Reference11r2:Interfaces/ETH/802.1X: Difference between revisions
Jump to navigation
Jump to search
(Added a reference-link Howto:Security_works_with_innovaphone) |
(→Notes) |
||
Line 14: | Line 14: | ||
=Notes= | =Notes= | ||
<references/> | <references/> | ||
=Related Articles= | |||
[[Concept_802.1X|Concept 802.1X]] | [[Concept_802.1X|Concept 802.1X]] | ||
Revision as of 17:48, 15 November 2018
- EAP-MD5
- User Enter the user/identity to authenticate with.
- Password Enter the shared secret for the MD5 challenge/response handshake.
- EAP-TLS
The EAP-MD5 settings are going to reused for EAP-TLS needs. I.e. there's currently no extra setting for EAP-TLS. The configuration for an actual certificate, being fed into the EAP-TLS session, can be found at General/Certificates/Device Certificate.
- User Enter the user/identity[1] to be sent within the EAP Identity request.[2]
- Password Enter arbitrary content.[2]
- General/Certificates/Device Certificate
- Proxy-Logoff
If the phone's LAN-port got disconnected, EAPOL-Logoff messages are going to be sent on behalf of participants connected to the phone's PC-port. An EAPOL-Logoff will be sent for each MAC-address learned from traversing EAPOL-Start messages.