Howto:MXP T150 - Tandberg - SIP Testreport: Difference between revisions
m (→Test Results) |
|||
(21 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
==Summary== | |||
The device should register with SIP at the innovaphone PBX, as with H.323 no call transfer is possible (refer to the [[Howto:MXP T150 - Tandberg - H.323 Testreport|SIP Test Report]]). | |||
Calls between T150 phones will work fine then, provided (as of now unreleased) V7 firmware is used on the PBX (see [[#Version|Version]] below). Calls between innovaphone devices and T150 are unreliable. | |||
==Version== | ==Version== | ||
Firmware Version: | T150 - Firmware Version: | ||
L4.2, | L4.2, Security | ||
Hardware Version: | T150 - Hardware Version: | ||
38A02282 | 38A02282 | ||
innovaphone IP800 - Firmware Version: | |||
V7(08-70015) | |||
==Current test state== | ==Current test state== | ||
{{Template:Compat Status "tested"}} | |||
{{Template:Compat Status "in progress"}} | <!--{{Template:Compat Status "in progress"}}--> | ||
<!--{{Template:Compat Status "certified"|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}}--> | <!--{{Template:Compat Status "certified"|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}}--> | ||
<!-- {{Template:Compat Status "tested"}} --> | <!-- {{Template:Compat Status "tested"}} --> | ||
<!-- {{Template:Compat Status "rejected"}} --> | <!-- {{Template:Compat Status "rejected"}} --> | ||
Testing of this product has been finalized March 20th, 2008. | |||
==Testing Enviroment== | ==Testing Enviroment== | ||
===Scenario 1: Tandberg only phone equipment=== | ===Scenario 1(S1): Tandberg only phone equipment=== | ||
[[Image:MXP T150 - Tandberg - SIP Testreport 1.PNG]] | [[Image:MXP T150 - Tandberg - SIP Testreport 1.PNG]] | ||
===Scenario 2: mixed vendors phone equipment=== | ===Scenario 2(S2): mixed vendors phone equipment connected via SIP=== | ||
[[Image:MXP T150 - Tandberg - SIP Testreport 2.PNG]] | [[Image:MXP T150 - Tandberg - SIP Testreport 2.PNG]] | ||
===Scenario 3(S3): mixed vendors phone equipment connected via H.323=== | |||
[[Image:MXP T150 - Tandberg - SIP Testreport 3.PNG]] | |||
==Device Setup== | ==Device Setup== | ||
Line 86: | Line 98: | ||
!Result S1 | !Result S1 | ||
!Result S2 | !Result S2 | ||
!Result S3 | |||
|---- | |||
|video call | |||
|Yes | |||
|? | |||
|? | |||
|---- | |---- | ||
|'''call using g711a''' | |'''call using g711a''' | ||
|Yes | |Yes | ||
|No | |||
|No | |No | ||
|---- | |---- | ||
|'''call using g711u''' | |'''call using g711u''' | ||
|Yes | |Yes | ||
|No | |||
|No | |No | ||
|---- | |---- | ||
|call using g723 | |call using g723 | ||
|No | |||
|No | |No | ||
|No | |No | ||
|---- | |---- | ||
|call using g729 | |call using g729 | ||
|No | |||
|No | |No | ||
|No | |No | ||
|---- | |---- | ||
|Overlapped sending | |Overlapped sending | ||
|No | |||
|No | |No | ||
|No | |No | ||
|---- | |---- | ||
|'''early media channel''' | |'''early media channel''' | ||
|Not tested | |||
|Not tested | |Not tested | ||
|Not tested | |Not tested | ||
|---- | |---- | ||
|'''Device shows called id number''' | |'''Device shows called id number''' | ||
|Yes | |||
|Yes | |Yes | ||
|Yes | |Yes | ||
|---- | |---- | ||
|'''Device shows called id name''' | |'''Device shows called id name''' | ||
|No | |||
|No | |No | ||
|No | |No | ||
|---- | |---- | ||
|''' | |'''Device shows called id display info''' | ||
|No | |||
|No | |No | ||
|No | |No | ||
|---- | |---- | ||
|'''Reverse Media Negotiaton''' | |'''Reverse Media Negotiaton''' | ||
|Not tested | |||
|Not tested | |Not tested | ||
|Not tested | |Not tested | ||
|---- | |---- | ||
|Voice Quality OK? | |Voice Quality OK? | ||
|Yes | |||
|Yes | |Yes | ||
|Yes | |Yes | ||
Line 143: | Line 172: | ||
!Result S1 | !Result S1 | ||
!Result S2 | !Result S2 | ||
!Result S3 | |||
|---- | |---- | ||
|'''DTMF tones sent correctly''' | |'''DTMF tones sent correctly''' | ||
|Yes | |||
|Yes | |Yes | ||
|Yes | |Yes | ||
|---- | |---- | ||
|'''DTMF tones received correctly''' | |'''DTMF tones received correctly''' | ||
|Yes | |||
|Yes | |Yes | ||
|Yes | |Yes | ||
|---- | |---- | ||
|'''Device switches to DTMF mode automatically after connect''' | |'''Device switches to DTMF mode automatically after connect''' | ||
|Yes | |||
|Yes | |Yes | ||
|Yes | |Yes | ||
Line 161: | Line 194: | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result S1 | ||
!Result S2 | |||
!Result S3 | |||
|---- | |---- | ||
|'''Call can be put on hold''' | |'''Call can be put on hold''' | ||
| | |Yes | ||
|? | |||
|? | |||
|---- | |---- | ||
|Held end hears music on hold / announcement from PBX | |Held end hears music on hold / announcement from PBX | ||
| | |Yes | ||
| | |? | ||
|? | |||
| | |||
|} | |} | ||
Line 177: | Line 213: | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result S1 | ||
!Result S2 | |||
!Result S3 | |||
|---- | |---- | ||
|'''Call can be transfered''' | |'''Call can be transfered''' | ||
| | |Yes | ||
|No | |||
|No | |||
|---- | |---- | ||
|Held end hears music on hold | |Held end hears music on hold | ||
| | |Yes | ||
|No | |||
|No | |||
|---- | |---- | ||
|'''Call returns to transferring device if the third Endpoint is not available''' | |'''Call returns to transferring device if the third Endpoint is not available''' | ||
| | |? | ||
|? | |||
|? | |||
|} | |} | ||
Line 193: | Line 237: | ||
{| border="1" | {| border="1" | ||
!Tested feature | !Tested feature | ||
!Result | !Result S1 | ||
!Result S2 | |||
!Result S3 | |||
|---- | |---- | ||
|'''Call can be transfered''' | |'''Call can be transfered''' | ||
| | |Yes | ||
|No | |||
|No | |||
|---- | |---- | ||
|Held end hears music on hold or dialing tone | |Held end hears music on hold or dialing tone | ||
| | |Yes | ||
|No | |||
|No | |||
|---- | |---- | ||
|'''Call returns to transferring device if the third | |'''Call returns to transferring device if the third Endpoint is not available''' | ||
Endpoint is not available''' | |? | ||
| | |? | ||
|? | |||
|} | |} | ||
== Related Articles == | == Related Articles == | ||
*[[Howto:MXP_T150_-_Tandberg_-_H.323_Testreport|MXP T150 - Tandberg - H.323 Testreport]] |
Latest revision as of 16:12, 6 October 2009
Summary
The device should register with SIP at the innovaphone PBX, as with H.323 no call transfer is possible (refer to the SIP Test Report). Calls between T150 phones will work fine then, provided (as of now unreleased) V7 firmware is used on the PBX (see Version below). Calls between innovaphone devices and T150 are unreliable.
Version
T150 - Firmware Version:
L4.2, Security
T150 - Hardware Version:
38A02282
innovaphone IP800 - Firmware Version:
V7(08-70015)
Current test state
The tests for this product have been completed.
Testing of this product has been finalized March 20th, 2008.
Testing Enviroment
Scenario 1(S1): Tandberg only phone equipment
Scenario 2(S2): mixed vendors phone equipment connected via SIP
Scenario 3(S3): mixed vendors phone equipment connected via H.323
Device Setup
Tested feature | Result |
---|---|
Register Device w/o specific configuration (requires DHCP, GK detection and “magic” alias) | No |
DHCP is default | Yes |
DHCP works | Yes |
DHCP yields timeserver and time displays correctly | Yes |
SNTP config has TZ string for timezone/dst autoconfig | No |
DHCP yields correct default gateway | Yes |
Device supports magic registration (e.g. by serial) | No |
GK discovery works | Yes |
Fixed GK registrations works | No |
Registrations supports GK-ID | No |
Device registers w/o Extension (just by name) | Yes |
Device registers by extension | Yes |
Device registers with H.235 password | Yes, but no calls possible |
Device registers multiple identities | No |
Device can configure IP address, GK attributes (gk-id, gk-ip, alias) from DHCP (vendor specific) | N/A |
Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.
Basic Call
Tested feature | Result S1 | Result S2 | Result S3 |
---|---|---|---|
video call | Yes | ? | ? |
call using g711a | Yes | No | No |
call using g711u | Yes | No | No |
call using g723 | No | No | No |
call using g729 | No | No | No |
Overlapped sending | No | No | No |
early media channel | Not tested | Not tested | Not tested |
Device shows called id number | Yes | Yes | Yes |
Device shows called id name | No | No | No |
Device shows called id display info | No | No | No |
Reverse Media Negotiaton | Not tested | Not tested | Not tested |
Voice Quality OK? | Yes | Yes | Yes |
Basic call to T150(SIP on PBX) with no media from T150 to IP230(H.323 on PBX).
Basic call to T150(SIP on PBX) with no media at all IP230(SIP on PBX), G711u from T150 and G711A from IP230.
DTMF
Tested feature | Result S1 | Result S2 | Result S3 |
---|---|---|---|
DTMF tones sent correctly | Yes | Yes | Yes |
DTMF tones received correctly | Yes | Yes | Yes |
Device switches to DTMF mode automatically after connect | Yes | Yes | Yes |
Hold/Retrieve
Tested feature | Result S1 | Result S2 | Result S3 |
---|---|---|---|
Call can be put on hold | Yes | ? | ? |
Held end hears music on hold / announcement from PBX | Yes | ? | ? |
Transfer with consultation
Tested feature | Result S1 | Result S2 | Result S3 |
---|---|---|---|
Call can be transfered | Yes | No | No |
Held end hears music on hold | Yes | No | No |
Call returns to transferring device if the third Endpoint is not available | ? | ? | ? |
Transfer with consultation (alerting only)
Tested feature | Result S1 | Result S2 | Result S3 |
---|---|---|---|
Call can be transfered | Yes | No | No |
Held end hears music on hold or dialing tone | Yes | No | No |
Call returns to transferring device if the third Endpoint is not available | ? | ? | ? |