Reference13r1:PBX/Config/Authentication

From innovaphone wiki
Revision as of 10:23, 6 November 2019 by Ckl (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
There are also other versions of this article available: Reference13r1 (this version) | Reference13r2 | Reference13r3

The authentication for myApps and myPBX is configured on this page.

Configuration

Authentication

  • Two-factor authentication Requires users to additionally approve their logins using an existing session or by clicking a link sent via email. (myApps only)
  • Passwords (myApps and myPBX)
    • PBX only Login is allowed with PBX user password only.
    • Netlogon only Login is allowed with Windows password only.
    • PBX and Netlogon Login is allowed with both PBX user password and Windows password.

Email verification

For two-factor authentication an email account for sending verification mails needs to be configured.

  • SMTP server The IP address or DNS name of the SMTP server.
  • Client host name The hostname or IP address for the EHLO message. Optional, defaulting to 127.0.0.1.
  • Sender name A readable name that is used as the sender of the emails.
  • Email address The email address for sending mails.
  • Username The username of the email account.
  • Password The password of the email account.
  • Verification link The link that is used for accepting or rejecting sessions. Configure https://PBX-IP-or-DNS-name/PBX0/session.xml
  • Test Here you can send a test mail using the configured account.