Howto:Projectcode / Pincode: Difference between revisions
m (→Known Problems) |
|||
| Line 20: | Line 20: | ||
[[image:Projectcalls.png]] | [[image:Projectcalls.png]] | ||
Via a gateway Object the calls are routed into the relay. The 872 is getting "stripped". So only the 2222 (as pin code) is coming into the "relay" | |||
[[Image:Pincode Project 2.png]] | |||
===Samwin CBC Configuration=== | ===Samwin CBC Configuration=== | ||
Revision as of 16:16, 30 November 2010
Applies To
This information applies to
- all innovaphone PBX´s v7 and later
|
FIXME: has to be finished |
More Information
This article describes how to configure a projectcode/pincode solution together with billing/accounting application (Samwin CAS). If a Project code is need to getting trunk access or for charging calls for a special project. Also for separating private calls and business calls with a pin and chairing them separately.
Problem Details
If every user (> 100 users) needs an own private pin then this solution is not suitable, as the pins must be configured in the gateway aka "relay".
System Requirements
If also a report should be generated like on call amount then Samwin CBC must be used for billing/accounting purpose.
innovaphone Configuration
For using the pin you first dial into a Waiting queue and then enter the pin. In the Waiting Queue there are DTMF destinations configured, so in this case you dial 8402 (for the WQ) and 2222 (that is your pin).
Via a gateway Object the calls are routed into the relay. The 872 is getting "stripped". So only the 2222 (as pin code) is coming into the "relay"
