Howto:Gigaset N510 PRO - Gigaset - Testreport: Difference between revisions
m (→Device Setup) |
|||
(22 intermediate revisions by 7 users not shown) | |||
Line 5: | Line 5: | ||
The usage of wideband codecs of the phone were tested successfully. The integration of the innovaphone voicemail in the Gigaset solution is possible. The message waiting indication will be displayed on the handsets. The handsets support 3-party conference calls. | The usage of wideband codecs of the phone were tested successfully. The integration of the innovaphone voicemail in the Gigaset solution is possible. The message waiting indication will be displayed on the handsets. The handsets support 3-party conference calls. | ||
The Gigaset N510IP PRO DECT base-station was tested successfully also in a [[Howto:Hosting#Overview | hosted setup]]. The test results are the same as if the N510IP is used in a normal (in the same LAN as the PBX) setup. It is not required to activate MediaRelay on the Frontend. | |||
==Certification Status== | ==Certification Status== | ||
Line 15: | Line 15: | ||
<!-- {{Template:Compat Status "rejected"}} --> | <!-- {{Template:Compat Status "rejected"}} --> | ||
Testing of this product has been finalized September | Testing of this product has been finalized September 6th, 2013. | ||
==Version== | ==Version== | ||
Firmware Version: | Firmware Version: | ||
* 42.078 (420780000000 / V42.00) | |||
innovaphone Firmware: | innovaphone Firmware: | ||
* V10 SR3 | |||
* TSP 8150 | |||
== Test Setup == | == Test Setup == | ||
[[Image:Testreport_Terminals_SIP_or_H323_1.PNG]] | [[Image:Testreport_Terminals_SIP_or_H323_1.PNG]] | ||
==Device Setup== | ==Device Setup== | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result | ||
Line 52: | Line 52: | ||
|No | |No | ||
|---- | |---- | ||
|Fixed registrations works | |Fixed registrations works | ||
|Yes | |Yes | ||
|---- | |---- | ||
|Device registers w/o Extension (just by name) | |Device registers w/o Extension (just by name) | ||
|Yes | |||
|---- | |||
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ) | |||
|Yes | |Yes | ||
|---- | |---- | ||
Line 66: | Line 69: | ||
|Device registers multiple identities | |Device registers multiple identities | ||
|Yes | |Yes | ||
|---- | |||
|2nd GK is supported | |||
|According to [https://gigaset.atlassian.net/wiki/pages/viewpage.action?pageId=28540959 gigaset-wiki] only by DNS according to RFC3263 | |||
|---- | |||
|Device supports Redirection of Registration (Master redirects to Slave) | |||
|No | |||
|---- | |---- | ||
|Device supports STUN protocol | |Device supports STUN protocol | ||
Line 71: | Line 80: | ||
|---- | |---- | ||
|Device sends NAT - keepalive messages | |Device sends NAT - keepalive messages | ||
|Yes | |Yes | ||
|---- | |---- | ||
Line 80: | Line 86: | ||
|---- | |---- | ||
|Device supports SIP over TCP | |Device supports SIP over TCP | ||
| | |Yes tested in LAN setup. | ||
Hosting Setup, Yes tested with Gigaset Firmware 42.250 (422500000000 / V42.00) and innovaphone firmware V13r2sr15 in myApps Cloud. | |||
Media Relay needs to be ticked at the Hardware ID of the User Object where the N510 IP PRO is registered. | |||
|---- | |---- | ||
|Device supports SRTP | |Device supports SRTP | ||
| | |Not tested, needs SIPS | ||
|---- | |---- | ||
|Device supports SIPS (SIP over TLS) | |Device supports SIPS (SIP over TLS) | ||
| | |Not OK, registration fails | ||
|---- | |---- | ||
|Device supports HTTPS | |Device supports HTTPS | ||
| | |Not for Admin access on the Web-page, probably as HTTP-client to retrieve firmware/configuration from remote servers | ||
|---- | |---- | ||
|Device supports VAD (Voice activity detection) | |Device supports VAD (Voice activity detection) | ||
| | |Not tested, according to manual supported | ||
|---- | |---- | ||
|Supported menu languages | |Supported menu languages | ||
Line 105: | Line 114: | ||
=== Basic Call === | === Basic Call === | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result with MR | ||
|---- | |---- | ||
|call using g711a | |call using g711a | ||
Line 116: | Line 125: | ||
|---- | |---- | ||
|call using g729 | |call using g729 | ||
|Yes | |||
|---- | |||
|call using g722 | |||
|Yes | |Yes | ||
|---- | |---- | ||
Line 121: | Line 133: | ||
|No | |No | ||
|---- | |---- | ||
| | |Device sets up an early media channel for incoming calls | ||
|N/A | |||
|---- | |||
|Device sets up an early media channel for outgoing calls | |||
|Yes | |Yes | ||
|---- | |---- | ||
Line 152: | Line 167: | ||
|---- | |---- | ||
|Device shows diverting number | |Device shows diverting number | ||
| | |No | ||
|---- | |---- | ||
|Device supports distinctive ringing | |Device supports distinctive ringing | ||
| | |Yes | ||
|---- | |---- | ||
|Device supports | |Device supports asymetric codec negotiation | ||
| | |Not tested | ||
|---- | |---- | ||
|Device supports codec renegotiation during a conversation | |Device supports codec renegotiation during a conversation | ||
Line 167: | Line 182: | ||
|---- | |---- | ||
|Device shows correct display message in case of not existing CDPN | |Device shows correct display message in case of not existing CDPN | ||
| | |No, it says "Not available" | ||
|---- | |---- | ||
|Device shows correct display message in case that the call is declined | |Device shows correct display message in case that the call is declined | ||
|Yes | |Yes | ||
|---- | |---- | ||
| | |3party conference possible | ||
|Yes | |Yes | ||
|---- | |||
|Device supports display updates during call(needed for Directory Search object) | |||
|No | |||
|---- | |---- | ||
|Long Time Call (>30 min) works? | |Long Time Call (>30 min) works? | ||
|Yes | |Yes | ||
|---- | |---- | ||
| | |Incoming SRTP call - SRTP not enabled on DUT | ||
| | |Yes | ||
|---- | |||
|Incoming SRTP call - SRTP enabled on DUT | |||
|Not tested, requires sips | |||
|---- | |---- | ||
|Voice Quality OK? | |Voice Quality OK? | ||
Line 187: | Line 208: | ||
=== DTMF === | === DTMF === | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result | ||
|---- | |---- | ||
|DTMF tones sent correctly | |DTMF tones sent correctly | ||
| | |OK | ||
|---- | |---- | ||
|DTMF tones received correctly | |DTMF tones received correctly | ||
| | |OK, DTMFs are sent as RTP-Events (no DTMF dependent function on Gigaset device) | ||
|} | |} | ||
Line 208: | Line 229: | ||
|---- | |---- | ||
|Device can put a call on hold using correctly(inactive or sendonly) | |Device can put a call on hold using correctly(inactive or sendonly) | ||
|Yes | |Yes | ||
|} | |} | ||
=== Transfer with consultation === | === Transfer with consultation === | ||
Line 293: | Line 312: | ||
|---- | |---- | ||
|inno1 calls testphone. testphone transfers to inno2. | |inno1 calls testphone. testphone transfers to inno2. | ||
| | |N/A, device does only transfer with consultation | ||
|---- | |---- | ||
|testphone calls inno1. inno1 transfers to inno2. | |testphone calls inno1. inno1 transfers to inno2. | ||
Line 299: | Line 318: | ||
|---- | |---- | ||
|testphone calls inno1. testphone transfers to inno2. | |testphone calls inno1. testphone transfers to inno2. | ||
| | |N/A, device does only transfer with consultation | ||
|} | |} | ||
Line 312: | Line 331: | ||
|---- | |---- | ||
|inno1 calls testphone. testphone transfers to inno2. | |inno1 calls testphone. testphone transfers to inno2. | ||
| | |N/A, device does only transfer with consultation | ||
|---- | |---- | ||
|testphone calls inno1. inno1 transfers to inno2. | |testphone calls inno1. inno1 transfers to inno2. | ||
Line 338: | Line 357: | ||
|inno1 makes call to a Waiting Queue. testphone picks up. | |inno1 makes call to a Waiting Queue. testphone picks up. | ||
|Yes | |Yes | ||
|} | |||
=== DTMF Features === | |||
{| border="1" | |||
!Tested feature | |||
!Result | |||
|---- | |||
|CFU Activate/Deactivate | |||
|Ok | |||
|---- | |||
|CFB Activate/Deactivate | |||
|Ok | |||
|---- | |||
|CFNR Activate/Deactivate | |||
|Ok | |||
|---- | |||
|Pickup Group | |||
|Ok | |||
|---- | |||
|Pickup Directed | |||
|Ok | |||
|---- | |||
|Park/Unpark | |||
|Ok | |||
|---- | |||
|Park To/Unpark From | |||
|Ok | |||
|---- | |||
|Call Completion Busy | |||
|Nok, Gigaset rejects incoming call for starting CCBS/CCNR | |||
|---- | |||
|Call Completion Cancel | |||
|Not tested, since CCBS/CCNR does not work | |||
|---- | |||
|Join Group/Leave Group | |||
|Ok | |||
|---- | |||
|Join All Groups/Leave All Groups | |||
|Ok | |||
|---- | |||
|Enable mobility/Disable mobility | |||
|Not tested, feature is invoked by mobile phone | |||
|---- | |||
|Enable mobility cw/Disable mobility cw | |||
|Not tested, feature is invoked by mobile phone | |||
|---- | |||
|Set presence | |||
|Ok | |||
|} | |} | ||
Line 344: | Line 412: | ||
===Directory=== | ===Directory=== | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result | ||
|---- | |---- | ||
|Device built-in directory | |Device built-in directory | ||
|---- | |---- | ||
|Exists | |Exists | ||
|Yes | |Yes | ||
|---- | |---- | ||
|Can be dialled from | |Can be dialled from | ||
Line 358: | Line 425: | ||
|---- | |---- | ||
|Does CLI resolution | |Does CLI resolution | ||
|Yes | |||
|---- | |||
|display update if directory object is used? | |||
|Yes | |Yes | ||
|} | |} | ||
Line 365: | Line 435: | ||
*You can add the call to the local phonebook from the call-list. | *You can add the call to the local phonebook from the call-list. | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result | ||
|---- | |||
|External LDAP Server supported | |||
|Yes, tested with Estos Metadir. PBX not supported as external LDAP server and LDAPS not supported. | |||
|---- | |---- | ||
| | |Can be dialled from | ||
|Yes | |Yes | ||
|---- | |---- | ||
| | |Does CLI resolution | ||
|Yes | |Yes | ||
|---- | |---- | ||
| | |display update if directory object is used? | ||
|Yes | |Yes | ||
|} | |} | ||
Line 383: | Line 455: | ||
===Keys=== | ===Keys=== | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result | ||
|---- | |---- | ||
|Device has speed dial keys | |Device has speed dial keys | ||
|Yes | |Yes, depending on handset | ||
|---- | |---- | ||
|Device has programmable function keys | |Device has programmable function keys | ||
|Yes | |Yes, depending on handset | ||
|---- | |---- | ||
|Device has partner keys | |Device has partner keys | ||
Line 399: | Line 471: | ||
===CTI Features (with SOAP / TAPI / myPBX) === | ===CTI Features (with SOAP / TAPI / myPBX) === | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result | ||
|---- | |---- | ||
|User Call - outgoing call | |User Call - outgoing call | ||
| | |Ok | ||
|---- | |---- | ||
|User Connect - Answer incoming call | |User Connect - Answer incoming call | ||
| | |Ok | ||
|---- | |---- | ||
|User Reject - Reject alerting call | |User Reject - Reject alerting call | ||
| | |Ok | ||
|---- | |---- | ||
|User Disconnect - Disconnect active call | |User Disconnect - Disconnect active call | ||
| | |Ok | ||
|---- | |---- | ||
|User Hold - Put connected call on hold | |User Hold - Put connected call on hold | ||
| | |Ok | ||
|---- | |---- | ||
|User Hold Retrieve - Retrieve call on hold | |User Hold Retrieve - Retrieve call on hold | ||
| | |Ok | ||
|---- | |---- | ||
|User Transfer - Transfer with Consult | |User Transfer - Transfer with Consult | ||
| | |Nok(myPBX), Ok(Tapi/Soap) | ||
|---- | |---- | ||
|User Transfer - Transfer with Consult (Alerting only) | |User Transfer - Transfer with Consult (Alerting only) | ||
| | |Nok(myPBX), Ok(Tapi/Soap) | ||
|---- | |---- | ||
|User Transfer - Blind Transfer | |User Transfer - Blind Transfer | ||
| | |Ok, Ok(Tapi/Soap) | ||
|---- | |---- | ||
|3PTY - Make 3rd Party Call | |3PTY - Make 3rd Party Call | ||
| | |Nok(myPBX), Nok(Tapi/Soap) | ||
|---- | |---- | ||
|Connected Number Update on Display | |Connected Number Update on Display | ||
| | |No | ||
|} | |} | ||
* | * tested with myPBX and TSP(8150)only | ||
== Configuration == | == Configuration == | ||
Line 466: | Line 538: | ||
The device still needs the IP address of the PBX to register at and the name of the user for whom the registration shall be made. Click on ''Show advanced settings'' in order to enter as ''Domain'' name the IP address of your innovaphone PBX. | The device still needs the IP address of the PBX to register at and the name of the user for whom the registration shall be made. Click on ''Show advanced settings'' in order to enter as ''Domain'' name the IP address of your innovaphone PBX. | ||
Please note that the registration credentials configured at the Gigaset phone use the ''number'' of the corresponding PBX object, not its name. Registration by using the name is also possible, but will result in CGPN display problems when making calls from the Gigaset phone to a mobility enabled user. | Please note that the registration credentials configured at the Gigaset phone use the ''number'' of the corresponding PBX object, not its name. Registration by using the name is also possible, but will result in CGPN display problems when making calls from the Gigaset phone to a mobility enabled user. | ||
When using the Reverse Proxy, you have to set the protocol to TCP instead of UDP | |||
[[Image:Siemens Gigaset N510IP PRO - Gigaset_Telefonie_Connection_ENG.png]] | [[Image:Siemens Gigaset N510IP PRO - Gigaset_Telefonie_Connection_ENG.png]] | ||
Line 491: | Line 565: | ||
====Enhanced VoIP Settings==== | ====Enhanced VoIP Settings==== | ||
If the device is used in a hosted setup, make sure that the following settings are configured: | |||
* Automatic Negotiation of DTMF transmission: '''Yes''' | |||
* Find target addr. automatically: '''Yes''' | |||
At last you can configure some enhanced VoIP Settings like the handling of the "R" button. For more information have a look at the configuration description in the Gigaset manual. | At last you can configure some enhanced VoIP Settings like the handling of the "R" button. For more information have a look at the configuration description in the Gigaset manual. | ||
[[Image:Siemens Gigaset N510IP PRO - Gigaset_advanced_VoIP_Settings_ENG.png]] | [[Image:Siemens Gigaset N510IP PRO - Gigaset_advanced_VoIP_Settings_ENG.png]] | ||
=== Known problems === | |||
==== innovaphone PBX Version 12 ==== | |||
With the upcoming version 12 from innovaphone AG we have implemented the security feature [https://tools.ietf.org/html/rfc3261#section-22.4 SIP digest authentication] . If the client does not support this feature the PBX will reject the registration. | |||
There is a config option to avoid this if you use a older firmware. | |||
http://ip-of-pbx/!config change SIP /disable-digest-replay-check | |||
http://ip-of-pbx/!config write | |||
http://ip-of-pbx/!config activate | |||
This problem has been '''fixed by Gigaset with N510 Firmware 42.240''', November 2016 and later | |||
==== MoH ==== | |||
Customer reported that even when choosing as Providerprofile ''innovaphonePBX'', MoH was not audible when a call was put on hold by the Gigaset device. The reason for this is that the Gigaset signals the hold using a "sendonly" instead of an "inactive" SDP-attribute. | |||
To fix this error, you can configure the innovaphone PBX to ignore the wrong hold-signaling: | |||
http://ip-of-pbx/!config add SIP /take-sendonly-as-inactive | |||
http://ip-of-pbx/!config write | |||
http://ip-of-pbx/!config activate | |||
Please keep in mind that this option will affect all SIP/UDP communication. So if you have for example another 3rd party SIP-device, which wants to play its own MOH - it will not work anymore. | |||
==== Usernames with whitespace ==== | |||
Customer reported that when registering a Gigaset-device at an object-name with whitespace (e.g. John Doe), because of a bug on the Gigaset SIP-stack ut will not be possible to put a remote device on hold. As a workaround, don't remove the whitespace from the object-name (e.g. JohnDoe). | |||
==== Recalling DECT device after transfer ==== | |||
With firmware v43, when you make a call transfer from a DECT phone to somewhere else, ~15 seconds you receive a recall call on the DECT phone. | |||
Make a downgrade to v42 to work arround the problem. | |||
The same happens in the gigaset N720 multi cell environment with firmwares above 098 | |||
==== innovaphone PBX Version 13 and Chat App ==== | |||
When using myApps to send chat messages to a user, the PBX broadcasts the IM-SETUP (instant-message) to all registered endpoints of the addressed user. Customer reported that Gigaset seems to take this as a regular media call and the phone starts ringing upon receiving a chat message, where in fact this is an instant messaging call. Bug needs to be reported to Gigaset. (Some newer systems of the N5xx series have an option to activate or disable the response to those IM messages.) | |||
[[Category:Compat|{{PAGENAME}}]] | [[Category:Compat|{{PAGENAME}}]] |
Latest revision as of 14:49, 30 November 2022
Summary
The Gigaset N510IP PRO DECT base-station supports all required innovaphone features and is therefore qualified as recommended product.
The usage of wideband codecs of the phone were tested successfully. The integration of the innovaphone voicemail in the Gigaset solution is possible. The message waiting indication will be displayed on the handsets. The handsets support 3-party conference calls.
The Gigaset N510IP PRO DECT base-station was tested successfully also in a hosted setup. The test results are the same as if the N510IP is used in a normal (in the same LAN as the PBX) setup. It is not required to activate MediaRelay on the Frontend.
Certification Status
The tests for this product have been completed.
Testing of this product has been finalized September 6th, 2013.
Version
Firmware Version:
- 42.078 (420780000000 / V42.00)
innovaphone Firmware:
- V10 SR3
- TSP 8150
Test Setup
Device Setup
Tested feature | Result |
---|---|
Register Device w/o specific configuration (requires DHCP) | No |
DHCP is default | Yes |
DHCP yields timeserver and time displays correctly | No, set static to public NTP server |
SNTP config has TZ string for timezone/dst autoconfig | No, set static to public NTP server |
DHCP yields correct default gateway | Yes |
Device supports magic registration (e.g. by serial) | No |
Fixed registrations works | Yes |
Device registers w/o Extension (just by name) | Yes |
Device registers by name with non-latin1 characters (e.g. UserÄÖÜ) | Yes |
Device registers by extension | Yes |
Device registers with password | Yes |
Device registers multiple identities | Yes |
2nd GK is supported | According to gigaset-wiki only by DNS according to RFC3263 |
Device supports Redirection of Registration (Master redirects to Slave) | No |
Device supports STUN protocol | Yes |
Device sends NAT - keepalive messages | Yes |
Device refreshes the PBX registration | Yes |
Device supports SIP over TCP | Yes tested in LAN setup.
Hosting Setup, Yes tested with Gigaset Firmware 42.250 (422500000000 / V42.00) and innovaphone firmware V13r2sr15 in myApps Cloud. Media Relay needs to be ticked at the Hardware ID of the User Object where the N510 IP PRO is registered. |
Device supports SRTP | Not tested, needs SIPS |
Device supports SIPS (SIP over TLS) | Not OK, registration fails |
Device supports HTTPS | Not for Admin access on the Web-page, probably as HTTP-client to retrieve firmware/configuration from remote servers |
Device supports VAD (Voice activity detection) | Not tested, according to manual supported |
Supported menu languages | many, check product specifications |
3-party conference | Yes |
Test Results
Basic Call
Tested feature | Result with MR |
---|---|
call using g711a | Yes |
call using g711u | Yes |
call using g729 | Yes |
call using g722 | Yes |
Overlapped sending | No |
Device sets up an early media channel for incoming calls | N/A |
Device sets up an early media channel for outgoing calls | Yes |
Device shows called id number | Yes |
Device shows called id name | Yes |
Device shows called id display info | Yes |
Fax using T.38 | N/A |
CGPN can be suppressed | Yes |
Reverse Media Negotiation | Yes |
Device shows CDPN/CGPN on incoming call | Yes |
Device shows CDPN/CGPN on outgoing call | Yes |
Device shows connected number | No |
Device shows diverting number | No |
Device supports distinctive ringing | Yes |
Device supports asymetric codec negotiation | Not tested |
Device supports codec renegotiation during a conversation | Yes |
Device shows correct display message in case of busy CDPN | Yes |
Device shows correct display message in case of not existing CDPN | No, it says "Not available" |
Device shows correct display message in case that the call is declined | Yes |
3party conference possible | Yes |
Device supports display updates during call(needed for Directory Search object) | No |
Long Time Call (>30 min) works? | Yes |
Incoming SRTP call - SRTP not enabled on DUT | Yes |
Incoming SRTP call - SRTP enabled on DUT | Not tested, requires sips |
Voice Quality OK? | Yes |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | OK |
DTMF tones received correctly | OK, DTMFs are sent as RTP-Events (no DTMF dependent function on Gigaset device) |
Hold/Retrieve
Tested feature | Result |
---|---|
Device handles incoming hold correctly | Yes |
Device can put a call on hold using correctly(inactive or sendonly) | Yes |
Transfer with consultation
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes | Yes |
inno1 calls testphone. testphone transfers to inno2. | Yes | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes | Yes |
testphone calls inno1. testphone transfers to inno2. | Yes | Yes |
Transfer without consultation (alerting only)
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes | Yes |
inno1 calls testphone. testphone transfers to inno2. | Yes | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes | Yes |
testphone calls inno1. testphone transfers to inno2. | Yes | Yes |
Blind Transfer
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes |
inno1 calls testphone. testphone transfers to inno2. | N/A, device does only transfer with consultation |
testphone calls inno1. inno1 transfers to inno2. | Yes |
testphone calls inno1. testphone transfers to inno2. | N/A, device does only transfer with consultation |
Blind Transfer (alerting only)
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes |
inno1 calls testphone. testphone transfers to inno2. | N/A, device does only transfer with consultation |
testphone calls inno1. inno1 transfers to inno2. | Yes |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
testphone makes call to a Broadcast Group. inno1 picks up. | Yes |
inno1 makes call to a Broadcast Group. testphone picks up. | Yes |
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. | Yes |
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. | Yes |
inno1 makes call to a Waiting Queue. testphone picks up. | Yes |
DTMF Features
Tested feature | Result |
---|---|
CFU Activate/Deactivate | Ok |
CFB Activate/Deactivate | Ok |
CFNR Activate/Deactivate | Ok |
Pickup Group | Ok |
Pickup Directed | Ok |
Park/Unpark | Ok |
Park To/Unpark From | Ok |
Call Completion Busy | Nok, Gigaset rejects incoming call for starting CCBS/CCNR |
Call Completion Cancel | Not tested, since CCBS/CCNR does not work |
Join Group/Leave Group | Ok |
Join All Groups/Leave All Groups | Ok |
Enable mobility/Disable mobility | Not tested, feature is invoked by mobile phone |
Enable mobility cw/Disable mobility cw | Not tested, feature is invoked by mobile phone |
Set presence | Ok |
Other Features
Directory
Tested feature | Result |
---|---|
Device built-in directory | |
Exists | Yes |
Can be dialled from | Yes |
Does CLI resolution | Yes |
display update if directory object is used? | Yes |
- It is possible to configure a connection to an online source like DE - Klicktel. Please take a look into the manual or configuration.
- It is possible to import and export the local Phonebook.
- You can add the call to the local phonebook from the call-list.
Tested feature | Result |
---|---|
External LDAP Server supported | Yes, tested with Estos Metadir. PBX not supported as external LDAP server and LDAPS not supported. |
Can be dialled from | Yes |
Does CLI resolution | Yes |
display update if directory object is used? | Yes |
Keys
Tested feature | Result |
---|---|
Device has speed dial keys | Yes, depending on handset |
Device has programmable function keys | Yes, depending on handset |
Device has partner keys | No |
CTI Features (with SOAP / TAPI / myPBX)
Tested feature | Result |
---|---|
User Call - outgoing call | Ok |
User Connect - Answer incoming call | Ok |
User Reject - Reject alerting call | Ok |
User Disconnect - Disconnect active call | Ok |
User Hold - Put connected call on hold | Ok |
User Hold Retrieve - Retrieve call on hold | Ok |
User Transfer - Transfer with Consult | Nok(myPBX), Ok(Tapi/Soap) |
User Transfer - Transfer with Consult (Alerting only) | Nok(myPBX), Ok(Tapi/Soap) |
User Transfer - Blind Transfer | Ok, Ok(Tapi/Soap) |
3PTY - Make 3rd Party Call | Nok(myPBX), Nok(Tapi/Soap) |
Connected Number Update on Display | No |
- tested with myPBX and TSP(8150)only
Configuration
innovaphone configuration
Add a new PBX object of type "user":
3rd party product configuration
IP Configuration
First you have to configure the general IP Configuration for the base-station.
- IP Address
- Subnet Mask
- Default Gateway
- DNS
Telephony Connection
In the next step you have to create a registration from the DECT/IP base-station to the PBX. Go to Telephony->Connections and edit the first entry.
Click on Select Provider and choose your country and innovaphonePBX. This will ensure that all settings are configured correctly.
The device still needs the IP address of the PBX to register at and the name of the user for whom the registration shall be made. Click on Show advanced settings in order to enter as Domain name the IP address of your innovaphone PBX.
Please note that the registration credentials configured at the Gigaset phone use the number of the corresponding PBX object, not its name. Registration by using the name is also possible, but will result in CGPN display problems when making calls from the Gigaset phone to a mobility enabled user.
When using the Reverse Proxy, you have to set the protocol to TCP instead of UDP
Number Assignment
If you have more than one DECT handset registered to your base-station, you can use the Telephony->Number Assignment menu to assign a DECT handset to a specific PBX registration.
To work with CTI clients like myPBX we need to configure the Call Manager with the handset that should handle this CTI calls and the mode (headset/handsfree).
Voicemail
To get the current voicemail status displayed on your DECT handset, you have to enter the corresponding innovaphone voicemail number in the Telephony->Network Mailbox menu.
Phone Directory - Adress Book
You can import/export and save the local phonebook. Have a look at the configuration description in the Gigaset manual.
Enhanced VoIP Settings
If the device is used in a hosted setup, make sure that the following settings are configured:
- Automatic Negotiation of DTMF transmission: Yes
- Find target addr. automatically: Yes
At last you can configure some enhanced VoIP Settings like the handling of the "R" button. For more information have a look at the configuration description in the Gigaset manual.
Known problems
innovaphone PBX Version 12
With the upcoming version 12 from innovaphone AG we have implemented the security feature SIP digest authentication . If the client does not support this feature the PBX will reject the registration.
There is a config option to avoid this if you use a older firmware.
http://ip-of-pbx/!config change SIP /disable-digest-replay-check http://ip-of-pbx/!config write http://ip-of-pbx/!config activate
This problem has been fixed by Gigaset with N510 Firmware 42.240, November 2016 and later
MoH
Customer reported that even when choosing as Providerprofile innovaphonePBX, MoH was not audible when a call was put on hold by the Gigaset device. The reason for this is that the Gigaset signals the hold using a "sendonly" instead of an "inactive" SDP-attribute. To fix this error, you can configure the innovaphone PBX to ignore the wrong hold-signaling:
http://ip-of-pbx/!config add SIP /take-sendonly-as-inactive http://ip-of-pbx/!config write http://ip-of-pbx/!config activate
Please keep in mind that this option will affect all SIP/UDP communication. So if you have for example another 3rd party SIP-device, which wants to play its own MOH - it will not work anymore.
Usernames with whitespace
Customer reported that when registering a Gigaset-device at an object-name with whitespace (e.g. John Doe), because of a bug on the Gigaset SIP-stack ut will not be possible to put a remote device on hold. As a workaround, don't remove the whitespace from the object-name (e.g. JohnDoe).
Recalling DECT device after transfer
With firmware v43, when you make a call transfer from a DECT phone to somewhere else, ~15 seconds you receive a recall call on the DECT phone. Make a downgrade to v42 to work arround the problem. The same happens in the gigaset N720 multi cell environment with firmwares above 098
innovaphone PBX Version 13 and Chat App
When using myApps to send chat messages to a user, the PBX broadcasts the IM-SETUP (instant-message) to all registered endpoints of the addressed user. Customer reported that Gigaset seems to take this as a regular media call and the phone starts ringing upon receiving a chat message, where in fact this is an instant messaging call. Bug needs to be reported to Gigaset. (Some newer systems of the N5xx series have an option to activate or disable the response to those IM messages.)