Howto:2N - VoiceBlue Lite - Testreport: Difference between revisions
m (→Product Test) |
|||
Line 75: | Line 75: | ||
===Features available via PBX DTMF Features=== | ===Features available via PBX DTMF Features=== | ||
A DTMF Digit # is used on the GSM GW to provide the end of dialing as default seting, but it also used on the PBX DTMF Feature Object. | |||
Solution 1: | |||
Change or disable "End of dialing" Digit to "+" and reduce the "Timeout for entering DTMF" on GSW GW. | |||
Solution 2: | |||
Change PBX DTMF Features to use * instead of #. | |||
====Enable/Disable CFs==== | ====Enable/Disable CFs==== |
Revision as of 14:47, 15 April 2009
General Information
- Product name: Mobility Extension
- Vendor: 2N
- Version: 2.00n
- Firmware: 02.07.35b02
- innovaphone Firmware:
Current test state
This product is being tested right now. The test is not yet completed.
Configured Scenario
Description
Mobility Access Features
Calls received are redirected in accordance with rules and filters defined by the user.
User Web interface for handling redirections and profiles.
Mobile Extension
Access to PBX-like functions from any registered mobile phone: call hold, call resume, conference call, switching between calls, transfer, selection of redirection profiles.
DTMF Features available via DTMF ViceBlue Lite
Call Hold
Default DTMF code 7*.
Put on hold with *7, retrieve with 9#.
Transfer
Default DTMF Code <Number>#
- Call form mobile to GSM GW
- Dial 101#
- 100 accepts the call
- Dial 7*
- Dial 102#
- 102 accepts the call
- Hang up
- 101 and 102 are connected
Blind Transfer
Default DTMF Code #<Number>#
- Call form mobile to GSM GW
- Dial 101#
- 101 accepts the call
- Dial 7*
- Dial #102#
- 102 alerting
- Hang up manually (9# doesnt work)
Folow Me
Enable/disable calls on user object from PBX to GSM.
SMS at No Answer
Enable/disable SMS via GSM to the number of mobile phone.
Features available via PBX DTMF Features
A DTMF Digit # is used on the GSM GW to provide the end of dialing as default seting, but it also used on the PBX DTMF Feature Object.
Solution 1:
Change or disable "End of dialing" Digit to "+" and reduce the "Timeout for entering DTMF" on GSW GW.
Solution 2:
Change PBX DTMF Features to use * instead of #.
Enable/Disable CFs
Mobile Least Cost Routing
VCC
Voice Call Continuity (VCC) is a feature that permits a user to continue a call on an associated phone by simply dialing the VCC service access number. The ongoing call is continued without any interruption. In the test scenario, the GSM phone calls Ext.4 via the QuesCom Gateway, then Ext.2 dials 9, the call is continued on Ext.2 and released on the GSM.
Tested call flows
Inbound to normal user
Inbound to One number user
Mobility to normal user
VCC
Fax
Inbound to user fax number
Outbound fax
Important Components
Server Requirements
- Windows,Linux, etc.
- other software requirements
Product Setup
Installation & Configuration of the vendor Software
Installation & Configuration of the innovaphone components
Product Test
SIP Interop Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description.
Basic Call
calls between mobile phone via QuesCom and innovaphone phones (both directions).
Tested feature | Result |
---|---|
call using g711a | Yes |
call using g711u | Yes |
call using g723 | Yes |
call using g729 | Yes |
Overlapped sending | Yes |
early media channel | Yes |
Fax using T.38 | Yes |
CGPN can be supressed | Yes |
Reverse Media Negotiaton | Yes |
Long time call possible(>30 min) | Yes |
Voice Quality OK? | Yes |
Direct Dial In
Tested feature | Result |
---|---|
Inbound(QuesCom -> innovaphone) | Yes |
Outbound(innovaphone -> QuesCom) | Yes |
DTMF
DTMF via RFC2833 is supported and must be activated on the GSM GW. Tested from mobile phone via GSM GW to innovaphone pbx and vice versa.
Tested feature | Result |
---|---|
DTMF tones sent correctly | Yes |
DTMF tones received correctly | Yes |
Hold/Retrieve
Tested between mobile phone via QuesCom and innovaphone phones. Tested in both directions.
Tested feature | Result |
---|---|
Call can be put on hold | Yes |
Held end hears music on hold / announcement from PBX | Yes |
Held end hears music on hold | Yes |
Transfer with consultation
innovaphone phone transfers mobile call (via QuesCom ) and vice versa. Call returns works only when innovaphone phones transfers call (pbx feature).
Tested feature | Result |
---|---|
Call can be transferred | Yes |
Held end hears music on hold | Yes |
Call returns to transferring device if the third
Endpoint is not available |
Yes |
Transfer with consultation (alerting only)
innovaphone phone transfers mobile call (via QuesCom ) and vice versa. Call returns works only when innovaphone phones transfers call (pbx feature).
Tested feature | Result |
---|---|
Call can be transferred | Yes |
Held end hears music on hold or dialing tone | Yes |
Call returns to transferring device if the third
Endpoint is not available |
Yes |
Blind Transfer
Tested between mobile phone via QuesCom and innovaphone phones.
Tested feature | Result |
---|---|
Call can be transferred | Yes |
Held end hears dialing tone | Yes |
Broadcast Group & Waiting Queue
Calls from mobile phone (via QuesCom) to innovaphone pbx.
Tested feature | Result |
---|---|
Mobile phone can make a call to a Broadcast Group | Yes |
Mobile phone can make a call to a Waiting Queue | Yes |
Announcement if nobody picks up the call | Yes |
Minor Bugs
- Problem1