Reference9:Phone/User/Function-Keys/Partner
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference | Reference8 | Reference9 (this version)
Partner
The Partner function is divided into three states.
- Idle: In the Idle state, this key performs a direct dial.
- Alerting: This state indicates that the partner's telephone is ringing; the call can be picked up with this key.
- Busy: In the Busy state, the function key is used only to display the partner state.
With the following functions, you can use the Partner function as described.
Partner identification
- You define the partner telephone with the corresponding number and name.
Partner Type
- Default - normal partner key
- Executive - use the CLIP (extension) of the partners executive object to execute calls
- Secretary - see CFX (call diversion) state and primary secretary join/unjoin group state.
Perform intrusion if partner is busy
- If the partner’s line is already active, an intrusion call is sent with a preceding alert signal. The current call is automatically put on hold.
Type Conference or silent monitoring
Subscribe for Presence
- Needed to be activated when the presence status of the partner should be monitored.
Subscribe for Dialog Info
- Needed to be activated to get the partner informations of users from other PBXs. When Subscribe for Dialog Info is turned, the partner's busy state will be retrieved using a subscription. No group indications are required nor evaluated then. Otherwise, the partner's busy state is derived from group indications received. As a result, the partner key will work only if group indications are configured for the user.
There are 4 modes to subscribe for dialog info (no need for group indications )
- the user (that should be monitored) is in the same group, and you are active in this group
- one of the own active groups added in the access list² of the monitored user
- added the own domain in the access list (e.g @innovaphone.com)
- added the own name in the access list of the monitored user
² The access list is used for the my PBX client to Reference9:PBX/Objects/Edit Allow the call state and presence status of other users.
Hide calling party in alerting state
- The number of the incoming call is hidden for the partner.
Hide calling party in ringback state
Show connected party in busy state
- Unlike with the preceding function, the number of the active line is visible only to the partner.
Do not pick up an alerting Call