Howto:MXP T150 - Tandberg - H.323 Testreport: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
m (New page: ==Version== Firmware Version: L4.2, Sicherheit Hardware Version: 38A00626 ==Device Setup== {| border="1" !Tested feature !Result |---- |Register Device w/o specific configuration (re...)
 
 
(36 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Summary==
The device should register with SIP (refer to the [[Howto:MXP T150 - Tandberg - SIP Testreport|SIP Test Report]]) at the innovaphone PBX, as with H.323 no call transfer is possible.
Calls between T150 phones will work fine then, provided (as of now unreleased) V7 firmware is used on the PBX (see [[#Version|Version]] below).  Calls between innovaphone devices and T150 are unreliable.
==Version==
==Version==
Firmware Version:
T150 - Firmware Version:
  L4.2, Sicherheit
  L4.2, Security
 
T150 - Hardware Version:
38A02282
 
innovaphone IP800 - Firmware Version:
V7(08-70015)
 
==Current test state==
{{Template:Compat Status "tested"}}
<!--{{Template:Compat Status "in progress"}}-->
<!--{{Template:Compat Status "certified"|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}}-->
<!-- {{Template:Compat Status "tested"}} -->
<!-- {{Template:Compat Status "rejected"}} -->
 
Testing of this product has been finalized March 20th, 2008.


Hardware Version:
==Testing Enviroment==
38A00626
 
===Scenario: Tandberg only phone equipment===
 
[[Image:MXP T150 - Tandberg - H.323 Testreport 1.PNG]]


==Device Setup==
==Device Setup==
Line 13: Line 36:
|----
|----
|Register Device w/o specific configuration (requires DHCP, GK detection and “magic” alias)
|Register Device w/o specific configuration (requires DHCP, GK detection and “magic” alias)
|
|No
|----
|----
|DHCP is default
|DHCP is default
|
|Yes
|----
|----
|DHCP works
|DHCP works
|
|Yes
|----
|----
|DHCP yields timeserver and time displays correctly
|DHCP yields timeserver and time displays correctly
|
|Yes
|----
|----
|SNTP config has TZ string for timezone/dst autoconfig
|SNTP config has TZ string for timezone/dst autoconfig
|
|No
|----
|----
|DHCP yields correct default gateway
|DHCP yields correct default gateway
|
|Yes
|----
|----
|Device supports magic registration (e.g. by serial)
|Device supports magic registration (e.g. by serial)
|
|No
|----
|----
|GK discovery works
|GK discovery works
|
|Yes
|----
|----
|Fixed GK registrations works
|Fixed GK registrations works
|
|No
|----
|----
|Registrations supports GK-ID
|Registrations supports GK-ID
|
|No
|----
|----
|Device registers w/o Extension (just by name)
|Device registers w/o Extension (just by name)
|
|Yes
|----
|----
|Device registers by extension
|Device registers by extension
|
|Yes
|----
|----
|Device registers with H.235 password
|Device registers with H.235 password
|
|Yes, but no calls possible
|----
|----
|Device registers multiple identities
|Device registers multiple identities
|
|No
|----
|Device can configure IP address, GK attributes (gk-id, gk-ip, alias) from DHCP (vendor specific)
|
|}
|}


Line 65: Line 85:
!Tested feature
!Tested feature
!Result  
!Result  
|----
|video call
|Yes
|----
|----
|'''call using g711a'''
|'''call using g711a'''
|
|Yes
|----
|----
|'''call using g711u'''
|'''call using g711u'''
|
|Yes
|----
|----
|call using g723
|call using g723
|
|No
|----
|----
|call using g729
|call using g729
|
|No
|----
|----
|Overlapped sending
|Overlapped sending
|
|No
|----
|----
|'''early media channel'''
|'''early media channel'''
|
|No
|----
|----
|Fax using T.38
|Fax using T.38
|
|N/A
|----
|----
|CGPN can be supressed
|CGPN can be supressed
|
|No
|----
|----
|'''Reverse Media Negotiaton'''
|'''Reverse Media Negotiaton'''
|
|No
|----
|----
|Voice Quality OK?
|Voice Quality OK?
|
|Yes
|}
|}
<!--Calls from T150 to IP230 have one way audio from IP230 to T150 only. Calls from IP230 to T150 are OK.-->


=== DTMF ===
=== DTMF ===
Line 104: Line 129:
|----
|----
|'''DTMF tones sent correctly'''
|'''DTMF tones sent correctly'''
|
|Yes
|----
|----
|'''DTMF tones received correctly'''
|'''DTMF tones received correctly'''
|
|Yes
|----
|----
|Device switches to DTMF mode automatically after connect
|Device switches to DTMF mode automatically after connect
|
|Yes
|}
|}


Line 120: Line 145:
|----
|----
|'''Call can be put on hold'''  
|'''Call can be put on hold'''  
|
|Yes, but sometimes without MoH
|----
|----
|Held end hears music on hold / announcement from PBX
|Held end hears music on hold / announcement from PBX
|
|Yes
|----
|----
|Held end hears music on hold / announcement from provider
|'''Call returns to transferring device if the third Endpoint is not available'''
|
|?
|----
|can put call on hold
|
|----
|can create secondary outgoing call
|
|----
|can accept a secondary incoming call
|
|----
|can terminate either call and retrieve remaining call
|
|----
|can toggle between both calls, media stream ok
|
|----
|call can be held remotely and retrieved remotely, media stream ok
|
|----
|signals call hold to GK
|
|}
|}


=== Transfer with consultation ===
=== Transfer with consultation ===


{| border="1"  
{| border="1"  
!Tested feature
!Tested feature
!Result  
!Result
|----
|Device can be transferred by far end (check media ok, display on all 3 phones ok)
|----
|A calls T, A calls B, A xfers T to B
|
|----
|A calls B, B calls T, A xfers B to T
|
|----
|T calls A, B calls A, A xfers T to B
|
|----
|----
|B calls A, T calls A, A xfers B to T
|'''Call can be transfered'''
|
|No
|----
|----
|Device can transfer both call ends (media ok, display on all 3 phones ok?). 
|Held end hears music on hold
|No
|----
|----
|T calls A, t calls B, t xfers A to B
|'''Call returns to transferring device if the third Endpoint is not available'''
|
|No
|----
|T calls B, t calls A, t xfers B to A
|
|----
|A calls t, B calls t, t xfers A to B
|
|----
|B calls t, A calls t, t xfers B to A
|
|}
|}


Hints:
=== Transfer with consultation (alerting only) ===
*A - first innovaphone Terminal
*B - second innovaphone Terminal
*T - tested 3rd party Terminal
 
 
 
=== Blind Transfer ===


{| border="1"  
{| border="1"  
!Tested feature
!Tested feature
!Result  
!Result
|----
|----
|Device can be transferred by far end (check media ok, display on all 3 phones ok)
|'''Call can be transfered'''
|No
|----
|----
|A calls T, A xfers T to B
|Held end hears music on hold or dialing tone
|
|No
|----
|----
|A calls B, A xfers B to T
|'''Call returns to transferring device if the third Endpoint is not available'''
|
|No
|----
|T calls A, A xfers to B
|
|----
|Device can transfer blindly (media ok, display on all 3 phones ok?).
|----
|T calls A, T xfers to B
|
|----
|A calls T, T xfers to B
|
|}
|}


===Call Forward===


{| border="1"
!Tested feature
!Result
|----
|Device displays current call forwarding (interrogation)
|----
|CFU
|
|----
|CFNR
|
|----
|CFB
|
|----
|Device can set call forwarding
|
|}
==Other Features==
===Directory===
{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|----
|Exists
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|}
===Hands free===
{| border="1"
!Tested feature
!Result
|----
|Loudspeaker operation works fine
|
|----
|Hands free works fine
|
|----
|Volume adjustable during call
|
|}
===Keys===
{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|
|----
|Device has programmable function keys
|
|}






== Related Articles ==
== Related Articles ==
<!--*[[Main_Page|wiki-innovaphone]]-->
*[[Howto:MXP_T150_-_Tandberg_-_SIP_Testreport|MXP T150 - Tandberg - SIP Testreport]]

Latest revision as of 16:12, 6 October 2009

Summary

The device should register with SIP (refer to the SIP Test Report) at the innovaphone PBX, as with H.323 no call transfer is possible. Calls between T150 phones will work fine then, provided (as of now unreleased) V7 firmware is used on the PBX (see Version below). Calls between innovaphone devices and T150 are unreliable.

Version

T150 - Firmware Version: 

L4.2, Security

T150 - Hardware Version: 

38A02282

innovaphone IP800 - Firmware Version: 

V7(08-70015)

Current test state

The tests for this product have been completed.

Testing of this product has been finalized March 20th, 2008.

Testing Enviroment

Scenario: Tandberg only phone equipment

MXP T150 - Tandberg - H.323 Testreport 1.PNG

Device Setup

Tested feature Result
Register Device w/o specific configuration (requires DHCP, GK detection and “magic” alias) No
DHCP is default Yes
DHCP works Yes
DHCP yields timeserver and time displays correctly Yes
SNTP config has TZ string for timezone/dst autoconfig No
DHCP yields correct default gateway Yes
Device supports magic registration (e.g. by serial) No
GK discovery works Yes
Fixed GK registrations works No
Registrations supports GK-ID No
Device registers w/o Extension (just by name) Yes
Device registers by extension Yes
Device registers with H.235 password Yes, but no calls possible
Device registers multiple identities No

Test Results

Basic Call

Tested feature Result
video call Yes
call using g711a Yes
call using g711u Yes
call using g723 No
call using g729 No
Overlapped sending No
early media channel No
Fax using T.38 N/A
CGPN can be supressed No
Reverse Media Negotiaton No
Voice Quality OK? Yes


DTMF

Tested feature Result
DTMF tones sent correctly Yes
DTMF tones received correctly Yes
Device switches to DTMF mode automatically after connect Yes

Hold/Retrieve

Tested feature Result
Call can be put on hold Yes, but sometimes without MoH
Held end hears music on hold / announcement from PBX Yes
Call returns to transferring device if the third Endpoint is not available ?

Transfer with consultation

Tested feature Result
Call can be transfered No
Held end hears music on hold No
Call returns to transferring device if the third Endpoint is not available No

Transfer with consultation (alerting only)

Tested feature Result
Call can be transfered No
Held end hears music on hold or dialing tone No
Call returns to transferring device if the third Endpoint is not available No



Related Articles

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:MXP_T150_-_Tandberg_-_H.323_Testreport&oldid=15184"