User talk:2ntestteam: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
mNo edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Certification Status==
Certification:
 
* 01/2017 - done
{{Template:Compat Status "tested"}}
<!--{{Template:Compat Status "in progress"}} -->
<!-- {{Template:Compat Status "certified"|certificate=2N Helios IP - 2N - SIP_Terminal-_product-cert.pdf}}-->
<!-- {{Template:Compat Status "tested"}} -->
<!-- {{Template:Compat Status "rejected"}} -->
 
Testing of this product has been finalized January 16th, 2017.
 
 
 
==Device Setup==
 
{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}
 
==Test Results==
 
{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}
 
=== Basic Call ===
 
{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}
 
=== DTMF ===
 
{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}
 
=== Hold/Retrieve ===
 
{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}
 
=== Transfer with consultation ===
 
{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}
 
=== Transfer with consultation (alerting only) ===
 
{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}
 
=== Blind Transfer ===
 
{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}
 
=== Blind Transfer (alerting only)===
 
{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}
 
=== Broadcast Group & Waiting Queue ===
 
{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}
 
=== DTMF Features ===
 
{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}
 
==Other Features==
 
===Directory===
 
{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}
 
 
 
{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}
 
===Keys===
 
{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}
 
 
===CTI Features (with SOAP / TAPI / myPBX) ===
 
{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}
 
===UC Features===
 
{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}
 
== Configuration ==
 
 
=== 3rd party product configuration ===

Latest revision as of 14:16, 6 February 2017

Certification:

  • 01/2017 - done
Retrieved from "https://wiki.innovaphone.com/index.php?title=User_talk:2ntestteam&oldid=45711"