Howto:MXP T150 - Tandberg - SIP Testreport: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
 
(25 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Summary==
The device should register with SIP at the innovaphone PBX, as with H.323 no call transfer is possible (refer to the [[Howto:MXP T150 - Tandberg - H.323 Testreport|SIP Test Report]]).
Calls between T150 phones will work fine then, provided (as of now unreleased) V7 firmware is used on the PBX (see [[#Version|Version]] below).  Calls between innovaphone devices and T150 are unreliable.
==Version==
==Version==
Firmware Version:
T150 - Firmware Version:
  L4.2, Sicherheit
  L4.2, Security


Hardware Version:
T150 - Hardware Version:
  38A02282
  38A02282
innovaphone IP800 - Firmware Version:
V7(08-70015)
==Current test state==
{{Template:Compat Status "tested"}}
<!--{{Template:Compat Status "in progress"}}-->
<!--{{Template:Compat Status "certified"|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}}-->
<!-- {{Template:Compat Status "tested"}} -->
<!-- {{Template:Compat Status "rejected"}} -->
Testing of this product has been finalized March 20th, 2008.
==Testing Enviroment==
===Scenario 1(S1): Tandberg only phone equipment===
[[Image:MXP T150 - Tandberg - SIP Testreport 1.PNG]]
===Scenario 2(S2): mixed vendors phone equipment connected via SIP===
[[Image:MXP T150 - Tandberg - SIP Testreport 2.PNG]]
===Scenario 3(S3): mixed vendors phone equipment connected via H.323===
[[Image:MXP T150 - Tandberg - SIP Testreport 3.PNG]]


==Device Setup==
==Device Setup==
Line 59: Line 90:


==Test Results==
==Test Results==
For more information on the test procedure, please read the following wiki article: [[Internal:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.
For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.


=== Basic Call ===
=== Basic Call ===
Line 65: Line 96:
{| border="1"  
{| border="1"  
!Tested feature
!Tested feature
!Result  
!Result S1
!Result S2
!Result S3
|----
|video call
|Yes
|?
|?
|----
|----
|'''call using g711a'''
|'''call using g711a'''
|NOK
|Yes
|No
|No
|----
|----
|'''call using g711u'''
|'''call using g711u'''
|NOK
|Yes
|No
|No
|----
|----
|call using g723
|call using g723
|No
|No
|No
|No
|----
|----
|call using g729
|call using g729
|No
|No
|No
|No
|----
|----
|Overlapped sending
|Overlapped sending
|No
|No
|No
|No
|----
|----
|'''early media channel'''
|'''early media channel'''
|
|Not tested
|Not tested
|Not tested
|----
|----
|'''Device shows called id number'''
|'''Device shows called id number'''
|Yes
|Yes
|Yes
|Yes
|----
|----
|'''Device shows called id name'''
|'''Device shows called id name'''
|No
|No
|No
|No
|----
|----
|'''evice shows called id display info'''
|'''Device shows called id display info'''
|No
|No
|No
|No
|----
|Fax using T.38
|N/A
|----
|CGPN can be supressed
|N/A
|----
|----
|'''Reverse Media Negotiaton'''
|'''Reverse Media Negotiaton'''
|
|Not tested
|Not tested
|Not tested
|----
|----
|Voice Quality OK?
|Voice Quality OK?
|
|Yes
|Yes
|Yes
|}
|}


Line 116: Line 170:
{| border="1"  
{| border="1"  
!Tested feature
!Tested feature
!Result  
!Result S1
!Result S2
!Result S3
|----
|----
|'''DTMF tones sent correctly'''
|'''DTMF tones sent correctly'''
|Yes
|Yes
|Yes
|Yes
|----
|----
|'''DTMF tones received correctly'''
|'''DTMF tones received correctly'''
|Yes
|Yes
|Yes
|Yes
|----
|----
|'''Device switches to DTMF mode automatically after connect'''
|'''Device switches to DTMF mode automatically after connect'''
|Yes
|Yes
|Yes
|Yes
|}
|}
Line 132: Line 194:
{| border="1"  
{| border="1"  
!Tested feature
!Tested feature
!Result  
!Result S1
!Result S2
!Result S3
|----
|----
|'''Call can be put on hold'''  
|'''Call can be put on hold'''  
|
|Yes
|?
|?
|----
|----
|Held end hears music on hold / announcement from PBX
|Held end hears music on hold / announcement from PBX
|
|Yes
|----
|?
|Held end hears music on hold / announcement from provider
|?
|
|}
|}


Line 148: Line 213:
{| border="1"  
{| border="1"  
!Tested feature
!Tested feature
!Result  
!Result S1
!Result S2
!Result S3
|----
|----
|'''Call can be transfered'''
|'''Call can be transfered'''
|
|Yes
|No
|No
|----
|----
|Held end hears music on hold
|Held end hears music on hold
|
|Yes
|No
|No
|----
|----
|'''Call returns to transferring device if the third Endpoint is not available'''
|'''Call returns to transferring device if the third Endpoint is not available'''
|
|?
|?
|?
|}
|}


Line 164: Line 237:
{| border="1"  
{| border="1"  
!Tested feature
!Tested feature
!Result  
!Result S1
!Result S2
!Result S3
|----
|----
|'''Call can be transfered'''
|'''Call can be transfered'''
|
|Yes
|No
|No
|----
|----
|Held end hears music on hold or dialing tone
|Held end hears music on hold or dialing tone
|
|Yes
|No
|No
|----
|----
|'''Call returns to transferring device if the third  
|'''Call returns to transferring device if the third Endpoint is not available'''
Endpoint is not available'''
|?
|
|?
|}
|?
 
=== Blind Transfer ===
 
{| border="1"
!Tested feature
!Result
|----
|Call can be transfered
|
|----
|Held end hears dialing tone
|
|}
|}
=== Broadcast Group & Waiting Queue ===
{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}
==Other Features==
===Directory===
{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|----
|Exists
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|}
===Hands free===
{| border="1"
!Tested feature
!Result
|----
|Loudspeaker operation works fine
|
|----
|Hands free works fine
|
|----
|Volume adjustable during call
|
|}
===Keys===
{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|
|----
|Device has programmable function keys
|
|}


== Related Articles ==
== Related Articles ==
<!--*[[Main_Page|wiki-innovaphone]]-->
*[[Howto:MXP_T150_-_Tandberg_-_H.323_Testreport|MXP T150 - Tandberg - H.323 Testreport]]

Latest revision as of 16:12, 6 October 2009

Summary

The device should register with SIP at the innovaphone PBX, as with H.323 no call transfer is possible (refer to the SIP Test Report). Calls between T150 phones will work fine then, provided (as of now unreleased) V7 firmware is used on the PBX (see Version below). Calls between innovaphone devices and T150 are unreliable.

Version

T150 - Firmware Version:

L4.2, Security

T150 - Hardware Version:

38A02282

innovaphone IP800 - Firmware Version:

V7(08-70015)

Current test state

The tests for this product have been completed.

Testing of this product has been finalized March 20th, 2008.

Testing Enviroment

Scenario 1(S1): Tandberg only phone equipment

MXP T150 - Tandberg - SIP Testreport 1.PNG

Scenario 2(S2): mixed vendors phone equipment connected via SIP

MXP T150 - Tandberg - SIP Testreport 2.PNG

Scenario 3(S3): mixed vendors phone equipment connected via H.323

MXP T150 - Tandberg - SIP Testreport 3.PNG

Device Setup

Tested feature Result
Register Device w/o specific configuration (requires DHCP, GK detection and “magic” alias) No
DHCP is default Yes
DHCP works Yes
DHCP yields timeserver and time displays correctly Yes
SNTP config has TZ string for timezone/dst autoconfig No
DHCP yields correct default gateway Yes
Device supports magic registration (e.g. by serial) No
GK discovery works Yes
Fixed GK registrations works No
Registrations supports GK-ID No
Device registers w/o Extension (just by name) Yes
Device registers by extension Yes
Device registers with H.235 password Yes, but no calls possible
Device registers multiple identities No
Device can configure IP address, GK attributes (gk-id, gk-ip, alias) from DHCP (vendor specific) N/A

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature Result S1 Result S2 Result S3
video call Yes ? ?
call using g711a Yes No No
call using g711u Yes No No
call using g723 No No No
call using g729 No No No
Overlapped sending No No No
early media channel Not tested Not tested Not tested
Device shows called id number Yes Yes Yes
Device shows called id name No No No
Device shows called id display info No No No
Reverse Media Negotiaton Not tested Not tested Not tested
Voice Quality OK? Yes Yes Yes


Basic call to T150(SIP on PBX) with no media from T150 to IP230(H.323 on PBX).

Basic call to T150(SIP on PBX) with no media at all IP230(SIP on PBX), G711u from T150 and G711A from IP230.

DTMF

Tested feature Result S1 Result S2 Result S3
DTMF tones sent correctly Yes Yes Yes
DTMF tones received correctly Yes Yes Yes
Device switches to DTMF mode automatically after connect Yes Yes Yes

Hold/Retrieve

Tested feature Result S1 Result S2 Result S3
Call can be put on hold Yes ? ?
Held end hears music on hold / announcement from PBX Yes ? ?

Transfer with consultation

Tested feature Result S1 Result S2 Result S3
Call can be transfered Yes No No
Held end hears music on hold Yes No No
Call returns to transferring device if the third Endpoint is not available ? ? ?

Transfer with consultation (alerting only)

Tested feature Result S1 Result S2 Result S3
Call can be transfered Yes No No
Held end hears music on hold or dialing tone Yes No No
Call returns to transferring device if the third Endpoint is not available ? ? ?

Related Articles