PBX

Configuration on the Standby or Slave PBX

• PBX Mode
  ==> Standby

• System Name
  ==> This stands for the Domaine Name of the Cloud Instance. Example: customerdomain.com

• PBX Name
  ==> This muss be identical, to the name configured on the master. On the example bekow, "master" would be the correct name.

• Registration to the Master
  ==> Should be with encryption (H.323/TLS)

• Master
  ==> IP Address of the Master PBX: Use the Public IP Address through which the Master PBX is reachable.
  Note: A DNS address is not supported here.

• Replicate from Master using TLS