Reference9:Release Notes Firmware: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
m (Protected "Support:DVL-Roadmap Firmware V9": Security Reasons [edit=sysop:move=sysop])
No edit summary
Line 7: Line 7:
Please see ''[[Support:What is the DVL-Roadmap?|the disclaimer]]'' before using the information presented here!
Please see ''[[Support:What is the DVL-Roadmap?|the disclaimer]]'' before using the information presented here!


 
__NOEDITSECTION__
   
{{#invoke-url: http://wiki.innovaphone.com/extensions/InvokeUrlFunction/generateProjectList.php?area=maintenance&category=Firmware%20V9}}
= V9 Release  =
This is the Version 9 Release.  It is expected to be released 2011, Week 17.<!---->
[http://mantis.innovaphone.com/view.php?id=35995 Definition]
 
 
   
== V9 und V8 PPP port configuration geht nicht richtig auf ip6010 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63427 63427]
|}
Da erscheint in V9 bei Auswahl von PPPOE das ISDN Menu, dafr ist bei <none> jetzt kein weiterfhrendes Men sichtbar. Das sollte auch bei V8 so sein.<br/><br/>Bei V8 erscheint derzeit auch bei <none> das ISDN Menu, dafr ist bei V8 das PPPOE Men korrekt vorhanden wenn man PPPOE0/1 als Schnittstelle ausw„hlt.<br/>
   
== Fixed comparison of FTY_IM_MESSAGE in unit tests ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=126338 126338]
|}
In fty_event_im_message::is_identical fty_event_im_message::data was handled as a null terminated string but it is a bufman buffer.<br/><!--<br/>test_fty.cpp<br/>test_engine.cpp<br/>test.h<br/>-->
   
== SRTP: Better diagnostics for SRTP on IP6000 IP2000 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105043 105043]
|}
!mem info srtp_socket<br/><!--<br/>srtp_socket.h<br/>srtp_socket.cpp<br/>-->
   
= V9 Hotfix 3 (90600.03) =
Changes included in Version 9 hotfix3<!---->
[http://mantis.innovaphone.com/view.php?id=67520 Definition]
 
 
   
== IPxx10: error handling in sata driver ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67229 67229]
|}
Old cards are producing DMA errors that were not handled properly. Try again read/write operation after error recovery.
   
== DECT: IP6000/IP6010/... default config Master mode off ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67479 67479]
|}
Now the Dect Master is in mode off by default for the IP6000/IP6010/...
   
== SoftwarePhone: DTMF to voice mail ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67563 67563]
|}
Now, sending DTMF with myPBX is correctly working. This fixes sending DTMF to voice mail.
   
== VM: Trap while processing self-forwarded call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67570 67570]
|}
VM: Trap while processing self-forwarded call
   
== SIP: Uninitialized data in SDP offer/answer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67617 67617]
|}
Applies to G.726 exclusive calls only.
   
== Phone: Main menu scrolling below last item broken ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67618 67618]
|}
Phone: Main menu scrolling below last item broken.<br/>1st item hould be activated upon down arrow press (done) and screen focus moved up (not being done - bug).
   
== cpld update not working on ip241 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67629 67629]
|}
-
''Status:''
phone_orchid.cpp phone_orchid:config.h xilinx.cpp<br/>and as consequence also ip6010:config.h
   
== SIP: Interoperability with Lync and media-bypass ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67645 67645]
|}
Ack contained wrong To-Tag when calling a lync client in media-bypass scenario.<br/>Results into call drop after 30 seconds.
   
== Phone: Automatic key repeat did not work on IP222/IP232 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67661 67661]
|}
Automatic key repeat did not work on phone w/o alpha keyboard
   
== Call to Voicemail did not work anymore with SRTP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67672 67672]
|}
This was a collateral damage from fix<br/><br/>http://wiki.innovaphone.com/index.php?title=Support:DVL-Roadmap_Firmware_V9#Allow_configuration_of_SRTP_crypto_suite.2C_to_be_used_for_media_proposals
   
== Phone: long function key titles hide idle screen information ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67681 67681]
|}
Description: Phone: long function key titles hide idle screen information.<br/>Fixed: important idle screen information now shortens the amount of displayed function key name. Following information is now displayed over the function key text: a) crossed bell icon on do-not-disturb (lines 2+3) b) CFU + CFU-destination (lines 2+3) c) missed calls, unread messages and waiting callbacks (line 4)<br/><br/>
   
== PBX Waiting: Call forwarded with DTMF mapping was shown in myPBX for each registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67682 67682]
|}
The call was not sent with the original conferenceID, so myPBX could not detect that it was in fact the same call
   
== PBX: License accounting in centralized licensing scenario wrong if master not available ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67698 67698]
|}
When the master is available the slave stores the licenses from the master including the usage. This stored usage included the licenses used by the slave itself, so if after a reset the master was not available the local usage just added to this.<br/><br/>Now from the stored usage the local usage is subtracted.
   
== phone_orchid: microphone is not mute on a call intrusion in  silent monitoring mode / microphone cannot be muted in a conference ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67704 67704]
|}
On a call intrusion in silent monitoring mode the microphone of the intruding party must be mute. In a conference the micro should be muted when the micro key is pressed and unmuted when the micro key is pressed again.<br/>Muting the microphone did work when only one call was active but not when two calls were active as in a intrusion/conference.
   
== Phone: CLIR on text messaging did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67710 67710]
|}
CLIR on text messaging did not work
   
== SIP: Interoperability with Lync: Handling of REFER from Lync ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67713 67713]
|}
REFER for blind transfer was rejected with "406 Not Acceptable",<br/>due to absence of user part in refer-to URI.
   
== PBX Trunk: Problem with Forking to trunk if multiple GWs are registered to Trunk ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67720 67720]
|}
If one of the gateways rejected the call (no channel, not connected, ...), the original call from which was forked was disconnected
   
== Phone: Calls received with CLIR appear in call list with an empty entry ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67722 67722]
|}
Description: Phone: Calls received with CLIR appear in call list with an empty entry; now fixed to display the CLIR text: anonymous/unbekannt/...<br/><br/>
   
== PBX: License accounting did not work with Unknown Registrations under some special conditions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67731 67731]
|}
It could happen that a registration to a user was not accounted for if the endpoint used for this already had an unknown registration at the time the user was created
   
== User Interface: Alignment of tables fixed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67734 67734]
|}
Some strange alignments were introduced with the last hotfix
   
== Gateway: Interface Name with multiple "Umlaute" did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67737 67737]
|}
There was a length limitation of the URL encoded output, which was already exceeded if three "Umlaute" (or any character which is encoded in more the one byte with utf-8), were used
   
== IP-DECT: Packetization could change after handover ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67738 67738]
|}
On the new radio the RTP should be sent using the same packetization as was negotiated with the original call
   
== SIP: Fix for early media from Waitng Queue ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67775 67775]
|}
PROGRESS after ALERT was not handled by SIP stack.<br/>Now 183 Session Progress with SDP is send after 180 Ringing w/o SDP.
   
== Leak checking improved ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67783 67783]
|}
sometimes leaks were falsely detected. Problem if objects are about to be deleted, which were not owned by any module anymore. This happend esspecially with httpclient.
   
== SIP: Generate/add SRTP key on media-relay interfaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67789 67789]
|}
This enables even partial SRTP (SRTP on one side of media-relay).
   
== Phone: Enable "Activate Registration" without user/password authentication if "Protect Configuration at Phone" set ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67791 67791]
|}
Description: Phone: Enable "Activate Registration" without user/password authentication if "Protect Configuration at Phone" set. Activating a registration is a state change, and not a configuration modification, so allow this option.<br/><br/>
   
== H.323: A name_id of length 0 resulted in invalid H.450 coding ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67796 67796]
|}
An empty name identification received was forwarded in H.323 as invalid H.450. Such a name is now forwarded as 'name not available'.
   
== H.323 Malformed packet ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67803 67803]
|}
The ASN.1 encoder had a bug under one special condition: For a constrained character string with a maximum length of more or equal to 16bits, with an effective length of zero, the padding for octett alignment was missing for the zero length bitfield containing the string.<br/><br/>In H.323 this only happens for the CallIdentity used for H.450 call transfer message in case of blind transfer without consultation.<br/><br/>This fix breaks compatibility with earlier versions, for this reason this fix is available for version 9,8,7 and 6.<br/><br/>If phones and PBX with versions containing and not containing this fix are mixed  the following problems will occur:<br/>- A blind transfer without consultation (initiated with the redial key) is not possible<br/>- A call which was transfered without consultation is not displayed at the transfered-to phone as transfered<br/>
   
== SIP: Unwanted media-relay sessions when using forking/broadcast/multi-reg ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67819 67819]
|}
If in incoming SIP was routed to multiple destinations<br/>the final session could be media-relay although not configured.
   
== ip22/24/28/302/305: DSP affected by certain fax tones ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67821 67821]
|}
Brother fax problem, the first fax is transfered, the next fax transfers fail.<br/>Switch to fax from remote is now done without reopening the channel.<br/>Closing the channel waits until t38 is switched off.<br/>
''Status:''
ac_dsp3.cpp ac_dsp3.h
   
== IP30x, IP1060, IP2010, IP6010: Fax did not work if rerouted from ISDN interface to a Voip destination ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67823 67823]
|}
DSP was not configured correctly
   
== IP2x2: Handset microphone gain increased ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67843 67843]
|}
changed from 22.5db to 30db
''Status:''
ac_codec3.cpp
   
== IP241: Remote party information truncated more than necessary ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67872 67872]
|}
Line 3 of call ctrl
   
== IP-DECT: Changed channel option SRTP crypto suite ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67904 67904]
|}
Now DECT system channel configuration option 'Secure RTP' is a drop down box. The DECT Master correctly transmits the changed option. This feature was changed in V9 Hotfix 2, related case #66810.
   
== SIP: DNS problem when SRV response provides no additional records ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67907 67907]
|}
If 2-step resolving is required (SRV and A) the service port<br/>of the SRV response got lost and default SI Pport 5060 was used.
   
== SIP: Trap when configuring STUN server on a SIP/TCP or SIP/TLS interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67923 67923]
|}
STUN is for SIP/UDP only.
   
== myPBX: Always send an ID with CT_INITIATE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67932 67932]
|}
This is needed for interoperability with phones using v9hotfix2 or older. (See #67803)
   
== SIP: Must answer every request - even unknown/unsupported methods ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67935 67935]
|}
Lync sends proprietary NEGOTIATE request and waits for response.<br/>Otherwise transport connection is blocked for any upcoming request.
   
== PBX Waiting: A call rejected on a primary operator was never sent to all operators ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67945 67945]
|}
if again and again rejected on all primary operators. Problem happend also if rejected by "Do not disturb" on operator phone.
   
== PBX: Master/Slave compatibility problem with version 9 and version 8 and non-ascii characters in PBX name ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67956 67956]
|}
In version 8 only latin1 characters were allowed, which means in unicode the high byte was always 0. So it could be ignored and when sending location information between master and slave sometimes the high byte contained 0xff.<br/><br/>In version 9 this non-ascii location information was not correct unicode at all.<br/><br/>The problem happened only if non-ascii characters were used when naming a PBX.
   
== SIP: Generate new SRTP key on every incoming re-negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67958 67958]
|}
Required to have different encryption after transfer.
   
== PBX-CDR: Mobility calls to Trunk, external number was missing in CDR ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67978 67978]
|}
only the number of the trunk itself was available
   
== IP150: OEM specific WEB GUI modifications did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67992 67992]
|}
manufacturer specific stylesheets have to be be adjusted to the new GUI style 
   
== PBX: End of call intrusion was not signaled to the phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68007 68007]
|}
The call intrusion tone was generated even if the intrusion was terminated
   
== PBX: User Interface Inconsistency. Same thing was sometimes call 'Response Timeout'/' and 'No Response Time' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68008 68008]
|}
Only Response Timeout used anymore
   
== PBX-SOAP: Support UserClear for pending outgoing calls on Waiting Queues ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68009 68009]
|}
UserClear was ignored in this state
   
== SIP: Fix for media negotiation with SRTP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68067 68067]
|}
Exchange of SRTP key may fail after hold/retrieve
   
== phone_orchid: DTMF Tones detected in voice data from microphone were propagated to remote side ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68075 68075]
|}
DTMF tones may be detected from audible feedback on pressing a dial key in connected state and also from some other source. It's better to propagate only tones requested explicitely via a dial key and not from some external source.
   
== SIP: Trap handling 491 response on reliable transport ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68093 68093]
|}
Trap with MAX_BUSY_TICKS
   
== phone_inca:  "ETH0/Isolate PC Link" checkmark could not be cleared via WEB UI once set ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68098 68098]
|}
Only a WEB UI problem, a "config rem ETH0 /isolate-pc" did help.
   
== SIP: Trap when outgoing SIP call is cancelled while DNS resolving is ongoing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68099 68099]
|}
Trap when outgoing SIP is cancelled while DNS resolving is ongoing
   
== Gateway: Allow configuration of username and password for ENUM/SIP interfaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68147 68147]
|}
For rare where remote destination server asks for authentication.<br/>(And all remote destination servers ask for same auth or remote destination server s always the same.)
   
== SIP: Interoperability with LinkSys SPA3102 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68174 68174]
|}
LinkSys SPA3102 gives "g729a" as RTP payload type mapping:<br/><br/>    v=0<br/>    o=- 510843041 510843041 IN IP4 192.168.10.20<br/>    s=-<br/>    c=IN IP4 192.168.10.20<br/>    t=0 0<br/>    m=audio 16404 RTP/AVP 18 100 101<br/>    a=rtpmap:18 G729a/8000<br/>    a=fmtp:18 annexb=no<br/>    ...<br/><br/>Needs to be handled.
   
== IP241: Fix for display rendering ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68181 68181]
|}
Display of diversion destination was corrupt.<br/>Pickup fkey labeling was wrong when party information needed truncation.
   
== Gerneral/Admin page was broken if too many authentication servers were configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68231 68231]
|}
The number of authentication servers is now restricted to 10.
   
== SIP: Interoperability with Lync ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68232 68232]
|}
Media negotiation problem on calls coming from on Lync client<br/>and getting forwarded to another Lync client.<br/>
   
== IP241: Updated some display text information ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68234 68234]
|}
No need to strongly abbreviate disconnect cause text.
   
== Phone: Added loud note to web-ui that bool funnction key can only toggle if boolean object addressed by number ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68240 68240]
|}
Description: Phone: Added loud note to web-ui that bool funnction key can only toggle if boolean object addressed by number <br/><br/>
   
== phone: intrusion call started in handset mode is not terminated when going on hook when TAPI or operator run on PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68249 68249]
|}
With TAPI or operator running on the PBX the the signaling of a busy condition is changed such that a disconnect instead of a release is sent. The disconnect was not handled correctly, the hookswitch state was lost and the next on-hook signal was ignored. TThus teh call could be terminated with the disc-key only.<br/>
   
== Phone: Switch presence fkey light on if presence activity is set ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68256 68256]
|}
Switch presence fkey light on if presence activity is set
   
== myPBX: Wrong charset was used when authenticating against reporting or changing user password ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68258 68258]
|}
Javascript uses Unicode. The PBX and the reporting use UTF8. Therefore strings have to be converted to UTF8 before encrypting them using RC4.
   
== IP241: New fkey backgrounds ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68304 68304]
|}
Less transparency to avoid interference with personalized background images
   
== myPBX: Chunked response from application sharing provider did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68311 68311]
|}
After receiving HTTPCLIENT_RECV_RESULT, pbx_client did not send another HTTPCLIENT_RECV.
   
== phone_orchid: call pickup via partner/pickup key fails when the key is pressed immediately after audible signal ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68313 68313]
|}
When "Audible Signal after alerting" was configured on a partner/pickup key and the key was pressed while or a short time after the audible signal was played then the picked call was mute. 
''Status:''
files: ac_dsp3.cpp
   
== IP241: Activate external background image from phone menu ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68351 68351]
|}
External background image source can be configured on web ui.<br/>Background image can be selected on phone menu.<br/>Now also external background image can be selected.
   
== myPBX: Hide passwords for application sharing and reporting in config ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68352 68352]
|}
The passwords are moved from the config line to the VARS.<br/><br/>PBX0/MY-A - Application sharing password<br/>PBX0/MY-R - Reporting password
   
== SIP: Failed to register on dynamic PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68362 68362]
|}
Attempt to register on a dyn PBX with SIP protocol was rejected with "301 Moved Permanently".
   
== IP-DECT: Adding OEM radios to Kerberos realm did not work with passwords containing special characters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68377 68377]
|}
The password was not URL-decoded when reading it from the UI.
   
== SIP: Pending control calls on gateway ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68378 68378]
|}
Incoming unsolicited NOTIFY(message-summary) may cause pending control call on Gateway.<br/>Control calls are calls (signaling connections) without media channel.<br/>These calls are now released.
   
== WEB GUI page cannot be  scrolled completely when height of left hand logo is too big ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68382 68382]
|}
Height of FHF logo is bigger than that of the default logo, this must be considered when computing size for iframe below tab lines.
   
== DTMF user configuration with invalid checkbox check for presence setting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68383 68383]
|}
The check of the checkmark of the presence setting was wrong.
   
== IP222: Alpha input using the num block ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68398 68398]
|}
Automatic switching back to numeric mode when leaving input ctrl.
   
== SIP: Trap when using TLS as transport ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68410 68410]
|}
Only if remote side closes transport connection while requests are pending.
   
== phone_orchid: begin of voice mail prompt was cut off sometimes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68416 68416]
|}
Connection of Voip to DSP channel was delayed and thus the first packets of the RTP stream were lost.
   
== body onload attribute can be extended and tab_active method doesn't crash anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68430 68430]
|}
Custom PBX object XSL had no method anymore to set the onload attribute of the body. This can be now extended with a XSL template parameter.<br/>Additionally the tab_active method has been called by default and the default value caused the method to crash.
   
== X509: Fix for reading innovaphone info from flash ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68435 68435]
|}
Parsing the innovaphone info text was incorrect
   
== License: Be safe against factory reset during license invalidation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68447 68447]
|}
If factory reset is done before license invalidation procedure is complete,<br/>will keep you from completing the license invalidation.<br/>Now the procedure can be completed even after factory reset.
   
== IP241 - handsfree speaker volume to low ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68451 68451]
|}
The handsfree speaker volume was too low even when configured to maximum. Now the general output volume is increased by 3 dB. In case of problems the general output volume can be changed by<br/>    config add AC-DSP0 RINGER /VoiceOutputGain n<br/>with n = 1..63 -> (-32 + n)db, n = 32 -> 0dB, n = 0 -> mute
   
== wrong link to PPP Interface State Info Help ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68463 68463]
|}
Link out of V9 namespace
   
== phone: DHSG headset not reset to idle after a hookswitch signal in idle state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68567 68567]
|}
most DHSG headsets generate a hookswich signal and enter voice mode when taken out of basestation. This hookswitch signal was simply ignored.<br/>Now the voice mode is cleared after one second if there is no other DHSG event before.
   
== SIP/TCP: Transport error when connection is closed by client ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68578 68578]
|}
If transaction client closes connection before final response has been sent,<br/>the server tries to open a new connection toward ephemeral port of closed connection.
   
== SIP: Fix for Dialog-Info notification ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68581 68581]
|}
Send an empty dialig-info XML after inbound subscription.<br/>Required for interop with Grandstream GXP2010.
   
== SIP: Use secondary proxy address on interfaces without registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68635 68635]
|}
When secondary proxy address resolved by DNS it should be used to send INVITE to.
   
== SIP: Handling of 491 response on reliable transport ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68652 68652]
|}
Re-try of re-INVITE was missing.
   
== SIP: Treat domain part of SIP URI case-insensitive ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68653 68653]
|}
According to RFC3261(19.1.4)
   
== SIP: Fix for REFER handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68663 68663]
|}
Support for attended transfer between two calls from/to different SIP endpoints.<br/>As long as both calls belong to the same signaling interface.
   
== SIP: Problem decoding INFO(application/dtmf-relay) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68667 68667]
|}
DTMF digit was not decoded from message body if whitespace between EQUAL and DIGIT.<br/>E.g. Signal= 5
   
== Phone: Changing config option /sip-hold does not call for reset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68691 68691]
|}
Reset is required and 'reset required" must be displayed.
   
== SIP: Web UI for cause code mapping (fix) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68772 68772]
|}
Did not work as expected
   
== SIP: Out-Of-Memory trap if Group Indications are enabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68804 68804]
|}
If 'Group Indications' are enabled on a PBX object where a SIP client registers,<br/>an OOM trap may occur in case of heavy call activity on PBX.<br/>
   
== Phone: "Keep Calling Party Info on Pickup Key" option from Phone-&gt;Preferences not working, fixed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68820 68820]
|}
Phone: "Keep Calling Party Info on Pickup Key" option from Phone->Preferences not working, fixed
   
== Phone: DnD Absence Message containing newline dumped to config-file breaks phone upon config-file upload ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68898 68898]
|}
Solution: All flashdir entries cotaining newline now dumped as binary.<br/><br/>
   
== IP30x V9 hf2 media problem: Echo canceller not reliable ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68901 68901]
|}
Sometimes voice from ISDN/Analog to the IP is muted after some time.<br/>Seems to be a problem in the latetest echocanceller.<br/>Change to old DSP code until fixed DSP code is available.<br/>
''Status:''
ip24.mak
   
== Denial of Service filter in ethernet library did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68907 68907]
|}
this filter can be useful to prevent DOS attacks on non routing devices
   
== SIP: Trap when handling SUBSCRIBE on federation interfaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68976 68976]
|}
SIP client object may be deleted while DNS query is pending.<br/>But only under critical timing conditions.<br/>
   
== myPBX: Use display name for sending meeting urls and conference numbers ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68992 68992]
|}
For normal chat messages the DN is used as the sender name. For sending the links for application sharing or audio conferences the CN was used.
   
== Phone: Hide calling party on Pickup key fixed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68995 68995]
|}
Phone: Hide calling party on Pickup key fixed<br/>
   
== SoftwarePhone: No CT setup with remote connected calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68996 68996]
|}
The call transfer setup facility is removed in the call setup if the call is a by remote control connected call used in case of outgoing calls with myPBX. This fixes an empty diverting party number information element in the PBX. Now it can be used with a trunk PBX object with the enabled option 'Set Calling=Diverting No', otherwise the calling party number was removed within this object.
   
== PBX: Conference trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68998 68998]
|}
A zero pointer trap in the broadcast conference PBX object is fixed.
   
== IP222/IP232: Hookswitch on some PCB not working ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69001 69001]
|}
Reduce LED frequency from 12kHz to 6 kHz
''Status:''
orchid_lcd.cpp
   
== phone_orchid - builtin speaker test did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69026 69026]
|}
works only over channel 0
   
== myPBX: Login did not work with system names containing special characters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69033 69033]
|}
Missing URL encoding when sending the connect-request message.
   
== PBX Mobility: Mobility object hanging if call establishment with SOAP/myPBX canceled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69052 69052]
|}
If a call for a mobile phone is initiated by SOAP or myPBX, a call is first sent to the mobile phone. If the mobile phone accepts the outgoing call to the destination is initiated. If the mobile phone did not accept the initial call, no other calls could be done from then on.
   
== IP-DECT: Configuration of Media preferences did not work anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69056 69056]
|}
Media preference were ignored. This was a collateral damage introduced with fixes from the last hotfix
   
== SIP: Send OPTIONS at configurable interval ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67519 67519]
|}
For keep alive pruposes on interfaces without registration.<br/>Required for Lync interoperability.<br/>(config change TSIP /options-interval 30)
''Status:''
sip.cpp/h<br/>siptrans.cpp/h
   
== SIP: Fast re-routing on gateway interface w/o registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67593 67593]
|}
OPTIONS is used to check availability of remote peer.<br/>If OPTIONS fails, not trying to send INVITE.
   
== SIP: New config file option /no-ms-acceptedby ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67665 67665]
|}
Some IP phones get confused by this Microsoft extension.<br/>Cisco SPA 303 and Cisco SPA 962 don't stop ringing anymore
   
== ip200a/230/240:  handset conversations can be monitored in a directly connected  headset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67666 67666]
|}
This feature is required for a special application and is supported only for ip200a/230/240 phones with a directly connected headset (non DHSG).<br/>It is enabled via<br/>  config add INCA_DSP /handset-spy <volume><br/>whith <volume> in the range from 1..8 
   
== PBX: Translation of Cause "Call Rejected" to Cause "User Busy" for endpoint objects only ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67668 67668]
|}
If the cause is received from a gateway, it is forwarded transparently now
   
== myPBX: Show active sessions on the admin interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67708 67708]
|}
The active myPBX sessions are shown on the page PBX/myPBX.
   
== Phone: Added new function keys to Phone-UI (Toggle &amp;amp; Prepare Override) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67729 67729]
|}
Description: Phone: Added new function keys to Phone-UI (Toggle &amp; Prepare Override)<br/><br/>
   
== PBX: New presence activity "do not disturb" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67777 67777]
|}
If a users sets this presence activity no calls are passed.
   
== PBX: Allow CFB on Gateway Type Objects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67827 67827]
|}
A CFB is triggered by a User Busy. If a CFB is used for example at a Trunk, the CFB is executed when the called remote user returns busy. Because this may be unexpected the CFB was not executed at a Gateway Type Object.<br/><br/>It is now enabled again, because it is useful when connecting external systems which return busy to indicate an out of channels situation
   
== PBX Trunk/Gateway: Round robin within registrations to same device, different devices sequentially ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67835 67835]
|}
This way both round-robin or sequential usage of gateways can be configured
   
== improved test for Timeslot Switch Chip of ip6010 ip3010 ip0010 ip1060 and ip6000 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67840 67840]
|}
intension is better analysis of hardware problems
''Status:''
idt72_drv.cpp, idt72_drv.h
   
== ip22/24/28/302/305/6010/3010/1060/241/222/232: False DTMF detects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67844 67844]
|}
Seen on IP222 and IP6010
''Status:''
ac_dsp3.cpp
   
== phone_orchid: builtin color display test ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67845 67845]
|}
After the builtin test function has been started the display test mode is entered when the 'Esc' key is pressed. Numeric keys trigger a full screen test display, all other keys stop the display test mode.<br/>To the keys 0..9 the following patterns are assigned: <br/>DarkGray, White, Grey, Black, Red, Green, Blue, Yellow, Cyan, Magenta
   
== IP-DECT: Configuration XML data for OEM device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67858 67858]
|}
A new configuration XML attribute is added for changing a OEM GUI.
   
== Phone: "Function keys not modifiable on the phone" mask should disable creation of new function keys of masked type ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67905 67905]
|}
Description: Phone: "Function keys not modifiable on the phone" mask should disable creation of new function keys of masked type. Currently, only modification of preset function keys is disabled, but the creation of new ones enabled and possible.
   
== Phone: Added command line option to hide Administration Menu and/or MAC/Serial completely ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67943 67943]
|}
Description: Phone: Added command line option to hide Administration Menu and/or MAC/Serial completely. See /hide-mask option to PHONE ADMIN-UI in wiki for more information.<br/><br/>
   
== IP-DECT: OEM registration string ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68058 68058]
|}
The Radio registration string of an OEM device is changed to check a OEM license in the DECT Master.
   
== SIP: Diagnostics of transport error "Remote server certificate mismatch" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68142 68142]
|}
If remote sverer certificate does not match the destination domain name<br/>signaling connection is refused by client.<br/>
   
== myPBX: Support for WebEx meeting passwords ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68172 68172]
|}
In WebEx a meeting can have a password that must be entered by the attendees when they join. Some WebEx accounts can only create meetings with passwords.<br/><br/>The possibility to configure a global meeting password is added to the PBX/Config/myPBX page.
   
== Phone: Message function key ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68208 68208]
|}
Description: Phone: Message function key. Multifunctional depending on number of unread messages. Stores one prepared message (with destination and message text) and presents the new message screen when invoked. If incoming messages pending, display the letter/message icon and jump to incoming-messages subscreen upon invocation.
   
== phone: Finnish translations updated ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68395 68395]
|}
no english placeholders anymore, Texts begin with upper case letter
   
== IP150: dimming of key LEDs and LCD backlight ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68414 68414]
|}
to save power in special environments the key LEDs can be dimmed by<br/>  config add KEYS0 /light-off<br/>The lcd backlight can be configured the usual menu way on the phone. <br/><br/>
   
== HTTP-Client: Allow user names longer than 16 characters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68499 68499]
|}
Now user names with up to 64 characters are allowed.
   
== Phone: Call forwarding (always, busy, no reply) destination now choosable from dial-menu ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68504 68504]
|}
Phone: Call forwarding (always, busy, no reply) destination now choosable from dial-menu. Usage: enter number or search for phonebook entry, press menu-key, scroll down to choose call-forwarding (always, busy or no-reply) and acknowledge choice in CF-screen.<br/><br/>
   
== IP-DECT: Allow setting empty text for idle display ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68553 68553]
|}
Some handsets will not show signal strength and battery symbols if idle display is defined, they must be set to empty string.
   
== ac_dsp3: support echo canceller trace ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68649 68649]
|}
required to analyze echo canceller problems
   
== Phone: On IP240, make OK key a headset activation key (along with Space Key) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68774 68774]
|}
Phone: On IP240, make OK key a headset activation key (along with Space key).<br/>Enabled from Phone/Preferences : Use Newline/OK Key as Headset Key.
   
= V9 Hotfix 4 (90600.04) =
Changes included in Version 9 hotfix4<!---->
[http://mantis.innovaphone.com/view.php?id=69495 Definition]
 
 
   
== Kerberos: Protect against ping pong attacks ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68822 68822]
|}
Do not answer with an error message to unexpected or malformed messages.<br/><br/>This protects against the "Kerberos Server Spoofed Packet Amplification DoS" attack. The attack causes two Kerberos servers to send each other error messages in a ping pong style.
   
== RTP-DTMF: Start handling of RTP-DTMF on reception of END event ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68938 68938]
|}
Workaround for Bug in MS Lync / Mediation server.<br/>Mediation server changes destination port while sending RTP-DTMF redundancy retransmissions.
   
== SIP: Presence interoperability with ESTOS UC server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69050 69050]
|}
'Do Not Disturb' signaling without presence/tuple/contact element.
   
== SIP: Support for Mediation Server Cluster ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69051 69051]
|}
Load balancing and fail-over acc. to spec.
   
== Memory leak with each new telnet session ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69157 69157]
|}
Memory leak with each new telnet session (last packet upon exit not cleaned up)<br/><br/>
   
== SIP: Media negotiation problem ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69159 69159]
|}
On media-relay with exclusive codec we can answer an incoming SDP offer right away without passing to app.
   
== PPP connection fails after LCP renegotiation with different authentication methods (PAP -&gt; CHAP) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69167 69167]
|}
the active authentication entity was not stopped when another authentication was started and and signalled layer down after some timeout
   
== PBX Twinning: Blind transfer to other phone in a twin phone configuration was not possible ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69170 69170]
|}
Only normal call to other phone or consulation call was supported
   
== Web-UI: Fixed layout of DynPBX configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69197 69197]
|}
Use min-width for fieldset.left
   
== IPVA didn't run on vSphere5 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69232 69232]
|}
IPVA didn't run on vSphere5
   
== SIP: Interoperability of INFO(application/dtmf-relay) with Polycom ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69247 69247]
|}
Fail to decode DTMF signal, since "application/dtmf-relay" body does not contain any CRLF.<br/>While CRLF is required according to "SIP INFO Package for DTMF".<br/>
   
== IP222/IP232: residual echo  in handset mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69249 69249]
|}
Change Codec config
''Status:''
ac_codec3.cpp
   
== ip22/24/28/302/305: DSP affected by certain fax tones causing a trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69250 69250]
|}
Assert removed for testing<br/>
''Status:''
ac_dsp3.cpp
   
== PBX: Phone config was not sent to phone, if phone was power cycled shorty after registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69280 69280]
|}
The new registration after the power cycle was not detected as new registration but as re-transmission of the previous registration, so it was not reported to the PBX and no phone config was sent
   
== CX0-Wave-Encoding sometimes produced white noise ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69286 69286]
|}
CX0-Wave-Encoding sometimes produced white noise.<br/>Also a memory leak was eliminated.
   
== IP-DECT: Hanging call after call transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69309 69309]
|}
The hanging call in dectradio is fixed which occurred if a user does an unattended call transfer to an unassigned number and the transferred call is not disconnected.
   
== SRTP: Bad key exchange on H.323/SIP interworking ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69353 69353]
|}
MKI was added in SDP due to uninitialized data object.
   
== Pass DNS-TTL to SIP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69374 69374]
|}
In order to do load-balancing SIP needs to ge hold on the TTL of DNS resource records.
   
== SIP: Support of maddr parameter in redirect response for REGISTER ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69386 69386]
|}
Set when redirecting REGISTER.<br/>Read when processing redirect response.
   
== G726 codec obsolete ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69388 69388]
|}
The G726 codec was rarely used (if ever) in real life. In addition there are signaling problems specially with DECT peers when G726 is selected. Thus G726 is removed from the list of supported coders in all products.
   
== IP222: Input ip addresses does not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69393 69393]
|}
Entering an ip address on the phone's menu does not work.<br/>All digits are doubled.
   
== IP222: Call reroute did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69455 69455]
|}
Using redial key on in incoming not-connected call did not work.
   
== PBX: Call Diversion/Forward to '-' did not always show expected result ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69457 69457]
|}
A call diversion to a destination'-' can be used to explicitly no execute a diversion of this type. So if a user has an CFU to '-' and this diversion is valid for a given call (Filter, Boolean), the phone should ring.<br/><br/>In fact the call was rejected.<br/><br/>There was also a problem with CFB in case of "busy on ... calls"
   
== IP-DECT: New radio BMC firmware PCS05Ak ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69468 69468]
|}
The new radio BMC firmware PCS05Ak for the IP1200 fixes a trap by the DECT system if more than 255 DECT users without an endpoint subscription are sent to it.
   
== PBX: No CLIR on internal calls did not work for SOAP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69474 69474]
|}
If the features "No CLIR on internal Calls" is activated on a PBX a CLI is sent to the called phone even if the call was sent with "CLI presentation restricted". The same should be case on SOAP/TAPI when monitoring this user.<br/><br/>Now when "No CLIR on internal Calls" is enabled all number information available is provided on SOAP.
   
== PBX: Reject calls without media, if no known facility ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69477 69477]
|}
Fixes compatibility issues between versions. For example presence subscription sessions from v8 phones being forwarded to voicemail
   
== PBX Waiting: Not possible to send DTMF to Waiting Queue from myPBX Numeric Keyboard ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69482 69482]
|}
The Waiting Queue prohibited the facilities used for this to be sent to calling phone
   
== PBX: Filter for internal or external calls at CFs did not work CFB or CFNR if call already diverted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69483 69483]
|}
Problem:<br/><br/>User A has CFU to User B<br/>User B has CFNR for ext. Calls only to User C<br/><br/>An internal call to A was diverted to B (ok) and after no response diverted to C (nok)
   
== PBX Waiting: In case of "Announcemen w/o Connect" together with Alert-Timeout 0, DTMF dialing was not possible ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69496 69496]
|}
In this case as only response to the incoming SETUP a PROGRESS was sent. This meant, that the caller was still in overlap dialing state, so a phone does not send DTMF, but translates input keys to INFO dialing messages.<br/><br/>A CALL-PROC is now sent before PROGRESS, which terminates the dialing.
   
== SIP: Send BYE with Reason header with "Q.850 Recovery on timer expiry" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69500 69500]
|}
If session refresh is outstanding the call is released with BYE with "Reason: Q.850;cause=16".<br/>Better send BYE with "Reason: Q.850;cause=102"
   
== PBX Waiting: No ringback when doing two-stage dialing to a Gateway/Trunk object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69531 69531]
|}
A local ringback is now switched on, when receiving ALERT from called party
   
== SIP: Bug when decoding SRTP keys from SDP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69545 69545]
|}
Bug in decode base64.
   
== Web-UI: Input field to small for SIP-URI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69578 69578]
|}
Input control on "UC" tab of External UC properties dialog was too small.<br/>Only part of SIP-URI was visible.
   
== phone: assume an outbound call to be an external call if connected number info is missing in connect event ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69581 69581]
|}
In certain ISDN configurations the PBX can not provide the connected number info in the connect event for an outbound call. In this case the the call was assumed to be an internal call and consequently was not recorded when transparent recording of external calls was configured.<br/>Now an external call is assumed in this case.<br/> <br/>
   
== IP-DECT: Reset link ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69584 69584]
|}
The reset link of DECT System Config GUI page is fixed.
   
== SIP: Do not check remote certificate name when calling PBX client with TLS ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69598 69598]
|}
Check is reqired only when calling an unregistered client or when giving INVITE to registrar.
   
== phone: VLAN signaling priority could not be configured via phone menu ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69633 69633]
|}
Under "Menu/Administration/IP Settings/VLAN" there was only a "VLAN Priority" menu item. This menu item did override the 'Priority RTP Data' value but not the 'Priority Signaling' value as entered via WEB configuration.<br/>Now the items "Prio. RTP Data" and "Prio. Signaling" replace the "VLAN Priority" item.
   
== IPxx10-sata: trap after config /trace /track activation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69642 69642]
|}
Instruccion was accessing uninitialized pointer.
   
== IP222: Alpha input using the num block ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69646 69646]
|}
Input mode changes back to numeric in screen "Wahlvorbereitung".<br/>Should stay in alpha mode.
   
== IP200: Manufacturing test fails is hwbuild is reprogrammed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69662 69662]
|}
Old hwbuild was not cleared, because on INCA devices the hwbuild is located on a higher address was not cleared.
''Status:''
flash_firmware.cpp
   
== H.323: Media Negotiation problem with Lync interop and SRTP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69687 69687]
|}
With a retrieve from the lync after hold (which is signaled as a reinvite with sendrevc) new media parameters were sent, containing new SRTP keys. These new media parameters cannot be used, on the PBX which is initiating new end to end media negotiation at the same time. These media parameter were not ignored properly.
   
== phone_orchid: wrong volume setting when monitor mode is entered ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69734 69734]
|}
when monitor mode ise entered by pressing the speaker key in a handset conversation the handsfree speaker is enabled in addition to the handset speaker.<br/>the volume was reconfigured with the wrong value.
   
== phone_orchid: Calls received with CLIR appear in call list with an empty entry ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69737 69737]
|}
Calls received with CLIR or without a number/name appeared in call list with an empty entry; now either "anonymous" (CLIR) or "unknown" is displayed instead of a name<br/><br/>
   
== SIP: Take SDP id and version as 64bit integer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69738 69738]
|}
o-line of SDP offer/answer is defined as 64bit integer<br/>Interoperability with MX-ONE
   
== Relay: Forward facilities to local destinations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69764 69764]
|}
This fix is related to the previous fix #66629 for V9 hotfix2. Now, facilities are only forwarded, if the destination is a physical interface, not e.g. a SIP provider.
   
== SIP: Trap when handling NOTIFY(application/qsig) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69771 69771]
|}
Traps if no progress indicator present in tunneled DISCONNECT message.
   
== WEB-UI Config Upload screen blank after upload of a file with a lot of failing lines ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69812 69812]
|}
When uploading a file with about 50 failing lines the screen was left blank without any info about the failing operation.
   
== phone: "Keep Calling Party Info on Pickup Key" option from Phone-&gt;Preferences did not work with very long numbers/names ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69816 69816]
|}
speciall when using this option in conjunction with the "Display Name on Pickup/Partner Key" option the calling party info was not correctly displayed
   
== IP6010: SRTP using AES-192 and AES-256 did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69828 69828]
|}
Due to a bug in the encryption driver of the IP6010, only AES-128 worked on this platform.
   
== IP-DECT: Location update (OEM) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69863 69863]
|}
Location update with message waiting information is fixed if the endpoint roams. This is only used by OEM devices.
   
== Logging: Threshold for error event "SRTP authentication failed" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69920 69920]
|}
Error event was triggered at the very first decrypt failure.<br/>Some decrypt failure are expected during media re-negotiation.<br/>Trigger this error event after 10 decrypt failures in line.<br/>
   
== PBX Calls Page/SOAP wrong number ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69921 69921]
|}
In a configuration with escapes for calls from a slave and a node not the root node and the call forwarded to the master, because the number could not be resolved locally, wrong escapes were added to the called number
   
== phone ip222: MWI LED not working ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69924 69924]
|}
The MWI LED was not switched on for pending voice mails and/or pickups
   
== Trap during fax transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69950 69950]
|}
Seen on Ip28, can happen on AC_DSP3 ( IP22/24/28/302/305/1060/301/6010 )
''Status:''
ac_dsp3.h
   
== phone_orchid:  checkmark "Phone/User-x/General/Options/No DTMF Detection" has no effect ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70114 70114]
|}
If this checkmark is set DTMF digits entered via keyboard in a connected call shall be sent in-band as voice data, not encoded in RTP-DTMF packets as usual.<br/>
   
== Improved protection against Denial of Service attacks ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69166 69166]
|}
flooding a box with different kinds of packets may lead to out of memory conditions. The Denial of Service filter in the ethernet layer is activated where required. TCP listening sockets have a backlog limit now. The http service restricts the number of half-open sessions and limits the number of concurrent sessions according to the total memory available on a box.
   
== ISDN interop issue with SecuGATE LI 30 from Sirrix ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69168 69168]
|}
The SecuGATE LI30 is sending/receiving ISDN INFO messages in Call Proceeding State (State 3 and state 9), which was not supported
   
== PBX Mobility: Support of transfer on mobile side, not using mobility ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69275 69275]
|}
In case that the mobile phone transfers the call to another destination, this call must be removed from the mobility function, so that the mobility function is available for another call
   
== USB Driver merge from v10 to v9 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69288 69288]
|}
First step to support USB headsets. This is not functional yet.
   
== SIP: New config file option /hold-notify-as-inactive ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69293 69293]
|}
If set, holdNotific is interworked into "a=inactive".<br/>If not, holdNotific is interworked into "a=sendonly".
   
== SIP: New config file option /prefer-pai2 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69459 69459]
|}
Interoperability with Telepo:<br/>When receiving INVITE, get calling party id from second P-Asserted-Id header.
   
== new: DHCP manufacturer specific option 'boot-cfg' provides an URL to read config from after any reset except 'creset' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69472 69472]
|}
This option permits to boot boxes with a fresh config provided via TFTP/HTTP without storing the config on the device.<br/>It is intended to be used as follows:<br/><br/>1. the box is started with DHCP enabled (no initial configuration)<br/>2. the box contacts the DHCP server and gets the ip-address and also the Vendor Specific Information in option 43.<br/>  Suboption 249 of the Vendor Specific Information specifies the URL of the boot config file.<br/>3. the box polls the TFTP/HTTP server for the config file.<br/>4. the box reads the config file and executes the commands provided in the file<br/><br/>The URL may contain the same meta-character strings an Update Server URL, for example #m (mac-address)<br/>The length of the URL in the DCHCP suboption is restricted to 127 characters.<br/><br/>The URL is polled in 5 second intervals.<br/>The config file is read and executed by the update process in the usual way.<br/>A 'creset' commmand as last command of the file will restart the box with the new configuration without writing any 'config' command options to the flash.<br/>After a restart by the 'creset' commmand the boot-cfg URL is ignored.<br/>After a restart by any other of the 'reset' commands or by a power cycle the boot-cfg URL is processed again.<br/><br/>On an Innovaphone DHCP-Server configuration of a boot-cfg URL and providing it to clients via suboption 249 must be explicitely enabled by<br/>    config add DHCP0 /boot-cfg<br/>    config write<br/>    config activate<br/>Once enabled the URL may be entered under "IP4/ETH0/DHCP-Server/Boot Config URL" and is provided to all clients then.<br/><br/>If an Innovaphone DHCP-Client receivess a boot-cfg URL it is displayed under "IP4/ETH0/DHCP/Boot Config URL".<br/><br/>
   
== auto complete dtmf feature codes with '#' after 2 seconds ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69561 69561]
|}
Optional feature for phones, which are not able to send a '#', e.g. the iPhone.<br/>They dial a feature like a cfu with a destination number and after two seconds, the feature code is automatically completed with a '#'.
   
== PBX: HTTP request to initiate call for mobile phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69570 69570]
|}
To improve GSM client functionality
   
== PBX: WSDL for SOAP API readable from box ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69688 69688]
|}
Simplifies Application development in some environments
   
== SIP: Get display information from Call-Info header in register refresh response ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69758 69758]
|}
Get display information from Call-Info header in 200/OK
   
== IP-DECT: Display update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69770 69770]
|}
Now, the endpoint's display is updated if the registration forwards a display update.
   
== Voicemail &lt;pbx-query-obj&gt; queries new properties ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69781 69781]
|}
"user_type": returns "1"(endpoint) or "2"(other object like gateway)<br/><br/>"pseudo_type": returns types alike "vm", "bc_conf", "trunk"<br/><br/>"pseudo_text": returns friendly texts alike "Voicemail", "Bc Conference", "Trunk Line"<br/><br/>
   
= V9 Hotfix 5 (90600.05) =
Changes included in Version 9 hotfix5<!---->
[http://mantis.innovaphone.com/view.php?id=70208 Definition]
 
 
   
== SIP: Message decoding error ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70116 70116]
|}
Only concerns Message headers whose value starts and with quotes, but are not quoted.<br/>E.g.<br/>  Referred-By: "Huvudnummer"<sip:400@abcdef.ghi;fnrid=1759>;from-tag=5decdf1a;to-tag=2515833546;org-cid="6afa95ede909d311906f00013e11cdb3@192.168.2.115"<br/>
   
== Linux: VLAN GUI removed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70131 70131]
|}
It is not necessary to configure a VLAN to Linux. Now the GUI page Linux VLAN is removed.
   
== ip24/ ip6010/phone_orchid: in-band ring back tone generation into voice channel did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70146 70146]
|}
sometimes a ring back tone must be sent in-band to an ISDN channel. the tone was generated but passed to the wrong destination.
   
== SIP: Problems with CLEARMODE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70149 70149]
|}
CLEARMODE was not offered as prefered codec outgoing INVITE.<br/>Destination accepted G711a instead of CLEARMODE:<br/><br/>Offer:<br/>  v=0<br/>  o=- 18 1 IN IP4 172.16.66.77<br/>  s=-<br/>  c=IN IP4 172.16.66.77<br/>  t=0 0<br/>  m=audio 16422 RTP/AVP 4 18 8 0 96 97 101 13<br/>  a=rtpmap:96 G726-32/8000<br/>  a=rtpmap:97 CLEARMODE/8000<br/>  a=rtpmap:101 telephone-event/8000<br/>  a=fmtp:18 annexa=yes<br/>  a=fmtp:18 annexb=no<br/>  a=fmtp:101 0-15<br/>  a=ptime:20<br/><br/>Answer:<br/>  v=0<br/>  o=cp10 131833822144 131833822144 IN IP4 172.16.66.175<br/>  s=SIP Call<br/>  c=IN IP4 172.16.67.132<br/>  t=0 0<br/>  m=audio 33526 RTP/AVP 8 0 97<br/>  b=AS:75<br/>  a=rtpmap:8 PCMA/8000/1<br/>  a=rtpmap:0 PCMU/8000/1<br/>  a=rtpmap:97 CLEARMODE/8000/1<br/>  a=ptime:30<br/>
   
== IP-DECT: Master radio list sync highlighting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70150 70150]
|}
In the IP-DECT Master radio list the active sync highlighting is fixed, now.
   
== SIP: No update of name presentation after transfer on QSIG interworking ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70155 70155]
|}
Fix for QSIG/SIP interworking.<br/>Display name of callTransferComplete was not passed to SIP.
   
== IP222/IP232: Handset  volume with 90772 andHF4 too low ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70226 70226]
|}
This is a side effect of the echo canceller setting, volume in IP222/232 increased. IP241 uses old settings.
   
== SIP: Cannot use SIP phone with myPBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70252 70252]
|}
Blind transfer (sending REFER) did not work since v9hotfix3.
   
== SIP: Presence interoperability with ESTOS UC server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70257 70257]
|}
Another fix for "Do not disturb".
   
== IP241: Use menu-key to enter tftp mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70263 70263]
|}
tftp was activated with alt-key, on on IP240 menu-key is used
''Status:''
platform_orchid.c<br/>boot241.y
   
== IP222/IP232: Sporadic Problem with the LCD Display after soft-reset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70269 70269]
|}
It seem to be problematic to reset all orchid modules, e.g. the DMA module during software reset.<br/>Now only USB and ENET modules are reset, the display gets also reset.<br/>The display reset is released in the firmware.
''Status:''
start_orchid.S<br/>platform_orchid.c<br/>phone_orchid.cpp<br/>boot222.y<br/>boot232.y<br/>boot241.y
   
== IP241: Missing fkey icons ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70353 70353]
|}
Icons types list, face, mask-white and mask-black are available now.
   
== PBX: Conference trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70362 70362]
|}
Some reworks of the PBX conference object. Fixes traps with call transfers of conference calls and conference calls to other PBX objects or mobility. Object update is also possible without call and chat clearing, now. Set maximum call number takes effect for maximum incoming calls, now.
   
== IP241: Status icon for conditional call diversion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70363 70363]
|}
Now having 2 different status icons for diversion.<br/>One for unconditional and one for conditional forwarding.
   
== IP241: Moving focus on screen "Call Diversion" activates diversion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70377 70377]
|}
Using UP/DOWN/LEFT/RIGHT keys on the "Call Diversion" screen makes ON/OFF changing it state.
   
== Webmedia: Recording of G.722 did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70382 70382]
|}
Empty file was created.
   
== myPBX: Closing a chat window sometimes causes a Java Script error ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70439 70439]
|}
client.js, line 2033<br/><br/>The Problem is a collision of closing the window and incoming messages for that window.
   
== SIP: DNS resolving _stun._udp.xten.com did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70449 70449]
|}
Because of unusual DNS response.<br/>Target attribute of SRV answer records did not contain host domain name, but ip address.<br/><br/><result val="0" title="SUCCESS"><br/><br/><answer_rrs title="Answer Records"><br/><rr rr-type="33" rr-name="SRV" name="_stun._udp.xten.com" ttl="3407" priority="10" weight="0" port="3478" target="216.93.246.16"/><br/><rr rr-type="33" rr-name="SRV" name="_stun._udp.xten.com" ttl="3407" priority="10" weight="0" port="3478" target="216.93.246.14"/><br/></answer_rrs><br/><br/><ns_rrs title="Authoritative Nameserver Records"><br/></ns_rrs><br/><br/><ar_rrs title="Additional Records"><br/></ar_rrs><br/><br/></result><br/>
   
== H.323: Renegotiation to Fax did not work under some conditions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70462 70462]
|}
Problem happened<br/>- If switch to fax was done right after connect. This is typically done by IP Fax Servers<br/>- If multiple signaling hops (e.g. multiple PBXs) were used<br/>- If connect to a tone interface happened during dialing
   
== myPBX: Norwegian translation updated ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70477 70477]
|}
Sent => Send<br/>Logginn => P†logging <br/>Permanent logginn => Forbli p†logget
   
== ethernet broadcasts bearing unicast IP packets with an arbitrary destination address were passed to the local IP-stack ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70503 70503]
|}
some load-balancing implementations send unicast IP packets (specially TCP-SYN) as ethernet broadcast packets.<br/>Such packets must be silently discarded if the IP destination address is not the address of one of the local interfaces.<br/>
   
== IP222: Cannot leave menu screen with ESC when IP address ctrl was active ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70569 70569]
|}
ESC was taken as BS (backspace).<br/>ESC must be handled as ESC when BS is no longer possible (empty input).
   
== PBX: Presence update for PBX objects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70577 70577]
|}
Now the presence is updated in myPBX for other PBX objects if the access is changed to allowed.
   
== PBX: Conference presence info ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70581 70581]
|}
Now the broadcast conference object updates the presence info and is shown as callable in myPBX.
   
== myPBX launcher: Hotkey does not work with some applications ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70623 70623]
|}
Try to get the selected phone number using WM_COPY before sending CTRL-C. This should help in some of the cases where the hotkey didn't work before.
   
== SIP: Do not try to map local listen port with STUN when SIP/TCP is used ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70654 70654]
|}
Mapping of local listen port is only required fur SIP/UDP
   
== IP222: Use R-key as BACKSPACE on edit fields ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70664 70664]
|}
Not ESC-key.<br/>ESC-key is for leaving screen only.
   
== Trap: When Dectmaster registers user at PBX using SIP protocol ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70675 70675]
|}
After closing regstration Dectmaster starts another call.<br/>Call is rejected, but signaling enity is deleted before call object.
   
== IP-DECT: Hanging call after failed call transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70756 70756]
|}
The hanging call in dectradio is fixed which occurred if a user does an unattended call transfer and the call transfer fails.
   
== SIP: Allow STUN to be used to map local media ports on SIP/TCP interfaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70809 70809]
|}
STUN cannot map signaling TCP port, but UDP media ports.
''Status:''
medialib.h<br/>media.cpp<br/>h323ch.h/cpp<br/>sip.h/cpp<br/>siptrans.h/cpp<br/>
   
== IPVA, Keyboard Console, Credentials With Special Chars Couldn't Be Entered ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70873 70873]
|}
The Scancode table wasn't finished
   
== SIP: Reduce memory footprint of SIP stack ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70886 70886]
|}
Free INVITE request buffer when receiving ACK. No need to keep any longer.<br/>Delete INVITE client transaction when cancelling.
   
== SIP: No route processing if neither Record-Route header nor Contact header is present ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70971 70971]
|}
Misleading trace message:<br/>  sip_call::process_routing(0xA8) Unsupported transport protocol: sip:user@domain.com;user=phone
   
== IP6010: Wrong timer under high load ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71001 71001]
|}
-Clear IRQ in handle-interrupt after os_interrupt is too late, since IRQïs a enabled again and e.g. the timer irq is called again if a lower level IRQ like the enet occurs.<br/>-The IRQ needs to be cleared in the serial-irq handler, in all case. After the serial-irq other interrupts are enabled.<br/>
''Status:''
ip6010.cpp<br/>ip6010.h
   
== SIP: Media negotiation problem ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71009 71009]
|}
Internal re-negotiation during early media on incoming SIP call.<br/>Provide received offer to app again.
   
== SIP: Offer CLEARMODE only if bearer capabilities are "Unrestricted Digital Information" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71162 71162]
|}
On "Unrestricted Digital Information" only CLEARMODE is offered (no audio codecs).<br/>On other bearer capabilities no CLEARMOE is offered (only audio codecs).
   
== phone: dialog and presence subscriptions sometimes got lost after PBX restart when phone config was stored on PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71198 71198]
|}
This happened specially when both "Store Phone Config" and "Discard Config on Phone" was checked in the user object because of a unsubscribe/subscribe race condition.\t<br/>
   
== when editing a phone config template the dialing location inherited from a predecessor template was stored in the edited templat ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71246 71246]
|}
after a template has been edited unchanged information units inherited from predecessor templates must be removed from the edited template. this did not work for the dialing location and thus a later change in a predecessor template had no effect.
   
== SIP: Endpoints behind NAT could not register at public PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71266 71266]
|}
PBX must send response to the (public) IP address where request was received from.<br/>Not to the (private) IP address in Via header or Contact-URI.
   
== ipva, update to _platform_tracing.xsl ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71274 71274]
|}
ip6 missing
   
== SIP: No media after accepting a waiting call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71288 71288]
|}
Call waiting on a phone.<br/>Going onhock while another call is waiting starts ringer.<br/>After going offhook again the waiting call is accepted, but no media in both directions.
   
== CX0 Wave-Encoding Not Working If Fact-Chunk Present In Header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71290 71290]
|}
CX0 Wave-Encoding Not Working If Fact-Chunk Present In Header
   
== DHCP Server Identifier could not be cleared via WEB interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71305 71305]
|}
When the field 'Server Identifier' was cleared and OK was pressed the just cleared value reappeared but after a reset 'Server Identifier' was clear.
   
== IP241: Show ISDN display information in full length ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71330 71330]
|}
Use scrolling if required
   
== NAT: Mapping to different internal UDP port did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71339 71339]
|}
Configured destination port got lost after configuration
   
== phone: send config to PBX only when the config was edited on phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71387 71387]
|}
A config from an older PBX may contain duplicate elements which are stripped by the phone. I such a stripped config is sent back to the PBX the PBX will return the old config again.
   
== SIP: Send first NOTIFY(dialog) after sending 200/OK for SUBSCRIBE(dialog) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71413 71413]
|}
NOTIFY(dialog) was sent before 200/OK for SUBSCRIBE(dialog)<br/><br/>\tRequest: SUBSCRIBE sip:150@192.168.200.14<br/>\tStatus: 401 Unauthorized<br/>\tRequest: SUBSCRIBE sip:150@192.168.200.14<br/>\tStatus: 100 Trying<br/>\tRequest: NOTIFY sip:158@192.168.200.214:5060<br/>\tStatus: 200 OK<br/>\tStatus: 481 Subscription Does Not Exist<br/><br/>
   
== SIP: Interop with Nortel CS1000 SIPLine GW ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71426 71426]
|}
Nortel sends 183/Progress with 'sendrecv' answer<br/>followed by UPDATE with 'inactive' offer<br/>followed by UPDATE with 'sendrecv' offer.<br/><br/>Innovaphone SIP stack remains in 'inactive' state.
   
== H.323 Signaling Timeout event was generated for 'normal' RAS re-transmissions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71434 71434]
|}
A single retransmission is normal under heavy load, so this is no reason for an event. Signaling Timeout events are now generated only if they cause a state change.
   
== H.323 re-negotiation: Don't reuse media proposals if a select was already sent ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71435 71435]
|}
This fixes compatibility issues with SIP, especially when SRTP is used.
   
== IP241: Show both parties of each call on screen "Pickup List" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71455 71455]
|}
Currently only calling party infomation is displayed.
   
== phone: when a menu item was selected by the adjacent key sometimes the function assigned to this key was also executed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71469 71469]
|}
The function assigned to the menu item (for example pickup) was executed first and then the key-function (for example dial). 
   
== PBX: Wrong web page when submitting an object and an error happens ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71470 71470]
|}
If for example a dupicate number is detected, the same web page should be displayed including the error message for the duplicate number. But not the same page was displayed but a page which could contain information not related to the object.
   
== v8 to v9 upgrade problem with gateway registration names containing non-ASCII characters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71474 71474]
|}
In general this was a problem with config line arguments seperated by ':'. This happened with the <number>:<name> argument within gateway definitions. The ':' was url-encoded and <name> interpreted as <number>
   
== PBX: CFU was executed on PRESENCE_PUBLISH/SUBSCRIBE calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71479 71479]
|}
This was unexpected behaviour. You want to see the presence status of the configured user and not the presence status of the destination to which this user has configured a call forwarding
   
== SIP: Interoperability with MX-ONE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71480 71480]
|}
A semi-attended transfer fails if MX-ONE sends INVITE(Replaces)<br/>instead of 200/OK when connecting a call.
   
== Phone: Presence-Fkey did not always show presence set by myPBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71487 71487]
|}
Problem:<br/>1) Set presence A with IP phone (fkey shows A)<br/>2) Set presence B with myPBX (fkey shows B)<br/>3) Delete presence with IP phone (fkey shows no presence)<br/><br/>Now Fkey shows presence B.<br/>
   
== PBX: Tooltip on "PBX/Config/Log Calls" checkmark wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71507 71507]
|}
It read "If not checked PBX calls are logged", should be "If checked PBX calls are logged"
   
== IP241: Added flag to hide background-image configuration from phone menu ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71513 71513]
|}
See http://wiki.innovaphone.com/index.php?title=Reference9:Concept_Fine_grained_function_hiding#More_Information<br/>for more information
   
== Media: Discard RTP packets from wrong source ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71515 71515]
|}
Packets arriving at RTP port must be discarded if the source if not the expected one.<br/>To be save against DOS attack and for interop with Lync.<br/>In some scenarios Lync starts sending RTP packets while having the call set to 'inactive'.
   
== PBX: Blind transfer with consultation to BC-Conference failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71540 71540]
|}
The call was disconnected
   
== H.323: No Alarm/Event should be generated by shutting down registration due to reset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71545 71545]
|}
no event is sent to the application about this kind of unregistration
   
== phone-orchid: micro-speaker loop of embedded test did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71566 71566]
|}
Der Test war im Treiber nicht freigeschaltet
   
== myPBX: Send existing invitation links to users that join the chat session later ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71608 71608]
|}
Users A and B have a chat session.<br/><br/>1. A starts application sharing or audio conference<br/>-> A and B receive an invitation link<br/><br/>2. A adds a third user C to the chat and C accepts<br/>-> C should also receive the invitation link <br/><br/>This worked only for audio conference but not for application sharing.<br/>
   
== IP-DECT: Ring back tone after transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71610 71610]
|}
If in-band ring back tone is sent and the call is transferred to a new destination with no in-band ring back tone, a local ring back tone must be played to the DECT handset. This is fixed now.
   
== Ring Back tone missing after transfer when in-band tone was provided before but not after transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71612 71612]
|}
The initial local ring back tone must be restarted when no data is received after transfer.
   
== PBX: Send Name Identification with CLIR calls if "No CLIR on internal Calls" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71643 71643]
|}
The feature "No CLIR on internal Calls" did not work completetly. The number was sent, but the Name Id was still suppressed
   
== phone_orchid: Ring Back tone missing  when Silence Compression is enabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71670 71670]
|}
When Silence Compression was enabled the tone generation was not triggered
   
== IP232: Fix for touch handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71674 71674]
|}
Do not open touch keyboard on controls with CTRL_READONLY.<br/>Do not open touch keyboard on controls without CTRL_ACTIVATE.<br/>Using KEY_SHIFT has modified key to uppercase permanently.<br/>Cursor positioning on text controls did not work.<br/>Multi-line editor control was not displayed after hiding touch keyboard.<br/>Hide overlay keyboard after next touched key.<br/>Move and resize editor control when activating touch keyboard.
   
== SIP: Trap on timer expiration during call release ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71699 71699]
|}
Media negotiation watchdog timer expired after final SIG_REL went to app.<br/>But before app deleted the call object.
   
== phone: display info provided by SETUP or CONNECT was ignored ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71727 71727]
|}
only the display info provided by an INFO event was handled 
   
== phone_orchid: continuous dialing tone stops after 10 seconds and is not restarted anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71753 71753]
|}
the continuous dialing tone as used in most countries must be played as long as no digit is entered.
   
== IPVA, Reset didn't work on VMware Player 4.0 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71818 71818]
|}
IPVA, Reset didn't work on VMware Player 4.0
   
== IP241: Slow screen update when changing fkey type on fkey configuration screen ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71831 71831]
|}
Removing and adding config controls is very slow.
   
== ip6010 - calling &amp;amp; dtmf tone timing did not  work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71966 71966]
|}
the tone time was calculated much too short
   
== IP232: Redesign of touch keyboard ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71968 71968]
|}
Redesign of touch keyboard
   
== IPVA, Trap After Failed FW Upload ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71978 71978]
|}
If a firmware upload failed with "wrong checksum" the box trapped occasionally, leaving the boot disk in an inconsistent state.
   
== PBX Mobility: Potential Trap when initiating a call with myPBX or SOAP while another call is waiting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72637 72637]
|}
A waiting means a call which was received while another call was active and the active call being disconnected and the waiting call not yet sent, or a call waiting for recall.
   
== IP-DECT: Default frame size to 30ms ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70140 70140]
|}
Now the default frame size is 30ms.
   
== SIP: Support for transparent message headers on transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70163 70163]
|}
Interoperability with Telepo.<br/>
   
== added support for USB tracing with Wireshark ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70373 70373]
|}
USB traces are now supported by the debug class and can be opened with Wireshark and a new innovaphone.dll.
   
== SIP: Prefer P-Asserted-Identity with tel-URI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70417 70417]
|}
Prefer P-Asserted-Identity with tel-URI over that with sip-URI.<br/>In case there are two P-Asserted-Identity headers in INVITE.
   
== Gateway: Forward Display Info received from ISDN Setup to H.323 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70562 70562]
|}
needed for compatibility with SecuGATE LI30
   
== &lt;pbx-getcallinfo&gt; returning diversion reason ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70697 70697]
|}
as<br/><pbx-getcallinfo out-leg2-reason="..."/>
   
== myPBX: Interface for IM provider ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70867 70867]
|}
Interface between the JavaScript client and the myPBX launcher.
''Status:''
IM to JS:<br/>prepare_dial_name(value)<br/>prepare_im(value)<br/>ep_request(name,number)<br/><br/>JS to IM:<br/>innovaphone_updateXml(xml)<br/>innovaphone_sessionInfo(domain,name,number,cn,dn)
   
== SIP: Diagnostics of transport error "SIP Overload" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70883 70883]
|}
Limitation of buffer allocation
''Status:''
siptrans.cpp/h<br/>sipmsg.h
   
== IP-DECT: License restriction for OEM device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70887 70887]
|}
A license restriction for an OEM device is added. It is not used in the IP1200.
   
== SIP: Diagnostics of error "Registration expired" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70938 70938]
|}
Missing registration refresh
''Status:''
sip.cpp/h<br/>
   
== Possibility to clear the call list in mypbx ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71202 71202]
|}
A new button is now available in mypbx to clear the call list.
   
== phone: LED mode of Join Group function key can be set both for idle and for active state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71247 71247]
|}
sometimes the "not in group" state must be signaled as the exception
   
== myPBX: Show implicit visibility in groups ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71250 71250]
|}
Active members of groups can see the presence and the calls of other group members. In order to make that clear to the user, now the visibility settings of myPBX show in what groups the user is visible.
   
== IP-DECT: CSS changes for new OEM device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71282 71282]
|}
For a new OEM device with a changed style some CSS classes are added.
   
== PBX: New User property 'Do not Disturb' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71439 71439]
|}
No calls are sent to the user if set.<br/><br/>Can be set by 'External UC' applications (e.g. Estos Procall)
   
== PBX: Support up to six devices for a user ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71506 71506]
|}
Sometimes 4 devices are to little.<br/>A little bit of cleanup on the user interface was done as well with this change
   
== phone: Mic Off/On controllable via Soap:UserRc(&lt;call&gt;,14/15) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71721 71721]
|}
To allow Soap app's control of the mute key
   
== SoftwarePhone: New Tray Icon ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71969 71969]
|}
The SoftwarePhone has got a new tray icon differs from the myPbx one, now.
   
= V9 Hotfix 6 (90600.06) =
Changes included in Version 9 hotfix6<!---->
[http://mantis.innovaphone.com/view.php?id=71745 Definition]
 
 
   
== myPBX: Make more obvious that closing the chat window terminates the chat ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71893 71893]
|}
Display warning message when the user tries to close the chat window.<br/>Show disconnect icon instead of close icon in the window.
   
== IPVA, Optimize Flash-Related I/O Operations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71954 71954]
|}
Specifically to reduce boot-time. Utilizing 64KB I/O accesses where possible.
   
== H.323 RAS: Registration with authentication to account without authentication failed in a strange way ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71958 71958]
|}
Information was missing that no authentication was supported, so it was continued to retry instead of giving up right away
   
== TCP: Roundtrip measurement wrong in case of packet loss ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71985 71985]
|}
In case of packet loss, way to high round trip values were measured. If the packet-loss was to high, this could result in a constantly increasing re-transmission timeout value.
   
== SIP: Workaround for delays in media negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72189 72189]
|}
Workaround for delays in media negotiation caused by delayed Admission on H.323 calls.
   
== SIP: Trap on IP-DECT when re-configuring PBX link ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72190 72190]
|}
85:2195:425:7 - REG_PRI.4 default(8102be48): serial_timeout<br/>85:2195:425:7 - Assertion failed line 748 in common/os/os.cpp, object deleted<br/>
''Status:''
Merged to 09-80500
   
== IP232: Input of capital Latin Extended-A ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72226 72226]
|}
Input of capital Latin Extended-A
   
== myPBX: Queue chat messages for im calls that are not yet alerting  ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72237 72237]
|}
The following fix did not work across PBXes:<br/>#71608: myPBX: Send existing invitation links to users that join the chat session later <br/><br/>The problem was that messages were only queued in alerting state. When the call is made across PBXes this state isn't reached, yet.
   
== Scheduling improved to avoid processes not being scheduled during long flashman operations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72243 72243]
|}
In version 7 it could happen, that IP and other processes were not scheduled any more during periods of long flashman operations (e.g. bootcode update or reorganizing flash).<br/><br/>In version 8 and higher there was already a fix for this problem, but this included special handling of the flashman priority level, which was not a good solution even if it worked.
   
== IP232: Touch keyboard key highlighting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72268 72268]
|}
Added highlighting for key like SHIFT, BACKSPACE, etc.
   
== PBX: H.323 Names in some places (e.g. Waiting Queue Maps) containing non-ASCII charcters could break the user interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72277 72277]
|}
This happened esspecially for Names as destinations for Waiting Queue maps, but it could happen at other places as well.
   
== SIP: Cleanup failed (resources leaking) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72284 72284]
|}
Call and channel objects were not freed sometimes<br/>when INVITE was followed by CANCEL very fast.
   
== IP241: Disable Link LED not working ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72338 72338]
|}
Timing problem with access to the paged MDIO registers
''Status:''
orchid_drv.cpp
   
== Trap: When accessing web interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72362 72362]
|}
Seen once.<br/>Not reproducable yet.
   
== Ip6010 DSP Disconnect timeout after fax session ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72403 72403]
|}
Debugs added<br/>* enable with http://addr/debug.xml  DSP trace and DSP control message trace to printout  all packets to the DSP with a descriptive string. That allows to analyse the message flow to the DSP after a trap.<br/>* for further testing old fax disconnect procedure can be enabled with http://addr/AC-DSP0/mod_cmd.xml?xsl=dsp.xsl  with "t38 skip fax close".
''Status:''
ac_dsp3.cpp<br/>ac_dsp3.h<br/>ac_491.h<br/>dsp.xsl
   
== IP2x2: Fixed fkey handling of builtin test ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72442 72442]
|}
Fkey test did not work for touchkeys, key symbols were misplaced on screen
   
== myPBX: Improve presentation of chat conferences ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72444 72444]
|}
Chat conferences should not be displayed as multiple calls but as a single item in the main window.
   
== IP232: Parameters for touch sensor fixed for latest sensor ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72455 72455]
|}
latest touch was treated like the very old version that needed other parameters.<br/>Old touch is not supported any more ( only 3 were build)
''Status:''
edt_touch.cpp
   
== IP241,IP222,IP232: Make password configuration more convenient ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72456 72456]
|}
When entering a passwort on the phone's ui content is displayed as "****".<br/>Show last enered character in plain text.
   
== Ip6010 DSP Allow coder change from T38 to voice and back to T38 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72457 72457]
|}
..
''Status:''
ac_dsp3.cpp<br/>
   
== IP222: Take center key of 4-way-navigation control an OK key ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72477 72477]
|}
Center key should enter selected menu item.<br/>Not leaving the current menu screen.<br/>ESC key can be used to leave current menu screen.<br/>Phone app will ask whether to save changes.
   
== myPBX: Name and Number Display not correct on IM sessions across PBXs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72491 72491]
|}
for local sessions (same PBX) the number and the Long Name was displayed for the remote party and this should be the same for remote session.<br/><br/>Sometimes the number was missing, sometimes the Name was displayed instead of Long Name.<br/><br/>The number was not adjusted correctly if different Nodes were involved
   
== SoftwarePhone: Trap and media channel after conference ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72511 72511]
|}
If a call is disconnected during conference mode, the SoftwarePhone traps or there is no voice channel to the remaining party. This is fixed now.
   
== HTTP: Accept authentication with both Latin1 and UTF-8 coding ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72512 72512]
|}
The server does not know what encoding is used in Basic- or Digest-Authentication. Therefore both encodings shall be tried.
   
== ip28 codec hang when TEL port configured to '600Ohms' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72521 72521]
|}
this option experienced problems in the past and should therefore not be selected. If selected the firmware will switch to default CTR21.
   
== PBX: Cause for release/reject of a IM session not signaled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72533 72533]
|}
Better feedback to the User
   
== myPBX: New icons for unknown phone and im status ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72536 72536]
|}
The difference between open, closed and unknown was not understood well.
   
== SoftwarePhone: Dialing outbound calls temporarily failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72628 72628]
|}
When there was a held call and a consultation call and the consultation call was released by the remote peer the SoftwarePhone did not accept further outbound calls until the held call had been released. This is fixed now.
   
== IP232: Fix for touch keyboard handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72651 72651]
|}
When editing call diversions, one of the on/off controls may render across touch keyboard.<br/>Content of multi-line-edit-control was mis-placed when touch-keyboard was activated.<br/>Display of first matching directory entriy on indirect dialing screen.
   
== PBX Config Templates: When editing config Templates wrong inherited values are displayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72655 72655]
|}
A config Template inherits only from the 4 other Templates configured in it directly, whereas any other object inherits from the Config Template configured with it and the four other Templates this is refering to.<br/>
   
== ip241 - monitor mode (handset + speaker) did not work in V9hotfix5 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72702 72702]
|}
monitor mode (handset + speaker) was displayed but the speaker was mute
   
== update - scfg command could hang when the HTTP session was broken or prematurely closed by the server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72708 72708]
|}
in consequence update script processing was stopped until reboot
   
== Web-UI: Wider input fields for domain names ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72723 72723]
|}
When configuring<br/> - Remote Domain<br/> - Local Domain<br/> - Proxy<br/> - STUN Server<br/>on a Gateway interface there's need for more space.
   
== Trap: When Dectmaster registers user at PBX using SIP protocol ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72729 72729]
|}
When Dectmaster registers user at PBX using SIP protocol
   
== SIP: Add payload type for RTP-DTMF in case of media-relay ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72732 72732]
|}
Add payload type for RTP-DTMF (telephone-event) to SDP offer in case of media-relay.<br/>Should help on Mobility scenarios.
   
== PBX: Called Name displayed when calling an object with forking was wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72735 72735]
|}
The name of the forking destination was displayed instead of the name of the called object
   
== IP4001/IP6000 -UART driver did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72743 72743]
|}
the hardware requires the registers to be written 32-bit wise which was not respected by a fix one year before. 
   
== PBX: No Audio if call thru Waiting Queue DTMF destination, was transfered to BC-Conf ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72746 72746]
|}
Problem caused by call state management error in PBX for calls connected without alert if alert was received later
   
== IP241,IP222,IP232: Wrong call state displayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72748 72748]
|}
"Destination reached" displayed instead of "subscriber busy" if consultation call was rejected.<br/>
   
== PBX Waiting: Ringback missing when using DTMF to dial from one WQ to another which is alerting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72766 72766]
|}
This was a collateral damage for a fix for Waiting Queue announcements from a Boolean Object
   
== IP222,IP232: Long key press on numeric block while being offhook does not open directory search ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72831 72831]
|}
Long key press during offhook is expected to open directory search.
   
== IP232: New touch control in menu header for screen exit ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72833 72833]
|}
Re-design
   
== PBX: Profiles/Access got lost when writing an User Object with SOAP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72849 72849]
|}
The respective tags were not allowed
   
== IP241,IP222,IP232: Support for unicode 0x308 (diaeresis/umlaut) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72859 72859]
|}
When „,”, are encoded as a,o,u followed by diaeresis from unicode block 'Combining Diacritical Marks' only a,o,u where displayed.<br/>Now „,”, are displayed.
   
== IP241,IP222,IP232: Support for hebrew and arabic presence notes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72905 72905]
|}
Hebrew and arabic text passages are rendered frmo right to left.
   
== PBX: Conference no media ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72915 72915]
|}
There is sometimes no media for a conference member. This is fixed, now.
   
== SIP: Memory leak during transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73003 73003]
|}
Occured on internal testing only (002-conf-with-bcast.xml)
   
== IP241,IP222,IP232: Update for CFU indication on idle screen ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73013 73013]
|}
Not displaying "cfu:241" on header of idle screen<br/>but "Diverted to 241"<br/>or "Umgeleitet zu 241"<br/>or "Renvoy‚ sur 241"<br/>etc.
   
== myPBX: Simplify adding multiple users to a chat session ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73016 73016]
|}
Do not unselect the chat session, after a person has been added. Replace "start chat" buttons by "add to chat" buttons when a chat session is selected.
   
== RTP-DTMF: Digit may get lost during media re-negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73037 73037]
|}
Receiver starts handling on END event.<br/>Sender may stop sending before END event was sent.
   
== myPBX: Do not show bubble for outgoing chat calls and messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73039 73039]
|}
Notifications are only needed for incoming calls and messages.
   
== myPBX: Skript errors in chat window ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73040 73040]
|}
Closing the chat window caused different script errors in Internet Explorers and Firefox.
   
== LDAP replication from v7 could stop ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73052 73052]
|}
LDAP replication from v7 could stop
   
== SIP: Don't write SRTP key into T.38 part of media description ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73112 73112]
|}
v=0<br/>o=- 1295 1 IN IP4 10.120.55.3<br/>s=-<br/>c=IN IP4 10.120.55.6<br/>t=0 0<br/>m=audio 20026 RTP/SAVP 8 101 13<br/>a=rtpmap:101 telephone-event/8000<br/>a=fmtp:101 0-15<br/>a=ptime:20<br/>a=silenceSupp:off - - - -<br/>a=inactive<br/>a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:9xHxSg836505XOXwdIHfQ8Cm2ZYezNPpjvHNPCvb<br/>m=image 0 udptl t38<br/>a=T38FaxVersion:0<br/>a=T38MaxBitRate:9600<br/>a=T38FaxFillBitRemoval:0<br/>a=T38FaxTranscodingMMR:0<br/>a=T38FaxTranscodingJBIG:0<br/>a=T38FaxRateManagement:transferredTCF<br/>a=T38FaxUdpEC:t38UDPRedundancy<br/>a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:9xHxSg836505XOXwdIHfQ8Cm2ZYezNPpjvHNPCvb<br/>
   
== PBX External UC: Support of multisite setup ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73115 73115]
|}
This requires all calls to the External UC to be routed to one interface. Before this fix the calls were routed within the local PBX only.<br/><br/>Now a Name (not Long Name as before) has to be configured for the External UC interface.
   
== IP241,IP222,IP232: Show number of missed calls in status bar ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73140 73140]
|}
New extended symbol is more eye-catching.
   
== PBX: Called party number wrong at original called phone with forking ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73145 73145]
|}
If the forking destination and the original called phone are assigned to different nodes
   
== Media Negotiation: v9 XPARENT not compatible to v8 or earlier XPARENT ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73153 73153]
|}
In v9 a dynamic payload type is used for XPARENT to be compatible to SIP, whereas in v8 an earlier payload type 0 was used. Within the media negotiation this should be detected and switched back to payload type 0.
   
== Phones: Update of phone text data ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73211 73211]
|}
Some translations missing (Polski,Eesti).<br/>Support for language typical letters (Polski).<br/>Some abbreviation removed (for color phones).
   
== PBX: Conference GUI update with IE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73256 73256]
|}
The PBX broadcast conference object window is not closed if IE is used. This fixed now.
   
== SIP: support for "Content-Type: multipart/alternative" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73260 73260]
|}
Lync interoperability
   
== IP222/IP232: voice quality  in handset mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73263 73263]
|}
* Neuer DSP code von Audiocodes ( patch Version 660 02 mit AMR_WB ).<br/>* Kein StrongEC mehr n”tig<br/>* Codec PCM Bus l„uft mit 16KHz<br/>* Wideband Codecs zur Zeit disabled<br/>* Konferenz erfordert noch Anpassung im Treiber
''Status:''
ac_494e.cpp<br/>ac_codec3.cpp<br/>ac_codec3.h<br/>ac_dsp3.cpp<br/>ac_dsp3.h<br/>phone_orchid.mak<br/><br/><br/><br/>
   
== IP2x2: Keyboard handling on call reroute ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73268 73268]
|}
Redial key launches "Transfer" screen.<br/>After entering the destination number, Redial key should cause execution of call reroute.
   
== PBX Waiting: When using a waiting queue for outgoing dialing, the announcement was cut off at the beginning ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73274 73274]
|}
This was because the announcement was started already when the call was sent out and not when the call was connected
   
== myPBX: Allow spaces in last LDAP attribute ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73276 73276]
|}
Currently "j doe innovaphone" finds all internal users starting with j. It should only find internal users that start with "j doe innovaphone".<br/>
   
== IP222/IP232: hand receiver volume too high ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73306 73306]
|}
Die IP222/IP232 wird gelegentlich als zu laut empfunden.<br/>Die Prozentanzeige mit den krummen Balken sieht "komisch" aus.<br/>0% (Slider ganz links) w„re gut.<br/>Mehr Werte w„ren gut.
''Status:''
ac_codec3.cpp<br/>ac_codec3.h<br/><br/>
   
== IP232: Cursor positioning when touching ip address control ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73407 73407]
|}
Make sure input cursor is at right side of touched octet.
   
== SIP: Configuration of SIP response code mappings did not work on IPxx10 and IPVA ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73453 73453]
|}
http://wiki.innovaphone.com/index.php?title=Howto:Tweak_SIP_Response_Code_to_Q.931_Cause_Code_Mapping
   
== PBX: Reporting licenses counting could be wrong if config templates were used ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73466 73466]
|}
It could happen that a reporting license was used up by a config template object, if reporting was checked and other config templates where referenced
   
== myPBX: Allow overriding implicit allows ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73471 73471]
|}
It was not possible to define an allow with the same name. This is needed to override allows that are inherited from templates or group memberships.
   
== IP241,IP222,IP232: Trap when scrolling down long call list ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73494 73494]
|}
Out of memory trap when scrolling down long call list.
   
== Trap: When using Diagnostics/Ping ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73536 73536]
|}
When leaving Diagnostics/Ping or Diagnostics/Traceroute web screen a trap may occur.
   
== PBX: Navigating in locations and groups if non-ascii charaters were used, failed with internet explorer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73567 73567]
|}
Internet explorer buggy concerning url encoding of href attributes
   
== IPVA, crash-dump without backtrace, if  tracing was switched off internally ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73574 73574]
|}
IPVA, crash-dump without backtrace, if  tracing was switched off internally
   
== ISDN: Do not provide tones and no signaling of inband info for unrestricted digital information calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73603 73603]
|}
There is equipment, which is doing unrestricted digital information ISDN calls, which gets confused if there is an ALERT message indicating inband tones (ringback).
   
== IP241,IP222,IP232: Symbol "new messages" and symbol "headset" do overlap in status bar ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73608 73608]
|}
Moved "headset" symbol to right side of status bar.
   
== IP-DECT: DECT endpoint update for multicast identities ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73613 73613]
|}
The update information to DECT is changed if the user logs out a handset. This is used to update the multicast identities in some OEM handsets.
   
== Ip6010 DSP Allow calls to start with T.38 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73626 73626]
|}
Needed for some T38 fax applications
''Status:''
ac_dsp3.cpp
   
== IP241,IP222,IP232: Missing "Recall possible" display text on call completion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73628 73628]
|}
Missing display text on 'recall possible' notification.
   
== SIP: Media negotiation problem on outbound call from BC Conference object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73652 73652]
|}
INVITE was sent without SDP offer.<br/>test/9.00/pbx/conf/SIP/002-conf-with-bcast.xml
   
== IP241,IP222,IP232: Extra digits dialed when using RIGHT key on screnn 'indrect dialling' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73694 73694]
|}
'123123' instead of '123' was dialed.
   
== ISDN Trunk: Transfer to ISDN Trunk with TONE interface failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73695 73695]
|}
There was not media after the transfer
   
== H.323: Renegotiation to SRTP after dialtone failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73698 73698]
|}
Happens with Escape Dialtones configured in PBX and calls with SRTP enabled
   
== Option added to wait  for the DSP to disconnect fax, needed only for some fax devices. ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73748 73748]
|}
Use the prodedure of <br/>Mantis 67821: ip22/24/28/302/305: DSP affected by certain fax tones<br/>only if the option /t38-wait-fax-close set.<br/><br/>This avoids traps caused by disconnect timeouts if the DSP response is not received in time.<br/>
''Status:''
ac_dsp3.cpp<br/>ac_dsp3.h<br/>dsp.xsl
   
== SIP: Using wrong remote port when registering ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73784 73784]
|}
Only affects IP-DECT when handset is switched OFF and ON and if the SIP runs on non-standard port.
   
== IP232: Memory leak in display rendering ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73864 73864]
|}
Memory leak in display rendering
   
== IP232: Presence fkey shows current activity, but not current note ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71611 71611]
|}
Show current note in second line of fkey label.
   
== myPBX: Cause codes for instant messaging ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71878 71878]
|}
Display causes why a chat session has been terminated.<br/><br/>For example: Unassigned number, rejected, no response...
   
== myPBX: Make call state icons clickable ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71886 71886]
|}
Clicking a call state icon should have the same effect as clicking the text.
   
== myPBX: Notification on disconnected chat sessions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71918 71918]
|}
Display a text that the chat has been terminated.
   
== Debug information on assertion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71961 71961]
|}
More debug information on default event handler.
   
== myPBX: Display reason why a browser is not supported ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71972 71972]
|}
Currently it only says "Browser version not supported".<br/><br/>It should also tell what feature isn't supported:<br/>- XmlHttpRequest<br/>- WebStorage<br/>- PostMessage<br/>
   
== myPBX: Forward invitation links to incoming chat calls that are added to a chat conference ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72280 72280]
|}
The same way like the invitation links (for application sharing and audio conferences) are forwarded to additional outgoing chat calls.
   
== myPBX: Display invitation links in the chat window of the organizer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72282 72282]
|}
The organizer of an application sharing session or a audio conference wants to see all corresponding links in the chat window.
   
== SoftwarePhone: Password encryption tool ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72431 72431]
|}
A password encryption tool was added.
   
== SoftwarePhone: Crash dump ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72433 72433]
|}
Now, the SoftwarePhone writes a crash dump file.
   
== myPBX: Display shortened links in chat messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72445 72445]
|}
Shorten the displayed part of the URL in order to avoid text overflow.<br/>Cut overflowing texts at the right boundary of the chat box.
   
== PBX: New presence access flag 'online' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72538 72538]
|}
With this flag a user allows access to his online status
   
== myPBX: Configure visibility of online state and presence separately ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72632 72632]
|}
Phone status and IM status are now called online status.<br/>Activity and note are now called presence.<br/><br/>The visibility of both is now configured separately.
   
== PBX Mobility: Better support for Opticaller ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72701 72701]
|}
HTTP request to initiate call for mobile phone
   
== myPBX: New translations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72768 72768]
|}
For the other v9hotfix6 items regarding myPBX.
   
== Support for more automated Fax Tests ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72826 72826]
|}
Switching from Audio to Fax to Audio to Fax. Special case which could happen if switch to Fax happened before connect.
   
== myPBX: Highlight incoming alerting calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73093 73093]
|}
Highlight the alerting icon using an orange border.
   
== SIP: Interworking with KIRK Wireless Server 300 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73110 73110]
|}
If "KIRK Wireless Server 300 PCS10__ r3327"<br/>calls into PBX and is connected with Voicemail,<br/>Voicemail may send re-INVITE with SRTP key.<br/>Instead of accepting or ignoring the SRTP option,<br/>KIRK Wireless Server 300 rejects the whole SDP offer.<br/><br/>Now we retry the re-INVITE w/o offering SRTP key.
   
== PBX: Forward original received ISDN display element to picking up or forwarded call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73278 73278]
|}
In the display element from ISDN there could be vital information from equipment like crypto gateways. This should be available also if the call was picked or forwarded.
   
== SoftwarePhone: Support for Jabra SPEAK 410 USB with product id 0x0410 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73424 73424]
|}
Now, the SoftwarePhone supports Jabra SPEAK 410 USB with product id 0x0410.
   
== SIP: Overriding cause code mappings did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73477 73477]
|}
Mapping of SIP response codes into Q.931 cause codes could not be overwritten.
   
== Linux: Empty file check ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73554 73554]
|}
Now, an empty file is not accepted as a successful file upload.
   
= V9 Hotfix 7 (90600.08) =
Changes included in Version 9 hotfix7<!---->
[http://mantis.innovaphone.com/view.php?id=75932 Definition]
 
 
   
== Ip6010 DSP Allow coder change from T38 to voice and back to T38 with local DSP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73193 73193]
|}
..
''Status:''
ac_dsp3.cpp<br/>
   
== ISDN: Enable fax detection only after connect ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73213 73213]
|}
On ISDN networks it can happen that the Connect message is delayed. This way fax tones are forwarded to the caller before the caller has received this Connect.<br/><br/>This way a renegotiation on voip to fax could happen before the connect, which is not supported by sip.
   
== Phones: Update of phone text data ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73775 73775]
|}
External input
   
== SIP: Handling of collision of transfer and release ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73936 73936]
|}
If one end releases a call while the other initiates an attended transfer, a "ghost call" may remain.<br/>Resource leak.<br/>
   
== IP241,IP222,IP232: Limitation of background image size ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73957 73957]
|}
Limit is 512 kBytes now.<br/>To keep phone from out of memory trap.
   
== H.323: Renegotiation after PBX Node dialtone failed sometimes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74020 74020]
|}
This depended on timing. This happened if the call was sent after the dialtone to a master over a slow link.
   
== IP232: Open phone menu by touch gesture ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74046 74046]
|}
Touching header bar and moving vertically down opens the phone menu.<br/>No need to use center key of 4-way control.
   
== Dect User Gui: AD-replicated objects weren't listed under certain conditions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74051 74051]
|}
Deleted object thate were re-replicated werent't visible in the Dect user GUI. A mandatory Ldap attribute was missing under such circumstances.<br/>
   
== IP222: Handset Microphone level too low ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74073 74073]
|}
Handset micro increased by 6db<br/>Handsfree micro unchanged<br/>
''Status:''
ac_codec3.cpp<br/>
   
== IP222,IP232: Language configuration not saved ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74087 74087]
|}
Language can be selected on phone menu, but change is neither saved nor applied.
   
== SIP: Don't take NOTIFY(application/simple-message-summary) with "Do-Not-Disturb: no" as FTY_MWI_DEACTIVATE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74162 74162]
|}
Interop with Nortel CS1k PBX
   
== Phones: Fine grained function hiding did not disable Fkey configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74174 74174]
|}
Value 0x00000800 (PHONE_HIDE_US_FUNCTION_KEYS) hides function keys entry from user-list,<br/>but fkeys can still be (re)configured by long fkey press.<br/><br/>For more information see:<br/>http://wiki.innovaphone.com/index.php?title=Reference9:Phone/Protect<br/>
   
== myPBX: Allow asterisk as a wildcard in LDAP search strings ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74200 74200]
|}
As it is done on our phones.
   
== IP232: Pixel noise with some color values ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74221 74221]
|}
- changed to lower pixel clock
''Status:''
orchid_lcd.cpp
   
== PBX: Conference to VM ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74222 74222]
|}
Now a call to the VM as a conference member works again.
   
== RTP-DTMF: Digit may get lost during media re-negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74232 74232]
|}
Receiver starts handling on END event.<br/>Sender may stop sending before END event was sent.
   
== No media for calls from SIP provider forwarded back to SIP provider in case of NAT and MediaRelay ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74290 74290]
|}
NAT traversal depends on a packet being sent from inside the NAT to outside, to fix the RTP destination of the outside endpoint. This does not happen if both endpoints are outside.<br/><br/>Dummy packets are sent from the Media Relay function in this case to achieve this.
   
== ISDN: Send HLC with mobility calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74296 74296]
|}
Some ISDN networks refuse the forwarding of a call to a mobile network if no HLC (High Layer Compatibility) Information Element indicating Telephony is included in the call.
   
== IP241,IP222,IP232: Improved phone screen rendering ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74301 74301]
|}
Reduce map copy operations.
   
== SIP: Accept INVITE's from alternative proxy ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74310 74310]
|}
If alternative proxy is configured, calls should accepted from alternative proxy,<br/>even if primary proxy is alive and kicking.
   
== Flash Directory: Substring match could miss results ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74320 74320]
|}
Searching by substring worked case sensitive in some cases, instead of functioning case insensitive.
   
== PBX: CF at Gateway Type objects - additional dialed digits should be added to the destination ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74348 74348]
|}
This way a CFNR at a trunk object can be used to reroute the call to another trunk.
   
== Gateway: Deleting of routes could result in duplication of routes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74356 74356]
|}
This happened if an interface registration was disabled, for which automatic routes have been generated and then a route was deleted. The last route was duplicated.
   
== IP241/222/232: Monitormode (Lauth”ren): Level too low ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74362 74362]
|}
Use independent analog codec channels for speaker and headset receiver.<br/>Speaker volume in monitor mode is configured as in handsfree mode.<br/><br/>To change to speaker level in monitor mode the gain of the speaker can be configured with<br/> config change AC-DSP0 RINGER /DualOutputModeGain level<br/> config activate<br/><br/>level is from 0..63  0<br/>0 -> -32dm <br/>32 -> 0db<br/>63 -> 31db<br/><br/>
''Status:''
ac_codec3.cpp<br/>ac_codec3.h
   
== IP241,IP222,IP232: Could not activate first builtin background image from phone menu ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74367 74367]
|}
Could not activate first builtin background image from phone menu if external background image is currently active.
   
== IP241,IP222,IP232: Show multiple diversions on incoming calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74371 74371]
|}
If a call was diverted more than once, the phone shows first diverting party (original called number) and last diverting party.<br/>(Not only the last diverting party)
   
== myPBX launcher: Unhandled exception when accessing browser object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74380 74380]
|}
The myPBX launcher could crash when accessing the browser document because of an unhandled exception.
   
== IP232: Pickup fkey displays no information in active state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74392 74392]
|}
Pickup fkey displays no information in active state
   
== NAT: Permanent UDP forwarding did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74549 74549]
|}
Permanent UDP forwarding was unusable after first forwarded datagram.
   
== PBX Waiting: If used as outgoing dialing device, coder list sent with the call was not correct ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74593 74593]
|}
Should be based on the coders paramter in the configured URL
   
== Phone_orchid: Residual echo in handset ( sporadic) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74671 74671]
|}
Echo canceller NLP sensitivity Mode changed to  2
''Status:''
ac_dsp3.cpp
   
== IP222,IP232: Function key "Hotdesk" did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74723 74723]
|}
Function key "Hotdesk" did not work
   
== IP232: Fix for long touch on fkey ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74743 74743]
|}
Opens fkey config, but mist not toggle control on touch-off.
   
== Web-UI: Configuration of "Sync Server" does not return with HTML page ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74778 74778]
|}
Configuration of "Sync Server" does not return with HTML page
   
== IP222,IP232: changes not saved when leaving menu screen with LEFT key ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74792 74792]
|}
Even after confirming to save
   
== IPxx10: Flashdir Segments Default to 129(was 51) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74826 74826]
|}
IPxx10: Flashdir Segments Default to 129(was 51)
   
== Interop: Don't add an error log "SRTCP authentication failed" on non-RTCP packets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74903 74903]
|}
Microsoft Lync send invalid RTP and RTCP packets at the beginning of each call.<br/>In case of encrypted media, decryption of these packets fails.
   
== phone_orchid: ethernet statics counters sometimes displayed as negative numbers ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74913 74913]
|}
the unsigned counters were printed as signed integers
   
== IP241,IP222,IP232: Volume control not displayed when already at maximum ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74927 74927]
|}
Volume control is not displayed when trying to increase while being at maximum.
   
== IP6000 crypto driver: Trap when buffers are depleted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74935 74935]
|}
Avoid the trap and log an Event when the buffers are depleted.
   
== IP241,IP222,IP232: Mute status indication does not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74964 74964]
|}
"MICROPHONE OFF" is displayed on status bar now.
   
== SIP: Rare problem with blind transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74991 74991]
|}
callIdentity must be zero when giving ctInitiate to PBX on blind transfer.
   
== TLS: Flow control for incoming data ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75004 75004]
|}
The TLS socket has to wait for the application to process incoming data before sending the next RECV.
   
== H.323: Renegotiating to Fax was rejected, if PCM switch and local networks were used ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75006 75006]
|}
If the side which initiated a switch to T.38 has configured PCM and the media address was classified as local due to local network configuration, the T.38 was rejected.
   
== SIP: Interworking of divertingLegInformation1 improved ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75025 75025]
|}
Honour subscriptionOption
   
== IP222,IP232: Changes not saved in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75088 75088]
|}
Some config screens did not write changed settings directly after "Save Changes" dialog.<br/>If menu was left with DISC key (instead of ESC key) the changes have been discarded.<br/><br/>Also affects other phones: IP241,IP240,IP230,IP110<br/>Changes are saved immediately when leaving the current screen.<br/>Not when leaving "User Settings" or "Phone Setting" screen.
   
== PBX Waiting: Diverting leg1 info not correct when diverting to a Waiting Queue ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75091 75091]
|}
If Waiting queue not defined in root node and escapes are used
   
== PBX: Adjusting received leg1 info wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75097 75097]
|}
In context of nodes with escapes
   
== VM: &lt;pbx-upd-obj type="cfu"..&gt; without effect when invoked multiple times ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75121 75121]
|}
Statement <pbx-upd-obj type="cfu"..> failed to work properly after being used for diversion manipulation multiple times within a single script session.
   
== SIP: No interworking of "Q.931 CALL PROCEEDING" into "183 Session Progress" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75140 75140]
|}
Causes trouble on other vendor PBX's.<br/>(Aastra 5000, Advoco/Arcstel, Nortel SESM)
   
== IP28 Watchdog leads to endless interrupt and trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75186 75186]
|}
.
   
== IP800/6000: Problem mit FAX und CNG detect: Option to disable CNG detect added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75278 75278]
|}
<br/>config change AC-DSP0 /t38-cng-detect-disable 1 <br/>config write<br/>config activate<br/><br/>
''Status:''
ac_dsp3.cpp/h<br/>ac_fax3.cpp/h
   
== SIP: Decrement Max-Forwards and interwork to H.323 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75288 75288]
|}
Instead of sending always "Max-Forwards: 70"
   
== H.323: Renegotiation to T.38 did not work for slowstart call thru media-relay to efc endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75305 75305]
|}
A common scenario when this happend is an XCAPI (slowstart) calling thru a PBX with media-relay configured to an ISDN interface
   
== Fix for MIPS counter ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75310 75310]
|}
MIPS counter was incorrect
   
== PBX: Allow 'Max Calls' configuration of 0 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75362 75362]
|}
So that no call at all is sent to the object but a CFB (if configured) is executed
   
== SIP: Send "305 Use Proxy" if INVITE is received from unexpected source ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75380 75380]
|}
Applies to registered interfaces only (e.g. phones).
   
== TLS: Possible trap when restoring sessions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75394 75394]
|}
Only in v9, depending on the certificate.
   
== PBX Exec Object: Leg2 information send to secretary not adjusted correctly for nodes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75431 75431]
|}
The leg2 information is used to display at the secretary the number of the exec which was called. This number was not correct if nodes with escapes were used
   
== Gateway Interface Maps: Should be applied to leg1 info also ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75437 75437]
|}
The same rules used for a Calling Party Number are applied to leg1 info
   
== SoftwarePhone: Timer tick resolution ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75447 75447]
|}
The timer tick resolution is increased. This fixes the call RTCP calculation transmitted to the PBX.
   
== IP241,IP222,IP232: Indirect dialing of names not possible ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75451 75451]
|}
Could not dial a name from 'indirect dialing' screen<br/>by moving the focus to input field and going offhook.<br/>(Only fkey worked)
   
== PBX: CFNR Loop check detected loops that weren't ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75465 75465]
|}
Esspecially a CFNR at a Waiting Queue was not executed if the destination of the CFNR has transfered the call to the Waiting Queue
   
== Gateway: Event "No Media Data Received" was created for each SWITCH-PCM call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75483 75483]
|}
There should be no event in this case, this is normal.
   
== PBX: Conference id prefix/suffix configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75507 75507]
|}
The broadcast conference PBX configuration is changed: now, the third party conference unit option is saved and must be enabled to use the configured id prefix and suffix. Otherwise they are ignored now and default values for the innovaphone conference interface of the current device firmware version are used. This fixes the configuration if the firmware is updated from V8 to V9 and the innovaphone conference interface is used.<br/>Disabling the "Create Dynamic Conference Id" option in firmware V9 hotfix 5 and 6 is also fixed now.
   
== IP241,IP222,IP232: Call duration display wraps after 100 minutes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75508 75508]
|}
Now after 60 minutes the display changes from mode [mm:ss] to [hh:mm].
   
== TLS: Duplicate alert message on malformed ClientHelloV2 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75509 75509]
|}
Only one alert should be sent per session.
   
== TLS: Improved negotiation of protocol version ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75510 75510]
|}
TLS server unnecessarily rejected ClientHello messages with TLS 1.1 and higher. Instead of rejecting it should tell the client that it wants to use TLS 1.0.
   
== TLS: Skip empty records ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75511 75511]
|}
TLS record layer should ignore records with zero length without doing anything.
   
== myPBX: Script error after waking the PC up from hibernation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75532 75532]
|}
Sometimes window.open throws an unhandled exception in this case.
   
== SIP: Check proxy availability did not work in any scenario ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75542 75542]
|}
OPTIONS can be used to poll remote proxy's availablity<br/>to avoid TCP timeout when INVITE is to be sent.<br/>Signaling interface is marked as down and not used anymore.
   
== IP232: Hiding touch keyboard by touching a control ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75576 75576]
|}
Touching a text control activates the touch keyboard.<br/>Touching the text control again now deactivates the touch keyboard.
   
== IP241,IP222,IP232: CFU information in header bar ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75654 75654]
|}
CFU information in header bar is now displayed even if there's not is enough space between name and number.<br/>Either name or number is omitted is required.
   
== IP241,IP222,IP232: Replace triangle by arrow to display diversion/transfer information ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75689 75689]
|}
Replace quite heavy 'BLACK RIGHT-POINTING POINTER'<br/>by much lighter 'RIGHTWARDS ARROW'<br/>to display diversion/transfer information<br/>on call control, fkeys and call lists.
   
== H.323: A forwarded HopCount&gt;32 could result in a very small HopCount ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75765 75765]
|}
There are only 5 bits for transmitting a HopCount in H.323. A HopCount from SIP is typically 70 and this value was not reduced to 32 but only the 5 lower bits were transmitted, which resulted in a HopCount of 6
   
== IP: Minor memory management change ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75770 75770]
|}
no use of malloc in ipproc
   
== IP241,IP222,IP232: Two waiting calls are now displayed (instead of one) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75789 75789]
|}
Waiting calls are displayed below the two main calls.<br/>Only two lines of information and grey background.
   
== SIP: Handling of some more proprietary Alert-Info and Call-Info in INVITE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75824 75824]
|}
Alert-Info: <Bellcore-dr3>;info=alert-recall<br/>and<br/>Alert-Info: <http://not_used.com>;info=alert-autoanswer<br/>and<br/>Call-Info: <sip:127.0.0.1>;answer-after=0
   
== PBX Waiting: Leg2 information sent with calls to operators not adjusted correctly for nodes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75830 75830]
|}
If a Waiting Queue was configured in a Node not the root node, the leg2 info was not adjusted corrcectly. The leg2 information is used to signal to the operator which Waiting Queue is forwarding the call
   
== SIP: Decoding of RFC-4412 definitions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75848 75848]
|}
The 'Resource-Priority' Header Field<br/>The 'Accept-Resource-Priority' Header Field<br/>The 'resource-priority' Option Tag<br/>417 Unknown Resource-Priority response
   
== SIP: Handling of 422 Session Interval Too Small ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75873 75873]
|}
Get Min-SE and re-try INVITE
   
== SIP: Send b=TIAS attribute in media description ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75881 75881]
|}
Send b=TIAS attribute in media description
   
== remove indirect calls to os_mem_alloc() via malloc() ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75886 75886]
|}
malloc() shall not be used anymore in sources dedicated to run on innovaphone hardware
   
== IPv6: Memory leak if packets received, which are not handled locally ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75920 75920]
|}
E.g. an IPv6 multicast UDP packet, for some other application was not deleted.
   
== SIP: Fix for video negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75954 75954]
|}
Fix for video negotiation
   
== phone_orchid: after leaving a conference the active call was mute sometimes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75955 75955]
|}
The conference was not stopped internally in all cases.
   
== Flashman: Show meaningful result after OEM certificate upload in production ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75958 75958]
|}
"Certificate" instead of "-unknown-"
   
== SIP: Fix for Supported header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76016 76016]
|}
Re-implemented to easily add more tags
   
== IP222,IP232: Alpha mode did not work on multi-line edit controls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76165 76165]
|}
Could no enter alpha chars using the num block
   
== SIP: Trap when parsing very large History-Info header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76198 76198]
|}
Trap when parsing very large History-Info header
   
== SIP: SIP message may exceed available buffer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76203 76203]
|}
Trace message like this can occur:<br/>  ERROR: SIP message buffer (1025) exceeded! (9,14,801d781c)<br/>  SIP: CSeq missing<br/>  SIP: Message encoding failed!<br/>
   
== SIP: Contact not allowed in BYE/CANCEL/PRACK request ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76210 76210]
|}
Acc. to RFC-3261 there must not be Contact header line in BYE/CANCEL request<br/>Acc. to RFC-3262 there must not be Contact header line in PRACK request
   
== reset could fail, if issued during firmware update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76266 76266]
|}
and even worse any following reset command were not accepted as well
   
== IP241,IP222,IP232: Show "New message from ..." on active phone screen ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76283 76283]
|}
Show "New message from ..." on phone screen for 3 seconds when active with calls (non-idle).<br/>Like on b/w phones.
   
== IP241,IP222,IP232: Toggle of display-name/name-alias/number was buggy ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76290 76290]
|}
String termination was missing.<br/>Garbage data was displayed.
   
== IP232: Open call details when touching entry in call list ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76292 76292]
|}
Instead of initiating call to remote party in call list entry.
   
== H.323: Merges from v10 for Media Negotiation fixes and special OEM protocol features ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76301 76301]
|}
- Problem with transparent forwarding of SDP<br/>- special SRTP key exchange<br/>- Video fixes<br/>- Unit Testing support
   
== IP-DECT: Memory leak with rejected radio registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76308 76308]
|}
Memory leak occurred with a rejected radio registration is fixed, now.
   
== PBX-SOAP: When monitoring Waiting queue, the peer number was not indicated ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76315 76315]
|}
The number was considered presentation restricted, because of some bit manipulation error
   
== ip22/24/28/302/305/6010/3010/1060: Fax failed if tones are sent during the fax call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76342 76342]
|}
In some cases the Fax messages were missing due to tones send during the fxx call
''Status:''
ac_dsp3.cpp
   
== Gatway: Transfer handling may cause re-routing after regular hang-up ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76357 76357]
|}
Re-routing is expected to take place on non-connected calls only.
   
== PBX Number Map: Not possible to use overlap dialing to Number map with incomplete destination ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76377 76377]
|}
If a Number Object with incomplete destination was called and the number was to be completed with overlap dialing a wrong number was called.<br/><br/>This is a usefull feature to use Number Maps as quick dial to other nodes. In this case Number Maps are used with a destination of the remote node, so the number is incomplete, the number within this node has to be dialed in addition to the Number of the Number Map object.
   
== SIP: Support for media recording ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76396 76396]
|}
Media recording to HTTP URL
   
== Gateway: Conference interface, no voice ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76419 76419]
|}
The ADSP firmware is changed to version 122. This fixes a bug in the conference interface of IP6000/IP6010/... which results in conference calls without voice in one direction for a single member.
   
== phone_orchid: spurious trap in long conference calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76445 76445]
|}
in long confernce calls the phone may trap because the DSP delivers an unexpected zero size packet.
   
== IP241,IP222,IP232: Call held indication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76454 76454]
|}
If remote side has put the call on hold<br/>the user should get a visible indication<br/>(in addition to hearing music on hold).<br/><br/>New call status "held" is displayed.
   
== LDAP-Expert, Edit Object Dialog: Could show more than one object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76464 76464]
|}
LDAP-Expert, Edit Object Dialog: Could show more than one object
   
== Qsig: Connected Number could be encoded wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76472 76472]
|}
Qsig: Connected Number could be encoded wrong
   
== Gateway: Better handling of call-reroute requests ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76515 76515]
|}
Apply interface maps to numbers in reroute request
   
== PBX-SOAP: Better error handling when using a Waiting Queue for outgoing calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76544 76544]
|}
- call was hanging if an invalid number or user without registration was called<br/>- trap if outgoing call was done on operator connect
   
== Spurious leaks in leak checking ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76589 76589]
|}
A problem which mostly shows up in automated release testing and then requires manual investigation.
   
== SoftwarePhone: Auto start configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76595 76595]
|}
The duplicate back slash occurred with the install directory is fixed now. Used by the run mode configuration 'At login'.
   
== myPBX launcher: Window position was not always remembered ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76626 76626]
|}
When the user just moved the window without resizing it, the window position was not remembered for the next session.
   
== IP241,IP222,IP232: Some diagnostics to check phone's ui memory consumption ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74049 74049]
|}
Where have all the memory gone.
   
== SIP: Support for "Content-ID" in "multipart/alternative" bodies ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74161 74161]
|}
Support for "Content-ID" in "multipart/alternative" bodies
   
== IP241,IP222,IP232: Added drop shadow to lower end of menu screens ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74278 74278]
|}
To make end of list of menu entries more discernible.
   
== myPBX: Support static URLs for application sharing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74389 74389]
|}
In some application sharing solutions a fixed link can be used to create and join meetings (GoMeetNow, BeamYourScreen).<br/><br/>There are two URLs configured, one for the presenter and one for attendees. When the user clicks the aplication sharing button the links are sent using chat messages.<br/>
   
== PBX: Tracing flag turns on tracing in all dyn PBX's as well ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74390 74390]
|}
Helpfull to debug dyn PBX setups
   
== debug method raw_ethernet ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74897 74897]
|}
A new debug method to trace raw ethernet data.
   
== Support for new hardware ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74990 74990]
|}
.
   
== possible use of push-pull drivers for new hardware ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75051 75051]
|}
not visible to customers
   
== PBX/IP-DECT: User password length ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75453 75453]
|}
The maximum user password length in the PBX and IP-DECT is increased to 23.
   
== H.323: Support for switch back to local media on endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75522 75522]
|}
needed to resume normal call after a conference using external conference unit
   
== IP232: Touch gesture to open directory-search/indirect-dialing screen ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75549 75549]
|}
Vertical upwards on idle screen opens directory-search/indirect-dialing screen.<br/>Vertical downwards on idle screen opens main-menu screen.
   
== PBX-SOAP: Wsdl Versioning mechanism fixed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75552 75552]
|}
Better mechanism, to avoid constantly adding arguments to the Version function with new Versions.
   
== different port naming convention for new hardware ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75575 75575]
|}
BRI1..5 instead of TEL1..4+PPP
   
== PBX-SOAP: UserHold without MOH to local User ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75577 75577]
|}
UserHold was sending MOH to the local and the remote User. With the argument remote=true, the MOH is sent to the remote user only
   
== myPBX launcher: Use default configuration from local machine registry hive ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75634 75634]
|}
If no user configuration is given, the following values are copied from the local machine hive.<br/><br/>"Software\\innovaphone\\myPBX\\URL"<br/>"Software\\innovaphone\\myPBX\\secondaryURL"<br/><br/>Also the autostart checkmark is disabled, if autostart is activated, globally. Autostart is controlled with the following registry key.<br/><br/>"Software\\Microsoft\\Windows\\CurrentVersion\\Run\\innovaphone myPBX"
   
== SIP: support for proprietary message header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75864 75864]
|}
Support for proprietary message header (CAL)
   
== H.323: Call to SIP Trunk with MediaRelay and exclusive coder renegotiation from TONE to early media did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75959 75959]
|}
No ringback and no audio after connect
   
== SIP: Added Call-Info header to re-INVITE for hold/retrieve ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76011 76011]
|}
Call-Info: <urn:X-cisco-remotecc:hold><br/>Call-Info: <urn:X-cisco-remotecc:resume>
   
== SIP: Support for active call pickup acc. to RFC-3891 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76035 76035]
|}
Sending INVITE with Replaces header to do pickup at SIP PBX's
   
== phone ip222, ip232 : USB headset support (beta) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76463 76463]
|}
general support for USB headsets added, some headsets are tested and working, others will follow soon
   
== phone - Headset Function Key can be configured now as enable/disable or as call control key ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76468 76468]
|}
a headset key mode can be configured to use the key either to enable/disable the headset (Mode: Enable) or to start/accept/clear calls via headset (Mode: Control)
   
= V9 Hotfix 9 (90600.11, withdrawn) =
Changes included in Version 9 hotfix9<!---->
[http://mantis.innovaphone.com/view.php?id=76991 Definition]
 
 
   
== add  programmable tftp retry  limit to httpclient ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74936 74936]
|}
currently there is a fixed retry limit of 4. some OEMs want to set this dependent on expected file size.
''Status:''
checked in to 10.00, 9.00, 90600
   
== H.323: Media Negotiation problem with conferences on IP-DECT ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76314 76314]
|}
A channel was not switched to the conference after a hold/retrieve cycle
   
== PBX Mobility: Dialed digits could get lost, when using Opticaller ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76598 76598]
|}
There could be a collision of a dialed digit with media renegotiation. For example if with the first digit a media was switched to inband information from a carrier.
   
== phone: Ring Tone Titles containing apostrophes  garble phone configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76745 76745]
|}
When under "Phone/Ring Tones/Add Ring Tone" a title containing apostrophes is entered the page "Phone/User-x/Preferences" cannot be edited anymore because of a XML-Error.
''Status:''
checked in to 10.00, 9.00, 90600
   
== SIP: Record-Route handling on outbound subscriptions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76831 76831]
|}
Processing of Record-Route in SUBSCRIBE response.<br/>Simply missing.
   
== IP241: Headset noise during firmware update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77111 77111]
|}
.
''Status:''
phone_orchid.cpp
   
== phone: Pickup fuction key is not displayed while all alerting calls are displayed on a Partner key ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77393 77393]
|}
alerting calls displayed on a Partner key are not displayed on the Pickup key.<br/>if nothing has to be displayed on the pickup key the key should not disappear but display the 'idle' label
''Status:''
checked in to 10.00, 9.00, 90600
   
== H.323: Media Negotiation problem with transfer in Gateway (not PBX) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77683 77683]
|}
Under special conditions a blind transfer happend in the Gateway could result in a call without media. This only happened if the call was transfered twice and the destination of the first transfer was a physical interface.
   
== PBX Twinning: When calling another (twin) phone, the call was sent to the original phone also ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77829 77829]
|}
It still works, but this waiting call could be confusing
   
== PBX: Routing problem with nodes/escapes/slaves with calls to object in same node but different PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77874 77874]
|}
A call from a object within a node with escapes on a slave PBX was not routed to the master if the destination was within the same node and not known on this slave but was sent to the node-extern destination directly
   
== PBX Waiting: Name Id missing in calls initiated with SOAP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77911 77911]
|}
When a Waiting Queue is used by applications to initiate outgoing calls, the name of the waiting queue should be sent with these calls as calling name. This name id was missing
   
== RTP: Potential random trap when closing channels ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77918 77918]
|}
Happens if there is a collision with a received packet and closing of the channel. Window for this is very small, so it should happen very rarely. Probability can increase with high load.
   
== Web-UI: Visually separated commands ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77954 77954]
|}
Visually separated commands 'Clear' and 'Save' on Maintenance/diagnostics/Events.<br/>Also 'download' and 'delete' on General/License.
   
== IP241,IP222,IP232: Show special symbol for call completion entries in call list ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77966 77966]
|}
Show special symbol for call completion entries in call list to separate from usual missed calls.
   
== IP241,IP222,IP232: Status message "Recording" not displayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77992 77992]
|}
Status message "Recording" needs to be displayed during recording.
   
== Gateway: Wrong Media info sent for calls forwarded from a VOIP interface to another VOIP interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78024 78024]
|}
This could cause wrong information to be displayed on a PBX calls page. Esspecially SRTP was not indicated.<br/><br/>Better to not send any Media Info in this case.
   
== IP241,IP222,IP232: Wrong display name in call list ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78047 78047]
|}
Name identification of remote party is to be displayed,<br/>but name identification of diverting party was displayed instead<br/>on incoming calls list.
   
== phone:  the call which was the active call at start of a conference was not  automatically cleared  on a release from remote ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78086 78086]
|}
The call which was the active call at start of a conference had to be cleared manually but the call which was on hold at start of conference was cleared automatically.<br/>Now any call will be automatically cleared when relesed from remote.
''Status:''
checked in to 10.00, 9.00, 90600
   
== phone_orchid: remaining call mute after remote relase for the call which was the active call at start of a conference ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78091 78091]
|}
did not happen after a remote release for the call which was on hold at start of the conference.
''Status:''
checked in to 10.00, 9.00
   
== IP1060 IP3010 IP6000 IP6010: T1 mode: wrong pulseshape for short lines. ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78157 78157]
|}
Slew rate and level for T1 pulse for short lines was too high
''Status:''
falc56_drv.cpp<br/>falc56_drv.xsl
   
== permit hid usage report sizes of up to 64 byte, some devices send  more than 32 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78158 78158]
|}
Jabra LINK 14201-30 responds with 33 byte to certain requests
   
== phone: ip222,ip232: Muting USB headset micro via microphone key did not work but MICROPHONE OFF was displayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78159 78159]
|}
.
''Status:''
checked in to 10.00, 9.00, 90600
   
== IP241,IP222,IP232: Trap in font rendering ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78210 78210]
|}
Some characters at beginning of line may cause trap.
   
== Gateway: Trap when interworking Call Completion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78228 78228]
|}
Trap when interworking Call Completion.<br/><br/>LOG CALL 6 A:Call    ->                        / PRI2::->*::<br/>R_CALL free error c18a59b8<br/>
   
== phone: ip241: memory leak when ip230x extension module is attached and used  ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78311 78311]
|}
one packet lost per keystroke on extension module
   
== PBX: Dynamic group function keys did not work with non-ascii characters in group name ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78322 78322]
|}
Name was not correctly converted to internal utf-8 representation
   
== phone: ip222,ip232: trace USB media data only if explicitely requested ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78326 78326]
|}
use "config add USB-HOST AUDIO /trace" if data is needed
   
== H.323: Potential Trap in case of special malformed RAS registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78368 78368]
|}
A NULL pointer access could happen
   
== PBX MWI Object: Malformed H.450 interrogation result was sent if no message ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78376 78376]
|}
It still worked, because the wrong message was usually interpreted as no message available, which was correct, but it does not look nice in wireshark
   
== SIP: Removed b=TIAS attribute from media description ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78379 78379]
|}
Causes trouble on some SIP providers (neotel.at)
   
== DHCP server leases with hostnames containing non-ascii latin1 characters (for example Umlauts) could not be displayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78382 78382]
|}
In pre-V9 firmware hostnames were stored latin1-encoded. Names contaning non-ascii latin1 charaters must be converted to UTF8 before display.
''Status:''
checked in to 10.00, 9.00, 90600
   
== MyPBX: Changing password did not work any more ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78391 78391]
|}
Collateral damage of fix #75453: PBX/IP-DECT: User password length
   
== phone: ip222, ip232: USB headset sometimes mute after disconnect ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78414 78414]
|}
depending on isochronous transfer state at disconnect time. seems to happen more often with relatively cheap headsets.
   
== SIP: Be save against sudden death of SIP caller ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78460 78460]
|}
Lifetime of an INVITE trasnaction is not limited by any timeout<br/>after provisional response has been send/received.<br/>Sudden death of a caller make calls hang forever.<br/>Now overall lifetime of an INVITE server transaction is limited to 3 minutes.<br/>After expiration fimnal reject response is sent and call is released.
   
== IP1060 IP3010 IP6000 IP6010 IP22 IP24 IP28 IP302 IP305: Fax failure after transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78487 78487]
|}
channel was reconfigured on remote switch to T38, without a new activate fax relay command
''Status:''
ac_dsp3.cpp
   
== PBX Boolean: Avoid unnecessary load by boolean monitoring ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78504 78504]
|}
A call was sent to the monitoring endpoint every 10s
   
== IP241,IP222,IP232: No RTP send on outgoing call in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78550 78550]
|}
No RTP send on outgoing call in some cases
   
== IP6000: Traps in DSP driver under high load ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78591 78591]
|}
under high load timing may change. Checks in driver relaxed to take this into account.
   
== PBX-SOAP: Limit on size for Admin call too small ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78592 78592]
|}
Only 4k was allowed
   
== SoftwarePhone: Default ToS value for RTP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78593 78593]
|}
Now the default ToS value for RTP packets is 0xB8.
   
== PBX Filter: Maximum length increased from 13 to 17 digits ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78594 78594]
|}
13 digits could be too little if an international number including a prefix of an external line was to be checked
   
== IP241,IP222,IP232: Wrong call direction indication on PARTNER fkey ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78642 78642]
|}
When partner calls someone else it my displayed as if partner is called.<br/>(Only if option "Show connected Party in busy State" is enabled)<br/>
   
== IP222 IP232 IP241: Sporadic noisy sidetone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78649 78649]
|}
Analog and digital sidetonegain were enabled,now only the analog sidetonegain is used.
''Status:''
ac_codec3.cpp
   
== Gateway: Handling of blind transfer gets stuck in routing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78709 78709]
|}
Routing of transfer call stops with: reason='incomplete'<br/>But during transfer no dialing digits will follow.
   
== PBX-SOAP: UserCall new option diversion override ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=75773 75773]
|}
To initiate calls, which are not diverted by a configured CFU.<br/><br/>Use Info[] element with type="fty-no-cf"
   
== SIP: Support for "Allow-Events: ccnr" and "Allow-Events: ccbs" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=76658 76658]
|}
For interoperability:<br/>Support for "Allow-Events: ccnr" and "Allow-Events: ccbs"
   
== Phone-&gt;PBX LDAP Search returns normalised number to be dialled by phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77261 77261]
|}
1)Phone->PBX LDAP Search returns normalised number to be dialled by phone.<br/>2)Phone receives info about escape digits when registering at its PBX.<br/><br/>With 1) the PBX includes an object's normalized number into the LDAP search result.<br/>With 1) the phone is able to dial that normalized number.<br/>With 2) the phone is able to prefix required escape digits to the received normalized number.
''Status:''
checked in to 10.00, 9.00, 90600
   
== PBX soap method SetPresence ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78092 78092]
|}
PBX soap method SetPresence added to set the presence of a PBX user.
   
== phone ip222, ip232 : USB headsets need not to be configured anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78114 78114]
|}
If an USB headset with a known signature (vendor/product id) is plugged it is automatically enabled. This is indicated by the headset symbol in the status line.<br/>"Phone/Preferences/Start Outbound Call on Electronic Hook Switch (EHS) Signal" is implied in this case because some headsets will loose state if a hoook signal is ignored.  <br/>
''Status:''
checked in to 10.00, 9.00, 90600
   
== phone: ip222, ip232: USB headset support - Plantronics C420,  GN2000 USB - MS OC Version ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78201 78201]
|}
.
''Status:''
checked in to 9.00, 90600
   
== PBX Mobility: No-Alert checkmark as workaround for provider which do not provide Alerting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78410 78410]
|}
Some SIP provider do not provide an Alerting signal when a mobile phone is called. This could result in no ringback signal to the caller or the min/max-alert feature not working.<br/><br/>This new checkmark provides a fake Alerting in case Progress is received
   
== show linux shutdown warning on firmware reset page ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78665 78665]
|}
If linux is running, a warning is now shown, that linux should be shutdowned before a firmware reset is performed.<br/>
   
== Linux: Enable/Disable support link ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78786 78786]
|}
Now the Linux menu is always shown and a link is provided to enable or disable the Linux support (RAM reservation). The support state is also saved in the downloaded configuration file and restored with the upload.<br/>Update: The support state is only saved in the downloaded configuration with password. The state is not saved in the configuration file with standard password or if downloaded by the update server. Please use the next or a later hotfix instead, see also fix #78836.
   
= V9 Hotfix 10 (90600.12) =
Changes included in Version 9 hotfix10<!---->
[http://mantis.innovaphone.com/view.php?id=78895 Definition]
 
 
   
== PBX: Trap if enabling Unknown Registrations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78904 78904]
|}
Collateral Damage from<br/><br/>fix: #77261: Phone->PBX LDAP Search returns normalised number to be dialled by phone
   
== Linux: Enable/Disable configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78836 78836]
|}
With the new feature #78786 the configuration is only saved in the downloaded configuration file with password. Now the information is also included in the configuration file with standard password and in the file downloaded by the update server.
   
= V9 Hotfix 11 (90600.14) =
Changes included in Version 9 hotfix11<!---->
[http://mantis.innovaphone.com/view.php?id=79001 Definition]
 
 
   
== IP222/IP232/IP241: Ethernet link configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78067 78067]
|}
In some case ethernet link configuration and display didnt work.<br/><br/>Now the autoneg status is shown if available, and the phy status if no autoneg didnt complete.<br/><br/>An option to use autoneg with fixed speeds and a link trace option (/ltrace) are added.
''Status:''
orchid_drv.cpp<br/>orchid_drv.h<br/>orchid_drv.xsl
   
== Media Relay: Don't send dummy RTP data on incoming calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78252 78252]
|}
Dummy RTP data is sent just in case a NAT router is within the media path to set a UDP mapping in case both legs of the call contain a NAT router.<br/><br/>An example for such a situation is a call coming from a SIP provider thru a NAT router to the PBX, which forwards the call back out to the SIP provider. The NAT router won't get RTP data from inside to set the mappings.<br/><br/>The dummy RTP was sent to all legs of the call, but it is better to send it to outgoing call legs only, because endpoints calling in may turn off a local ringback tone when receiving dummy RTP
   
== H.323/SIP: Avoid delayed SDP within outgoing calls as far as possible ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78466 78466]
|}
If media renegotiation is needed, to one side of the call an request for a media proposal (in SIP terms, this is an INVITE without SDP) is sent. The media proposal (in SIP terms SDP offer) is then forwarded to the other side.<br/><br/>The request for an offer should if possible not sent with the initial call, because there is equipment which does not handle 'delayed SDP'
   
== Media Relay: Don't terminate T.38 protocol in media relay, forward transparently ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78610 78610]
|}
This should add robustness and reduce CPU load
   
== Flash Directory: Display Error Messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78656 78656]
|}
Flash Directory: Display Error Messages<br/>Shedding light on replication problems.<br/><br/>currently only in 10.00
   
== RTP: No check for changed media destination because of received multicast ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78698 78698]
|}
When receiving RTP normally a check is done if the source of the RTP is the same as we are sending to. If this is not the case, we assume the destination of the RTP is behind a NAT router and we change the destination address to the source address of the received RTP.<br/><br/>This does not make sense for received multicast.
   
== IP22 IP24 IP28 IP305: Faxempfang gelegentlich gest”rt ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78803 78803]
|}
DSP erh„lt zum falschen Zeitpunkt ein close-rtp.
''Status:''
ac_dsp3.cpp
   
== IP1060 IP3010 IP6000 IP6010 IP22 IP24 IP28 IP302 IP305: Fax receive max packet size increased to 1024 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78811 78811]
|}
For internet fax devices
''Status:''
ac_fax3.cpp
   
== phone: ip222, ip232: USB controller sometimes hangs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78824 78824]
|}
happened with certain headsets after fast connect/disconnect sequences
''Status:''
checked in to 10.00, 9.00<br/>merged to 90600
   
== SIP: SDP answer sometimes contains 2 media descriptions for audio ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78833 78833]
|}
... instead of one for audio and one for video.<br/><br/>Offer:<br/><br/>    v=0<br/>    o=- 1 2 IN IP4 130.30.1.111<br/>    s=CounterPath Bria<br/>    c=IN IP4 130.30.1.111<br/>    t=0 0<br/>    m=audio 1902 RTP/AVP 0 8 18<br/>    a=alt:1 1 : 1A98X9/s 31UwK5IA 130.30.1. 111 1902 <br/>    a=fmtp:18 annexb=yes<br/>    a=rtpmap:18 G729/8000<br/>    a=sendrecv<br/>    a=x-rtp-session-id:ACE43888C33A4AC8895C7F8F69380914<br/>    m=video 28212 RTP/AVP 115 34 123 124 <br/>    a=alt:1 1 : yjz/mbyQ aWGuD8xJ 130.30.1. 111 28212 <br/>    a=fmtp:115 QCIF=1;CIF=1;I=1;J=1;T=1<br/>    a=fmtp:34 QCIF=1;CIF=1<br/>    a=fmtp:123 profile-level-id=42801e; packetization-mode=0; max-mbps=48600<br/>    a=fmtp:124 profile-level-id=42801e; packetization-mode=1; max-mbps=48600<br/>    a=rtpmap:115 H263-1998/90000<br/>    a=rtpmap:34 H263/90000<br/>    a=rtpmap:123 H264/90000<br/>    a=rtpmap:124 H264/90000<br/>    a=sendrecv<br/>    a=x-rtp-session-id:694677A9F65D419FB7B9E451FFCA02CC<br/><br/><br/>Answer:<br/><br/>    v=0<br/>    o=- 3141 1 IN IP4 10.230.5.1<br/>    s=-<br/>    c=IN IP4 10.230.5.1<br/>    t=0 0<br/>    m=audio 16410 RTP/AVP 0 13<br/>    b=TIAS:64000<br/>    a=ptime:20<br/>    a=silenceSupp:off - - - -<br/>    a=sendrecv<br/>    m=audio 16410 RTP/AVP 0 13<br/>    b=TIAS:64000<br/>    a=ptime:20<br/>    a=silenceSupp:off - - - -<br/>    a=sendrecv
   
== Conference: Permanent noise in conference channel ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78838 78838]
|}
Permanent noise in conference channel.<br/>Increasing with every new participant.
   
== PBX: When doing a show users, unnecessary data was sent to the browser ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78878 78878]
|}
The data could be reduced and thus speeding up the display of big users lists.
   
== PBX Admin UI: Editing profiles was not possible if the user had too many contacts ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78883 78883]
|}
The form is now submitted using POST instead of GET.
   
== SIP: Wrong number of waiting messages (MWI) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78890 78890]
|}
MWI: Number of voice messages not decoded from incoming NOTIFY(application/simple-message-summary).<br/>Was either 1 or 0.
   
== SIP: Send even anonymous Diversion header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78954 78954]
|}
If diverting party's identity is unknown/hidden.<br/>Diversion: ;reason=user-busy
   
== SIP: Failed to decode presence XML from CUCM ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78967 78967]
|}
Support for namespace "urn:ietf:params:xml:ns:pidf:status:rpid" added.
   
== IP1060 IP3010 IP6000 IP6010 IP22 IP24 IP28 IP302 IP305: Fax failure after transfer #2 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78969 78969]
|}
tone flag was not disabled
''Status:''
ac_dsp3.cpp
   
== H.323: Media problem with SIP call-completion on IP-DECT ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78970 78970]
|}
There was no media on the successful completion call (SDP recived in Progress was not forwarded)
   
== SIP: Send 'Connected Number' in P-Asserted-Identity header of 200/OK ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78974 78974]
|}
Send 'Connected Number' in P-Asserted-Identity header of 200/OK<br/>if different from original called number.
   
== SIP: Re-transmission of ACK with SDP answer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78975 78975]
|}
Handling of re-transmissions of 200/OK with SDP offer.<br/>ACK must contain SDP answer.
   
== IP1060 IP3010 IP6000 IP6010 IP22 IP24 IP28 IP302 IP305: DSP packet debug didnt show some packets, version endian was wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78985 78985]
|}
cleanup
''Status:''
ac_491.cpp<br/>ac_494.cpp
   
== IP-DECT: Radio/Master calls switched to slowstart ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78987 78987]
|}
If first media answer was received with a PROGRESS message, the call leg from the radio to the master was switched to progress (no EFC features are defined for the Progress message).<br/><br/>This could cause media problems later in the call with hold/retrieve/transfer.
   
== SIP: REFER does not work as expected on Gateway interfaces without registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79008 79008]
|}
Bad side effect of a previous fix in HF8:<br/>http://mantis.innovaphone.com/view.php?id=76309<br/><br/>Introducing new SIP interop tweak "Take Refer-To URI as Remote Target URI"<br/>to be found on the Gateway interface config (GWx).<br/>See http://mantis.innovaphone.com/file_download.php?file_id=66299&amp;type=bug<br/><br/><!--<br/>voip.h<br/>gk.cpp/h<br/>sip.cpp<br/>relay_edit_voip.xsl<br/>-->
   
== IP-DECT: Better handling when receiving a call, while a previous call is being released ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79022 79022]
|}
Call to service number, which cause a callback can create problems.<br/><br/><!--<br/>Changed files:<br/>dectradio_call.h<br/>dectradio_call.cpp<br/>-->
   
== Edss1 Interworking: Sending divertingLegInformation2 as PublicPartyNumber(was UnknownPartyNumber) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79025 79025]
|}
Such that the type of number resulting from an interface cgpn-map can also be  asn.1 encoded.
   
== Gateway: Mapping of Message Center Number of MWI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79039 79039]
|}
Mapping of Message Center Number of MWI according to CGPN mapping.
   
== Qsig Interworking: Apply interface CGPN map to DGPN ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79060 79060]
|}
Qsig Interworking: Apply interface CGPN map to DGPN
   
== PBX: A CFB at a PBX object was executed on call to busy user ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79199 79199]
|}
It should only be executed, if the calls exceeded the Busy On number.
   
== PBX: Mapping of Message Center Number of MWI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79232 79232]
|}
Mapping of Message Center Number of MWI.
   
== PBX-SOAP: Conference Id was missing in call-info for parked calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79243 79243]
|}
This caused problems with the innovaphone operator
   
== PBX-SOAP: UserClear cause should not be used for remote party ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79249 79249]
|}
This can result in strange call clearing without tones
   
== PBX: Include error in resulting XML if submit-object with insufficient rights was attempted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79289 79289]
|}
Problem with innovaphone operator.
   
== phone: ip222,ip232,ip241: wrong AM/PM time display on status line ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79302 79302]
|}
15:19 PM was displayed instead of 03:19 PM
''Status:''
checked in to 10.00, 9.00, 90600
   
== Voicemail: Default for mwi.basicService now Speech(1) (was allServices(0)) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79303 79303]
|}
Voicemail: Default for mwi.basicService now Speech(1) (was allServices(0))<br/><br/>May from now on be overriden by variable "$_pbxmwiservice".<br/>
   
== PBX: Local objects could not be called from Nodes with escapes as expected ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79317 79317]
|}
Was not possible to call at all, or the number was wrong
   
== PBX-Trunk: Handling for Incomplete, Invalid, Busy, No Anser destinations for Media calls only ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79319 79319]
|}
For example this should not be done for presence/dialog subscriptions
   
== Refactored some ASN.1 BER Handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79357 79357]
|}
Became necessary in the run of: #79260: ASN.1 BER: Support for indefinite-length encoding
   
== PBX: Conference &amp;amp; VM ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79359 79359]
|}
The last connected user is not disconnected although it is configured. It occurs if a VM PBX object forwards the call to the BC Conference object (like the innovaphone conferencing script). It is fixed now.
   
== IP-DECT: Subscription could get lost randomly with logout/login cycle ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79397 79397]
|}
Problem with user database handling<br/><!--<br/>dectusers.cpp<br/>dectusers.h<br/>-->
   
== H.323: Media problem if PBX rtp-proxy is activated for CFNR to external destination ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79430 79430]
|}
no voice<br/><!--<br/>h323ch.cpp<br/>h323sig.cpp<br/>-->
   
== HTTP: Could not have sockets with same ports but different remote addresses ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79458 79458]
|}
This was a general problem with the new TCP stack, used together with IP6. Problem only happened for HTTP because only for HTTP this new stack is currently used.<br/><br/><!--<br/>ip_user.cpp<br/>tcp.cpp<br/>-->
   
== ISDN: Fix for call completion interworking ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79498 79498]
|}
CCBS/CCNR does not work in some cases<br/><br/><!--<br/>q950.cpp<br/>--><br/><br/>
   
== SIP: From-URI may got lost after call transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79536 79536]
|}
UPDATE may be send out missing From-URI.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== AD Replication stuck after connection loss ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79541 79541]
|}
Didn't reconnect. Side effect of after-hf10 fix<br/><!--<br/>adrep.cpp<br/>-->
   
== PBX Waiting/Broadcast: Incomplete CDRs if CFNR configured on object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79549 79549]
|}
If the CFNR was executed, the CDR for the call to the Waiting Queue/Broadcast object ended without release.<br/><!--<br/>pbx.cpp<br/>pbx_wait.cpp<br/>pbx_bc.cpp<br/>-->
   
== PBX: Web User interface problem with IE and non-ascii PBX names ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79568 79568]
|}
For example groups at a user assigned to a PBX with non-ascii characters could not be edited.<br/>The problem is a bug in IE XSL translation which does special handling of href attributes. Same thing with onclick attribute works.<br/><!--<br/>pbx_objs_left.xsl<br/>pbx_objs_right.xsl<br/>-->
   
== ip3010 TEL port not working in NT mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79570 79570]
|}
TEL port of ip3010 gateways configured in NT mode do not get Physical Link up indication. This problem applies to V9hotfix7 up to V9hotfix10.
''Status:''
ip6010.cpp
   
== SIP: Max forward value of 32 could be too small for some provider ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79578 79578]
|}
For a starting value of max-forwards a value of 32 was used, because this is the maximum value in H.323. This was too small for some sip providers. Starting value now increased to 64 and on H.323 the half value is transmitted.<br/><!--<br/>h323sig.cpp<br/>signal.cpp<br/>signal.h<br/>-->
   
== SIP: Re-negotiation for T38 did not work in media-relay scenarios ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79583 79583]
|}
Bad SDP answer was generated.<br/><br/><!--<br/>sip.cpp<br/>-->
''Status:''
Introduced by<br/> #77277: SIP: SDP answer must have the same number of media descriptions as received offer
   
== HTTP-Client: MD5-sess authentication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77773 77773]
|}
HTTP Digest Authentication with alogrithm=MD5-sess.<br/>Choose the first supported "WWW-Authenticate" line from 401 response headers.<br/><br/>Needed for new versions of IIS.<br/><br/>
''Status:''
http://wiki.innovaphone.com/index.php?title=Support:DVL-Feature_Requests#HTTP_Client
   
== Phone: Possibility to reject incoming SIP calls with customized reason phrase ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77928 77928]
|}
E.g. "SIP/2.0 480 Do not disturb" instead of  "SIP/2.0 480 Temporarily unavailable"
   
== Active Directory Replication: Editfield for Poll Timer added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78631 78631]
|}
If change notifications cannot be received from an AD, a poll timer can be specified. A re-replication is going to take place after the poll timer expired.
   
== X.509: Support for PKCS#12 files ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78820 78820]
|}
Support for certificate import using password encrypted PKCS#12 files.<br/><br/>Currently the following encryption types are supported:<br/><br/>pbeWithSHAAnd128BitRC4 (1.2.840.113549.1.12.1.1)<br/>pbeWithSHAAnd40BitRC4 (1.2.840.113549.1.12.1.2)<br/>pbeWithSHAAnd3-KeyTripleDES-CBC (1.2.840.113549.1.12.1.3)<br/>pbeWithSHAAnd128BitRC2-CBC (1.2.840.113549.1.12.1.5)<br/>pbewithSHAAnd40BitRC2-CBC (1.2.840.113549.1.12.1.6)<br/>
   
== myPBX: Pass language code to reporting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78874 78874]
|}
For localization of the call list.
   
== Phone: Show number of voice messages on label of MWI fkey ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78894 78894]
|}
Use "%u Message(s)" as label text for active state of MWI fkey.
   
== IP-DECT: Cisco SIP conferencing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78988 78988]
|}
Cisco proprietary softkey events implemeneted to start a 3pty conference
   
== IP-DECT: Feature Code for calling predefined service URIs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79028 79028]
|}
User for Cisco compatibility
   
== Cisco Softkey Features, Status updates and Park ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79030 79030]
|}
suported_mask needs more flags<br/>Softkey Feature Park
   
== IP-DECT: Cisco Park ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79032 79032]
|}
Send Park softkey event
   
== IP-DECT: Forward Cisco Status Line Updates related to a call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79036 79036]
|}
.
   
== IP-DECT: SRTP for an OEM device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79061 79061]
|}
Now SRTP is configurable for an OEM device.
   
== IP-DECT: Forward Cisco Status Line Updates not related to a call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79104 79104]
|}
.
   
== Merge of v10 changes: Dynamic Timer Management/oem serial no ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79127 79127]
|}
Better power management on some platforms<br/>Display of oem serial no<br/>stanard behaviour of delete on NULL
   
== Merge of v10 changes: Memory Management ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79129 79129]
|}
for OEM needs
   
== Merge of v10 changes: Firmware File check when updating improved ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79130 79130]
|}
for OEM needs
   
== Merge of v10 changes: More ciphers ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79134 79134]
|}
for OEM SRTP and other Certificate formats
   
== Merge of v10 changes: Internal interfaces enhanced ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79135 79135]
|}
for OEM support
   
== Merge of v10 changes: ZipZip Tone definition updates ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79136 79136]
|}
should overlay normal voice
   
== Merge of v10 changes: Library update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79140 79140]
|}
.
   
== Merge of v10 changes: permit DHCP mode change between client/disabled without reset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79152 79152]
|}
for OEM support
   
== ASN.1 BER: Support for indefinite-length encoding ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79260 79260]
|}
needed for PKCS#12 import<br/>only decoding<br/>
   
== ASN.1 BER: Support for constructed octet strings ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79261 79261]
|}
needed for PKCS#12<br/>only decoding, only one level of nesting
   
== IP810: Config Wizard ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79284 79284]
|}
Mechanism needed to add platform specific files (IP810 uses same firmware as IP6010, IP3010, ...)
   
== Merge of v10 changes: Support for SIP specific phone features ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79306 79306]
|}
for OEM support
''Status:''
checked in to 9.00
   
== phone: permit to select the directories to be searched on indirect dialing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79307 79307]
|}
if there is for example a huge external directory used for inbound name resolution and dialing is restricted to internal partners it may be hard to find internal numbers via combined directory search.<br/><br/>  config add PHONE DIR-UI /dial-mask <selection><br/><br/>selection:<br/>  0x02 - local directory<br/>  0x04 - PBX directory<br/>  0x08 - external directory<br/><br/>  0x06 = local + PBX<br/>  0x0E = local + PBX + external<br/>
   
== IP-DECT: Signal waiting calls to handset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79349 79349]
|}
Was only acoustic information.<br/><br/><!--<br/>Changed files:<br/>fty.h<br/>fty.cpp<br/>dectradio_dectcall.cpp<br/>-->
   
== IP-DECT: LDAP phonebook (IP1202) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79483 79483]
|}
The new feature LDAP phone book for the IP1202 is added now.<br/><!--<br/>Changed files:<br/>config_options.h<br/>config_options.cpp<br/>ascom/ascom_1202.mak<br/>ascom/httpfiles/_inn_dect.xml<br/>dect_comcerto/platform/config.h<br/><br/>New files:<br/>ascom/phonebook_ldap/phonebook_ldap.mak<br/>ascom/phonebook_ldap/phonebook_ldap.h<br/>ascom/phonebook_ldap/phonebook_ldap.cpp<br/>ascom/phonebook_ldap/phonebook_ldap.xsl<br/>ascom/phonebook_ldap/phonebook_ldap.xml<br/>ascom/phonebook_ldap/phonebook_ldap_hdr.xml<br/>ascom/phonebook_ldap/phonebook_ldap_request.h<br/>ascom/phonebook_ldap/phonebook_ldap_request.cpp<br/>ascom/phonebook_ldap/phonebook_ldap_search.h<br/>ascom/phonebook_ldap/phonebook_ldap_search.cpp<br/>ascom/phonebook_ldap/phonebook_ldap_entry.h<br/>ascom/phonebook_ldap/phonebook_ldap_entry.cpp<br/>ascom/phonebook_ldap/config_ldap.h<br/>ascom/phonebook_ldap/config_ldap.cpp<br/>ascom/phonebook_ldap/config_dl.h<br/>ascom/phonebook_ldap/config_dl.cpp<br/>-->
   
== IP-DECT: Three party conference with innovaphone PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79503 79503]
|}
Now it is possible to make a three party conference with DECT handsets with an innovaphone PBX (an innovaphone device with the CONF interface). The conferencing unit must be configured in the DECT master. The conference call is established with the feature code 'R' + '3'.<br/>This fix also includes a rework of the DECT radio module. It can handle more than one waiting or hold call now.<br/><br/><!--<br/>Changed files:<br/>common/style/work.css (innovaphone)<br/>common/interface/channel.h<br/>common/interface/channel.cpp<br/>common/interface/signal.h<br/>common/interface/signal.cpp<br/>dect/dectdisplay_if.h<br/>dect/master/dectmaster.h<br/>dect/master/dectmaster.cpp<br/>dect/master/dectmaster.xsl<br/>dect/localusers/dectlocalusers.h<br/>dect/localusers/dectlocalusers.cpp<br/>dect/radio/dectradio.mak<br/>dect/radio/dectradio.h<br/>dect/radio/dectradio.cpp<br/>dect/radio/dectradio_calls.xsl<br/>ascom/display/dectdisplay.h<br/>ascom/display/dectdisplay.cpp<br/>ascom/httpfiles/asc_dectmaster.xsl<br/>ascom/httpfiles/_inn_asc_dectusers.xsl<br/>ascom/httpfiles/_inn_asc_dectmaster.xsl<br/>kirk/display/display.h<br/>kirk/display/display.cpp<br/><br/>New files:<br/>dect/radio/dectradio_call.h<br/>dect/radio/dectradio_call.cpp<br/>dect/radio/dectradio_fty_call.h<br/>dect/radio/dectradio_fty_call.cpp<br/>dect/radio/dectradio_handover_in.h<br/>dect/radio/dectradio_handover_in.cpp<br/>dect/radio/dectradio_handover_out.h<br/>dect/radio/dectradio_handover_out.cpp<br/>dect/radio/dectradio_reg.h<br/>dect/radio/dectradio_reg.cpp<br/>dect/radio/dectradio_uninit_reg.h<br/>dect/radio/dectradio_uninit_reg.cpp<br/>dect/radio/dectradio_dectcall.h<br/>dect/radio/dectradio_dectcall.cpp<br/>dect/radio/dectradio_mastercall.h<br/>dect/radio/dectradio_mastercall.cpp<br/>dect/radio/dectradio_confcall.h<br/>dect/radio/dectradio_confcall.cpp<br/>-->
   
== Gateway: 'cn' attribute for test interfaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79506 79506]
|}
The 'cn' attribute is included in the test interfaces SIG0/1 for internal tests now.<br/><br/><!--<br/>Changed file:<br/>common/service/dummysig/dummysig.cpp<br/>-->
   
= V9 Hotfix 12 (9061009) =
Changes included in Version 9 hotfix12<!---->
[http://mantis.innovaphone.com/view.php?id=79736 Definition]
 
 
   
== PBX: CFNR at Gateway object with incomplete destination ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79605 79605]
|}
A CFNR at a gateway object is executed if there is no registration. Any additional digits dialed should be added to the CFNR destination. This did not work if the original CFNR destination was incomplete and only completed with additional digits dialed.<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX Waiting: Filter did not work anymore for CFNR ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79610 79610]
|}
Collateral damage from<br/><br/>fix: #75465: PBX: CFNR Loop check detected loops that weren't<br/><!--<br/>pbx.cpp<br/>-->
   
== LDAP Server caused crash on port-scanner attack ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79634 79634]
|}
LDAP Server caused crash on port-scanner attack<br/><!--<br/>ldapsrv.cpp<br/>ldapsrv.h<br/>-->
   
== myPBX: Quotes in connected names caused java script errors ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79636 79636]
|}
When the connected name of a call contained the ' character there was a script error.<br/><!--<br/>client.js<br/>client_dtmf.js<br/>client_util.js<br/>-->
   
== PBX: Status displayed on boolean function key could be wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79643 79643]
|}
In case of severe network problems, it could happen that the status displayed on a Boolean function key was wrong and was only corrected when the boolean status changed.<br/><!--<br/>pbx_bool.cpp<br/>pbx_gi.cpp<br/>-->
   
== DHCP Server Identifier was cleared after editing the DHCP-Server page ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79651 79651]
|}
The value of "IP4/ETHx/DHCP/Server Identifier" was cleared when the OK or Renew button was pressed on the "IP4/ETHx/DHCP-Server" page. This bug was introduced with V9hotfix5.<br/><br/><!-- <br/>dhcp_server.xsl<br/>--><br/><br/>
   
== SIP: Wrong Contact-URI in outgoing NOTIFY ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79700 79700]
|}
Contact-URI should match the Request-URI of the SUBSCRIBE.<br/>Also the Message-Account URI in "simple-message-summary" was wrong as result of the wrong Contact-URI.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== Config: Could not dynamically set or reset /trace on the LICENSE module ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79709 79709]
|}
Missing handling of MODULE_UPDATE.<br/><br/><!--<br/>license.cpp<br/>-->
   
== PBX: Allow call completion only if recall is not prohibited by CFU ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79739 79739]
|}
A CFU loop results in a rejection with busy. A subsequent call completion attempt was allowed and a recall possible was signaled right away. This was very confusing.<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: Handling of Call Pickup ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79741 79741]
|}
Failed to handle INVITE with Replaces as Call Pickup.<br/>Must redirect Pickup call to alerting party.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== myPBX: Problem with checking browser capabilities in Firefox ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79757 79757]
|}
When checking the supported browser features, Firefox thows an uncaught exception if cookies are deactivatd by the user. Therefore myPBX is stuck in the "Loading" screen instead of displaying a configuration hint.<br/><!--<br/>client.js<br/>client_util.js<br/>-->
   
== IP241,IP222,IP232: Show lengthy number information on Partner fkey ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79779 79779]
|}
Toggle between 'show head' and 'show tail' presentation.<br/><br/><!--<br/>forms_color.cpp/h<br/>-->
   
== SIP: DNS resolving of STUN server failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79788 79788]
|}
Wrong STUN server port used (5060 instead of real port).<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== Fax: Channel memory leak ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79815 79815]
|}
Memory leak is fixed in fax channel now.<br/><br/><!--<br/>Changed file:<br/>t30.cpp<br/>-->
   
== PBX: Export to CSV, utf-8 byte order mark was missing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79844 79844]
|}
Without the utf-8 BOM the file was not correctly interpreted as utf-8 by Microsoft Excel and other applications.<br/><!--<br/>pbx_admin.cpp<br/>-->
   
== PBX: For registrations containing name and number, use name to identify the device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79846 79846]
|}
It did depend on the sequence of the name and the number. If the number was first, the first device was selected and the name was ignored. Now the name is used to select the device regardless of sequence.<br/><br/>This is a problem with endpoints which always send name and number for registration.<br/><br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: CLEARMODE does not work since Hotfix10 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79858 79858]
|}
Invalid SDP answer is send:<br/><br/>    v=0<br/>    o=- 4 3 IN IP4 10.28.108.8<br/>    s=-<br/>    c=IN IP4 0.0.0.0<br/>    t=0 0<br/>    m=audio 0 RTP/AVP 125 101<br/>    a=rtpmap:125 CLEARMODE/8000<br/>    a=rtpmap:101 telephone-event/8000<br/><br/><!--<br/>sip.cpp<br/>-->
   
== memory violation in http client when processing an URI &gt; 8000 byte ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79860 79860]
|}
happens when the digest authentication header is constructed <br/><br/><!--<br/>httpclient_i.cpp<br/>--><br/><br/><br/> 
''Status:''
checked in to 10.00, 9.00
   
== PBX Broadcast: Forking/Mobility configured at Broadcast object did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79863 79863]
|}
Mobility can be used now for forking with delay<br/><!--<br/>pbx_bc.cpp<br/>pbx_bc.h<br/>pbx.cpp<br/>-->
   
== Potential trap in packet libraray ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79866 79866]
|}
Ther was a not obvious size limit for packet::put_head and packet::put_tail, which caused a trap if the size was exceeded. This could happen if a CDR exceeded a certain size.<br/><!--<br/>packet.cpp<br/>-->
   
== SIP: Domain Name System (DNS) names compared case sensitive ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79887 79887]
|}
Domain Name System (DNS) names are "case insensitive"<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Interworking with "AUDC-IPPhone" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79892 79892]
|}
RFC-3551 4.5.2<br/>  Even though the actual sampling rate for G.722 audio is 16,000 Hz,<br/>  the RTP clock rate for the G722 payload format is 8,000 Hz because<br/>  that value was erroneously assigned in RFC 1890 and must remain<br/>  unchanged for backward compatibility.  The octet rate or sample-pair<br/>  rate is 8,000 Hz.<br/><br/>Codec description must be: a=rtpmap:9 g722/8000<br/>but "AUDC-IPPhone" sends: a=rtpmap:9 G722/16000<br/>in SDP offer.<br/><br/><!--<br/>sdpmsg.cpp<br/>-->
   
== SIP: Problems with DNS resolving of proxy adresses ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79907 79907]
|}
If resolving of the primary proxy failes, the backup proxy is never resolved.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== IP-DECT: Reset required if Radio password changed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79929 79929]
|}
Now reset required is shown if the Radio password for the Master registration is changed.<br/><br/><!--<br/>Changed file:<br/>dectradio.cpp<br/>-->
   
== Phone: PBX (operator) initiated outbound call was connected but mute when another call was ringing on phone already ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79943 79943]
|}
the phone was not switched from ring mode to handsfree/headset mode <br/><br/><!--<br/>phonesig.cpp<br/>-->
   
== SIP: Interworking with HD audio client ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79953 79953]
|}
Support for unknown codecs.<br/>Passing transparentley.<br/><br/><!--<br/>channel.cpp/h<br/>sdpmsg.cpp/h<br/>sip.cpp<br/>-->
   
== Phone: Out-Of-Memory-Trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79980 79980]
|}
If LOG server is configured but not reachable<br/>the device will buffer arising LOG entries until a limit of 300kB.<br/>This limit was to high for old black/white telephones.<br/>Now not more then 1% of DRAM size is used for LOG buffer.<br/><br/><!--<br/>logging.cpp<br/>-->
   
== PBX: When editing a Node object it was changed to a PBX object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79982 79982]
|}
This was a collateral damage of fix: #78878: PBX: When doing a show users, unnecessary data was sent to the browser<br/><!--<br/>pbx.cpp<br/>-->
   
== ISDN: Problem configuring negative volume levels ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79992 79992]
|}
Collateral Damage from<br/>79028: IP-DECT: Feature Code for calling predefined service URIs<br/><!--<br/>config_options.cpp<br/>dect_comcerto/platform/config.h<br/>-->
   
== Dect: AD replication makes IPEI disappearing on all users ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80015 80015]
|}
Side effect of a previous fix #72672 aiming at ad-replicated and deleted objects coming back to life.<br/><!--<br/>flashdir.cpp<br/>-->
   
== myPBX: Setting CFx with boolean did not work in IE8 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80018 80018]
|}
Using Internet Explorer 8 the selected Boolean object was not saved.<br/>Internet Explorer 8 requires option tags to have a value attribute.<br/><!--<br/>client_diversions.js<br/>-->
   
== IP-DECT: Handover with IP1202 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80022 80022]
|}
Only one handover is possible since the last fix with the IP1202. It is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectradio.cpp<br/>dectradio_call.cpp<br/>dectradio_dectcall.cpp<br/>-->
   
== Name and Number configured for a registration must be completely replaced by registration result ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80039 80039]
|}
If for example Number and Name is configured but the registration result provides the Number only, the configured Name must not be used in further signaling operations (diversion queries ...) <br/><br/><!--<br/>phonesig.cpp<br/>-->
''Status:''
checked in to 10.00, 9.00
   
== PBX: Possible trap on calls from misconfigured nodes/PBXs (node parent loop) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80093 80093]
|}
If a node or PBX is configured with a parent node configured to itself in the most simple case, a call from an endpoint configured for this node to a destination which cannot be found in this node, will cause a trap.<br/><br/>This is a collateral damage of fix: #79317: PBX: Local objects could not be called from Nodes with escapes as expected<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>-->
   
== IP1060 IP3010 IP6000 IP6010 IP22 IP24 IP28 IP302 IP305 IP222 IP232 IP241: receveid RTP packets limited to 480bytes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80111 80111]
|}
increased to 640 Bytes to allow G711 80ms.<br/><br/><!-- ac_phone3.h  ac_dsp3.h --><br/>
   
== DHCP Survivability mode doesn't work after a DHCP restart ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80112 80112]
|}
``Survivabilityïï mode is used by WLAN phones. In this mode the settings of the 'saved lease' (IP addr, mask, ...) are used until a fresh lease is received. The 'saved lease' is the last lease received from a server, it is kept over a reboot.<br/><br/>When WLAN coverage is lost for a while and then regained a DHCP restart is requested to get a fresh lease from a server in a possibly different network. If this happened while using the 'saved lease' the phone lost it's (saved) IP address. 
''Status:''
checked in to 10.00, 9.00
   
== AC-DSP3: Switch trace off if the DSP Host interface shows an error ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80130 80130]
|}
<!-- ac_dsp3.cpp -->
   
== SIP: Keep backup registration while calls are active ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80137 80137]
|}
Terminating backup registration will active calls (through backup system) get disconnected.
   
== SIP: Content of Allow-Events header must be treated case-insensitive ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80173 80173]
|}
Event names are case insensitive.<br/><br/><!--<br/>sipmsg.cpp<br/>-->
   
== IP-DECT/Analog Features: Call Park should be done on the last active call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80209 80209]
|}
Szenario is an active call, then a waiting call comes in, which is accepted, then call park is executed. This call park should be done on the accepted waiting call and not the original.<br/><!--<br/>dtmffty.cpp<br/>-->
   
== IP-DECT/Analog Features: Call completion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80212 80212]
|}
The type of the call is changed back to normal state if the call completion is executed, and facility conversion is added for the call completion state. <br/>This fixes the reusing of features for a call completion callback call, used if IP-DECT/analog features are enabled. This also fixes missed remote hold and retrieve events to the gatekeeper.<br/><br/><!--<br/>Changed file:<br/>dtmffty.cpp<br/>-->
   
== SIP: Handling of 488 for encrypted media ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80246 80246]
|}
If SRTP offer is rejected by remote endpoint with "SIP/2.0 488 Not Acceptable Here"<br/>we should re-try offer without encryption keys.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Phones: Show 'tel' presence on configuration screen ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80274 80274]
|}
Show latest presence on 'Presence' fkey,<br/>but show 'tel' presence on phone config menu.<br/><br/><!--<br/>app_ctl.h<br/>app_gui.cpp<br/>app_reg.cpp<br/>phonesig_if.h<br/>phonesig.cpp<br/>-->
   
== PBX-Waiting: Calls to a Waiting queue object in altering state could not be cleared with SOAP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80291 80291]
|}
A SOAP UserClear issued for the call monitored at the Waiting Queue object didn't do anything<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== Phones: Sometime fkey could not be deleted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80389 80389]
|}
Sometime fkey could not be deleted when using the fast edit mode (long fkey press).<br/><br/><!--<br/>phone_user_func.cpp<br/>phone_config.cpp<br/>-->
   
== IP-DECT: Handset display ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80402 80402]
|}
Names with special characters are not correctly shown in the handsets. This is fixed in the IP1200 now.<br/><br/><!--<br/>Changed file:<br/>dectdisplay.cpp<br/>--><br/>
   
== IP210 IP230 IP240: Handset receiver volume increased, especially at lower frequencies ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80403 80403]
|}
<br/>For better performance with jinlida receiver.<br/><br/><!-- inca_afe.cpp -->
   
== Gateway: Pass through ctSetup facility ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80437 80437]
|}
Lync sends diverting party information inside Referred-By header.<br/>Referred-By is interworked to ctSetup facility.<br/>ctSetup facility needs to be passed through by Gateway application.<br/><br/><!--<br/>relay.cpp/h<br/>-->
   
== Linux: IP address with external DHCP server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80471 80471]
|}
Assigning a IP address to Linux by a external DHCP server is not working if the network interface which is used is configured with a fix IP address (DHCP disabled). This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dhcp.cpp<br/>-->
   
== IP232: Invalid text on second line of fkey label ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80484 80484]
|}
Invalid text on second line of fkey label when changing registrations.<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== PBX: Routing problem from sub-slave to master to object in sub-slave node, but registered to master ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80591 80591]
|}
Collateral damage from #77874: PBX: Routing problem with nodes/escapes/slaves with calls to object in same node but different PBX<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: Calls may remain in clearing state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80623 80623]
|}
SIP calls may remains undeleted.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Code optimization ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80635 80635]
|}
Reduce number object constructions/destructions during message encoding.<br/><br/><!--<br/>siptrans.cpp<br/>-->
   
== PBX: Update of conference id did not always work after multiple transfer accross PBXs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80656 80656]
|}
A scenario which did not work was A calls B, B does consultation to C, B Transfers, C does consultation to D, C transfers with B on different PBX then A.<br/>After this the conference id on the call on A should be identical to the conference id on D. This was not the case.<br/><br/>SOAP/TAPI applications which are keeping track of transfered calls could have a problem with this.<br/><!--<br/>pbx.cpp<br/>-->
   
== AD Replication: LDAP filter encoding failed, when Poll Timer was configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80658 80658]
|}
AD Replication: LDAP filter encoding failed, when Poll Timer was configured<br/><!--<br/>adrep.cpp<br/>--><br/>
   
== PBX: More consistent use of conferenceId after transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80660 80660]
|}
The conference ID is used (SOAP/TAPU, CDRs) to associate different call legs to the same call. After a transfer two calls, which have been seperate are connected, so one of the call legs has to change its conference ID, so that the resulting call has a single conference ID again.<br/><br/>There was a complicated logic implemented in the PBX to decide which conference ID should be used, this is now changed to a simple logic: The conference ID of the call on which the transfer is performed, is used.<br/><br/>Example:<br/><br/>A calls B, B does a consuktation to C, and B transfers A to C - This means the transfer is performed on call leg A, so the conference ID of the original call A-B is used for A-C<br/><!--<br/>pbx.cpp<br/>-->
   
== Gateway: Routing of incoming SIP calls may not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80709 80709]
|}
... because the To-URI is not reduced to a called number (CDPN).<br/>Gateway routing is based on CDPN and does not work for URIs.<br/><br/>Before this fix:<br/>.LOG CALL 2 Alloc<br/>.LOG CALL 2 A:Call    ->                        / GW8::->*::<br/>.LOG CALL 2 B:Call    :081604998@212.13.249.90->:018108680@192.168.5.230 / GW8::->GW1::<br/><br/><br/>After this fix:<br/>.LOG CALL 1 Alloc<br/>.LOG CALL 1 A:Call    ->                        / GW8::->*::<br/>.LOG CALL 1 B:Call    081604998->018108680      / GW8:081604998:->GW1:018108680:<br/><br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Memory leak when closing signaling interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80752 80752]
|}
Memory leak when closing signaling interface while DNS request is pending on a call.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Phone: Message function key cannot be configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80766 80766]
|}
Configuration is not saved<br/><br/><!--<br/>phone_edit.cpp<br/>fkey_edit_message.xsl<br/>-->
   
== SIP: Diversion information was wrong on incoming SIP calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80812 80812]
|}
Parsing of History-Info header was wrong, but only if multiple History-Info headers were present.<br/><br/><!--<br/>sipmsg.cpp/h<br/>-->
   
== PBX: Routing problem with nodes/escapes/slaves with calls to extern numbers in other PBX defined nodes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80853 80853]
|}
Could happen that the number dialed when sending the call to the extern interface was not adjusted correctly<br/><!--<br/>pbx.cpp<br/>-->
   
== Build Number format changed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80925 80925]
|}
The build number of the hotfixes changes from the 90600.xx format to the 9.061xxx format. This is due to organizational changes without any other significance.<br/><!--<br/>box.cpp<br/>-->
   
== IP-DECT: Memory leak for SIP calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80937 80937]
|}
buffer for received name-id was not freed. Could happen with other facilities as well.<br/><!--<br/>dtmffty.cpp<br/>-->
   
== SIP: Transcation handling was wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80989 80989]
|}
Double delete on a INVITE client transaction object.<br/><br/>0:0027:988:5 - SIP_TAC_INVITE:serial::delete(805b0c80) caller=800440ec<br/><br/><!--<br/>siptrans.cpp<br/>-->
   
== PBX: Adjusting called number, when sending call to extern ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81005 81005]
|}
depending on the node of the extern object and the called node, the called party number has to be adjusted (escapes added, prefixes added/removed). This did not work unders some conditions.<br/><!--<br/>pbx.cpp<br/>-->
   
== myPBX: Syslog for sessions and application sharing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77289 77289]
|}
Syslog entries should be useful for debugging session timeouts and problems with the external application sharing solution.<br/><!--<br/>pbx_client.cpp<br/>pbx_client.h<br/>log.xsl<br/>-->
   
== SIP: Pass display names of &lt;dialog-info&gt; to phoneapp ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79543 79543]
|}
Pass display names of <dialog-info> to phoneapp.<br/><br/><!--<br/>fty.cpp/h<br/>sip.cpp<br/>phonesig.cpp<br/>-->
   
== Gateway: Overlap dialing timeout configurable ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79639 79639]
|}
The default of 4s is not good for all applications. Now configurable between 500ms and 6000ms.<br/><!--<br/>relay_edit_route.xsl<br/>gk.cpp<br/>gk.h<br/>gk_if.h<br/>relay.cpp<br/>relay.h<br/>-->
   
== IP-DECT: OEM Configuration of Cisco Features changed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79684 79684]
|}
should depend on installed license<br/><!--<br/>dectmaster.h<br/>dectmaster_if.h<br/>dectfty.cpp<br/>dectfty.h<br/>dtmffty.cpp<br/>-->
   
== myPBX launcher: Automatically move main window into visible area of screen ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79697 79697]
|}
The window might be outside the visible area if the user changed the screen resolution or disconnectes one of the screens.<br/><br/>If the main window is not visible on any screen, it is now moved to the center of the primary screen, when the user clicks the tray icon.<br/>
   
== PBX-SOAP: FindUser optional argument 'nohide' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79734 79734]
|}
Needed if the FindUser is used to look for users which have the 'Hide from LDAP property' set.
''Status:''
<!--<br/>pbx_xml.cpp<br/>pbx900.wsdl<br/>pbx10_00.wsdl<br/>-->
   
== PBX Mobility: Pick mobile call on fixed phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79794 79794]
|}
by dialing number of Mobility object on fixed phone<br/><!--<br/>pbx_mobility.cpp<br/>pbx_mobility.h<br/>pbx.cpp<br/>-->
   
== Gateway: Allow setting of system time from ISDN time ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79889 79889]
|}
In ISDN connect messages a public network is sending a local date and time. By a configuration option this can now be used to update the system time<br/><!--<br/>relay_edit_phys,xsl<br/>gk.cpp<br/>gk.h<br/>gk_if.h<br/>relay.cpp<br/>relay_api.h<br/>-->
   
== IP-DECT: New Master/Radio behavior for license incompatibility ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79914 79914]
|}
The behavior of the DECT Master is changed, if an unlicensed Radio tries to register in. This is only used for an OEM license model.<br/><br/><!--<br/>Changed files:<br/>dectmaster.h<br/>dectmaster.cpp<br/>dectradio.h<br/>dectradio.cpp<br/>asc_dectradio.xsl<br/>asc_dectmaster_radios.xsl<br/>-->
   
== PBX: Better handling of presence information without activity ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80006 80006]
|}
This type of presence information could contain a note which refers to the future<br/><!--<br/>pbx.cpp<br/>-->
   
== RPCAP trace: Indicate transmit/received packets by setting the remote mac address to 00-90-33-00-00-00 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80152 80152]
|}
When reading a trace it is currently not obvious if a packet is sent or received, we need to find out the devices IP address, e.g. by reading the config. If the devices on MAC adress is used a source only if a packet is sent and as destination only if a packet is received this process is simplified.<br/><br/>This is now done for UDP/TCP traces!
   
== SIP: Support for Alert-info:&lt;Bellcore-dr1&gt; ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80174 80174]
|}
Proprietary tagging of internal calls<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: ip222,ip232: more USB headsets supported ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80224 80224]
|}
for a complete list see http://wiki.innovaphone.com/index.php?title=Reference9:Concept_USB_Headset<br/><br/><!--<br/>keys_ip222.cpp<br/>-->
''Status:''
checked in to 10.00, 9.00
   
== Phones: Switch for phoneapp to disable auto-answer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80233 80233]
|}
Disable/enable auto-answer support on phoneapp level.<br/><br/><!--<br/>phonesig_if.h<br/>phonesig.cpp<br/>-->
   
== PBX: DECT attributes for DECT security ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80300 80300]
|}
In preparation for the new DECT feature DECT security there will be new attributes for the endpoint data which must be taken over. With this fix the innovaphone PBX supports the new attributes if the user is edited.<br/><br/><!--<br/>Changed files:<br/>pbx_admin.cpp<br/>pbx_edit_object.xsl<br/>--><br/>
   
== phone: ip222, ip232: Jabra  USB Headset feature "Reject incoming call" supported now ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80401 80401]
|}
A double tap on talk button rejects a ringing call with 'busy'<br/><br/><!--<br/>keys_ip222.cpp<br/>-->
   
== IP-DECT: Signal waiting calls to handset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80408 80408]
|}
New event to the DECT system to add a waiting call to the call list.<br/>This is step two of the implementation and related to the case #79349.<br/><br/><!--<br/>Changed files:<br/>fty.h<br/>fty.cpp<br/>dectmaster.cpp<br/>dectradio_call.cpp<br/>dectradio_mastercall.h<br/>dectradio_mastercall.cpp<br/>h450.h<br/>h450.cpp<br/>h450asn1.h<br/>h450asn1.cpp<br/>--><br/>
   
== IP-DECT: Anonymous endpoint information ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80421 80421]
|}
Information about anonymous endpoint is added to the event to the DECT system. In preparation for the new feature "easy subscription".<br/><br/><!--<br/>Changed files:<br/>signal.h<br/>signal.cpp<br/>dectradio.cpp<br/>-->
   
== IP-DECT: DECT security ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80424 80424]
|}
Some changes in preparation for the new feature "DECT security". This feature will be available later.<br/><br/><!--<br/>Changed files:<br/>signal.h<br/>signal.cpp<br/>dummysig.cpp<br/>dectusers_if.h<br/>dectusers.h<br/>dectusers.cpp<br/>dectmaster.h<br/>dectmaster.cpp<br/>dectradio.h<br/>dectradio.cpp<br/>dectlocalusers.h<br/>dectlocalusers.cpp<br/>dectmobmaster.h<br/>dectmobmaster.cpp<br/>asc_dectusers.xsl<br/>asc_dectradio.xsl<br/>asc_dect_edit_user.xsl<br/>-->
   
== Phone: Accept MWI from Exchange Server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80446 80446]
|}
MS Exchange Server sends unsolicited NOTIFY(message-summary) to served user<br/>with served user's number as destination and origin.<br/>But phones expect to receive MWI message center number as origin.<br/>MWI fkey would not light up.<br/><br/><!--<br/>app_reg.cpp<br/>-->
   
== SIP: New config option /take-zero-addr-for-hold ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80516 80516]
|}
From now on "c=IN IP4 0.0.0.0" is no longer accepted as hold signaling.<br/>Config option /take-zero-addr-for-hold is introduced to get back old handling.<br/><br/><!--<br/>sip.cpp<br/>sip.h<br/>-->
   
== IP-DECT: User log in, endpoint data added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80620 80620]
|}
During the user log in with a change of the IP-DECT Master the endpoint data (product id/software version) is sent to this new one now.<br/><br/><!--<br/>Changed files:<br/>dectlocalusers.cpp<br/>dectradio.cpp<br/>-->
   
== SIP: Pass display information to application ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80632 80632]
|}
Pass display information received in Call-Info header in 200/OK for BYE to app.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== IP-DECT: Idle display update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80654 80654]
|}
Handling of idle display update message in the call release message is added. Used with an OEM PBX.<br/><br/><!--<br/>Changed file:<br/>dtmffty.cpp<br/>-->
   
== myPBX launcher: Configurable hotkey action ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80684 80684]
|}
Options are:<br/>- Copy selected phone number to myPBX<br/>- Show myPBX<br/><!--<br/>Workaround for #76582<br/>ctiwin.cs<br/>Config.resx<br/>Config.Designer.cs<br/>Config.cs<br/>--><br/>
   
== myPBX launcher: Autocomplete configured URLs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80689 80689]
|}
If the user configures just an IP address, it shall be replaced by the full myPBX URL.<br/><br/>For example 192.168.0.10 will be replaced by http://192.168.0.10/PBX0/MY/client.htm.<br/><!--<br/>Config.cs<br/>-->
   
= V9 Hotfix 13 (9061024) =
Changes included in Version 9 hotfix13<!---->
[http://mantis.innovaphone.com/view.php?id=81128 Definition]
 
 
   
== IP222  equalizer update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80004 80004]
|}
- handsfree speaker equalizer enabled<br/>- handset mic and receiver equalizer smoothed<br/>- ADC gain reduced, input gain increased ( after ec ) to avoid clipping<br/>- halfduplex mode disabled<br/><br/><!-- ac_codec3.cpp platform/filter/* -->
   
== IP222 IP232 IP241: repeated ethernet link status 1000M wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80029 80029]
|}
.<br/><br/><br/><!-- orchid_drv.cpp -->
   
== IP222 IP232 : Default LCD backlight standby brightness reduced ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80031 80031]
|}
<br/><!-- config.h -->
   
== IP241 handsfree equalizer update, IP222 handsfree mic equalizer update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80157 80157]
|}
- IP241 handsfree speaker equalizer enabled<br/>- IP241 handsfree micro equalizer enabled<br/>- IP222 handsfree micro equalizer enabled <br/>- All three filter calculated with measured frequency response <br/>- IP241 ADC gain reduced, input gain increased ( after ec ) to avoid clipping<br/><br/><br/><!-- ac_codec3.cpp platform/filter/* -->
   
== phone: ip222, ip232: Pressing Talk button on USB Headset when there is an active and a held call does not transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80413 80413]
|}
Instead of transfer the active call is disconnected and the held call is retrieved
''Status:''
checked in to 10.00
   
== IP241,IP222,IP232: Show name of diverting party in incoming calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80839 80839]
|}
Show name of diverting party in incoming calls (not only number).<br/><br/><!--<br/>forms_color.cpp/h<br/>call-ctrl-ring.png<br/>call_diverted.png<br/>call_transfered.png<br/>backgrounds_320x240.mak<br/>backgrounds_480x272.mak<br/>icons.mak<br/>-->
   
== PBX-SOAP: UserRedirect - original called number got lost ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80854 80854]
|}
For example if an application used an Waiting Queue object to monitor for incoming calls and redirected these calls to agents. The agent receiving the call could not see if the call was diverted to the waiting queue already.<br/><!--<br/>pbx_xml.cpp<br/>-->
   
== SIP: Send 200/OK for MESSAGE(text/plain) when accepted by application ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81017 81017]
|}
Application gives "NormalCallClearing" to SIP stack.<br/>SIP stack better sends "200 OK" instead of "603 Decline".<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Un-escape content of XML elements ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81019 81019]
|}
XML element content requires some resevered characters to be escaped (<>).<br/>These escape sequences (&amp;gt; or &amp;lt;) must be un-escaped onthe receiving end.<br/><br/><!--<br/>xml.cpp/h<br/>sip.cpp<br/>soap.cpp<br/>fault_handler.cpp<br/>webex.cpp<br/>pbx_bool.cpp<br/>pbx_dtmf.cpp<br/>pbx_mwi.cpp<br/>pbx_vm.cpp<br/>pbx_wait.cpp<br/>-->
   
== IP241,IP222,IP232: Two status symbols may overlay each other ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81027 81027]
|}
Symbol for "Call diversion" and symbol for "PIN-locked" overlay each other.<br/>Hide "Call diversion" as long as phone is PIN-locked.<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== SIP: Handling of multiple 401/407 responses ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81045 81045]
|}
Implemented handling of up to 3 401/407 responses per transaction.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Trap while releasing call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81089 81089]
|}
Timer fires during call release and causes trap.<br/><br/><!--<br/>sip.cpp<br/>sipstate.cpp<br/>-->
   
== H.323: Memory leak when sending special OEM H.235 key elements ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81160 81160]
|}
Only happens if Avaya SRTP is enabled in OEM products<br/><!--<br/>h323ch.cpp<br/>-->
   
== H.323: Potential Trap in case of high load and media renegotiation/call clearing collision ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81173 81173]
|}
There is a very unlikely situation when media-renegotiation is started and then the call is cleared, which could cause a message related to the media-renegotiation to be sent to a already deleted call object. High load could make this situation more likely.<br/><!--<br/>h323sig.cpp<br/>-->
   
== IP241 handset equalizer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81174 81174]
|}
Enable IP241 handset micro and speaker equalizer.<br/>Same values as on IP222.<br/>Reduces noise in G711 mode.
   
== IP222: Handset receiver volume increased ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81175 81175]
|}
By 6db, so the volume similar to IP241, but still has low THD+N<br/>
   
== IP1060/3010/6010/22/24/28/302/305: sequence number to DSP changed from byte to word, caused jiter buffer warnings ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81189 81189]
|}
<!-- ac_dsp3.h-->
   
== IP222/232/241/1060/3010/6010/22/24/28/302/305: min jitter buffer changed to 10ms ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81197 81197]
|}
was 35ms, now 10ms as on ip6000/800<br/><br/><!-- ac_dsp3.cpp ac_phone3.cpp -->
   
== IP-DECT: Duplicate call setup ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81213 81213]
|}
The IP-DECT Master sends in some circumstances a call twice to the same radio in the same time. This affects only the IP1202 and OEM devices, not the IP1200, and is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectmaster.cpp<br/>-->
   
== IP-DECT: OEM configuration option ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81214 81214]
|}
The configuration format of an OEM configuration option was changed for the backward compatibility.<br/><br/><!--<br/>Changed file:<br/>dectmaster.cpp<br/>-->
   
== phone_orchid:  micro mute when a waiting call was connected after an outbound call setup had  been cancelled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81229 81229]
|}
- A goes offhook<br/>- B calls A, a waiting call from B is indicated on A<br/>- A goes onhook, phone rings<br/>- A goes offhook again and is connected to B<br/>- A hears B, B doesn't hear A <br/><br/><!-- ac_codedc3.cpp -->
   
== SIP: Pass display information to application ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81230 81230]
|}
Pass display information to application when registration comes up.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP0010 IP1060 IP3010 IP6010: During long reset the ready LED was blinking orange and the Ethernet LEDs were swaped ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81236 81236]
|}
Now the ready LED shows the green blinking during long reset.<br/>The Ethernet LEDs are initialized directly after reset to overwrite the default setting that swaps link and speed.<br/><br/><!-- <br/>ip6010.cpp platform_mv78x00.c ether_mv78x00.c boot_xxx.y<br/><br/>Note: the IPxx10 uses always the 3 pin LED<br/>The 2 pin LED of the IP6000 is not used any more. <br/>The 3 pin LED needs both GPIOs to be zero in off state, with the 2 pin LED both GPIOs can be zero or one in off state.<br/>--><br/>
   
== X.509: Creating certificate containing IPv4 address did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81251 81251]
|}
When creating a certificate or a request with an IPv4 address, the IPv4 address was mapped to an IPv6 address. This was not the expected behaviour.<br/><br/>172.16.10.32 -> ::ffff:172.16.10.32<br/><br/>Now both IPv4 and IPv6 addresses can be used.<br/><!--<br/>x509.cpp<br/>-->
   
== ip222,ip232: waiting calls mute after having been accepted/connected on USB headsets, mainly seen with Jabra LINK 14201-30 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81312 81312]
|}
In some cases only the accepted call was mute and the next call was OK again but the Jabra LINK 14201-30 lost the USB connection in most cases.<br/>Delaying the HID-commands sent to the headset solves this problem.<br/><br/><!--<br/>keys_ip222.cpp<br/>-->  <br/>
   
== PBX: Objects list filter for numbers did not work correctly anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81376 81376]
|}
only top level nodes were displayed<br/>Collateral damage of fix<br/><br/>79982: PBX: When editing a Node object it was changed to a PBX object<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: Pass display information to application ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81379 81379]
|}
Pass display information received in REGISTER response to app.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== IP241,IP222,IP232: Show H323-ID instead of Display Name if Display Name is not available ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81419 81419]
|}
Like on old b/w phones.<br/><br/><!--<br/>forms_color.cpp/h<br/>-->
   
== IP-DECT: Memory leak with special Cisco features ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81463 81463]
|}
Only with special OEM features.<br/><!--<br/>dtmffty.cpp<br/>-->
   
== SIP: Problems with DNS resolving of proxy adresses ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81522 81522]
|}
Not always re-tried when failed at startup.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP241,IP222,IP232: Rendering errors on Fkey configuration screen ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81556 81556]
|}
When scrolling or leaving Fkey configuration screen.<br/>List (Toggle) controls were not rendered correctly.<br/><br/><!--<br/>form_color.cpp<br/>-->
   
== IP-DECT: Mobility Master registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81571 81571]
|}
The Mobility Master does not accept clients with the OEM name IP1202. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectmobmaster.cpp<br/>-->
   
== HTTP: Possible trap on many simultaneous sessions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81597 81597]
|}
Sorting the TCP sessions did not work correctly, which caused an assertion because it could happen that it was not possible to remove a session<br/><!--<br/>ip_user.cpp<br/>-->
   
== IP-DECT: System GUI, disabled local coder options ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81603 81603]
|}
If the PARI function (only IP1202) of the IP-DECT Master is disable, configuration changes on the System GUI do not effect anything. The settings for the local coder are disabled on this GUI page now.<br/><br/><!--<br/>Change file:<br/>_inn_asc_dectusers.xsl<br/>-->
   
== IP-DECT: System settings not to dynamically connected radios ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81612 81612]
|}
System settings should not be sent if the radio-master connection is a dynamic one (IP1202 only). This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectusers_if.h<br/>dectusers.h<br/>dectusers.cpp<br/>dectmaster.cpp<br/>-->
   
== Support for old versions of Jabra BIZ 2400 headset with 48 kHz output sampling frequency ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81613 81613]
|}
the newer versions come with the usual 16 kHz sampling frequency but have the same signature (vendor/product) as the older ones.
   
== SoftwarePhone: Trap with trace and mute ringer event ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81619 81619]
|}
A trap occurs if the trace is enabled and the ringer mute option is toggled.<br/><br/><!--<br/>Changed file:<br/>phone_V5/phone.h<br/>-->
   
== IP222 IP232 IP241: Force same speed of the switch ports for 1000M/100M scenarios ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81693 81693]
|}
In scenarios that operate one Ethernet port with 1000M and the other with 100M the switch througput was low.<br/> Now the 1000M port is reconfigured to 100M, and the throughput is high.<br/><br/><!-- orchid_drv.* -->
   
== SIP: Support for multiple audio media descriptions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81712 81712]
|}
One without encryption and one with encryption:<br/><br/>v=0<br/>o=OpenStage-Line_0 968610650 446118927 IN IP4 10.30.1.144<br/>s=SIP Call<br/>c=IN IP4 10.30.1.144<br/>t=0 0<br/>m=audio 5012 RTP/AVP 9 8 0 18 101<br/>a=rtpmap:9 G722/8000<br/>a=rtpmap:8 PCMA/8000<br/>a=rtpmap:0 PCMU/8000<br/>a=rtpmap:18 G729/8000<br/>a=rtpmap:101 telephone-event/8000<br/>a=silenceSupp:off - - - -<br/>a=fmtp:18 annexb=no<br/>a=fmtp:101 0-15<br/>a=sendrecv<br/>m=audio 5010 RTP/SAVP 9 8 0 18 101<br/>a=rtpmap:9 G722/8000<br/>a=rtpmap:8 PCMA/8000<br/>a=rtpmap:0 PCMU/8000<br/>a=rtpmap:18 G729/8000<br/>a=rtpmap:101 telephone-event/8000<br/>a=silenceSupp:off - - - -<br/>a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:ujVU8G6kgknZnPflRwx8tadNskkp9glas/DFCbC3<br/>a=crypto:2 AES_CM_128_HMAC_SHA1_80 inline:+uoFBNVVhDY5OOGvMOdAlvpxvc98hX/VeProhlwH<br/>a=fmtp:18 annexb=no<br/>a=fmtp:101 0-15<br/>a=sendrecv<br/><br/><br/><!--<br/>sip.cpp/h<br/>sdpmsg.cpp/h<br/>-->
   
== IP232: Show more of collapsed fkeys ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81807 81807]
|}
140px when expanded.<br/>100px when collapsed (80px before).<br/><br/><!--<br/>forms_color_mod.cpp<br/>-->
   
== SIP: Double Replaces header in INVITE after REFER ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81847 81847]
|}
Reject by "Swyx IpPbxSrv/8.1.0.246" with "400 Bad Request(Multiple values in single-value header Replaces)"<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX Mobility: No response for call to busy mobile phone, if no fixed phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81850 81850]
|}
If a user is called with mobility configured and no fixed phone and the mobile phone was busy, then the call did not complete and was hanging as if the number was not complete. The call should be answer with busy instead.
   
== Chrome compatibility issue on PRI statistics page ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81859 81859]
|}
If clear was clicked an error message was displayed
   
== PBX Admin UI: Not possible to change DECT parameters for users with cf/grp admin rights ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81871 81871]
|}
The user interface prohibited the editing of DECT parameters based on the rights of the object to be edited not based on the login
   
== phone: ip222,ip232: when a call is released from remote while another call is waiting the waiting call cannot be accepted. ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81907 81907]
|}
When the call is released from remote a buys tone is generated for two seconds. Therafter phone rings to indicate that the waiting call can be accepted now.<br/>When trying to accept this call by pressing the headset talk button the call was disconnected instead.<br/><br/><!-- keys_ip222.cpp -->
   
== SIP: Memory leak in SIP stack ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82058 82058]
|}
Memory leak in SIP stack.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== myPBX: Interface for tracing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80973 80973]
|}
The web application can now write messages into the trace file of the myPBX launcher.<br/><!--<br/>client.js<br/>client_util.js<br/>-->
   
== Oem Code: Accelerating Boot Snmp Traps ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81132 81132]
|}
Oem Code: Accelerating Boot Snmp Traps
   
== PBX: Handling of call limits at PBX objects improved ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81232 81232]
|}
A call from a PBX, which is sent back to the same PBX is not counted anymore. This can happen because of node-extern.<br/>Incoming calls at master, which are above the limit are rejected now. They can be rerouted on the slave with "Route Master calls if no Master to"<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>-->
   
== SIP: New config option for endpoints not refreshing their registration during call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81243 81243]
|}
Interoperability:<br/>New config option /keep-active-endpoints for endpoints not refreshing their registration during call.<br/><br/>AVM FRITZ!Box Fon WLAN 7270 v2 (UI) 54.05.21 (Apr  2 2012)<br/><br/><!--<br/>sip.cpp/h<br/>siptrans.cpp<br/>-->
   
== UI hint where to update Linux AP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81295 81295]
|}
Changed a hint on the upload/update tab and added a link to the update/upload page on the firmware side.<br/><br/><!--<br/>lang*.inc<br/>application.php<br/>linux.xsl<br/>-->
   
== SIP: New config option /no-certificate-check ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81601 81601]
|}
New config option to disable validation of remote certificate name<br/>when opening outbound TLS connection.<br/><br/><!--<br/>sip.cpp/h<br/>siptrans.cpp<br/>-->
   
== IP-DECT: Own priority for idle display set by messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81616 81616]
|}
The idle display set by messages has got an own priority now.<br/><br/><!--<br/>Changed files:<br/>dtmffty.h<br/>dtmffty.cpp<br/>-->
   
== SoftwarePhone: Support for Jabra PRO 930 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81618 81618]
|}
Support for Jabra PRO 930 with product id 0x1016 added.<br/><br/><!--<br/>Changed file:<br/>hid.tbl<br/>-->
   
== SIP: New config option "No Inband Disconnect" on GW interfaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81803 81803]
|}
Introduced VOIP_OPTION_NO_INBAND_DISC.<br/>Option was missing on Gateway interfaces.<br/><br/><!--<br/>voip.h<br/>sip.cpp<br/>gk.cpp/h<br/>relay_edit_voip.xsl<br/>-->
   
== SIP: New config option /product-id-format ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81880 81880]
|}
Change the User-Agent string from<br/>  User-Agent: (innovaphone IP232/10.00 dvl [90910/90879/501])<br/>into<br/>  User-Agent: innovaphoneIP232x90910x501<br/>with /product-id-format 1<br/><br/><!--<br/>sip.cpp/h<br/>siptrans.cpp<br/>sipmsg.cpp<br/>-->
   
== phone: ip222,ip232: more USB headsets supported ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81972 81972]
|}
Sennheiser and some more Jabra Headsets added. Look for "(since V9hotfix13)" in<br/>http://wiki.innovaphone.com/index.php?title=Reference9:Concept_USB_Headset<br/><br/><!-- keys_ip222.cpp -->
   
== Debug information on assertion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81973 81973]
|}
More debug information on default event handler.
   
== phone: ip222,ip232: support for advanced USB headset functions (redial, reject call, accept waiting call) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81975 81975]
|}
A lot of USB headsets generate special indications to request redialing of last number dialled, to reject a ringing call, to accept a waiting call and to put the active call on hold or to switch between an active and an held call.<br/><br/><!--<br/>keys_gen.cpp<br/>keys_ip222.cpp<br/>forms_color.cpp<br/>forms_impl.cpp<br/>forms_keyboard.cpp<br/>keyboard.h<br/>app_call.cpp<br/>app_reg.cpp<br/>app_ctl.cpp<br/>app_ctl.h<br/>--><br/><br/>
   
= V9 Hotfix 14 (9061046) =
Changes included in Version 9 hotfix14<!---->
[http://mantis.innovaphone.com/view.php?id=82178 Definition]
 
 
   
== Incorrect disk usage calculation for more than 4GB ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81209 81209]
|}
The disk usage calculation was wrong, if more than ~4 GB of the card were used.<br/><br/><!--<br/>fat32.cpp<br/>fat32.h<br/>fat32.xsl<br/>-->
   
== PBX Waiting: Call state shows "Disconnecting" after switch from announcement 1 to announcement 2 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81370 81370]
|}
Announcement disconnect changed state<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== PBX: Switch from Music on Hold to inband ringback on Alert after unpark oder transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81407 81407]
|}
To give the caller feedback that soon somebody may answer the call<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX: Don't forward in-band info indicator if no media channel ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81879 81879]
|}
Not good to indicate in-band info available if no media channel can be negotiated<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: Trap when configuring user presence ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81996 81996]
|}
Trap may occur when configuring user presence.<br/><br/><!--<br/>sip_presence.cpp<br/>-->
   
== HTTP-Server: Configuration of "Public compact flash access" did not work for all cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82064 82064]
|}
E.g. /DRIVE/CF0/Neuer Ordner/ does not work, because HTTP request contains escaped sequences.<br/><br/><!--<br/>http.cpp<br/>-->
   
== phone: ip222,232.241: no notification tone on a successfull redial attempt ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82166 82166]
|}
On a failing or unanswered call the menu key opens the "Recall" menu. If "Redial" is selected the call is automatically redialed for 20 minutes in intervals depending on the result of the previous attempt. On success the user should be notified about the connection.<br/><br/><!-- ac_codec3.cpp --><br/>
   
== IP-DECT: Trap during subscribing handsets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82190 82190]
|}
A trap occurs during subscribing handsets on the IP1200. This is a fix for the previous fix #80424 and fixed again.<br/><br/><!--<br/>Changed file:<br/>dect.cpp<br/>-->
   
== IP-DECT: Wrong release code ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82195 82195]
|}
The IP-DECT sends the wrong release code "User not reachable" if the handset was not connected and the remote parts disconnects. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectradio_dectcall.cpp<br/>-->
   
== IP-DECT: No delay with semi-attended call transfer and SIP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82197 82197]
|}
If the SIP protocol is used and the user do a semi-attended call transfer, the call transfer is directly confirmed again. The semi-attended call transfer is stored in the base station and executed as an attended call transfer if the target party connects.<br/><br/><!--<br/>Changed files:<br/>dectradio.h<br/>dectradio.cpp<br/>dectradio_call.h<br/>dectradio_call.cpp<br/>dectradio_dectcall.h<br/>dectradio_dectcall.cpp<br/>dectradio_mastercall.h<br/>dectradio_mastercall.cpp <br/>-->
   
== IP-DECT: Display info with failed user log-in ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82200 82200]
|}
If the user log-in fails, the cause is shown in the display.<br/><br/><!--<br/>Changed file:<br/>dectradio_call.cpp<br/>-->
   
== IP-DECT: Short tone info by PBX only one time ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82204 82204]
|}
Tone information with defined length and requested by the gatekeeper is played only one time to the handset. This is used by an OEM PBX and fixed now.<br/><br/><!--<br/>Changed file:<br/>dectradio_call.cpp<br/>-->
   
== IP-DECT: Hanging aborted semi-attended call transfers with SIP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82205 82205]
|}
If the SIP protocol is used, a semi-attended call transfer is done by the user and the call transfer can not be executed, the remaining call party is not disconnected. This is added now.<br/><br/><!--<br/>Changed files:<br/>dectradio.h<br/>dectradio.cpp<br/>dectradio_call.h<br/>dectradio_call.cpp<br/>dectradio_dectcall.h<br/>dectradio_dectcall.cpp<br/>dectradio_mastercall.h<br/>dectradio_mastercall.cpp<br/>-->
   
== IP-DECT: LDAP server GUI description ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82258 82258]
|}
The LDAP server GUI description is wrong and corrected now. (The LDAP server can not be a HTTP server.)<br/><br/><!--<br/>Changed files:<br/>dectmaster.xsl<br/>asc_dectmaster.xsl<br/>_inn_asc_dectmaster.xsl<br/>phonebook_ldap.xsl<br/>-->
   
== DHCP: Name registration at WINS was not refreshed as requested by TTL in registration response ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82289 82289]
|}
If the DHCP-client gets a lease containing a WINS-server address and a NETBIOS node type P or M (1 or 2) the client tries to register it's NETBIOS-name (ipxxx-xx-xx-xx) with the WINS-server. The TTL returned by the server in the registration response determines when a name refresh has to be sent. <br/><br/><!-- dhcp.cpp, dhcp.h -->
   
== Phones: Presence info during ringing state may show garbage data ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82306 82306]
|}
In case a presence update arrives at the phone while phone is in ringback state.<br/>Have been observed in conjunction with call forking with mobility only.<br/><br/><!--<br/>app_ctl.h<br/>app_call.cpp<br/>app_disp.cpp<br/>--><br/>
   
== myPBX: Support contact names containing a single quote ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82323 82323]
|}
Configuring contacts with a H.323 id containing a single quote (') caused script errors in the web application.<br/><br/><!--<br/>client.js<br/>client_allows.js<br/>client_dirsearch.js<br/>client_util.js<br/>-->
   
== PBX: RTP-DTMF was disabled by Voice Mail object during re-negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82332 82332]
|}
RTP-DTMF acc. to RFC-2833 was disabled by Voice Mail object during re-negotiation.<br/><br/><!--<br/>pbx.cpp<br/>-->
   
== Gateway CDR with '0. 0' charge amount ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82359 82359]
|}
Should be '0.00' instead<br/><!--<br/>fty.cpp<br/>-->
   
== phone: call completion did not recover when DND(busy) was set at the phone requesting the call completion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82390 82390]
|}
when DND(busy) was set on the phone reqesting the call completion and was cleared some time later a "Recall possible" was not indicated anymore although a pending call completion was indicated on the called phone. <br/><br/><!-- phonesig_if.h, phonesig.cpp, phonesig.h, app_cc.cpp --><br/>
   
== ipv6: memory leak when sending fragmented packets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82394 82394]
|}
<!-- ip6_main.cpp, ip6_route.cpp -->
   
== H.323:No Media for calls with reverse media to a H.323/SIP exclusive Code Media Relay interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82408 82408]
|}
The execlusive coder/media relay config is used to avoid media negotiation problems with carrier which do not support media renegotiations. In case of a call with reverse media to such an interface, this did not work. This happens for example if a CFNR is configured at a Waiting Queue which redirects a call, which received an announcement from the Queue to such interface.<br/><!--<br/>h323ch.cpp<br/>-->
   
== IP-DECT: DECT Users Administration Log-in ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82422 82422]
|}
The GW-DECT module's users administration log-in is fixed.<br/><br/><!--<br/>New files:<br/>dect/users/dect_admin_users.xml<br/>dect/users/dect_tabs_users.xml<br/>ip1200/platform/tabs_dect_users.xml<br/>dect_comcerto/platform/tabs_dect_users.xml<br/>ascom/httpfiles/_inn_dect_tabs_users.xml<br/>ascom/httpfiles/_ascom_dect_admin_users.xml<br/>ascom/httpfiles/_ascom_dect_admin_users_hdr.xml<br/><br/>Changed files:<br/>dect/users/dectusers.mak<br/>dect/users/dectusers.h<br/>dect/users/dectusers.cpp<br/>ascom/httpfiles/httpfiles.mak<br/>ip1200/platform/platform.mak<br/>dect_comcerto/platform/platform.mak<br/>dect_comcerto/platform/config.h<br/>ip1201/platform/platform.mak<br/>ip4001/platform/platform.mak<br/><br/>Removed files:<br/>ip1201/platform/_ascom_dect_admin.xml<br/>ip1201/platform/_ascom_dect_admin_hdr.xml<br/>ip4001/platform/_ascom_dect_admin.xml<br/>ip4001/platform/_ascom_dect_admin_hdr.xml<br/>dect_comcerto/platform/_ascom_dect_admin.xml<br/>dect_comcerto/platform/_ascom_dect_admin_hdr.xml<br/>-->
   
== Kerberos: Allow editing multiple fields in admin UI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82425 82425]
|}
This is a fix for the page General/Kerberos in the admin UI.<br/><br/>Editing more that one item at a time could result in strange effects. Now it is possible to edit multiple fields.<br/><br/><!--<br/>kerberos_db.cpp<br/>kerberos_db.h<br/>kerberos_ldap.cpp<br/>kerberos_ldap.h<br/>-->
   
== phone_inca: when a call completion was set up with CLIR active the called party was not displayed on a possible recall ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82435 82435]
|}
A sets CLIR, A calls B, B is busy<br/>A sets a CCBS request via Menu/Recall<br/>B goes on Hook<br/>A rings and sees 'anonymous' instad of the number of 'B', status line is empty (should show "Recall possible")<br/><br/><!-- forms_gen.cpp --><br/>
   
== IP-DECT: Display info with remote control call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82444 82444]
|}
The display info shown after accepting a remote control call is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectradio_call.cpp<br/>-->
   
== IP0010 IP1060 IP3010 IP6010 IP810 IP22 IP24 IP28 IP302 IP305: enable modembypass ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82458 82458]
|}
Modembypass is enabled on all calls with disabled T.38 and coders G711A or G711U. <br/>Switch to modem bypass is indicated in the trace by "switch to modembypass".<br/>The feature can be disabled with http://addr/AC-DSP0/mod_cmd.xml?xsl=dsp.xsl <br/><br/>Modembypass works best if T38 is disabled on both sides.<br/>If T38 is enabled on the called side the CED may trigger a T38 session, this changed back to voice and modem bypass is enabled (if G711 is active). The first modem tone is interupted, but we still have modembypass on both sides.<br/>If T38 is enabled on the calling side the calling side stays on regular G711.<br/><br/><br/><br/><!-- ac_dsp3.cpp ac_dsp3.h dsp.xsl --><br/>
   
== IP0010 IP1060 IP3010 IP6010 IP810 IP22 IP24 IP28 IP302 IP305: reduce probability of false DTMF detection ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82470 82470]
|}
Change DTMF signal to noise ratio from 12db to 18db<br/><!-- ac_dsp3.cpp  --><br/><br/>
   
== IP800 IP6000: reduce probability of false DTMF detection ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82471 82471]
|}
Change DTMF detector signal to noise ratio from 12db to 18db.<br/><!-- ac_dsp2.cpp  --><br/><br/>
   
== Gateway: 'Enable PCM' option added at the CONF interface of the IP800 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82481 82481]
|}
The option 'Enable PCM' is available at the CONF interface of the IP800 now.<br/><br/><!--<br/>Changed file:<br/>config.h<br/>-->
   
== Gateway: PCM mode of the CONF interface fixed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82482 82482]
|}
The PCM mode of the CONF interface is not activated for a call even though it is configured and possible. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>conference_sig.cpp<br/>-->
   
== IP0010 IP1060 IP3010 IP6010 IP810 IP22 IP24 IP28 IP302 IP305: T38 trace flag added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82484 82484]
|}
Allows to trace T38 connection on the PCM port and on the DSP host interface.<br/>Use this if fax modem problems are suspected.<br/>Enable at http://addr/debug.xml at trace->T38 trace.<br/><br/><!-- ac_dsp3.cpp ac_dsp.h ac_491.cpp ac_494.cpp ip6010/ip24: trace.xsl -->
   
== Gateway: Routing problem with blockdial route and following matching non-blockdial incomplete routes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82486 82486]
|}
Example:<br/><br/>Blockdial Route 00-><br/>After this a non-blockdial route with 0...<br/><br/>If now a number of 001 was dialed, the first route should match and after the enbock dialout the call should be sent to the destination of the route. Instead the call was rejected with "no destination found"
   
== failure of analog ports of ip28 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82488 82488]
|}
ip28 analogue ports do not react to incoming calls and hook-off. Problem could only be solved by reset.
   
== Debug "HTTP_GET LOG_HTTP.1: retry, authentication failed" removed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82499 82499]
|}
<!-- httpclient_i.cpp -->
   
== Phone: Display text received with BYE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82525 82525]
|}
Pass display text to phoneapp.<br/><br/><!--<br/>phonesig.cpp<br/>-->
   
== SIP: Trap during call handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82544 82544]
|}
Trap during call handling<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP0010 IP1060 IP3010 IP6010 IP810 IP22 IP24 IP28 IP302 IP305: update to DSP code 660.27 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82551 82551]
|}
660.27 is the released version on the audiocodes web.<br/>Fax relay and modem bypass improved.<br/><br/><!-- <br/>Laut AC49x Voice over Packet Processor (VoPP) Release Notes Ver 6.6 Rev3 bei den Gateways keine wesentliche Žnderung zu 660.19, also nur ein update um auf Stand zu sein.<br/><br/>ac_491.cpp ac_494.cpp ip24.mak ip6010.mak ac_firmware.h -->
   
== IP222 IP232 IP241: update to DSP code 660.27 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82554 82554]
|}
660.27 is the released version on the audiocodes web.<br/>Improved acoustic echocanceller.<br/><br/><!-- <br/><br/>ac_494e.cpp ac_codec.cpp phone_orchid.mak  -->
   
== phone: call forwarding options offered even when call forwarding was not  possible ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82567 82567]
|}
Call forwarding is not supported when running SIP. But when the menu key was pressed after entering a number call forwarding options were offered (happened with the primary registration only). <br/><br/><!-- phone_user.cpp -->
   
== PBX Mobility: Trap in case of Transfer of a call from a mobile endpoint to another mobile endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82584 82584]
|}
The Trap happens in the following call scenarion<br/>- Mobile endpoint calls in, using mobility two-stage dialing<br/>- call is accepted at local phone<br/>- on local phone a consultation call is initiated to another user with mobility<br/>- when mobile phone rings, a transfer is initiated on local phone<br/>- the called mobile phone accepts the call<br/>- the trap happens when the called mobile phone hangs up<br/><br/>There could be other call scenarions where the trap happens as well
   
== SIP: SRTP key exchange failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82616 82616]
|}
Bug in base64 decoding of SRTP key.<br/><br/><!--<br/>sdp.cpp<br/>-->
   
== PBX Trunk: Number to Name Feature did not work for calls to busy endpoints ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82619 82619]
|}
Such a call was not rejected with cause 'User Busy', but was just hanging.
   
== PBX Mobility: Call to mobile phone was sent with invalid diverting information ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82622 82622]
|}
A call to a mobile phone is sent with a diverting leg2 info, which means, the call contains the information, that it was diverted by the called user to the mobile phone. So in theory this could be displayed on a mobile phone.<br/><br/>The coding of this information was wrong and created interop problems with some networks.<br/><!--<br/>pbx_mobility.cpp<br/>fty.h<br/>-->
   
== SIP: Trap on subscription handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82623 82623]
|}
Trap on RAS_REGISTRATION_VERIFY between sending SUBSCRIBE and receiving 200/OK.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== SIP: Removed cisco-special retrieve signaling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82637 82637]
|}
Removed cisco-special retrieve signaling.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: ip222,ip232:  Plantronics APU70 - Savi 7xx - Radio Link not cleared on release from remote ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82654 82654]
|}
On a release from remote for a call set up by pressing the Talk button (headset or base) the Radio Link between base and headset was not cleared until the Talk button was pressed again. <br/><br/><!-- keys_ip222.cpp -->   
   
== SIP: Mobility did not work due to RTP-DTMF ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82674 82674]
|}
DTMF must be passed through signaling channel to get mobility working.<br/>Suppress RTP-DTMF capability in SDP answer also.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP3010 IP810: number of DSP channels and number of conference channels was wrong. ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82675 82675]
|}
Now the IP810 shows 20 DSP channels and 30 conference channels.<br/>Now the IP3010 shows 42 DSP channels and 60 conference channels.<br/><br/><!-- ac_491.dsp ac_491.h adsp2191_drv.cpp adsp2191_drv.h ip6010-config.h ip6000 config.h -->
   
== SIP: Restart NAT discovery if failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82676 82676]
|}
Restart NAT discovery if failed<br/><br/><!--<br/>sip.cpp<br/>siptrans.cpp<br/>-->
   
== IP222 IP232 IP241: Reduce DTMF level ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82685 82685]
|}
During DTMF receive and transmit levels similar as on IP240 are used<br/><br/><!-- ac_phone3.cpp <br/>Beim Inca ist das so definiert:<br/>" /playback_dtmf_tx_coeff_LEV12 28"<br/>" /playback_dtmf_tx_coeff_ATT12 c0"<br/>0x28=40 --> -10db level<br/>0xc0=208--> 22db attenuation<br/>also insgesamt ein level von -32db ( bei Vollauschlag ) oder -29dbm.<br/>Der alte Wert beim ac_phone3.cpp war -9db <br/><br/>Weitere Diskussion:<br/>Es gibt den Fall das inband DTMF zum IP Netz geschickt wird, da gabs in Fall 59846 die Žnderung zum IP mit LEV=0x28 -->-10db und Attenuation 0xff-->18db, also mit -28db zu senden. <br/>Da das gut funktioniert und die beiden  Pegel nicht so unterschiedlich sind unde der ac_dsp3 nicht unterschiedliche Pegel zum IP und zum Codec kann  nehmen wir die -28db=-25dbm.<br/><br/><br/>Laut www.itu.int/rec/dologin_pub.asp?lang=e&amp;id=T-REC-Q.24-198811-I!!PDF-E&amp;type=item Tabelle A-1 sind die  -25dbm am unteren Ende, da ist vom Wert A <br/>-22..-30 je nach Administration die Rede. Wahrscheinlich ist das kein Problem,<br/>bei Audiocodes (ac_dsp2) kann man die sensitivity von -28 bis -38db einstellen (DTMF_DETECTION_ENERGY_THRESHOLD__28dBm)<br/><br/><br/>-->
   
== IP222,IP232: Going offhook in call list always dials first list entry (not touched list entry) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82732 82732]
|}
Going offhook in call list always dials first list entry (not touched list entry)<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== Memory leak after Firmware or Bootcode download ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82740 82740]
|}
After a Firmware or bootcode download via Maintenance/Download the associated command processor instance was not released.<br/><br/><!-- command.cpp -->
   
== IP-DECT: Call transfer compatibility with SIP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82742 82742]
|}
For compatibility reasons with the SIP protocol the call transfer initiate result message should not be sent until the connect message is received. This is changed now again.<br/><br/><!--<br/>Changed files:<br/>dectradio_call.cpp<br/>dectradio_mastercall.h<br/>dectradio_mastercall.cpp<br/>-->
   
== SIP: Trap if multiple calls arrive at same time ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82743 82743]
|}
Trap if multiple calls arrive at same time.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== SIP: Bug in digest authorization ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82761 82761]
|}
Sometimes wrong method is used in digest calculation.<br/><br/><!--<br/>sip.cpp<br/>siptrans.cpp/h<br/>-->
   
== phone: ip222,ip232:  USB headset mute after activation of changes in codec parameters, headset icon cleared on status line ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82823 82823]
|}
After for example<br/>  config add AC-DSP0 HEADSET /InputGain 32<br/>  config activate<br/>the headset icon was cleared on status line and the headset was mute although the headset Talk key was handled. <br/><br/><!-- ac_codec3.cpp -->  <br/><br/>
   
== PBX Waiting: Evaluate Busy on ... Calls for calls to an operator ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82858 82858]
|}
If a operator has configured Busy on 1 call, there should be no call from the Waiting Queue if the operator is already busy.
   
== PBX: Avoid signaling loop after call transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82865 82865]
|}
A signaling loop could be created by calling from a phone registered at one PBX to a phone at another PBX, then putting the call on hold and do the same call again, accept on the other side the waiting call. If both parties do then a transfer there is the signaling loop.<br/><br/>Such loop ist now detected and the call is cleared.<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX Broadcast: No diverting name sent with broadcasted call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82880 82880]
|}
The diverting and original-called name info was missing from the diverting leg2 info generated by the broadcast object<br/><!--<br/>pbx_bc.cpp<br/>pbx_bc.h<br/>-->
   
== Web-UI: Misplaced reset-required indication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82896 82896]
|}
Misplaced reset-required indication on ISDN interface config (TEL1,TEL2,...).<br/><br/><!--<br/>ipac_drv.xsl<br/>isdn.xsl<br/>-->
   
== IP0010 IP1060 IP3010 IP6010 IP810 IP302 IP305: ISDN: Enable fax detection only after connect - fixed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82900 82900]
|}
Fax detection was not enabled in all cases.<br/><br/><br/>Happens in test/10.00/box/dsp/ip6010 with<br/> fix: #78316: SIP/H.323: Don't complete media negotiation if no media can be seen<br/><br/><!-- ac_dsp3.cpp -->
   
== IP1060: Memory size is not correctly shown ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82906 82906]
|}
The memory size is not correctly shown in the IP1060 in diagnostics counter page.<br/><br/><!--<br/>Changed file:<br/>ip6010.cpp<br/>-->
   
== phone: a calling party name found by inverse directory lookup  for an external call was sometimes not stored in call list ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82919 82919]
|}
When the external call setup came in with a name identification provided by the external source and there was another name found by inverse directory lookup the name from directory was displayed on the call screen but the name identificication was stored in the call list. Now the name found by inverse directory lookup will be stored.<br/><br/><!-- app_call.cpp -->
   
== PBX Routing: Node extern did not work for calls from a trunk marked as local object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82948 82948]
|}
The call was not routed back to the originating slave<br/><!--<br/>pbx.cpp<br/>-->
   
== IP222 IP232 IP241: New equalizer and volume setting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82952 82952]
|}
- use equalizer up to approx 6db<br/>- use digital volume to adjust volume<br/> <br/><!-- ac_codec3.cpp filter/* --><br/>
   
== SIP: Trap on out of memory ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83004 83004]
|}
SIP-Client allocations not deleted.<br/>Outbound control calls without facility interworking.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX Routing: A CFNR at a PBX object for WAN re-routing did not work if it contained escapes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83017 83017]
|}
The number configured at the PBX object is interpreted in the context of the node of this PBX object. If escapes were needed to dial the WAN trunk, it did not work.<br/><!--<br/>pbx.cpp<br/>-->
   
== External-UC: Presence info assigned to wrong PBX object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83020 83020]
|}
When presence eventlist is received from External-UC<br/>all presence info was assigned to same PBX object.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX: Editing Config Templates impossible, if by some old firmware a strange config ended up in a User object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83033 83033]
|}
The problem was a empty hardware id (hw=""). This is now ignored.<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX mobility: The forking destination put in for mobility at a user should be dialed from the node of the user ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83040 83040]
|}
This number was dialed from the node of the Mobility object. This was confusing, because this number was configured at the user and it was also different behaviour as with forking without mobility<br/><!--<br/>pbx_mobility.cpp<br/>-->
   
== PBX: Standyby PBX generated alarms for missing slave registrations, even if active PBX up ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83089 83089]
|}
There should be only an alarm, if the standby PBX is active<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: One-way audio after mutual hold on dect systems ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83126 83126]
|}
Dect ep gets FTY_HOLD_NOTIFY but no FTY_RETRIEVE_NOTIFY.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== X.509: Avoid alarms on missing system time after reboot ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83137 83137]
|}
Allow 60 seconds for setting the system time before an alarm is set. Also certificates are now rejected silently, in that time.<br/><!--<br/>x509.cpp<br/>x509.h<br/>-->
   
== SIP: Problems with presence signaling on External-UC link ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83177 83177]
|}
Missing parameters on Contact-URI in 200/OK for SUBSCRIBE(presence):<br/>  maddr<br/>  transport<br/><br/>Wrong Contact-URI in presence XML in PUBLISH.<br/><br/><!--<br/>sip.cpp<br/>sip_presence.cpp<br/>--><br/>
   
== IP-DECT: Support for more than 32 LDAP attributes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83191 83191]
|}
The IP-DECT devices support up to 256 LDAP attributes now.<br/><br/><!--<br/>Changed file:<br/>dectusers.h<br/>-->
   
== PBX: Support for more than 64 LDAP attributes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83192 83192]
|}
The PBX supports up to 256 LDAP attributes now.<br/><br/><!--<br/>Changed file:<br/>pbx.h<br/>-->
   
== IP-DECT: LDAP replication alarm loop ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83249 83249]
|}
If the LDAP replication is configured, but it can not be synchronized, there is an alarm loop. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectusers.cpp<br/>-->
   
== Gateway: On IP24, IP302, IP305 it could happen that multiple routes disappeared if a route was deleted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83278 83278]
|}
Hard to predict when this happened.<br/><!--<br/>gk.cpp<br/>-->
   
== Gateway: No Media received event was generated for T.38 calls, which started without actual RTP Traffic ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83433 83433]
|}
This happend for calls to/from Fax servers, which switch to T.38 without sending any RTP packets first.<br/><!--<br/>media.cpp<br/>-->
   
== SIP: Multiple subscriptions for 'message-summary' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83469 83469]
|}
After every RAS_START another subscription for 'message-summary' is established.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: support PBX-directory access via TLS ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78275 78275]
|}
A "Use TLS" checkmark has been added to the PBX directory config of the phone. If set, port 636 is used instead of port 389.<br/><br/><!-- phone_config.cpp, phone_config.h, phone_edit.cpp, reg_edit_dir.xsl, phone_dir.cpp -->
   
== PBX-Mobility: Data Call Thru ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81513 81513]
|}
To speed up dialing with the mobility client, the called number can be posted to the PBX via HTTP before the call<br/><!--<br/>pbx_admin.cpp<br/>pbx_api.h<br/>pbx.h<br/>pbx.cpp<br/>pbx_mobility.h<br/>pbx_mobility.cpp<br/>-->
   
== IP-DECT: DECT security (2) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82191 82191]
|}
Some changes in preparation for the new feature "DECT security". This feature will be available later (IP1202).<br/><br/><!--<br/>New files:<br/>ascom/mobmaster/registration_context.h<br/>ascom/mobmaster/registration_context.cpp<br/>ascom/mobmaster/cryptomaster.h<br/>ascom/mobmaster/cryptomaster.cpp<br/>ascom/mobmaster/cryptomaster_registration.h<br/>ascom/mobmaster/cryptomaster_registration.cpp<br/>ascom/mobmaster/crypto_key_table.h<br/>ascom/mobmaster/crypto_key_table.cpp<br/>ascom/mobmaster/crypto_key_table_entry.h<br/>ascom/mobmaster/crypto_key_table_entry.cpp<br/>ascom/httpfiles/asc_dectcryptomaster.xsl<br/>ascom/httpfiles/asc_dectcryptomaster_mobmasters.xsl<br/><br/>Changed files:<br/>common/interface/signal.cpp<br/>dect_comcerto/platform/config.h<br/>ip1201/platform/config.h<br/><br/>dect/dectusers_if.h<br/>dect/users/dectusers.cpp<br/>dect/master/dectmaster.cpp<br/>dect/localusers/dectlocalusers.cpp<br/><br/>ascom/mobmaster/mobmaster.mak<br/>ascom/mobmaster/dectmobmaster.h<br/>ascom/mobmaster/dectmobmaster.cpp<br/>ascom/httpfiles/httpfiles.mak<br/>-->
   
== IP-DECT: No fall-back after unattended call transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82198 82198]
|}
Now there is no fall-back after an unattended call transfer and the behavior is consistent with the other call transfer types (attended, semi-attended). To switch back to the hold call the R-key must be pressed.<br/><br/><!--<br/>Changed file:<br/>dectradio_call.cpp<br/>-->
   
== IP-DECT: Idle display update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82199 82199]
|}
Handling of idle display update message in the call release message is added. Used with an OEM PBX.<br/><br/><br/><!--<br/>Changed files:<br/>dectmaster.cpp<br/>dectfty.cpp<br/>-->
   
== phone: ip222,ip232: the variable KEYS0/HID-MAP permits to map new USB headsets to builtin descriptors ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82635 82635]
|}
Sometimes USB headsets come with a signature different from the signature of similar headsets which are already supported.<br/>A "vars create KEYS0/HID-MAP p <map>" maps the new signature to an existing one.<br/><map> format is<br/>  manufacturer:product=manufacturer:product<br/>the second manufacturer:product tuple is the signature of an already supported headset,<br/>'manufacturer' and 'product' are plain 4 digit hex numbers without a "0x" prefix.<br/><br/><!-- keys_ip222.cpp -->
   
== IP2x2, IP241: Coder Preferences for prefered coder G.722 suboptimal ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82815 82815]
|}
In case G.7222 was selected as prefered coder and the called endpoint did not support G.722, as next best coder G.729 was selected. This is typically not what is desired in such a case, G.711 is the better alternative in this case<br/><!--<br/>ac_dsp3.cpp<br/>ac_phone3.cpp<br/>-->
   
== myPBX: Show version of launcher in the list of sessions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82821 82821]
|}
The version of the used launcher is now shown on the page PBX/myPBX.<br/><!--<br/>ctiinterface.cs<br/>pbx_client_sessions.xsl<br/>pbx_client.h<br/>pbx_client.cpp<br/>client.js<br/>client_util.js<br/>-->
''Status:''
checked-in: 10.00<br/>checked-in: 9.00
   
== H.323: Support for Avaya SRTP with AES128/80 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82829 82829]
|}
Needed for OEM<br/><!--<br/>h323ch.cpp<br/>h323lib.cpp<br/>h323lib.h<br/>-->
   
== SoftwarePhone: HID Support for new headsets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83184 83184]
|}
With this new version the following headsets are supported for call control:<br/>- Jabra GO 6430 (Jabra LINK 350 USB with firmware 5.4.17 or later) with product id 0xa342. Please select the first device.<br/>- Jabra SUPREME UC (Jabra LINK 360 USB) with product id 0xa346. Please select the first device.<br/>- Jabra PRO 9470 with product id 0x1042.<br/>- Sennheiser VoIP USB headset (SH 350 IP) with product id 0x0008.<br/>- Sennheiser DW Office with product id 0x740a. Please select the first device.<br/>- Sennheiser CEHS-CI 02 (USB adapter cable) with product id 0x0030. Please select the second device.<br/><br/><!--<br/>Changed files:<br/>hid.tbl<br/>sphone_keys.cpp<br/>-->
   
== PBX: Description was missing for DECT System object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83198 83198]
|}
A configurable description is useful for the DECT System object as for all other objects<br/><!--<br/>pbx_edit_dect.xsl<br/>-->
   
== Permit logging to a second (shadow) log server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83206 83206]
|}
"Services/Logging/Log Server/Log Server Shadow/Address" defines the adress of a second server. <br/>"Services/Logging/Log Server/Log Server Shadow/Enable" starts/stops logging to the second server.<br/>Except the address the configuration for the second server is copied from the first server.<br/><br/><!-- logging.cpp, logging.h, logging.xsl platform/config.h --><br/>
   
= V9 Hotfix 15 (9061078) =
Changes included in Version 9 hotfix15<!---->
[http://mantis.innovaphone.com/view.php?id=83650 Definition]
 
 
   
== IP-DECT: Trap during subscribing handsets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83690 83690]
|}
A trap occurs during subscribing handsets on the IP1200. This is a fix for the previous fix #80424 and fixed again.<br/><br/>Trap identification: <br/>XCPT: no 2 (TLB load)  pc 942e23d8  ra 942e23cc  va 00000000<br/><br/><!--<br/>Changed file:<br/>dectusers.cpp<br/>-->
   
== PBX Waiting: Trap on leak-check if dtmf maps are configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83691 83691]
|}
Only happened if debug.xml leak check was used<br/><!--<br/>pbx_wait.h<br/>-->
   
== IP222 IP232 IP241: Adjust gains for better echo canceller performance ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83703 83703]
|}
..<br/><!-- <br/>Use original EC mode by selecting mode 2.<br/>Max output gain reduced to avoid strong echo<br/>ADC input gain max<br/>Digital input gain set to 0db.<br/><br/>ac_phone3.cpp ac_codec.cpp -->
   
== myPBX: Remove unimportant notifications ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83707 83707]
|}
The following events are not so important that the user has to be notified using a windows bubble notification.<br/>- Visibility requests<br/>- Missed calls<br/><!--<br/>client.js<br/>--><br/>
   
== IP222 IP232 IP241: Enable noise reduction ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83715 83715]
|}
Enable noise reduction on all handset/handsfree/DHSG headset micro.<br/>Use  DSP code 660.27.pa.03<br/><br/>Noise reduction parameter can be tuned at<br/>http://addr/AC-DSP0/mod_cmd.xml?xsl=phone-dsp.xsl<br/><br/><!-- <br/>ac494e002ce4.660.27.pa.03.h ac494eac_494e.cpp ac_phone3.cpp ac_phone3.h phone-dsp.xsl <br/>-->
   
== Voicemail: Prevent &lt;prompt&gt;, &lt;record&gt; on incoming control calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83826 83826]
|}
Turned out to cause idle-reset requests never being processed.<br/><br/>An administrative solution also exists: Watch out for the URL variable "$_noctl" in this article:<br/>http://wiki.innovaphone.com/index.php?title=Howto:Configure_the_innovaphone_Voicemail#URL_Query_String_Variables<br/><br/><!--<br/>pbx_vm.cpp<br/>-->
   
== HTTPCLIENT: Allow configuration of a http authenticated URL even if the server needs no authentication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83900 83900]
|}
If a password was configured and the server didnt need it, a HTTP put created a file of zero length.<br/><br/><!-- httpclient_i.cpp httpclient_.h --><br/><br/>
   
== PBX Waiting: Trap on collision of operator connect and two-stage dialing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83926 83926]
|}
If two-stage dialing (Maps) is used to call a Trunk or Gateway object, the call is sent after a blockdial timeout. If an operator connected the call before this timeout happened, a trap occured.<br/><br/>For this to happen DTMF maps and operators have to be configured on the same Waiting Queue object, with is kind of unusual<br/><!--<br/>pbx_wait.cpp<br/>pbx_wait.h<br/>-->
   
== PBX: Call to a Trunk/Gateway was not marked correctly as external, if no connected number was received ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83940 83940]
|}
Calls from a Trunk must be explicitly marked as internal with respective connected number, otherwise they should be treated as external<br/><!--<br/>pbx.cpp<br/>pbx_mobility.cpp<br/>-->
   
== HTTP: Chunked transfer fails if the last 2 bytes of the chunk header are in the next tcp packet ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83986 83986]
|}
Seen with the application platform as broken pipe<br/><br/><!-- http.cpp -->
   
== PBX: Registration with Name/Number did not work correctly if default device not first ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83989 83989]
|}
For a registration with name or number, the information if the PBX password shall be used was always taken from the first device regardless if this was the default device (hw-id identical to name) or not<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX: Partial Rerouting was prohibited in Alerting State (CFNR) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83993 83993]
|}
This was done under the assumption the partial rerouting is not supported as CFNR by public networks.<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX Waiting: Call to operator with Twin Phone Checkmark did not work anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84084 84084]
|}
Collateral damage of<br/><br/>fix: #82858: PBX Waiting: Evaluate Busy on ... Calls for calls to an operator<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== SoftwarePhone: Product string ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84119 84119]
|}
The product string is changed, used e.g with the PBX registration.<br/><br/><!--<br/>Changed file:<br/>portkernel.cpp<br/>-->
   
== Webfax: Vertical resolution ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84171 84171]
|}
The vertical resolutions 96 lpi, 196 lpi and 400 lpi are correctly saved in the SFF file with a proprietary definition known by the tool sfftobmp.<br/><br/><!--<br/>Changed files:<br/>facsimile_sff_def.h<br/>facsimile_g3.h<br/>facsimile_g3.cpp<br/>facsimile_ECM.h<br/>t30.cpp<br/>--><br/>
   
== phone: provide complete dialog info to a phoneapp ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84192 84192]
|}
Both group indications and dialog infos are signaled via a group indication facility. For dialog infos the parked_to_alerting member was overloaded to provide the info as expected by the existing phoneapp.<br/>Now the parked_to_alerting member is passed to a phoneapp as received.<br/><br/><!--<br/>phonesig.cpp phonesig_if.h app_reg.cpp app_gui.cpp app_fkey.cpp app_disp.cpp<br/>-->
   
== IP222 IP232 IP241: Force same speed of the switch ports for 1000M/100M scenarios (configuration option added) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84200 84200]
|}
In scenarios with frequent transistions of the attached PC to sleep  renegotiating the link speed may be undesired. For this case the force same speed mechanism can be disabled.<br/><br/>Other changes:<br/>1000M is only changed to 100M if the other port runs at 100M. The previous version changed from 1000M to 100M if the other port runs at 100M or 10M.<br/><br/>The statistics can be collected from the PC port or from the LAN prot or from both.<br/><br/>Packet forwarding on the PC port is disabled if the port is down to avoid misleading collision counter behaviour.<br/><br/><!-- orchid_drv.cpp orchid_drv.h orchid_drv.xsl orchid_drv_s.xsl --><br/><br/>
   
== CDR fixes for external call detection ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84211 84211]
|}
The type="ext" attribute was not set reliably. Additionaly an attribute pseudo was added to the <user/> tag to indicate the type of object the CDRis created for.<br/><!--<br/>pbx_api.h<br/>pbx.cpp<br/>pbx_exec.cpp<br/>pbx_wait.cpp<br/>pbx_bc.cpp<br/>pbx_mobility.cpp<br/>-->
   
== http client : authentication was not retried after a failure when the offending request was repeated in the same session ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84217 84217]
|}
When a httpclient user repeated a failing request in the same session the authentication was not tried again. Thus a change of the client side URL password or a change of the server side password had no effect until a new session was started.<br/><br/><!-- httpclient_i.cpp -->
   
== IP6000: Prevent blinking error LED on old IP6000 with HW-Build &lt;110 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84227 84227]
|}
Conference DSP driver was started on old hardware that doesnt support the conference DSP<br/><!-- adsp2191_drv.cpp -->
   
== IP222 IP232 IP241: pressing speaker key when phone is in handset mode switches to handsfree mode instead to toggle monitor mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84297 84297]
|}
handset/headset plus speaker is not supported<br/><br/><!-- codec.h ac_codec3.h ac_codec3.cpp phonesig_if.h phonesig.h phonesig.cpp app_ctl.cpp -->
   
== myPBX: Inconsistent display of group monitoring rights ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84350 84350]
|}
In the visibility settings groups were not displayed if the membership is "dynamic out". But members of that group still have monitoring rights.<br/><!--<br/>pbx_client.cpp<br/>-->
   
== PBX: Import did not work with some data ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84356 84356]
|}
The data is processed in chunks. If the chunk border was right behind the closing </user> tag, the decoding of the next chunk failed.<br/><!--<br/>pbx_admin.cpp<br/>-->
   
== phone: when scrolling directory search results sometimes one of  the numbers of a contact was not displayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84362 84362]
|}
the tag characters assigned to the different numbers were not included in sort order.
   
== phone: status messages for outbound external calls were sometimes garbled on display ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84365 84365]
|}
happened when for a preceeding outbound internal call in alerting state presence info was displayed<br/><br/><!-- forms.h forms_gen.cpp forms_color.cpp app_ctl.h app_call.cpp app_disp.cpp -->
   
== IP0010: DSP didnt start with build 9061044 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84388 84388]
|}
<!--ac_491.cpp adsp2191:drv.cpp-->
   
== Page Ldap/Replicator/Status didn't display in WebKit ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84400 84400]
|}
Page Ldap/Replicator/Status didn't display in WebKit<br/><!--<br/>ldaprep_status.xsl<br/>-->
   
== phone_orchid: displaying both  dialed and connected number may be misleading, it's better to omit dialed number ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84422 84422]
|}
when for example 022222222 was dialed and the network reported a connected number 03022222222 the display info "022222222 -> 03022222222" looked like a transfer.<br/><br/><!-- forms_color.cpp --><br/> 
   
== Hide LDAP Server Password For Viewer Accounts ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84557 84557]
|}
Was accessible for viewers<br/><!--ldapsrv.cpp<br/>-->
   
== phone: enable directory search function key also in connected state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84559 84559]
|}
it's sometimes useful to browse the directories for a number while talking.<br/><br/><!-- app_fkey.cpp -->
   
== myPBX: Only send one command at a time ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84568 84568]
|}
Queue commands instead of sending overlapping commands. This limits the number of open AJAX connections to two.<br/><!--<br/>client.js<br/>-->
   
== H.323: Accidential fallback to slowstart if faststart response received in PROGRESS ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84601 84601]
|}
Only happened in some H.323/SIP interop scenarios<br/><!--<br/>h323sig.cpp<br/>-->
   
== IP222 IP232 IP241: Updated gain and equalizer setting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84605 84605]
|}
Tuned for high MOS values according to ETSI ES202737 ES202738 ES202739 ES202740<br/><!-- ac_codec3.* platform/filter/* -->
   
== IP0010 IP1060 IP3010 IP6010 IP22 IP24 IP28 IP302 IP305 IP800 IP6000: Minifirmware not shown on LED ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84616 84616]
|}
Minifirmware should blink long green short red. This happened only after a firmware/bootcode update.<br/><br/><!-- ip6010.cpp ip24.cpp ip800.cpp ip6000.cpp-->
   
== phone: ip222, ip232: status stage added to all USB control transfers ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84617 84617]
|}
the status stage is mandatory as well for IN as for OUT control tranfers<br/><br/><!-- ohci.cpp ohci.h ohci_defs.h -->
   
== H.323: More information on "Unexpected Message" event ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84699 84699]
|}
The message type and the state for which this message was unexpected is needed to find out what the problem is.<br/><!--<br/>h323sig.cpp<br/>-->
   
== SIP: Trap during channel handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84800 84800]
|}
Rare trap when re-assigning channels.<br/><br/><!--<br/>sip.cpp/h<br/>medialib.h<br/>-->
   
== IP232,IP222,IP241: Rendering errors when trying to use backround image with indexed colors ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84814 84814]
|}
PNG mode "indexed colors" is not supported.<br/>Trying to use an indexed color png leaves phone screen in bad shape.<br/><br/><!--<br/>read_png.cpp<br/>-->
   
== NAT: Don't forward DNS requests from public network ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84842 84842]
|}
As kind of denial of service attack, bursts of incoming DNS requests were seen. The nat process was forwarding these requests to the public DNS. This is a useful function for DNS requests from the private network, but not for requests from the public network.<br/><br/>These DNS requests are now discarded<br/><!--<br/>socket.h<br/>udp4.cpp<br/>udp.cpp<br/>nat.cpp<br/>-->
   
== H.323: Media Negotiation did not work for call with reverse media and media response in CALL-PROC ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84848 84848]
|}
Caused SIP interop problems with CUCM<br/><!--<br/>h323sig.cpp<br/>-->
   
== Maximum LDAP PDU Size Too Small ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84851 84851]
|}
Maximum LDAP PDU Size Too Small. Now internal maximum allocation unit plus a bit for encoding overhead.<br/><br/><!--<br/>ldapasn1.cpp<br/>-->
   
== PBX Broadcast: Call to group members was not cleared when CFNR was executed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84857 84857]
|}
This was a collateral damage from<br/>fix: #79549: PBX Waiting/Broadcast: Incomplete CDRs if CFNR configured on object<br/><!--<br/>pbx.cpp<br/>-->
   
== IPVA: V10 Code Merge Aiming To Stabilize FW Upload To DRAM ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84862 84862]
|}
Addresses a problem in conjunction with innovaphone's automated test environment<br/><!--<br/>ipva.cpp<br/>vlance_drv.cpp<br/>ide_drv.cpp<br/>-->
   
== PBX: Filters should only be applied to calls with media channels ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84892 84892]
|}
A join group operation could be prohibited with filters. This was unexpected.<br/><!--<br/>pbx.cpp<br/>-->
   
== phone: ip222, ip232: raise alarm if an USB Headset does not respond on USB bus anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84893 84893]
|}
<!-- keys_ip222.cpp, ohci.cpp, ohci.h --><br/>
   
== SIP: Fix for media negotiation on calls re-routed from TONE interface to outbound SIP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84932 84932]
|}
Helps on gateway interfaces configured for media-relay with exclusive codec.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP-DECT: Call transfer timer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84951 84951]
|}
The call transfer timer is stopped with the call proceeding event now. This fixes a call transfer to e.g. a mobile user with a delayed alert.<br/><br/><!--<br/>Changed files:<br/>dectradio_call.cpp<br/>dectradio_mastercall.h<br/>dectradio_mastercall.cpp<br/>-->
   
== IP-DECT: Reverse phone book ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84953 84953]
|}
The reverse phone book does not work till hotfix 11. This is fixed again now.<br/><br/><!-- Changed files:<br/>dectradio.cpp<br/>dectradio_mastercall.cpp<br/>-->
   
== SIP: Loosing remote IP addresses when DNS becomes temorarily unavailable ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84991 84991]
|}
Loosing remote IP addresses when DNS becomes temorarily unavailable.<br/>Results in interfaces without remote ip addresses.<br/><br/><!--<br/>sip.cpp/h<br/>--><br/>
   
== PBX Routing: A CFNR on a slave gateway object redirecting the call to the master failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85017 85017]
|}
This was a collateral damage of<br/><br/>fix: #77874: PBX: Routing problem with nodes/escapes/slaves with calls to object in same node but different PBX<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: Switch to T.38 did not work when interworking with H.323 slowstart (XCAPI) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85047 85047]
|}
Switch to T.38 did not work when interworking with H.323 slowstart (XCAPI).<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP222 IP232 IP241: Headet volume adjust added, re-enable noise reduction in headset mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85058 85058]
|}
Headset volume adjust can be done with the webinterface at<br/> http://addr/dsp.xml<br/><br/>This feature can be used to adapt to different DHSG headsets.<br/><br/>The noise reduction in headset mode is re-enabled to avoid sporadic noise with <br/><br/><!-- ac_phone3.* ac_codec3.* ac_dsp3.mak -->
   
== SIP: Memory leak ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85083 85083]
|}
Memory leak.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Fix for STUN problems ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85118 85118]
|}
Try alternative STUN server address if first fails and another was gathered by DNS.<br/><br/><!--<br/>sip.cpp/h<br/>siptrans.cpp/h<br/>-->
   
== IP232,IP222,IP241: Do not hide configured fkey if neither text nor icon is displayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85211 85211]
|}
Do not hide configured fkey if neither text nor icon is displayed.<br/>E.g. Call Forwarding fkey with CF destination but no label text.<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== PBX: Slave with non-ASCII PBX name did not register at master ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85235 85235]
|}
Error in utf-8 to unicode convertion in this case<br/><!--<br/>pbx.cpp<br/>-->
   
== New remote control codes to be used for phone tests by soap applications ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83468 83468]
|}
The new UserRc codes are executed only when the addressed phone is either in handset, headset or handsfree mode, i.e when calling, connected or disconnected but not when alerting:<br/>16 - change to handset mode<br/>17 - change to headset mode<br/>18 - change to handsfree mode<br/>19 - monitor mode on (add speaker to handset or headset mode)<br/>20 - monitor mode off (back to plain handset or headset mode)<br/><br/><!-- fty.h phonesig_if.cpp phonesig.cpp app_call.cpp -->
   
== Alarm/Event handling: Authentication for received remote Alarms/Events ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83603 83603]
|}
Allow by configuration to only accept authenticated alarms or events<br/><!--<br/>logging.cpp<br/>logging.h<br/>fault_handler.cpp<br/>fault_handler.h<br/>logging.xsl<br/>-->
   
== PBX: Preparations for objects visible only if appropriate license installed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83615 83615]
|}
for v10<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>-->
   
== PBX: New Feature to allow registration with password to devices regardless of address filter ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83794 83794]
|}
It is now possible to configure a flag at a device to allow a registration for this device even if there is an IP Filter which does not match. This is useful if registrations from the public internet to the PBX shall be possible. Without this feature this could be opened only for the complete PBX. Now it can be restricted to a few devices.<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_admin.cpp<br/>pbx_edit_object.xsl<br/>-->
   
== SoftwarePhone: Signature added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=83915 83915]
|}
The SoftwarePhone installer and the install package is signed now.<br/><br/><!--<br/>Changed file:<br/>Makefile<br/>-->
   
== IP-DECT: Phone book 'Use TLS' option ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84001 84001]
|}
'Use TLS' option added for the central phone book search. This changes the standard port from 389 to 636 if no port is configured. The central phone book search is only available with the IP1202.<br/><br/><!--<br/>Changed files:<br/>ascom/phonebook_ldap/config_ldap.h<br/>ascom/phonebook_ldap/config_ldap.cpp<br/>ascom/phonebook_ldap/phonebook_ldap_search.cpp<br/>ascom/phonebook_ldap/phonebook_ldap.xsl<br/>--><br/>
   
== simple static logging interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84204 84204]
|}
to simplify sending of log messages, alarms and errors a simple static interface to the logging module was added. log_if::log(class serial src, const class event &amp; event) passes the given event to the primary logging module (aka LOG0). This works also with 'src' = 0.<br/><br/><!-- log_if.cpp log_if.h logging.cpp http.cpp -->
   
== myPBX: Pass selected device to launcher ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84556 84556]
|}
Needed for version 10 remote video<br/><!--<br/>client.js<br/>client_util.js<br/>-->
   
== SIP: Announcing  "a=T38MaxBitRate:14400" in T.38 offer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84770 84770]
|}
Announcing  "a=T38MaxBitRate:14400" in SDP offer for T.38<br/>since all current devices support that modem speed.
   
== SIP: Set numbering plan to "ISDN/telephony" in case of "Bellcore-dr2" as Alert-Info in INVITE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84939 84939]
|}
Set numbering plan to "ISDN/telephony" in case of "Bellcore-dr2" as Alert-Info in INVITE.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP-DECT: Phone book error events ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85001 85001]
|}
The phone book module sends an error event now if the LDAP directory search fails.<br/><br/><!--<br/>Changed files:<br/>platform/config.h<br/>dect/dectusers_if.h<br/>ascom/phonebook_ldap/phonebook_ldap.h<br/>ascom/phonebook_ldap/phonebook_ldap.cpp<br/>ascom/phonebook_ldap/phonebook_ldap_request.cpp<br/>ascom/phonebook_ldap/phonebook_ldap_search.h<br/>ascom/phonebook_ldap/phonebook_ldap_search.cpp<br/>-->
   
= V9 Hotfix 16 (9.061101) =
Changes included in Version 9 hotfix16<!---->
[http://mantis.innovaphone.com/view.php?id=85032 Definition]
 
 
   
== phone: ip222, ip232: USB Headset could not be disabled via Menu or by Headset Function in Enable mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84444 84444]
|}
sometimes the user want's to use the phone as if no headset is connected, i.e. when for example redial key is pressed after a number has been entered or a list entry has been selected the call should be started in handsfree mode and not in headset mode.<br/>If now the headset is disabled via menu or the headset(enable) function key all headset functions are completely disabled and no calls are directed to the headset, the status bar displays an icon indicating the disabled state.  <br/><br/><!--<br/>phone_user.h<br/>phone_user.cpp<br/>app_ctl.h<br/>app_ctl.cpp<br/>app_disp.cpp<br/>app_form.cpp<br/>app_fkey.cpp<br/>app_gui.cpp<br/>phone_user_if.h <br/>forms.h<br/>forms_color.cpp<br/>icons.mak<br/>headset_disabled.png<br/>ac_codec_3.cpp<br/>--><br/>
   
== H.323: Interop Problem with CUCM SIP for Transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85120 85120]
|}
For the transfer the CUCM first sets the call on hold and then requests a new media proposal from this call, which we cannot deliver. The request is just ignored, there should be an answer.<br/><!--<br/>h323ch.cpp<br/>-->
   
== IP152: Call replacement (blind transfer) did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85313 85313]
|}
Call replacement (blind transfer) ends up in no audio.<br/><br/><!--<br/>coldfire_afe.cpp<br/>-->
   
== Trap when disabling Gateway interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85377 85377]
|}
0:0204:814:3 - SIP_UDP.17 -> SIP_TRANSPORT.1 : SOCKET_RECVFROM_RESULT(87.173.157.2:5060,10.2.2.1:5060;95fd:75c0:9485:bc94:9485:bc30:9406:630c:5060,948a:2198:9476:5924:19:72:0:1:5060)<br/>      data(913),SIP_TRANSPORT<br/>      <br/>\tREGISTER sip:gwdl_ip800 SIP/2.0<br/>\tVia: SIP/2.0/UDP 87.173.157.2:5060;branch=z9hG4bKA072411261DD0135<br/>\tRoute: <sip:87.139.89.223;lr><br/>\tFrom: <sip:93@gwdl_ip800>;tag=4110839322<br/>\tTo: <sip:93@gwdl_ip800><br/>\tCall-ID: DECE171E57A1898F@192.168.178.1<br/>\tCSeq: 7998 REGISTER<br/>\tContact: <sip:93@87.173.157.2;uniq=D526C620EFAB7D1ACBBC469D33242><br/>\tAuthorization: Digest username="_!(schuetz)", realm="gwdl_ip800", nonce="7977d820e909d311", uri="sip:gwdl_ip800", response="6999f52d0e7d4ddbd18b23b59936aaa6", algorithm=MD5, cnonce="F56053DD72D3E1B3", qop=auth, nc=00000401<br/>\tExpires: 1800<br/>\tMax-Forwards: 70<br/>\tUser-Agent: AVM FRITZ!Box Fon WLAN 7112 (UI) 87.04.87 (Jun  7 2011)<br/>\tSupported: 100rel,replaces,timer<br/>\tAllow-Events: telephone-event,refer,reg<br/>\tAllow: INVITE,ACK,OPTIONS,CANCEL,BYE,UPDATE,PRACK,INFO,SUBSCRIBE,NOTIFY,REFER,MESSAGE,PUBLISH<br/>\tAccept: application/sdp, multipart/mixed<br/>\tAccept-Encoding: identity<br/>\tContent-Length: 0<br/><br/><br/>0:0204:815:5 - SIP-Client(SIP-CLIENT.0) <sip:93@gwdl_ip800;user=phone> ...<br/>0:0204:816:5 - SIP-Client(SIP-CLIENT.0) Idle->Registering<br/>0:0204:816:6 - SIP_RAS_APP.3 -> GK.0 : RAS_DISCOVERY, ip=87.173.157.2<br/>      data(6),GK<br/>      00 00 00 02  39 33                                  ....93          <br/>0:0204:816:7 - GK.0 -> SIP_RAS_APP.3 : RAS_DISCOVERY_CONFIRM<br/>0:0204:817:0 - SIP_RAS_APP.3 -> GK.0 : RAS_REGISTRATION(87.173.157.2:5060)<br/>      data(6),GK<br/>      00 00 00 02  39 33                                  ....93          <br/>0:0204:817:1 - GK.0 -> SIP_RAS_APP.3 : RAS_REGISTRATION_CONFIRM <br/>      data(32),SIP_RAS_APP<br/>      00 00 00 02  39 33 00 01  00 16 00 5f  00 21 00 28  ....93....._.!.(<br/>      00 73 00 63  00 68 00 75  00 65 00 74  00 7a 00 29  .s.c.h.u.e.t.z.)<br/>0:0204:817:1 - DEBUG this=948b325c event.sig=0<br/>0:0204:817:2 - DEBUG this->reg_reference=0 event.reference=948b3ebc<br/>
   
== Presence note got lost ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85469 85469]
|}
When configuring a presence on the phone (Main menu/User setup/Presence)<br/>the note is not save along with the selected activity<br/><br/><!--<br/>app_gui.cpp<br/>-->
   
== PBX: Potential trap on registration of a slave PBX, with Master GK-ID configuration changes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85477 85477]
|}
The trap happened if on the Slave a Master GK-ID was configured, then the slave registered, and afterwards the Master GK-ID was removed again and the slave registered again and then was restarted once more.<br/><!--<br/>pbx.cpp<br/>-->
   
== Presence: Note moves into 'tel' presence ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85482 85482]
|}
Presence note moves into 'tel' presence when changing activity by use of 'presence' fkey.<br/><br/><!--<br/>app_disp.cpp<br/>-->
   
== IP232,IP222: Automatically enter input mode 'alpha' when entering directory search screen through fkey ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85493 85493]
|}
Automatically enter input mode 'alpha' when entering directory search screen through fkey.<br/><br/><!--<br/>phone_dir_ui.cpp<br/>forms_color.cpp<br/>-->
   
== SIP: Interop with Genband SBC ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85534 85534]
|}
Handling this kind of SDP offer:<br/><br/>\tv=0<br/>\to=IOTMSX1-0 17 2 IN IP4 206.165.51.38<br/>\ts=sip call<br/>\tc=IN IP4 0.0.0.0<br/>\tt=0 0<br/>\tm=audio 42076 RTP/AVP 0 8 4 18 101 13<br/>\ta=sendonly<br/>\ta=rtpmap:101 telephone-event/8000<br/>\ta=fmtp:18 annexa=yes<br/>\ta=fmtp:18 annexb=no<br/>\ta=fmtp:101 0-15<br/>\ta=ptime:20<br/>\ta=silenceSupp:off - - - -<br/><br/><!--<br/>sip.cpp<br/>--><br/>
   
== PBX-Exec: Call at secretary for executive had wrong destination name/number ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85535 85535]
|}
Call should be displayed as call to the scretary, diverted by the executive<br/><!--<br/>pbxb_exec.cpp<br/>-->
   
== Media: RTP did not work on switch from slowstart T.38 to EFC G.711 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85548 85548]
|}
T.38 retransmission packets were sent, which caused problems with the RTP<br/><!--<br/>media.cpp<br/>-->
   
== IP222 IP232 IP241: DSP Update to Version 680.05 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85552 85552]
|}
Sporadic problems with noise reduction fixed.<br/>Noise reduction can be enabled for Handset/Headset/Handsfree mode<br/><br/><!-- <br/>DSP code details at \\\\innovaphone.sifi\\dfs\\Dokumente\\Hardware\\G7xx\\Audiocodes\\firmware\\firmware_ac49x\\680.05<br/><br/>ac49x_680/* ac_phone3.cpp ac_phone3.h ac_494.cpp ac_494e.cpp ac491.cpp ac_firmware.h phone_orchid.mak phone_dsp.xsl -->
   
== SIP: Providing private RTP address although public RTP address is available ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85751 85751]
|}
During re-negotiation:<br/>Providing private RTP address to external endpoint although public RTP address is available.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Do not send "504 Server Time-out" after "200 OK" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85788 85788]
|}
Do not send "504 Server Time-out" after "200 OK".<br/><br/><!--<br/>siptrans.cpp<br/>-->
   
== IP-DECT: Call transfer compatibility with SIP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85795 85795]
|}
For compatibility reasons with the SIP protocol no hold signal should be sent to the call transfer destination. This is fixed again.<br/><br/><!--<br/>Changed file:<br/>dectradio_call.cpp<br/>-->
   
== SIP: Handling of "sendonly" offer after "inactive" offer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85857 85857]
|}
Switching from "inactive" into "recvonly".<br/>Giving REMOTE_RETRIEVE and HOLD_NOTIFY to app.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Ignore From-URI in re-INVITE and UPDATE when "from-change" not supported ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85873 85873]
|}
Ignore From-URI in re-INVITE and UPDATE when "from-change" not supported by remote side.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Phones: Touching should start dialing of selected directory entry ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85959 85959]
|}
Touching should start dialing of selected directory entry<br/>instead of opening directory entry for editing.<br/>At least in Context of Wahlvorbereitung.
   
== SNMP-Traps: agent-addr wasn't reflecting altered IP adress ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85970 85970]
|}
SNMP-Traps: The SNMP trap's agent-addr member carried an outdated ip adress if the DHCP leased ip address changed.<br/><!--<br/>snmp.cpp<br/>snmp.h<br/>-->
   
== SIP: Optimization when validating local media address ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86029 86029]
|}
Optimization when validating local media address.<br/>Keep number of SOCKET_GET_LOCAL_ADDR low.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== DHCP: client IP connectivity lost when a renew/rebind request for the currently assigned address was refused by the server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86030 86030]
|}
When a client renew/rebind request is refused by the server providing the current address the client starts a new discovery. But in case of success the new address was not set and the client could not be reached anymore.
   
== ENUM: Port in SIP-URI was not honored ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86037 86037]
|}
Port in SIP-URI was not honored in regex of DNS result.<br/><br/><!--<br/>enumlib.cpp/h<br/>relay.cpp<br/>sip.cpp<br/>-->
   
== IP-DECT: Transferred/rerouted call display ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86041 86041]
|}
The remote party number of transferred and rerouted calls are not correctly shown in the handset's display. This fixes the display of CTI initiated calls.<br/><br/><!--<br/>Changed file:<br/>dectradio_call.cpp<br/>-->
   
== IP-DECT: MAC-alias change of OEM device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86047 86047]
|}
The MAC-alias of an OEM device was changed and this results in conflicts within several DECT modules. Different product short names of the same device are correctly accepted now.<br/><br/><!--<br/>Changed files:<br/>dectmaster.h<br/>dectmaster.cpp<br/>cryptomaster.cpp<br/>dectmobmaster.h<br/>dectmobmaster.cpp<br/>cryptomaster_registration.h<br/>registration_context.h<br/>registration_context.cpp<br/>--><br/>
   
== ip1202: Send Inband DTMF did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86052 86052]
|}
the "DECT/Config/Master/Send Inband DTMF" checkmark had no effect.
   
== SIP: Support for multiple audio media descriptions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86083 86083]
|}
One without encryption and one with encryption:<br/><br/>v=0<br/>o=OpenStage-Line_0 968610650 446118927 IN IP4 10.30.1.144<br/>s=SIP Call<br/>c=IN IP4 10.30.1.144<br/>t=0 0<br/>m=audio 5012 RTP/AVP 9 8 0 18 101<br/>a=rtpmap:9 G722/8000<br/>a=rtpmap:8 PCMA/8000<br/>a=rtpmap:0 PCMU/8000<br/>a=rtpmap:18 G729/8000<br/>a=rtpmap:101 telephone-event/8000<br/>a=silenceSupp:off - - - -<br/>a=fmtp:18 annexb=no<br/>a=fmtp:101 0-15<br/>a=sendrecv<br/>m=audio 5010 RTP/SAVP 9 8 0 18 101<br/>a=rtpmap:9 G722/8000<br/>a=rtpmap:8 PCMA/8000<br/>a=rtpmap:0 PCMU/8000<br/>a=rtpmap:18 G729/8000<br/>a=rtpmap:101 telephone-event/8000<br/>a=silenceSupp:off - - - -<br/>a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:ujVU8G6kgknZnPflRwx8tadNskkp9glas/DFCbC3<br/>a=crypto:2 AES_CM_128_HMAC_SHA1_80 inline:+uoFBNVVhDY5OOGvMOdAlvpxvc98hX/VeProhlwH<br/>a=fmtp:18 annexb=no<br/>a=fmtp:101 0-15<br/>a=sendrecv<br/><br/><br/><!--<br/>sip.cpp/h<br/>sdpmsg.cpp/h<br/>-->
   
== Change order of links on debug page ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86121 86121]
|}
Make "Tracing" the first item so that no leak check is triggered when opening the page.<br/><!--<br/>debug.xml<br/>maintenance.xml<br/>-->
   
== Phones: Using config option "CGPN" as CGPN on outbound SIP calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86122 86122]
|}
Using config option "CGPN" as CGPN on outbound SIP calls.<br/><br/><!--<br/>phonesig.cpp<br/>-->
   
== phone: ip222, ip232: recover from USB port failure probably caused by electric sparks ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86125 86125]
|}
An USB port failure is indicated when a Plantronics DA45 headset adapter is plugged and a certain kind of table lamp (halogen) is switched on or off.<br/>It happens independent of current state of the headset (idle or in call)<br/>but only with the abovementioned adapter.<br/>The exact reason is not known yet, may be it's an electric spark from the switch of the lamp or some pulse.<br/>The fix is to reset the port and to restart the plugin process, a possibly active call is terminated.<br/><br/><!-- keys_ip222.cpp ohci.cpp ohci.h ohci_defs.h --> <br/>
   
== phone: coder settings of a "Create Registration"  function key were not applied to the created registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86164 86164]
|}
<!-- app_fkey.cpp -->
   
== Disable leak check if debug flag is not set ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86165 86165]
|}
The leak check is only allowed if the config flag CPU /debug is set.<br/><!--<br/>command.cpp<br/>leaks.xml<br/>-->
   
== AD Replication: Configuration Buffer Increased ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86211 86211]
|}
Was too small for many maps<br/><!--<br/>ldaprep.cpp/.h<br/>-->
   
== whistling tone in all ip28 a/b ports on incoming call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86212 86212]
|}
This phenomena occured after few day uptime after sending CLIP
   
== ip72 firmware did not boot anymore since V9hotfix11 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86246 86246]
|}
<!-- ip220.cpp -->
   
== SIP: Avoid re-configuration of DSP channel when processing re-INVITE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86316 86316]
|}
Fix is required for interop with SIP devices sending re-INVITE for session-refresh,<br/>but incrementing version field in SDP body, altough there is no change in SDP.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== phone: headset function key mode 'control' could be configured via WEB interface only ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86327 86327]
|}
must be possible locally at the phone too<br/><br/><!-- phone_user_func.cpp phonetxt.h phonetxt-utf8.cpp phonetxt-latin1.cpp phonetxt-utf8.base -->
   
== phone: Partner state provided via dialog info was not reset when the subscription call was released  because of network errors ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86330 86330]
|}
<!-- phonesig.cpp app_reg.cpp -->
   
== Gateway: Routing on blind transfer call starts from wrong IF ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86386 86386]
|}
Transfered endpoint was used as source interface on routing.<br/>Better use transfering endpoint as source on routing of (blind) transfer call.<br/>Also transfer-to endpoint missed ctSetup.<br/>Also transfered endpoint missed ctComplete.<br/><br/><!--<br/>relay.cpp<br/>sip.cpp<br/>-->
   
== Linux: Start-up failures ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86399 86399]
|}
Linux start-up is improved. This fixes hanging Linux start-ups caused by compact-flash failures.<br/><br/><!--<br/>Changed files:<br/>ip6010.h<br/>ip6010.cpp<br/>-->
   
== IP-DECT: GUI Master Configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86442 86442]
|}
Disabling LDAP Directory Search fixed for the IP1202.<br/><br/><!--<br/>Changed file:<br/>_inn_asc_dectmaster.xsl<br/>-->
   
== Linux: GUI in viewer mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86455 86455]
|}
The Linux General page is fixed for the viewer only mode.<br/><br/><!--<br/>Changed files:<br/>config_options.cpp<br/>linux.xsl<br/>-->
   
== SIP: PRACK after CANCEL contains bad RAck header value ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86469 86469]
|}
CSeq or original INVITE transaction was damaged.<br/>But only if CANCEL has been sent right before PRACK.<br/>CANCEL is sent before PRACK only if SDP answer of provisional response is invalid.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX: Conference trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86473 86473]
|}
Potential trap in the PBX BC conference object is fixed.<br/><br/><!--<br/>Changed files:<br/>pbx_bc_conf.h<br/>pbx_bc_conf.cpp<br/>-->
   
== SNMP: Obsoleted Enterprise-Specific Trap "innoIsdnFailure" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86513 86513]
|}
This SNMP trap is no longer necessary. Meanwhile it is covered more consistently by "innoDiagAlarm" and "innoDiagAlarmClear".<br/><!--<br/>gk.cpp/.h<br/>-->
   
== Linux: GUI removed from IP1060 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86547 86547]
|}
The IP1060 does not support the Linux Application Platform. The GUI is removed now. Also a trap is fixed, if somebody tries to enable Linux.<br/><br/><!--<br/>Changed files:<br/>linux.xml<br/>ip6010/platform/config.h<br/>ip6010/platform/ip6010.cpp<br/>ip6010/platform/tabs.xml<br/>ip6000/platform/ip6000.cpp<br/>-->
   
== Voicemail: &lt;pbx-disc&gt; failed sometimes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86569 86569]
|}
In case of unconnected calls that were subject of a prior <pbx-fwd><br/><!--<br/>pbx_vm.cpp<br/>-->
   
== phone: ip222, ip232:  handset/handsfree speaker was not switched off when changing over to headset mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86706 86706]
|}
When the headset talk-key or the phone headset-control-key is pressed while the phone is in handset or handsfree mode the phone changes to headset mode, i.e. headset micro and speaker are activated. The handset or handsfree speaker should be switched off then.<br/><br/><!-- ac_codec3.cpp -->
   
== phone_orchid: pressing the speaker key while in headset mode did not switch over to handsfree mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86707 86707]
|}
When the speaker key is pressed while the phone is in headset mode the headset should be deactivated and the phone should enter handsfree mode.<br/><br/><!-- app_ctl.cpp -->
   
== Media: Preparing for G.722.1 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85316 85316]
|}
Decoding SDP containing G.722.1<br/><br/>\tv=0<br/>\to=- 5140 5141 IN IP4 10.138.6.91<br/>\ts=-<br/>\tc=IN IP4 10.138.6.91<br/>\tt=0 0<br/>\tm=audio 50000 RTP/AVP 122 8 0 18 121 101<br/>\ta=rtpmap:122 G7221/16000<br/>\ta=fmtp:122 bitrate=32000<br/>\ta=rtpmap:121 L16/16000<br/>\ta=rtpmap:18 G729/8000<br/>\ta=fmtp:18 annexb=no<br/>\ta=rtpmap:101 telephone-event/8000<br/>\ta=fmtp:101 0-15<br/><br/><!--<br/>channel.cpp/h<br/>sdpmsg.cpp<br/>-->
   
== SIP: New config file option /tls-unchecked ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85449 85449]
|}
New config file option /tls-unchecked disables validation of remote server certificate.<br/><br/><!--<br/>sip.cpp/h<br/>siptrans.cpp<br/>-->
   
== IP-DECT: Configuration changes for OEM device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85522 85522]
|}
For an OEM device the configuration update behaviour is changed.<br/><br/><!--<br/>Changed files:<br/>dectmaster.h<br/>dectmaster.cpp<br/>--><br/>
   
== SIP: New config file option /fixed-contact-addr ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85529 85529]
|}
New config file option /fixed-contact-addr to keep SIP client from changing it's Contact address into public address of NAT mapping after registration.<br/>(RFC-3581 Symmetric Response Routing)<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== IP-DECT: DECT security (3) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85554 85554]
|}
Some changes in preparation for the new feature "DECT security". This feature will be available later (IP1202).<br/><br/><!--<br/>Changed files:<br/>common/interface/signal.h<br/>common/interface/signal.cpp<br/>ascom/mobmaster/cryptomaster.h<br/>ascom/mobmaster/cryptomaster.cpp<br/>ascom/mobmaster/dectmobmaster.h<br/>ascom/mobmaster/dectmobmaster.cpp<br/>dect/master/dectmaster.h<br/>dect/master/dectmaster.cpp<br/>dect/radio/dectradio.h<br/>dect/radio/dectradio.cpp<br/>dect/localusers/dectlocalusers.h<br/>dect/localusers/dectlocalusers.cpp<br/>ascom/httpfiles/asc_dectusers.xsl<br/>ascom/httpfiles/_inn_asc_dectusers.xsl<br/>--><br/>
   
== Phones: New config file option /recording-without-remote-party-info ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85833 85833]
|}
For interop of recording feature with VOXTRON application.<br/>VOXTRON application gets confused by Diversion header in INVITE.<br/><br/>    config change PHONE SIG /recording-without-remote-party-info<br/><br/><!--<br/>phonesig.cpp/h<br/>-->
   
== phone_orchid: configuration prameters to adjust microphone and speaker volume ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85848 85848]
|}
These parameters set a volume correction factor which is applied at any volume level. Parameter changes are applied immediately even in an active call. <br/>  <br/>config add AC-DSP0 HEADSET /mic-volume <mic-adjust> /spk-volume <spk-adjust><br/>config write<br/>config activate<br/><br/>  -20 <= <*-adjust> <= +20<br/><br/> <br/>
   
== IP-DECT: Radio reconnect handling with OEM PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=85952 85952]
|}
The handling for the endpoint location update in combination of a radio reconnect is changed. This fixes the base station behaviour with an OEM PBX.<br/><br/><!--<br/>Changed file:<br/>dectmaster.cpp<br/>-->
   
== ip1202: support capture of raw ethernet packets exchanged between MSP (aka DSP) and the  firmware ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86049 86049]
|}
All exchange between the firmware running on the ACP (Application Command Processor) and the firmware running on the MSP (Media Strem Processor) is in ethernet packet format. The Mindspeed support prefers this trace format.<br/>The capture is enabled via <br/>  config add MSP0 /mtrace<br/>It includes as well command and RTP data packets and thus duplicates the RTP packets traced by the general "All TCP/UDP Traffic" option. 
   
== HTTP-Client: Requests with specified credentials ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86133 86133]
|}
Additional function for OEM httpclient::auth_request<br/>It uses the specified credentials and ignores the username and password from the configuration.<br/><!--<br/>Files:<br/>common/interface/httpclient.h<br/>common/interface/httpclient.cpp<br/>common/protocol/httpclient_i.h<br/>common/protocol/httpclient_i.cpp<br/>common/protocol/httpclient_session.cpp<br/>test/os/test_httpclient.cpp<br/><br/>Tests:<br/>test/10.00/unit-tests/httpclient/authentication/300-get-specified-basicauth.xml<br/>-->
   
== Phones: New config option "Allow User Settings at Phone" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86243 86243]
|}
Allow changing of User Settings even if 'Protect Configuration at Phone' is activated.<br/><br/><!--<br/>phone_protect.xsl<br/>phone_admin_if.h<br/>phone_admin_ui.h<br/>phone_admin_ui.cpp<br/>app_gui.cpp<br/>phone_user_config.cpp<br/>--><br/><br/><!--<br/>See also: http://class.innovaphone.com/moodle2/mod/forum/discuss.php?d=1795<br/>-->
   
== IP-DECT: New hidden Radio option 'Max RTP streams' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86527 86527]
|}
The new hidden option 'Max RTP streams' is added to the IP-DECT Radio module. The option is only visible for an OEM device, but can be used with config change command ("/max-rtp-streams <count>"). The feature is useful to limit the RTP streams for radios connected to the IP-DECT Master with a low data bandwidth. Conference calls are not limited with this feature.
   
== Gateway: New config option "No blind transfer" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86689 86689]
|}
New config option "No blind transfer" to keep Gateway from handling blind transfer requests.<br/>If set blind transfer requests are passed through.<br/>Handling is performed at the next signaling hop.<br/><br/><!--<br/>relay.cpp/h<br/>relay_general.xsl<br/>-->
   
= V9 Hotfix 17 (9061152) =
Changes included in Version 9 hotfix17<!---->
[http://mantis.innovaphone.com/view.php?id=86708 Definition]
 
 
   
== make update script parsing more tolerant to suspicious line ends ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84349 84349]
|}
Some WEBDAV tools garble line end when a text file is stored after editing. Last seen \\r\\r<br/> instead of \\r<br/>. Any sequence consisting only of \\r <br/> chars should be read as one line end because empty lines have no meaning in an update script.<br/><br/><!-- update.cpp update.h --> 
   
== SIP: Do not interwork holdNotific and retrieveNotific while on hold ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86736 86736]
|}
Interworking problem with VOXTRON/XCAPI<br/>Do not interwork holdNotific and retrieveNotific after remoteHold.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Disable LDAP Server When Erasing Flash Directory ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86763 86763]
|}
During an upload of a complete configuration the command "mod cmd FLASHDIR0 erase-all" will erase all flash directory content. Replication clients are going to receive nil-responses making them assume a certain entry does no longer exist.<br/><br/>Replication clients are now barred from accessing the LDAP server as long as the box didn't process the post-upload reset.<br/><!--<br/>interface/ldapapi.h<br/>interface/ldapapi.cpp<br/>service/ldap/ldapsrv.h<br/>service/ldap/ldapsrv.cpp<br/>service/ldap/flashdir.h<br/>service/ldap/flashdir.cpp<br/>--><br/>
   
== IP0010 IP1060 IP3010 IP6010 IP810 IP22 IP24 IP28 IP302 IP305: fax bad signal quality events are sent on good fax connections ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86788 86788]
|}
Sometimes during fax transfer a bad signal quality (e.g.50) is reported, even if the connection is good. This happens during the TCF phase, in the image phase the signal quality is fine ( e.g. 3) <br/><br/><!-- ac_fax3.cpp --><br/>
   
== Mis-typing on Maintenance/Diagnostics/Counters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86812 86812]
|}
Show "kbit/s" instead of "kBbit/s".<br/><br/><!--<br/>log_counter.xsl<br/>-->
   
== Gateway: #11 could not be dialed on analog interfaces with feature codes enabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86819 86819]
|}
This is a featiure code used on DECT systems and it was not disabled on analog interfaces<br/><!--<br/>relayfty.cpp<br/>dtmffty.cpp<br/>-->
   
== Gateway: Potential trap when recording is configured and a transfer happens ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86837 86837]
|}
The problem is with a transfer, which is executed in the Gateway, not the PBX<br/><!--<br/>relay.cpp<br/>-->
   
== PBX: XML Export/Import did not work, if DTMF Feature objects present ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86870 86870]
|}
The automatically generated user objects caused a problem. This could result in a config that caused the PBX to restart in a loop. The export/import was fixed and the PBX does not restart because of the corrupt config any more.<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>pbx_admin.cpp<br/>-->
   
== PBX: Trap if a Hold was attempted for a call without media ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86874 86874]
|}
Could be caused by a misbehaving application or voip device<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX: Name beginning with '*' caused problems with SOAP applications ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86882 86882]
|}
A search for such a name was treated as wildcard search for all users. The name '*' is now a reserved name, which cannot be used for an object.<br/><!--<br/>pbx.cpp<br/>-->
   
== Linux: IP0010 available again ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86903 86903]
|}
With V9 hotfix 16 Linux can not be started on the IP0010. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>linux.cpp<br/>--><br/>
   
== phone: call diversion override via indirect dialing could not be disabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86944 86944]
|}
In the indirect dialing screen the right arrow key opens a menu with different options how to place the call.<br/>"Dial - No Diversion" ssets up a call which will ignore the diversions active on the target phone. This menu item can be supressed via the "Fine grained function locking" bit PHONE_LOCK_DIVERSION_OVERRIDE 0x04000000<br/><br/><!-- phone_dir_ui.cpp phone_config.h -->
   
== PBX Waiting: CFNR with number filter did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86959 86959]
|}
The CFNR was not executed
   
== PBX Conference: Calling Party was missing in the CDRs for calls to conference members ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86977 86977]
|}
Only the conference object itself was present as forwarding party<br/><!--<br/>pbx_bc_conf.cpp<br/>-->
   
== SIP: Rare trap when cancelling call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86994 86994]
|}
When call abort interferes with re-routing in gateway application.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX: Replication from a dyn PBX was not possible ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87065 87065]
|}
Configuration of dyn PBX id now possible for replication<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_general.xml<br/>-->
   
== TLS: Ignore incoming HelloRequest messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87091 87091]
|}
When receiving a HelloRequest the TLS client dopped the connection and sent an "Unexpected message" alert.<br/><br/>Now the HelloRequest is ignored and an "No renegotiation" warning is sent.<br/><br/><!--<br/>tls.cpp<br/>unit-tests/tls/basic/520-data-hellorequest.xml<br/>-->
   
== PBX: Call, which was rejected with busy, because of CF loop, could not be forwarded by Trunk Busy destination ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87150 87150]
|}
Such a call was always disconnected<br/><!--<br/>pbx.cpp<br/>-->
   
== IP0010 IP1060 IP3010 IP6010 IP810 IP22 IP24 IP28 IP302 IP305: DSP Update to Version 680.05 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87179 87179]
|}
The jitter buffer performance has been improved.<br/>The fax/modem bypass performance has been improved.<br/>IP28 firmware size was reduced ( unused code is not linked ).<br/>IP28 G279 didnt work with more than 4 channels.<br/><br/><!-- <br/>DSP code details at \\\\innovaphone.sifi\\dfs\\Dokumente\\Hardware\\G7xx\\Audiocodes\\firmware\\firmware_ac49x\\680.05<br/><br/>ac49x_680/*  ac_494e.cpp ip24.mak ip6010.mak -->
   
== IP222 IP232 IP241: Disable PC port didnt work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87250 87250]
|}
<!-- orchid_drv.cpp -->
   
== IP-DECT: Login feature with disabled local R-key handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87269 87269]
|}
The login feature is fixed now if the local R-key handling is disabled.<br/><br/><!--<br/>Changed file:<br/>dectradio_call.cpp<br/>-->
   
== Webdav: DELETE may fail if file has been opened for reading before ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87288 87288]
|}
If reading (GET) stops but HTTP session remains open, the file remains in state 'open'<br/>and subsequent DELETE request fails with "500 Internal Server Error".<br/>Close file and re-try to delete.<br/><br/><!--<br/>servlet_webdav.cpp/h<br/>-->
   
== HTTP: Chunked transfer fails if the chunk header is not in a single packet ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87292 87292]
|}
<!-- http.cpp -->
   
== PBX: Conference and hanging VM script ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87312 87312]
|}
Wrong media initializing in the BC Conference object causes a hanging VM script if a file should be played. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>pbx_bc_conf.cpp<br/>-->
   
== IP-DECT: No voice with early handover ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87504 87504]
|}
This fixes outgoing calls without voice if early handover is done before the media channel is initialized.<br/><br/><!--<br/>Changed files:<br/>dectmaster.cpp<br/>dectradio_call.cpp<br/>dectradio_dectcall.cpp<br/>--><br/>
   
== phone: ip222, ip232: multiple reports indicating offhook were misinterpreted and could drop a call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87506 87506]
|}
Wireless USB headsets may send more than one report indicating headset offhook state in conjunction with different wireless link states. If the interval between the first and the second indication was very short (8 ms) the second indication was misinterpreted and the just setup call was dropped (observed with a Jabra PRO 930 after plugin).
   
== SIP: Fix for Contact-URI in 200/OK for SUBSCRIBE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87507 87507]
|}
Fix for Contact-URI in 200/OK for SUBSCRIBE and NOTIFY requests.<br/>May contain double port attribue:<br/><br/>SUBSCRIBE sip:8011@172.20.11.53:2053 SIP/2.0<br/><br/>Contact: <sip:8011@172.20.11.53:2053:2053;maddr=172.20.11.53;transport=UDP><br/><br/><!--<br/>sip.cpp<br/>-->
''Status:''
Fixed in 10.00 and 9.00
   
== IP-DECT: Disturbances GUI info change ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87522 87522]
|}
The text of the GUI page disturbances is changed.<br/><br/><!--<br/>New file:<br/>_inn_disturbances.xsl<br/>Changed file:<br/>httpfiles.mak<br/>-->
   
== IP-DECT: Web UI  info page, version and release state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87538 87538]
|}
Now the version and the release state are shown on the web UI info page of the IP1202.<br/><br/><!--<br/>Changed file:<br/>dect_comcerto.cpp<br/>-->
   
== PBX: Blind transfer to WQ by IP-DECT caused hanging calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87542 87542]
|}
The call-leg to the transfering phone was not cleared by the PBX, so if the phone did not clear this call, it was hanging for ever. Other phones clear such a call after a timeout, but this is only a workaround, the call must be cleared by the PBX<br/><!--<br/>pbx.cpp<br/>-->
   
== H.323: Problem sending real big signaling messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87543 87543]
|}
Happened with a configuration with more the 60 Join Group function keys on the phone. The message was not sent and the operation failed.<br/><!--<br/>h323sig.cpp<br/>-->
   
== PBX-SOAP: UserCall on WQ did not take "Send Number" into account and call was not marked as internal ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87559 87559]
|}
Calls should be send with "Send Number" as source if configured<br/><!--<br/>pbx_xml.cpp<br/>-->
   
== PBX: CFB configured at PBX object did not patch number correctly ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87581 87581]
|}
In case the called endpoint was in different node then PBX object, the number did not contain all the needed prefixes<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: Trap when logging out dect user ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87606 87606]
|}
Trap when logging out dect user.<br/><br/>0:0287:977:1 - MASTER_EP-SIG.0 default(948f3e18): serial_event(100) src=DECTMASTER-CALL.0 mod=SIP<br/>0:0287:977:1 - Assertion failed line 790 in common/os/os.cpp, object deleted<br/>0:0287:977:2 - assert-ep 94004474  called from 94055498<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== PBX: Called number was missing in CDRs for calls to busy endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87620 87620]
|}
In case there was no other event then rel-to/from and the call was dialed with overlap sending<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: Handset type information also in Subscribe User-Agent ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87621 87621]
|}
Handset type information also in Subscribe User-Agent as sent in REGISTER request.<br/><br/><!--<br/>siptrans.cpp/h<br/>sip.cpp/h<br/>--><br/>
   
== H.323: Media Negotiation did not work for Hold/Retrieve after a DECT conference ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87635 87635]
|}
No media after retrieve<br/><!--<br/>h323ch.cpp<br/>-->
   
== PBX: Conference trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87662 87662]
|}
A trap in the BC conference PBX object is fixed.<br/><br/><!--<br/>Changed file:<br/>pbx_bc_conf.cpp<br/>-->
   
== PBX Waiting: Missing ringback on call forward after announcement ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87674 87674]
|}
This was a collateral damage of<br/><br/>fix: #81370: PBX Waiting: Call state shows "Disconnecting" after switch from announcement 1 to announcement 2<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== Gateway: Routing on blind transfer call starts from wrong IF (undo of  #86386) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87678 87678]
|}
Rollback of #86386: Gateway: Routing on blind transfer call starts from wrong IF<br/><br/>There are other installations where the old behaviour is the expected behaviour.<br/><br/><!--<br/>relay.cpp<br/>-->
   
== PBX Waiting: DTMF overlap dialing or blind transfer to same Waiting object was rejected with busy ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87681 87681]
|}
Even if this was caused by a CFB or CFU on the dialed destination<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== IP-DECT: No idle display update with own message ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87715 87715]
|}
A message with the same sender and receiver name overwrites the handset's idle display. This feature is removed now.<br/><br/><!--<br/>Changed file:<br/>dect_comcerto/platform/config.h<br/>-->
   
== Voicemail: &lt;pbx-fwd&gt;, Forward Timer Didn't Fire For Connected Calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87717 87717]
|}
Voicemail: <pbx-fwd>, Forward Timer Didn't Fire For Connected Calls<br/><!-<br/>pbx_vm.cpp<br/>-->
   
== IP-DECT: Trap with rejected handovers ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87730 87730]
|}
A trap occurs in the rare situation if the handover is rejected by the radio.<br/><br/><!--<br/>Changed file:<br/>dectradio.cpp<br/>-->
   
== H.323: Q.931 User Info could not be sent in incoming call proceeding state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87740 87740]
|}
This is used by the Fax interface<br/><!--<br/>h323_tbl.tbl<br/>-->
   
== SIP: Parsing of multiple Allow lines was not implemented ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87753 87753]
|}
Now all Allow lines are parsed (not only first one).<br/><br/><!--<br/>sipmsg.cpp/h<br/>-->
   
== syslog packets were sent with the initially assigned source address even after a new address had been assigned ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87754 87754]
|}
When a device runs as DHCP client the IP-adress assigned to an interface may change either because the DHCP-Server rejects a renew request and provides a new lease or because a WLAN device enters another network.<br/>An IP-address change may also happen when the DHCP mode of a device is changed from 'disabled' to 'client' without reboot.<br/>The source address of syslog packets does reflect such changes now. <br/><br/><!-- logging.cpp logging.h -->  <br/>
   
== Linux: Trap of IP810 if Linux is started ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87763 87763]
|}
The IP810 with the V9 hotfix 16 firmware traps if Linux is started. Please do not use this firmware. It is fixed again now.<br/><br/><!--<br/>Changed file:<br/>config.h<br/>-->
   
== PBX: CFNR to same node but different PBX failed on Slave ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87772 87772]
|}
The PBX routing did not work correctly in this case<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX administration: Viewer could change phone configuration of users ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87774 87774]
|}
<!-- pbx_phone.cpp pbx_phone.h -->
   
== SIP: Don't try to dns-resolve IP adresses ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87781 87781]
|}
Don't try to dns-resolve IP adresses.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: Function key options which need to be enabled in Phone/Userx/Preferences could be edited on phone although disabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87792 87792]
|}
Partner-Intrude: hide when "Phone/Userx/Preferences/Enable Call Intrusion" is not checked  <br/>Dial-Announce: hide when "Phone/Userx/Preferences/Announcement Calls/Outgoing/Allow" is not checked<br/><br/><!-- phone_user_func.cpp phone_user_config.h --><br/>
   
== SIP: Error handling huge INVITE requests ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87811 87811]
|}
Failed to compose provisional and final response.<br/>Lots of error messages in trace and truncated responses.<br/><br/>  ERROR: SIP message buffer (2049) exceeded! (40,35,941b0c90)<br/><br/><!--<br/>siptrans.cpp<br/>-->
   
== Gateway: MOH from call on hold in CONF interface calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87823 87823]
|}
If a new call joins the conference or a call on hold retrieves the conference, and there are calls on hold in the conference, the music on hold can be heard in the new or retrieving calls. Now this is fixed.<br/>This affects all devices with a CONF interface, but not the IP800 and the IP305.<br/><br/><!--<br/>Changed files:<br/>adsp2191_drv.h<br/>adsp2191_drv.cpp<br/>-->
   
== IP241,IP222,IP232: Presence note may is not enough truncated on 'presence' fkey ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87825 87825]
|}
Presence note may is not enough truncated on 'presence' fkey.<br/>Esp. when there's also an icon to be displayed.<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== PBX Trunk: If a call was forked to a trunk with no-name option, name was removed from the original call as well ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87843 87843]
|}
A global flag was set on the incoming call, which was wrong.<br/><!--<br/>pbx_trunk.cpp<br/>-->
   
== IP230 IP240: Handset receiver volume increased ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87878 87878]
|}
receiver volume adapted to changed equalizer settings from fix #80403<br/><br/><!-- inca_afe.cpp --> <br/>
   
== phone: ip222, ip232: better handling of spurios headset disconnects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87908 87908]
|}
Sometimes USB headsets get disconnected from USB port because of certain electric pulses. To overcome this problem the headset port is reset and the media stream routed to the handset. If the headset comes up (logical plugged) again in a reasonable time the media stream is routed to the headset again. Otherwise the media stream remains on the handset and the call can be continued by taking off the handset.<br/><br/><!-- keys_ip222.cpp ohci.cpp --><br/>
   
== PBX Trunk: Diverting as Calling Feature should replace the name as well ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87913 87913]
|}
With this feature the Trunk object uses a Diverting Number as calling party number. But not only the number, but also the Name and Name Id should be replaced<br/><!--<br/>pbx_trunk.cpp<br/>pbx.cpp<br/>-->
   
== Phones: Allow lcd_dump.bmp to be retrieved with viewer credentials ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87945 87945]
|}
Allow lcd_dump.bmp to be retrieved with viewer credentials.<br/><br/><!--<br/>lcd_dump.bmp<br/>--><br/>
   
== IP-DECT: Wrong radio list after MAC-alias change ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87950 87950]
|}
The radio list can be wrong after the MAC-alias change. This fixes a bug of the feature "MAC-alias change of OEM device" (#86047). This is only relevant for OEM devices.<br/><br/><!--<br/>Changed file:<br/>dectmaster.cpp<br/>-->
   
== SIP: Keep Contact-URI when registering via TCP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87969 87969]
|}
Keep Contact-URI when registering via TCP, even if rport is present in 200/OK for REGISTER<br/><br/><!--<br/>sip.cpp<br/>--><br/>
   
== PBX-SOAP: UserCall with 'cn' as destination to a user in different node did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88008 88008]
|}
The call is done using the number, but the number needs to be adjusted according to the nodes<br/><!--<br/>pbx_xml.cpp<br/>-->
   
== OS: Quota mechanism did not work for CPU time consumed by timer handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88034 88034]
|}
This could result in a MAX_BUSY_TICK restart if many timer expired at the same time<br/><!--<br/>os.cpp<br/>command.cpp (for test only)<br/>command.h (for test only)<br/>-->
   
== HTTP: Chunked transfer sporadic fails with webdav ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88078 88078]
|}
<!-- http.cpp -->
   
== IP6000 IP2000: Webinterface for ETH1 Link setting didnt work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88137 88137]
|}
..<br/><!-- interfaces.xml -->
   
== SIP: Decoding problem on application/simple-message-summary ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88188 88188]
|}
application/simple-message-summary may get decoded wrongly.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Voicemail: Possibility To Switch Off An Internal Automatism ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88246 88246]
|}
An internal automatism could lead to VM-calls getting disconnected after 15s.<br/>The new URI variable "$_divconn=false" turns off auto-connection for diverted/transferred calls:<br/>http://wiki.innovaphone.com/index.php?title=Howto:Configure_the_innovaphone_Voicemail#URL_Query_String_Variables<br/><!--<br/>pbx_vm.cpp/h<br/>-->
   
== SIP: DNS priority value not honored always ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88248 88248]
|}
DNS priority value not honored, if SRV query returns names without address in additional records.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Do not take "9564+4631559300" as E.164 number ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88254 88254]
|}
Do not take "9564+4631559300" as E.164 number.<br/><br/><!--<br/>sip.cpp<br/>siputil.cpp/h<br/>-->
   
== PBX Boolean: Unpredictable behaviour if more the 16 times are entered ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88263 88263]
|}
There was a limit of 16 times, which was not checked everywhere. The limit is now 32 and checked, so that no more of 32 times can be entered.<br/><!--<br/>pbx_bool.cpp<br/>pbx_bool.h<br/>-->
   
== IP222 IP232 IP241: Restart on Jitter buffer overrun ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88312 88312]
|}
..<br/><!-- ac494e.cpp -->
   
== SIP: Fix for auto-answer handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88334 88334]
|}
Fix for auto-answer handling.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP-DECT: SIP/Intop - rejected call transfer by target ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88356 88356]
|}
If the call transfer target rejects the call in ringing state, no fall-back to the initiator call is done and it is not released. This is fixed now. It is only important for a third party PBX.<br/><br/><!--<br/>Changed files:<br/>dectradio_call.cpp<br/>dectradio_mastercall.h<br/>dectradio_mastercall.cpp<br/>-->
   
== H.323: Problem with Media Re-Negotiation on a DECT handover call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88379 88379]
|}
The DECT handover call works a little special concerning media renegotiation in a way that local preferences are never honored (the real media negotiation takes place between the original radio and the remote endpoint, the handover radio is just told the result. This special mode did not work correctly<br/><!--<br/>h323ch.cpp<br/>dectradio_ho_out.cpp<br/>dectradio_ho_out.h<br/>-->
   
== PBX Waiting: User Information Message from announcement interface accidentally forwarded to caller ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88426 88426]
|}
The announcement interface uses User Information signaling messages to send status information for example at the end of the announcement. This was forwarded to the caller by accident. Usually this does not do any harm, but on some ISDN networks it could result in clearing of the call because of unexpected message.<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== H.323: Potential Max-Busy-Ticks restart ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88441 88441]
|}
The H.323 state machine could enter a endless loop<br/><!--<br/>h323sig.cpp<br/>-->
   
== IP-DECT: No media after conference and toggled to held call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88442 88442]
|}
If the DECT user leaves the conference mode and toggles to an held call, there is no voice. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>decradio_mastercall.h<br/>decradio_mastercall.cpp<br/>-->
   
== Admin IP: static routes configured at an ETH interface disappear when NAT or VLAN config of this interface is updated ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88451 88451]
|}
Routes configured under "IP4/ETHn/IP/Static IP Routes" were cleared when the "IP4/ETHn/NAT" page or the "ETHn/VLAN" page was left by pressing "OK".<br/><br/><!-- ip_ethif_nat.xsl ip_ethif_vlan.xsl --> 
   
== IP232,IP222,IP241: Reduce memory requirements of display rendering ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88485 88485]
|}
Reduce memory requirements of display rendering.<br/><br/><!--<br/>lcd_map.cpp/h<br/>forms_color.cpp/h<br/>read_png.cpp<br/>-->
   
== PBX: Call Completion monitoring call should be terminated only after the CC ringout call is alerting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88489 88489]
|}
This is needed for QSIG interoperability<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>-->
   
== Viewer was able to download config with standard password ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88503 88503]
|}
This was a security hole<br/><!--<br/>cfg-standard.txt<br/>-->
   
== Gateway: Hanging calls in state "Clearing" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88527 88527]
|}
Hanging calls in state "Clearing".<br/>Caused by failed call replacement.<br/><br/><!--<br/>relay.cpp<br/>-->
   
== IP-DECT: Potential buffer overrun ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88535 88535]
|}
Buffer overrun check added in dectusers module for command 'show'.<br/><br/><!--<br/>Changed file:<br/>dectusers.cpp<br/>-->
   
== SIP: Missing UPDATE on call pickup ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88550 88550]
|}
The caller does not received UPDATE containing the connected party information.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Handle one way of DTMF only ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88572 88572]
|}
Handle DTMF received via signaling message (INFO)<br/>or DTMF received via RTP (tlephone-event).<br/>Not both at the same call.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== PBX Conference: No Media in case media offer only received with alert/connect from called member ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88590 88590]
|}
This could happen if a broadcast object was called by a conference<br/><!--<br/>pbx_bc_conf.cpp<br/>-->
   
== IP222 IP232 IP241: Adjust equalizer above 6.3Khz for lower noise level ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88658 88658]
|}
to reduce noise with G722 codec<br/><br/><!-- ac_codec3.cpp platform/filter --><br/>
   
== SIP: Memory leak ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88688 88688]
|}
Memory leak on postponed RETRIEVE_NOTIFY.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Invalid SDP answer if SDP offer contains RED ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88700 88700]
|}
Invalid SDP answer if SDP offer contains RED.<br/>Only on local media.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Voicemail: &lt;pbx-query-obj type="filter"/&gt; couldn't read template distributed filter ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86459 86459]
|}
Switched to a different internal api method<br/><!--<br/>shelved:<br/>pbx_vm.cpp<br/>-->
   
== AD Replication: Refactoring Poll-Timer-based Replication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86476 86476]
|}
-Ridded usnChanged filter term<br/>-Added two status messages<br/><!--<br/>adrep.cpp<br/>-->
   
== PBX Mobility: Take precaution against hanging calls because of misbehaving mobile phone or client ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86813 86813]
|}
Use a 20s timer to terminate any call to the mobility object if no internal call is initiated<br/><!--<br/>pbx_mobility.cpp<br/>pbx_mobility.h<br/>-->
   
== IPVA: Query Physical Link Status. ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86937 86937]
|}
-The physical link status wasn't evaluated so far. Now it is.<br/>-Added statistics page 'Interfaces/EthX/Statistics'<br/><!--<br/>vlance/vlance_drv.cpp<br/>vlance/vlance_drv_s.xls<br/>platform/interfaces.xml<br/>--><br/>
   
== IP TOS value is now traced with Wireshark ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87025 87025]
|}
This value is now correctly traced within IP4 UDP/TCP traces.<br/><br/><!--<br/>debug.cpp/h<br/>ip_user.cpp/h<br/>tcp.cpp/h<br/>udp.cpp/h<br/>ip4_user.h<br/>ipproc.cpp/h<br/>tcp4.cpp/h<br/>udp4.cpp/h<br/>ip6_icmpsock.cpp/h<br/>test_debug.cpp/h<br/>test_tcp.cpp/h<br/>test_udp.cpp/h<br/>-->
   
== PBX Trunk: New destination for rejected calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87151 87151]
|}
Calls which are rejected (busy after alert), can be redirected to a configurable destination.<br/><!--<br/>pbx_trunk.cpp<br/>pbx_trunk.h<br/>pbx_edit_trunk.xsl<br/>-->
   
== SIP: Offer media encryption as separate media description ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87152 87152]
|}
Interop issue.<br/>New config file option "config change SIP /separate-encryption".<br/><br/>Offer:<br/>\tv=0<br/>\to=- 10 1 IN IP4 172.16.16.156<br/>\ts=-<br/>\tc=IN IP4 172.16.16.156<br/>\tt=0 0<br/>\tm=audio 16390 RTP/AVP 9 8 0 18 101 13<br/>\tc=IN IP4 172.16.16.156<br/>\ta=rtpmap:101 telephone-event/8000<br/>\ta=fmtp:18 annexa=yes<br/>\ta=fmtp:18 annexb=no<br/>\ta=fmtp:101 0-15<br/>\ta=ptime:30<br/>\ta=silenceSupp:off - - - -<br/>\ta=sendrecv<br/>\tm=audio 16390 RTP/SAVP 9 8 0 18 101 13<br/>\tc=IN IP4 172.16.16.156<br/>\ta=rtpmap:101 telephone-event/8000<br/>\ta=fmtp:18 annexa=yes<br/>\ta=fmtp:18 annexb=no<br/>\ta=fmtp:101 0-15<br/>\ta=ptime:30<br/>\ta=silenceSupp:off - - - -<br/>\ta=sendrecv<br/>\ta=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:VoGZgKwImVwTkJg4jBeYFBafl/CyJpfMX66WqDMZ<br/><br/>Instead of:<br/>\tv=0<br/>\to=- 9 1 IN IP4 172.16.16.156<br/>\ts=-<br/>\tc=IN IP4 172.16.16.156<br/>\tt=0 0<br/>\tm=audio 16386 RTP/SAVP 9 8 0 18 101 13<br/>\tc=IN IP4 172.16.16.156<br/>\ta=rtpmap:101 telephone-event/8000<br/>\ta=fmtp:18 annexa=yes<br/>\ta=fmtp:18 annexb=no<br/>\ta=fmtp:101 0-15<br/>\ta=ptime:30<br/>\ta=silenceSupp:off - - - -<br/>\ta=sendrecv<br/>\ta=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:mDPFKhNdhm6fhkeyPbAI9uzZyTmtA4t9fy1MwXiD<br/><br/><br/><!--<br/>sip.ccp/h<br/>-->
   
== IP-DECT: DECT security (4) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87157 87157]
|}
Some changes in preparation for the new feature "DECT security". This feature will be available later (IP1202).<br/><br/><!--<br/>Changed file:<br/>dectusers.cpp<br/>-->
   
== SIP: Do registration refresh more ahead of expiration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87381 87381]
|}
Instead of refreshing 2 secs before registration expiration,<br/>do the refresh after 98,33% of the registration ttl.<br/><br/>TTL=120secs -> Refresh 2secs before expiration<br/>TTL=3600secs -> Refresh 60secs before expiration<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone:  Modification of function key on phone can be disabled for any single key ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87405 87405]
|}
A "Disable Modification on Phone" checkmark will be provided in the edit menu for  each key. If checked the key cannot be edited on the phone anymore.<br/>This mechanism works in addition to the phone local key type mask set via<br/>    "Phone/Protect/Function keys not modifiable on the phone"<br/>A key of a type NOT marked as ``not editableïï in this mask can be made ``not editableïï by setting the above mentioned checkmark<br/>A key of a type marked as ``not editableïï remmains not editable, independent of the checkmark setting.<br/><br/><!-- phone_config.cpp phone_config.h phone_edit.cpp phone_user_func.cpp fkey_edit_*.xsl --><br/><br/>
   
== phone:  "Spare" function key to reserve key positions for administrative purposes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87406 87406]
|}
This new key permits to reserve key positions for later definition by administrator.<br/><br/><!-- phone.mak phone_config.h phone_config.cpp phone_edit.cpp fkey_edit_spare.xsl app_disp.cpp app_fkey.cpp phone_user_func.cpp phone_strings_utf8.h phone_strings_latin1.h phone_text_tables.h -->
   
== IP-DECT: Remote hold in conference mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87487 87487]
|}
If a hold notify message is received from a remote party and the conference mode is active, now the message is forwarded to the conference unit. This prevents the music on hold in conference calls. The state is also shown in the radio call list.<br/><br/><!--<br/>Changed files:<br/>dectradio_mastercall.h<br/>dectradio_mastercall.cpp<br/>dectradio_calls.xsl<br/>--><br/>
   
== Webdav: Write information into trace if DELETE fails because file is in open state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87488 87488]
|}
Write information about Webdav session holding open file handle.<br/><br/><!--<br/>http.h<br/>servlet.h<br/>servlet_webdav.cpp/h<br/>-->
   
== H.323: Better error handling in case of incompatible SRTP parameters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87624 87624]
|}
Was needed for DECT OEM.<br/><!--<br/>h323ch.cpp<br/>-->
   
== PBX: No CDR was generated for enblock call, which was rejected because of filter config ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87869 87869]
|}
A CDR with cause 52 (outgoing call barred) is generated<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>-->
   
== Voicemail: Add &lt;pbx-getcallinfo out-leg2-orig="..."&gt; ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87880 87880]
|}
Allows to query the divertingLegInformation2.orignalCalled number
   
== IP-DECT: Fault logging for Master module ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88005 88005]
|}
Call and channel fault logging for the IP-DECT Master module are added.<br/><br/><!--<br/>Changed files:<br/>signal.h<br/>signal.cpp<br/>log_if.h<br/>log_if.cpp<br/>dectmaster.h<br/>dectmaster.cpp<br/>fault_dect.xsl<br/>-->
   
== Voicemail: &lt;pbx-prepcallinfo leg2=".." leg2-name=".."/&gt; ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88351 88351]
|}
New attributes allow to prepare <pbx-fwd> in such, that the supplementary service divertingLegInformation2 is going to be sent.
   
== PBX: Allow configuration of default presence/dialog-info visibility for group members ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88352 88352]
|}
Active group members got full presence/dialog-info because this matched the visibility be group-indications. However this is not desired always, so it can now be configured to restrict this.<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_general.xsl<br/>config_options.cpp<br/>config_options.h<br/>-->
   
== IP-DECT: Unused OEM modules removed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88413 88413]
|}
Unused OEM modules has been removed now.<br/><br/><!--<br/>Changed files:<br/>config.h<br/>dect.cpp<br/>-->
   
== Gateway: Make interop flag "Ack incoming call" configurable on UI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88499 88499]
|}
This was a hidden interop flag, but was now needed multiple times, so it is more efficient to have it configurable on the UI<br/><!--<br/>gk.cpp<br/>gk.h<br/>relay_edit_phys.xsl<br/>-->
   
== IP-DECT: Logging for handover calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88536 88536]
|}
Logging events for IP-DECT handover calls added.<br/><br/><!--<br/>Changed files:<br/>dectradio_call.h<br/>dectradio_call.cpp<br/>dectradio_mastercall.h<br/>dectradio_dectcall.h<br/>dectradio_dectcall.cpp<br/>dectradio_handover_out.h<br/>dectradio_handover_out.cpp<br/>dectradio_handover_in.cpp<br/>-->
   
= V9 Hotfix 18 (9061158) =
Changes included in Version 9 hotfix18<!---->
[http://mantis.innovaphone.com/view.php?id=88994 Definition]
 
 
   
== TLS: Do not ignore early SOCKET_RECV ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88668 88668]
|}
Allow SOCKET_RECV from application between SOCKET_CONNECT and SOCKET_CONNECT_COMPLETE. This event flow is used by the HTTP client.<br/><!--<br/>tls.cpp<br/>unit-tests/tls/basic/102-handshake-client-normal-early-recv<br/>--><br/>
   
== Kerberos: Admin UI trap when having too many Kerberos hosts ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88698 88698]
|}
The problem occured if many Kerberos hosts (~1000) were registered on the server. In this case the box trapped due to an XML encoding problem when opening the page General/Kerberos or PBX/Config/Security.<br/><!--<br/>kerberos_db.cpp<br/>kerberos_ldap.cpp<br/>-->
   
== SIP: Provide display name in 200/OK for SUBSCRIBE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88764 88764]
|}
Add display name to To header in 200/OK for SUBSCRIBE.<br/><br/><!--<br/>sip.cpp/h<br/>sipmsg.cpp/h<br/>siptrans.h<br/>-->
   
== IP22 IP24 IP28 IP305: Sometimes the DSP stops after sending CLIP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89130 89130]
|}
..<br/><!-- ac_494e.cpp ac494004ce3_680.00.pf.01.h ac498004ce1_680.00.pf.01.h -->
   
== PBX: Configuration UI broken for checkmarks on PBX/Config/General and PBX/Config/myPBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89140 89140]
|}
The checkmarks on these two pages where all cleared when the other page was edited.<br/>Collateral damage of<br/><br/>fix: #88352: PBX: Allow configuration of default presence/dialog-info visibility for group members<br/><!--<br/>config_options.cpp<br/>pbx_general.xsl<br/>-->
   
== phone: ip222,ip232: the destination of an acticve diversion was not saved when the diversion was deactivated at  phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89177 89177]
|}
The destination (name or number) disappered when the diversion was deactivated. It was also not visible via the WEB interface.<br/><br/><!-- app_gui.cpp -->
   
== Gateway: Missed FAX pages received with the FAX interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89587 89587]
|}
If the FAX interface is used to receive a FAX document with ECM mode and the transmitting terminal appends additional EOLs, the page counter is wrong and document pages are not written. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>t30.cpp<br/>facsimile_g3.h<br/>facsimile_g3.cpp<br/>facsimile_ECM.h<br/>facsimile_ECM.cpp<br/>-->
   
== IPVA: Enhancement for innovaphone testbed: Indicate whether Upload to DRAM took place ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88223 88223]
|}
Required for innovaphones' automated testbed<br/><!--<br/>ipva.cpp<br/>-->
   
== Announcement Calls with DTMF feature code object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88643 88643]
|}
A new DTMF feature code allows to make announcement calls to a dialed number.<br/><br/><!--<br/>pbx_dtmf.cpp<br/>pbx_dtmf.h<br/>pbx_edit_dtmf-ctrl.xsl<br/>-->
   
== Alarm and Event forwarding to a SYSLOG server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88659 88659]
|}
If "Services/Logging/Alarm and Event Forward Server/Type" is set to SYSLOG the xml-formatted alarm and event info is sent to the Server(s) specified under "Services/Logging/Alarm and Event Forward Server/Address".<br/><br/><!-- logging.cpp logging.h logging.xsl fault_handler.cpp fault_handler.h --><br/>
   
= V9 Hotfix 19 (9061180) =
Changes included in Version 9 hotfix19<!---->
[http://mantis.innovaphone.com/view.php?id=89318 Definition]
 
 
   
== SIP/TLS: Rejecting server certificate ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88444 88444]
|}
Validating server certificate against configured domain name.<br/>Must be validated against configured proxy domsina name.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== SIP: Wrong branch value in Via header in ACK request ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89317 89317]
|}
Branch value in Via header in ACK request must be new after 200 response.<br/>Branch value in Via header in ACK request must be same after non-200 response.<br/><br/><!--<br/>siptrans.cpp/h<br/>-->
   
== H.323: RTP-DTMF did not work on exclusive coder/media relay configurations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89328 89328]
|}
Problem for DTMF on SIP trunks<br/><!--<br/>h323ch.cpp<br/>-->
   
== Voicemail: &lt;pbx-getcallinfo out-confid="..."&gt;, pass conference guid into a script ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89332 89332]
|}
In order to allow correlation of CDRs to voicemail-recorded files
   
== AD Replication: A Buffer for Processing The Paged Result Cookie Was Too Small ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89385 89385]
|}
1KB wasn't enough, now 2KB.<br/><!--<br/>interface/ldapapi.cpp/.h<br/>-->
   
== LDAP Expert: "Next"-Browsing through DB failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89391 89391]
|}
URI encoding error<br/><!--<br/>fdirui_right.xsl<br/>-->
   
== phone: ip222, ip232,ip241:  the notification tone indicating a new message when a call is active was sent to remote ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89392 89392]
|}
instead to notify the receiver of the message the remot party did hear the tone<br/><br/><!-- phonesig.cpp app_call.cpp -->
   
== SIP: "Supported: timer" missing in UPDATE message ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89429 89429]
|}
"Supported: timer" missing in UPDATE message.<br/><br/><!--<br/>sip.cpp/h<br/>siptrans.cpp/h<br/>-->
   
== phone: ip222,ip232: humming noise in USB headset speaker in outbound call setup phase, disappears once connected ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89432 89432]
|}
sometimes a humming noise was heard in the USB headset speaker in the setup phase of an outbound call. it disappeared as soon as the call was connected.  <br/><!-- ac_phone3.cpp -->
   
== phone:  an intrusion call set up via Partner function key could not be cleared at the intruding phone via TAPI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89443 89443]
|}
The TAPI interpreted the recording state as a conference<br/><br/><!-- app_call.cpp -->
   
== log message forwarding to another innovaphone device did not work since V9hotfix15 (on the receiving device) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89492 89492]
|}
this problem is located on the reciving device, it does not depend on the the version of the forwarding device.<br/><br/><!-- logging.cpp logging.h -->
   
== IP22 IP24 IP28 IP305: DSP debug code added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89493 89493]
|}
..<br/><!-- ac_494.cpp -->
   
== PBX Mobility: Conference ID not set for outgoing calls initiated by myPBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89502 89502]
|}
This could cause several problems:<br/>- When the call was sent to a local user with multiple registrations, the call to each registration had a different conferenceID, so myPBX could not match these calls to actually being only a single call, so multiple calls were dissplayed<br/>- The CDRs created for this call could not be matched
   
== SIP: Don't tell application that registration is down when handling redirect response ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89582 89582]
|}
Don't tell application that registration is down when handling redirect response for REGISTER.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: No T.38  parameter when indicating capabilitity only ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89617 89617]
|}
No T.38  parameter when indicating capabilitity only.<br/><br/>Offer<br/>\tv=0<br/>\to=- 2 1 IN IP4 172.16.16.124<br/>\ts=-<br/>\tt=0 0<br/>\tm=audio 16386 RTP/SAVP 8 101 13<br/>\tc=IN IP4 172.16.16.124<br/>\ta=rtpmap:101 telephone-event/8000<br/>\ta=fmtp:101 0-15<br/>\ta=ptime:20<br/>\ta=silenceSupp:off - - - -<br/>\ta=sendrecv<br/>\ta=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:WJl714I+mpSr47ld1YjYMf8t9xQo0xYHUng1CnDi<br/>\tm=image 0 udptl t38<br/>\tc=IN IP4 172.16.16.124<br/><br/>Instead of<br/>\tv=0<br/>\to=- 2 1 IN IP4 172.16.16.124<br/>\ts=-<br/>\tt=0 0<br/>\tm=audio 16394 RTP/SAVP 8 101 13<br/>\tc=IN IP4 172.16.16.124<br/>\ta=rtpmap:101 telephone-event/8000<br/>\ta=fmtp:101 0-15<br/>\ta=ptime:20<br/>\ta=silenceSupp:off - - - -<br/>\ta=sendrecv<br/>\ta=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:sPngj1zoO9wI1pc1tMTymWCzTgwMoamPuJAFIhga<br/>\tm=image 0 udptl t38<br/>\tc=IN IP4 172.16.16.124<br/>\ta=T38FaxVersion:0<br/>\ta=T38MaxBitRate:14400<br/>\ta=T38FaxFillBitRemoval:0<br/>\ta=T38FaxTranscodingMMR:0<br/>\ta=T38FaxTranscodingJBIG:0<br/>\ta=T38FaxRateManagement:transferredTCF<br/>\ta=T38FaxUdpEC:t38UDPRedundancy<br/><br/><br/><!--<br/>sdpmsg.cpp<br/>-->
   
== OS: Potential trap when starting a timer, which is already deleted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89628 89628]
|}
Could result in a strange trap with PBX transfer/recall
   
== phone:  while recording was running for a call this call ould not be cleared via SOAP/TAPI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89629 89629]
|}
The TAPI assumed the intruding phone to be in a conference<br/><br/><!-- app_call.cpp -->
   
== PBX Admin UI: Reconfiguring user visibility (Access) did not work correctly ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89636 89636]
|}
If a setting for a user/group was deleted, it could happen that some of the settings (Group, Online, Presence, Dialog, Ids) where copied to the next entry.<br/><!--<br/>pbx_admin.cpp<br/>-->
   
== Voicemail: Trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89648 89648]
|}
If Trace-Checkmark activated, a diverted call carrying an mwi interrogate was processed<br/><!--<br/>pbx_vm.cpp<br/>-->
   
== Possible Trap While Getting Post-Mortem Log ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89652 89652]
|}
Possible Trap While Getting Post-Mortem Log<br/><!--<br/>httpclient.cpp<br/>signal.cpp<br/>-->
   
== Media: Redirecting SRTP streams for NAT clients only after successful SRTP authentication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89661 89661]
|}
Media endpoints support NAT.<br/>If receiving RTP/SRTP from an address other than negotiated one<br/>media endpoints redirecting their media stream towards source of incoming media stream.<br/>In case of SRTP, this NAT workaround is only executed if incoming media stream has passed authentication.<br/>For securitiy reasons.<br/><br/><!--<br/>media.cpp<br/>-->
   
== AD Replication: Merge v10 code into v9 code ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89671 89671]
|}
Some recent refactoring works weren't in sync. A state machine didn't reach "Completed".<br/><!--<br/>service/ldap/<br/>-->
   
== phone: if a call ringing while the handset was offhook was accepted via SOAP/TAPI the call was not cleared when going onhook ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89680 89680]
|}
This could happen when the handset was lifted and kept lifted after the disconnect key was prressed. an inbound call arriving in this state could be accepted via SOAP/TAPI and was connected to the handset but the call could not be cleared by going onhook. Only the disconnect key did clear the call.  <br/>Now the call is cleared as expected when going onhook.   
   
== phone_orchid: pressing speaker key in handset/headset mode switches to handsfree mode, pressing again returns to previous mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89730 89730]
|}
handset/headset plus speaker is not supported on phone_orchid, the previous solution where the connection was dropped when the speaker key was pressed again  (see #84297) was perceived as irritating.<br/><br/><!-- ac_codec3.cpp ac_codec3.h phonesig.cpp app_ctl.cpp --><br/><br/>
   
== IP22 IP24 IP28 IP305: Sometimes the DSP stops after sending CLIP (2) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89760 89760]
|}
..<br/><!-- ac_494e.cpp ac494004ce3_680.00.pf.02.h  -->
   
== SIP: Bug in handling of INVITE with Replaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89777 89777]
|}
Bug in handling of INVITE with Replaces.<br/>Results in hanging call.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP-DECT: Trap with call transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89786 89786]
|}
A trap occurs if a call transfer is received in the IP-DECT radio module. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectradio.cpp<br/>-->
   
== Fix for MIPS counter ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89804 89804]
|}
MIPS counter was incorrect on IP1201 and IP4001<br/><br/><!--<br/>ip1201.cpp<br/>ip4001.cpp<br/>-->
   
== SIP: Media negotiation fails on calls into Waiting Queue ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89838 89838]
|}
Media negotiation fails on calls into Waiting Queue if<br/>caller put call on hold before WQ agent accepts the call.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== 'power-off loop' relay switching function failure ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89942 89942]
|}
Especially POE-switches with higher supply voltages than 48V lead to a decreased timespan of powering the build-in relays of a ip6010/ip810 gateway. The detection of a power-fail condition is therefore derived from the POE ICs which react earlier and thus increases powering time of the relays.
   
== myPBX: Default group visibility was not displayed correctly ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89954 89954]
|}
The default group visibility can be configured from v9hotfix17. Regardless of that configuration myPBX showed full visibility in the visibilty settings.<br/><!--<br/>pbx_api.h<br/>pbx.h<br/>pbx_client.cpp<br/>-->
   
== IP0010 IP1060 IP3010 IP6010 IP810 IP22 IP24 IP28 IP302 IP305: DSP Update to Version 680.07 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89956 89956]
|}
Fixed modem bypass with slow modems<br/><br/><!-- <br/>DSP code details at <br/>\\\\innovaphone.sifi\\dfs\\Dokumente\\Hardware\\G7xx\\Audiocodes\\firmware\\firmware_ac49x\\680.07<br/><br/>ac49x_680/ac49*.h  ac_494e.cpp ac_491.cpp ac_dsp3.cpp<br/><br/>Also AC494 DSP clock changed from 100 to 125MHz and report interval changed to 5seconds. <br/>-->
   
== PBX-SOAP: Present normalized number of peer also ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88521 88521]
|}
The SOAP API presents the adjusted number of the peer (called/calling), which is the shortest possible number which can be dialed to call this. It is the same number as displayed on the phone. Sometimes an application needs to know the normalized number of the peer, which is the number in the context of the root node. This number is sent as additional number with the identifier "norm"<br/><!--<br/>pbx_xml.cpp<br/>pbx.cpp<br/>-->
   
== IP232,IP222,IP241: Config option to adjust LCD brightness in idle state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89261 89261]
|}
-> Main Menu -> Phone Setup -> LCD light (idle state)<br/>Can be tuned down to zero.<br/><br/><!--<br/>9.00\\phone_orchid\\box\\forms\\lcd_lib\\forms_color.cpp<br/>9.00\\phone_orchid\\box\\forms\\lcd_lib\\forms_color.h<br/>9.00\\phone_orchid\\box\\forms\\lcd_lib\\forms_color_mod.cpp<br/>9.00\\phone_orchid\\common\\interface\\forms.cpp<br/>9.00\\phone_orchid\\common\\interface\\forms.h<br/>9.00\\phone_orchid\\phone\\app\\app_form.cpp<br/>9.00\\phone_orchid\\phone\\app\\app_gui.cpp<br/>9.00\\phone_orchid\\phone\\app\\app_gui.h<br/>9.00\\phone_orchid\\phone\\phone_user_if.h<br/>9.00\\phone_orchid\\phone\\phonetxt.h<br/>9.00\\phone_orchid\\phone\\txt\\phonetxt-latin1.cpp<br/>9.00\\phone_orchid\\phone\\txt\\phonetxt-utf8.base<br/>9.00\\phone_orchid\\phone\\txt\\phonetxt-utf8.cpp<br/>9.00\\phone_orchid\\phone\\user\\phone_user.cpp<br/>9.00\\phone_orchid\\phone\\user\\phone_user.h<br/>9.00\\phone_orchid\\platform\\config.h<br/>-->
   
== case independence for the characters of the Basic Russian Alphabet added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89367 89367]
|}
mappings added<br/><br/><!-- str.cpp --><br/>
   
== H.323: Automatically connect signaling TCP if NAT router is detected ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89497 89497]
|}
When regestering an endpoint from a private network to a PBX within the public network, the signaling TCP connection must be established and maintained by the endpoint. Otherwise calls to the endpoint are not possible.<br/><!--<br/>h323sig.cpp<br/>h323ras.cpp<br/>h323.h<br/>h323asn1.h<br/>-->
   
== PRI-QSIG: Interop config for channel numbering ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89578 89578]
|}
The QSIG standard defines to use Channel numbers (1-30) instead of timeslot (1-15, 16-31) as it is defined for EDSS1. There are many 'old' QSIG implementations around, which do it wrong. The QSIG-ECMA1 protocol setting is used for these 'old' implementations and the QSIG-ECMA2 setting for standard conform inplementations.<br/><br/>With the QSIG-ECMA1 also 'old' facility coding is used. There is also the combination of standard facility coding and timeslots for channels around so an independent mechanism to configure the channel numbering is needed.<br/><!--<br/>q931.cpp<br/>q931.h<br/>isdn_interop.xsl<br/>-->
   
= V9 Hotfix 20 (9061198) =
Changes included in Version 9 hotfix20<!---->
[http://mantis.innovaphone.com/view.php?id=90101 Definition]
 
 
   
== SIP: Auto answer with SDP in ACK ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89539 89539]
|}
Auto answer results into no-audio when INVITE comes w/o SDP offer.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Fix for overlap dialing with KPML ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89581 89581]
|}
Dialing digits entered before KPML subscription is established<br/>need to be queued until KPML subscription is established.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== SIP: Re-try INVITE after 407 even if no password configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90024 90024]
|}
Calculate Digest with zero-length password and re-try INVITE.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP232,IP222,IP241: Truncate directory entry information ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90027 90027]
|}
Truncate directory entry information to keep from overlapping with number type indication.<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== IP-DECT: Don't show DTMF in radio call list ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90034 90034]
|}
User dialled digits during calls which are sent as DTMF should not be shown in the radio call list. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dect_comcerto/platform/config.h<br/>ip1201/platform/config.h<br/>ip4001/platform/config.h<br/>dectradio.h<br/>dectradio.cpp<br/>dectradio_mastercall.cpp<br/>-->
   
== H.323: Allow media offers with 0.0.0.0 as address ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90053 90053]
|}
Needed for SIP interoperability. Some third party SIP PBXs use addresses of 0.0.0.0 to indicate that they don't receive media. This may happens if an endpoint is put on hold. We did not forward such an offer and thus no Music on Hold was heard.<br/><!--<br/>h323ch.cpp<br/>-->
   
== PBX: Busy On ... Calls at PBX objects did not take into acccount that a call may be routed back to Slave ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90054 90054]
|}
The busy on ... calls on PBX objects can be used to limit bandwidth usage between a master and a slave to a certain number of calls. Some calls are sent from a slave to the master and back to the slave if the routing decision cannot be done on the slave alone. This happens if escapes are used which overlap other obects (e.g. the local trunk). It is a common configuration the the E.164 routing scheme.<br/>With this fix, these calls are not counted for this purpose.<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>pbx_wait.cpp<br/>pbx_wait.h<br/>pbx_trunk.h<br/>pbx_gw.h<br/>pbx_exec.h<br/>pbx_bc_conf.cpp<br/>pbx_bc_conf.h<br/>-->
   
== Voicemail: Send silence RTP during recording ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90095 90095]
|}
Send silence RTP during recording for some SIP carriers that do not send RTP without receiving RTP.<br/><br/><!--<br/>webmedia.cpp<br/>-->
   
== IP2000: Prevent blinking error LED  IP2000 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90102 90102]
|}
The firmware tried to load  the conference DSP, which is not available on the IP2000<br/><br/><!-- config.h --><br/>
   
== SIP: Memory leak when receiving NOTIFY(message-summary) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90106 90106]
|}
Memory leak when receiving NOTIFY(message-summary)<br/><br/><!--<br/>sip.cpp<br/>-->
   
== H.323: Support for registration from a private network thru NAT ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90306 90306]
|}
In case an endpoint registers to a PBX from within a private network thru a NAT router, the signaling TCP connection must be maintained in order to be able to receive calls. When the registration is up a dummy call is sent to the PBX to establish the signaling TCP. This TCP connection is maintained after the dummy call is cleared. If this TCP connection is lost (e.g. NAT Router reset), the Registration is cleared and restarted, so that after the re-registration another dummy call is sent.<br/><br/>This is a fix for the previous fix<br/><br/>fix: #89497: H.323: Automatically connect signaling TCP if NAT router is detected<br/><br/>which did not work well<br/><!--<br/>h323sig.cpp<br/>h323.h<br/>voip.h<br/>gk.cpp<br/>relay.cpp<br/>relay_api.h<br/>relay.h<br/>-->
   
== SIP: SUBSCRIBE using old IP address in Contact field ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90320 90320]
|}
If the IP address is changed at DHCP renew (or network change) the endpoint will immediately do a re-register to update the SIP Proxy with the new IP address.<br/>All SIP messages but SUBSCRIBE uses the new IP address in the Contact field.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX: CC Requests were sent with wrong number if a SendNumber was configured at the user ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90432 90432]
|}
Usually this is no problem only when interworking with some QSIG PBX's this causes the call-completion to fail.<br/><!--<br/>pbx.cpp<br/>-->
   
== phone_orchid: dialtone missing when recording is  active and the active call is held to open a consultation call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90433 90433]
|}
the consultation call could be established but there was no dialtone after pressing the R-key and no ringback tone after the number had been entered.<br/><br/><!-- ac_phone3.cpp ac_phone3.h codec.cpp codec.h phonesig_if.h phonesig.cpp phonesig.h app_call.cpp -->
   
== Possible trap when doing a leak check ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90451 90451]
|}
When many leaks exist or leak check is done when much tracing is turned on. The leak check itself could cause a watchdog trap, because the collecting of the leaks is done on highest priority so not even the timer interrupt could trigger the watchdog.<br/><!--<br/>os.cpp<br/>-->
   
== IP-DECT: Busy state on maximum call count ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90461 90461]
|}
The base station does not go to the busy state if the maximum call count is reached and the last call is an incoming call. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectradio.cpp<br/>dectradio_dectcall.cpp<br/>-->
   
== PBX: Support for Opticaller Data Callthru did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90480 90480]
|}
Support for Opticaller data callthru was added, but did not work<br/><!--<br/>pbx_admin.cpp<br/>-->
   
== PBX: Forking a call to a Trunk with "Outgoing call restricted", causes the original call to be restricted as well ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90487 90487]
|}
The "Outgoing call restricted" flag on the trunk object to which the call was forked caused the call as a whole to be marked as Calling Line Presentation Restricted.<br/><!--<br/>pbx_trunk.cpp<br/>-->
   
== SIP: Locally configured DNS entries were not used if no DNS server configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90508 90508]
|}
If no DNS server was configured, but DNS names are to be resolved,<br/>local DNS entries can be added (Services/DNS/Hosts).<br/>SIP stack fails with SRV query and does not try A query which would deliver IP address.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP-DECT: RTP stream ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90539 90539]
|}
If a remote hold event is received, no RTP data should be sent by the IP-DECT device.<br/>A CTI initiated call is established with a call transfer and a "No Media data received" error event can occur.<br/>This is fixed now.<br/><br/><!--<br/>Changed files:<br/>h323ch.cpp<br/>dectradio_call.cpp<br/>dectradio_mastercall.h<br/>dectradio_mastercall.cpp<br/>-->
   
== SIP: Trap on IP-DECT ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90569 90569]
|}
Trap in GK-CHANNEL when Dectmaster application sends DTMF before call if created.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Disabled IP-DECT interface tries to register ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90597 90597]
|}
Disabled IP-DECT interface tries to register.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== H.323: Timer to monitor response to setup too short for some traffic cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90696 90696]
|}
This created unnecessary event in IP-DECT systems when calling powered off or out of range handsets<br/><!--<br/>h323sig.cpp<br/>-->
   
== PBX Waiting: Potential Trap if editing while a call is initiated with SOAP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90766 90766]
|}
The Waiting object can be used as outgoing dialing object with SOAP. If this is done and the configuration is changed while an outgoing call was pending, a trap could happen<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== H.323: Potential Trap in special case which could only happen in version 10 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90768 90768]
|}
This fixed is merged to version 9 only of consistency reasons<br/><!--<br/>h323_ras.cpp<br/>-->
   
== SIP: Respect changes in PAI/PPI header when receiving UPDATE with SDP offer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90778 90778]
|}
PAI/PPI was processed when receiving UPDATE without SDP offer.<br/>PAI/PPI was ignored when receiving UPDATE with SDP offer.<br/>Now PAI/PPI is processed when receiving UPDATE with SDP offer.<br/><br/><!--<br/>sip.cpp<br/>--><br/>
   
== SIP: Possible buffer overrun ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90780 90780]
|}
Fix for possible buffer overrun.<br/><br/><!--<br/>siputil.cpp/h<br/>-->
   
== SIP: Wrong error log "Timeout during media negotiation for call" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90821 90821]
|}
Error log "Timeout during media negotiation for call" may occur after re-negotioation.<br/>Re-negotioation occurs during hold/retrieve/transfer.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX Trunk: Name to Number Feature did not work with calls to extern ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90858 90858]
|}
If an endpoint cannot be found by name, the call should be forwarded to extern<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>pbx_trunk.cpp<br/>pbx_trunk.h<br/>-->
   
== PBX CSV Import: Corrupted objects at buffer boundaries ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90942 90942]
|}
The upload is processed in chunks of 2K. At boundaries of these chunks data could be corrupted. This was fixed and the chunk size increased to 10K<br/><!--<br/>pbx_admin.cpp<br/>pbx_admin.h<br/>-->
   
== Phone: Trap when selecting registration for a directory entry ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90999 90999]
|}
Trap when selecting registration for a directory entry,<br/>but only if the registration has either no name or no number.<br/><br/><!--<br/>phone_dir_ui.cpp<br/>-->
   
== H.323: No event should be generated in State 11 and 25 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91020 91020]
|}
State 25 is incoming overlap sending. This means a call was received with incomplete dialing information and the caller failed to dial more digits within the timeout of 2min. This is no indication of any malfunction but only a usage problem, so no event should be generated.<br/><br/>State 11 is disconnecting with inband announcement. A timeout happens if a user listens to the announcement for more then 30s. This could be normal.<br/><!--<br/>h323sig.cpp<br/>-->
   
== SIP: Trap when cancelling call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91023 91023]
|}
Double delete of a call entity.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== SIP: Heavy TLS retry load when server certificate was rejected ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91033 91033]
|}
Collateral damage from earlier fixed for DNS refreshing.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== H.323: Incoming faststart call was sometimes not accepted as faststart ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91136 91136]
|}
Only happens if non EFC is used on the incoming call, so this only happens in interop cases with other H.323 equipment<br/><!--<br/>h323ch.cpp<br/>-->
   
== SNMP Get-Next Requests Carrying an Octet-String Value Caused Memory Leak ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91215 91215]
|}
<!--<br/>mib.cpp<br/>-->
   
== SIP: Media negotiation for video fails if called through waiting queue or multi reg ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91235 91235]
|}
Media negotiation for video fails if called through waiting queue or multi reg.<br/>In this case the PBX has to handle offer/offer-collision.<br/>In this case the PBX must select audio and video codec.<br/>In this case the PBX must send SDP answers to both endpoints.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Secondary target (hostname) is not resolved ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91287 91287]
|}
Usually a response to a SRV query delivers additional records containing the ip address of any target (hostname).<br/>Some DNS servers do not.<br/>Additional A querys are required.<br/>An A query was issued for the primnary target (most preferred hostname).<br/>No A query was issued for the secondary target (less preferred hostname).<br/>Fixed now.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== IP-DECT: Trap in Radio module (IP1202) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91315 91315]
|}
A trap in the IP-DECT Radio module occurs if the Mobility Master is used and a duplicate IPEI command is sent to the Master. The Master handles it with a location cancel and an endpoint delete command sent to the radio. If the two commands arrives with no delay, the Radio module traps. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectradio.cpp<br/>dectlocalusers.cpp<br/>-->
   
== Ldap Replication from NDS ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91347 91347]
|}
Skip isDeleted attribute with content others than 'true'. Occurred when replicating from an NDS running in AD compatibility mode.<br/><!--<br/>ldaprep.cpp<br/>-->
   
== SIP: Wrong call was disconnected after successful transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91349 91349]
|}
Wrong call was disconnected after successful transfer.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: SDP answer for T.38 switch-over must contain multiple media descriptions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91377 91377]
|}
... if SDP offer contains multiple media descriptions.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX: Not possible to login as user with non-full admin rights if 'Password protect all Pages' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91414 91414]
|}
Some pages needed for the UI, which are normally not password protected, could not accessed with the reduced rights<br/><!--<br/>http.cpp<br/>-->
   
== SIP: Follow offers ptime proposal ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91421 91421]
|}
Better follow offers ptime proposal.<br/>Otherwise SAMwin operator does not stop sending re-INVITE.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP0010 IP1060 IP3010 IP6010 IP22 IP24 IP28 IP302 IP305: switch from modem bypass to voice did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91429 91429]
|}
In some cases announcments with music trigger modembypass, in this case at least the fallback to voice should work.<br/><br/><!-- ac_dsp3.cpp -->
   
== H.323: Allow update of Registration password ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91440 91440]
|}
needed in case a password is changed, which is replicated to a DECT system<br/><!--<br/>h323sig.cpp<br/>h323.h<br/>voip.cpp<br/>voip.j<br/>-->
   
== H.323: PROGRESS in connected state was treated as 'unexpected' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91483 91483]
|}
This happened with H.323 connections without registration when disconnecting a call with inband information (e.g. a call to an ISDN interface). Unnecessary events were generated.<br/><!--<br/>h323sig.cpp<br/>h323sig.h<br/>h323_tbl.tbl<br/>-->
   
== Linux: Memory allocation changed for IP810 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86420 86420]
|}
The memory allocation for the IP810 is changed to 128MB/384MB for innovaphone/Linux.<br/><br/>Important:<br/>Linux [[Support:Linux_Application_Platform_Hotfix_11_and_before_won't_run_on_Firmware_V9_hotfix_20_and_later_on_IP810|must be used with the kernel version 3.4.10 or later]]. This kernel is included in the Linux Application Platform V9.00 hotfix12 and later. The kernel is automatically updated with the Linux Application Platform V9.00 hotfix12.<br/><br/><!--<br/>Changed files:<br/>ip6010/platform/config.h<br/>ip6010/platform/startup.S<br/>ip6010/platform/ip6010.cpp<br/>-->
   
== phone: new "Do Not Disturb" action "ring once" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89960 89960]
|}
If "Phone/User-x/Preferences/Do Not Disturb/Action: ring once" is selected a new inbound call is indicated with a short tone only.<br/>Both the the tone and the duration of the tone can be configured under ""Phone/User-x/Preferences/Ring Tones/Do Not Disturb".<br/>If not configured the default ring tone is played for one and a half second. <br/><br/><!-- phone_config.cpp phone_edit.cpp reg_edit_general.xsl phone_config.h phone-strings-latin1.h phone-strings-utf8.h phone-text-tables.h app_ctl.h app_call.cpp app_gui.cpp phonetxt.h phonetxt-utf8.cpp phonetxt-latin1.cpp phonetxt-utf8.base<br/> -->
   
== PBX: Support of long user-user-informations by SOAP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90029 90029]
|}
Support of long user-user-informations (UUI) for SOAP sessions added. A long UUI is split into multiple short UUIs supported by Q.931.<br/>It is required by the FAX interface.<br/><br/><!--<br/>Changed files:<br/>pbx_xml.h<br/>pbx_xml.cpp<br/>-->
   
== Relay: Support of long user-user-informations by FAX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90030 90030]
|}
Support of long user-user-informations (UUI) for the FAX interface added. A long UUI is split into multiple short UUIs supported by Q.931.<br/><br/><!--<br/>Changed files:<br/>webfax.h<br/>webfax.cpp<br/>-->
   
== Gateway: Support of a header line for FAX documents ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90374 90374]
|}
Support of a header line for FAX documents is added in the FAX interface.<br/><br/><!--<br/>Changed files:<br/>webfax.h<br/>webfax.cpp<br/>t30.h<br/>t30.cpp<br/>t4.h<br/>t4.cpp<br/>facsimile_g3.h<br/>facsimile_g3.cpp<br/>--><br/>
   
== SIP: Support for MESSAGE inside voice call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90408 90408]
|}
Support for text messages inside voice call.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX-SOAP: Support for 'rc' and 'srce164' on UserCall on Waiting Queue ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90537 90537]
|}
If a Waiting Queue is used for outgoing calls, these features can be usefull for some applications<br/><!--<br/>pbx_api.h<br/>pbx_xml.cpp<br/>pbx_wait.cpp<br/>pbx_wait.h<br/>-->
   
== PBX: New configuration option 'Hide connected Number' at object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90693 90693]
|}
In some cases it is desireable not to reveal the final destination of a call to a caller. For example a call center agent should not be called directly by the customer.<br/><!--<br/>pbx.cpp<br/>pbx_api.h<br/>pbx_admin.cpp<br/>pbx_edit_object.xsl<br/>pbx_wait.cpp<br/>-->
   
== IP-DECT: Configuration option 'Registration with system password' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91460 91460]
|}
The configuration option 'Registration with system password' is added. If ticked, all users are registered with the system password. This is useful, if the PBX users are only allowed to register with the PBX password.<br/><br/><!--<br/>Changed files:<br/>dectmaster.h<br/>dectmaster.cpp<br/>dectmaster.xsl<br/>_inn_asc_dectmaster.xsl<br/>-->
   
== Voicemail: URL-En-/Decoding ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91609 91609]
|}
new statement allows to URL-encode or URL-decode a string<br/><lib-enc string=".." string_out="$var" type="url"/><br/><lib-dec string=".." string_out="$var" type="url"/><br/><!--<br/>vm_script_if.cpp<br/>--><br/>
   
= V9 Hotfix 21 (9061222) =
Changes included in Version 9 hotfix21<!---->
[http://mantis.innovaphone.com/view.php?id=91721 Definition]
 
 
   
== PBX Mobility: Connected number from mobile phone was forwarded to caller ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90722 90722]
|}
If a call is answered on the mobile phone, it should look identical to the caller to the case that the call was answered locally. This means a connected number from the mobile phone must not be forwarded.<br/><!--<br/>pbx_mobility.cpp<br/>-->
   
== Potential Trap when rapidly switching local Media connections (Conferencing) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=90933 90933]
|}
There was a race condition when switching local media channels (e.g. ISDN channels to conference interfaces), which could cause media not functioning or even a trap<br/><!--<br/>media.cpp<br/>medialib.h<br/>-->
   
== SIP: Better handling of incoming calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91153 91153]
|}
Msg sequence INVITE,CANCEL,INVITE may result into second call rejected.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== IP0010,3010,6010,1060,810: ethernet link down not detected when a cable was unplugged after boot ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91600 91600]
|}
The link state interrupt was triggered only once after boot, further link state changes were not indicated.<br/><br/><!-- mv78x00_drv.cpp -->
   
== myPBX: Rejecting an incoming broadcast call disconnected the call for all alerting endpoints ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91719 91719]
|}
The call sould continue alerting on the other endpoints.<br/><!--<br/>pbx_client.cpp<br/>-->
   
== phone: ip222, ip232:  reset/restart USB headset when a hang condition or a port disconnect condition is detected ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91732 91732]
|}
For unknown reasons some types of wireless headsets stop working after some hours or days. Either the port state changes to disabled or the device rejects control commands with a stall response. In both cases the device is reset and restarted now. If even this fails the complete USB host controller is reset and in most cases the device returns to operational state thereafter<br/><br/><!-- ohci.cpp ohci.h usb_hid.cpp --><br/>
   
== phone: ip222, ip232: Some USB headsets were not detected after a soft reset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91734 91734]
|}
This was observed with Jabra BIZ 2400 USB at IP222/232 with hardware build 800 and newer.    <br/><br/><!-- ohci.cpp -->
   
== IP-DECT: Trap with data calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91807 91807]
|}
The IP-DECT Radio traps if a data call is released and the release includes a facility.<br/><br/><!--<br/>Changed file:<br/>dectradio_fty_call.cpp<br/>-->
   
== Kerberos administration: Increase maximum number of Kerberos users from 20 to 50 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91847 91847]
|}
Increase limit on page General/Kerberos.<br/>Use POST for submitting form, instead of GET.<br/><!--<br/>kerberos_db.xsl<br/>-->
   
== Voicemail: &lt;pbx-getcallinfo out-leg2-name=".." out-leg2-orig-name=".."&gt; ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91874 91874]
|}
Passing name info of divertingLegInformation2 facility into the script.<br/><!--<br/>pbx/vm/*<br/>-->
   
== PBX-SOAP: Potential Trap with UserClear ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91886 91886]
|}
A SOAP applicatoin (e.g. TAPI) uses the method UserClear to clear a call. This could cause a trap on some platforms when doing this for a mobile endpoint.<br/><!--<br/>pbx_xml.cpp<br/>-->
   
== SRTP: Avoid one-way media with high start sequence numbers ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91892 91892]
|}
In some cases SRTP calls had one-way media because the RTP sequence number wrapped from 65535 to 0 at be beginning of the call before the receiver started receiving and processing packets.<br/><br/>The scope of start sequence numbers for RTP streams is changed from [0;65535] to [0;32767] to make sure that the receiver can always receive packets before the overflow happens.<br/><br/>The calculation of the roll-over counter (ROC) is also improved to be more reliable.<br/><br/><!--<br/>media.cpp<br/>cipher_api.h<br/>cipher_api.cpp<br/>-->
   
== H.323: Unnecessary re-initializing of rtp-channel on incoming calls to phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91898 91898]
|}
This did not create any problems except CPU load and together with another problem in RTP it caused no media on incoming SRTP calls approximately every 1000th call.<br/><!--<br/>h323ch.cpp<br/>phonesig.cpp<br/>phonesig.h<br/>-->
   
== IP22,IP24,IP28,IP302,IP305: RTP-DTMF not offered when using a/b interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91905 91905]
|}
For example:<br/><br/>\tv=0<br/>\to=- 14 1 IN IP4 10.17.1.91<br/>\ts=-<br/>\tt=0 0<br/>\tm=audio 16414 RTP/AVP 8 0 18 4 97<br/>\tc=IN IP4 10.17.1.91<br/>\ta=rtpmap:97 CLEARMODE/8000<br/>\ta=fmtp:18 annexa=yes<br/>\ta=fmtp:18 annexb=yes<br/>\ta=ptime:20<br/>\ta=silenceSupp:off - - - -<br/>\ta=sendrecv<br/><br/><!--<br/>ab_sig.cpp<br/>-->
   
== PBX: MOH URL parameters for parked calls should refer to the parked-to and not parking user ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91931 91931]
|}
The MOH URL Paramter (%l, %h, %n, ...) can be used to use different MOH Files based on the User who is holding the call. In case of a parked call this should refer to the object where the call is parked, not to the user who has initiated the parking.<br/><!--<br/>pbx.cpp<br/>-->
   
== IP-DECT: Wrong XML data in Radio endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91933 91933]
|}
The XML data in the Radio endpoint is wrong and fixed now. The data is only used for the command show-endpoints, not for the GUI.<br/><br/><!--<br/>Changed file:<br/>dectlocalusers.cpp<br/>-->
   
== PBX Mobility: Call from mobile endpoint to a user with mobility, but without PBX phone was disconnected ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91976 91976]
|}
This was a collateral damage of<br/><br/>fix: #86813: PBX Mobility: Take precaution against hanging calls because of misbehaving mobile phone or client<br/><br/><!--<br/>pbx.cpp<br/>-->
   
== SIP/DNS: Wrong port used on secondary SIP server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91995 91995]
|}
If SRV query returns 2 hosts with different port, but no IP address in additional records,<br/>SIP starts two A queries for the two host names.<br/>Both resolved IP addresses are combined with the port of the most preferred host of the SRV answer.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== IP-DECT: Hold/Retrieve could result in no media for incoming SIP calls with SRTP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92014 92014]
|}
This was in fact a H.323 media negotiation problem between master and slave<br/><!--<br/>h323ch.cpp<br/>-->
   
== SIP/WLAN: Keep local Contact-URI up-to-date on subscriptions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92134 92134]
|}
Keep local Contact-URI up-to-date on subscriptions (e.g. message summary) when local ip address changes at runtime.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP-DECT: Hold and Retrieve with SIP and SRTP could result in no media ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92189 92189]
|}
Problem with forwarding changed SRTP Keys from master to radio<br/><!--<br/>h323ch.cpp<br/>-->
   
== phone: ip241: do headset volume control in digital domain ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92203 92203]
|}
<!-- ac_codec3.cpp -->
   
== IP232,IP222,IP241: Reduce flicker when opening details of call list entry ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92242 92242]
|}
Reduce flicker when opening details of call list entry.<br/><br/><!--<br/>phone_list_ui.cpp<br/>-->
   
== IP-DECT: Potential trap when switching to an from 3pty conference ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92262 92262]
|}
In case of a very unlikely collision of events, a message was sent to an already deleted object, which cause a restart<br/><!--<br/>comcertp_msp_drv.cpp<br/>+ many more dsp drivers<br/>-->
   
== IP232,IP222,IP241: Fix for display of international numbers on phone UI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92335 92335]
|}
Show international numbers as +4930123456 instead of I4930123456.<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== PBX: Call Completion to a user without registration, but forking, caused immediate Callback ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92341 92341]
|}
Instead to call completion request should be rejected in this case<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: Huge SIP messages causes out-of-sync on TCP stream ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92373 92373]
|}
Reading SIP messages from TCP stream gets confused by huge SIP messages.<br/>Presence exchange with external UC was disordered.<br/>Increased size limit from 100KByte to 200KByte.<br/><br/><!--<br/>siptrans.cpp<br/>-->
   
== Gateway: Transmitting FAX documents to receiver with polling mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92388 92388]
|}
It is not possible to send fax documents to a receiver with polling capability. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>t30.cpp<br/>-->
   
== IP-DECT: Cipher key index table update function ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92467 92467]
|}
The cipher key index table is wrongly updated in the Crypto Master if a entry line yet exists. This is fixed now.<br/>The Crypto Master is needed for DECT Security Early Encryption.<br/><br/><!--<br/>Changed file:<br/>crypto_key_index_table.cpp<br/>-->
   
== IP222 IP232: Handset gains changed to avoid low microphone volume ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92577 92577]
|}
Low microphones levels were squelched.<br/><!-- ac_codec3.cpp <br/>Gain update nach Empfehlung von Audiocodes:<br/><br/>Dear Carsten,<br/> <br/>First, I can?t recall if there is a reason for you to use the 660.27 patch? Please remind me if there is a reason for not upgrading to version 680.<br/>In this patch version there is a bug in the EC debug mechanism (The Seq. # is not initialized properly). It would be better to upgrade.<br/> <br/>We?re suspecting the cutoffs are due to the new noise-tail remover, which you complained about (the dispersion phenomenon). It can be harm in low gains, so we would like the gain the the EC input to be higher.<br/>Please try another set of gains (In barracks ? Current gains):<br/> <br/>Dig. Output gain = -5 dB (-8 dB)<br/>Anl. Output gain = -3 dB (0 dB)<br/> <br/>Anl. Input gain  = +37.5 dB (+31.5 dB)<br/>Dig. Input gain = +2 dB (+8 dB)<br/> <br/>Please let me know if you get any improvement from this above test.<br/> <br/>Thanks,<br/><br/>-->
   
== Voicemail: Emailing file names with '#'-characters failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92757 92757]
|}
An Escape mechanism wasn't applied<br/><!--<br/>pbx/vm_script_if.cpp<br/>-->
   
== Webmedia: New URL parameter "fallback=true" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92957 92957]
|}
New URL parameter "fallback=true".<br/>If given and the specified media file cannot be retrieved,<br/>webmedia starts playing builtin MOH.<br/><br/><!--<br/>webmedia.cpp/h<br/>-->
''Status:''
Implemented in 10.00 und 9.00
   
== Trap On Ldap DOS Attack ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92978 92978]
|}
Malign asn.1 content wasn't rejected<br/><!--<br/>ldapasn1.cpp<br/>-->
   
== IP800 IP6000 IP2000: duplicated DTMF digits in transcoding scenarios ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92981 92981]
|}
When tandeming VOIP links for trancoding or other purposes DTFM digits were sometimes duplicated.<br/>The RTP carried up to 25ms DTMF remaining DTMF, now its only 16ms.<br/><br/><!-- AC48xLo.c -->
   
== PBX: Trap if user object is deleted, which is used by other applications (e.g. myPBX) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92985 92985]
|}
The applications need to cleanup in this case<br/><!--<br/>pbx_api.h<br/>pbx.cpp<br/>pbx.h<br/>pbx_client.h<br/>pbx_client.cpp<br/>-->
   
== IP-DECT: CSV user export ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92991 92991]
|}
There are some missed users in the CSV user export file. It occurs if there are users with login rights. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectusers.cpp<br/>->
   
== Voicemail: Url Parameter To Control Number Processing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93043 93043]
|}
$_leg2tweak<br/>--<br/>Controls <pbx-getcallinfo out-leg2=".."/><br/>true(default): set leg2 to <ext-nr> from <vm-nr>+<ext-nr><br/>false: set leg2 according to received divertingInfoLeg2 facility<br/><br/>$_trailhash<br/>--<br/>Controls <pbx-getcallinfo out-cdpn=".."/><br/>true: pass trailing (en-bloc) '#' into cdpn<br/>false(default): don't pass trailing (en-bloc) '#' into cdpn<br/><br/>http://wiki.innovaphone.com/index.php?title=Howto:Configure_the_innovaphone_Voicemail#URL_Query_String_Variables<br/><br/><!--<br/>pbx_vm.cpp/.h<br/>-->
   
== IP0010,3010,6010,1060,810: limit number of ethernet packets processed per receive interrupt ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93130 93130]
|}
this prevents that too much time is spent in ethernet driver in case of broadcast storms or DOS attacks.<br/><br/><!-- mv78x00_drv.cpp mv78x00_drv.h mv78x00_drv_s.xsl -->
   
== IP-DECT: Call transfer with enbloc dailing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93185 93185]
|}
Call transfer with enbloc dailing fails. This is fixed now.<br/>This changes also the R-key handling: after dialling a digit for a consultation call the call must disconnect with R-1 like in ring-back state.<br/><br/><!--<br/>Changed files:<br/>dectradio_call.h<br/>dectradio_call.cpp<br/>dectradio_mastercall.cpp<br/>->
   
== SRTP: Remove traces when packet authentication failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93203 93203]
|}
SRTP and SRTCP software encryption produced traces when packet authentication failed. This is not needed, because an event is created anyway, when this happens frequently.<br/><!--<br/>cipher_api.cpp<br/>-->
   
== SNMP Walk udpTable, tcpConnTable Could fail ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93225 93225]
|}
The table index returned wasn't always lexically ascending, causing a walk to stop.<br/><!--<br/>udp4.cpp<br/>tcp4.cpp<br/>-->
   
== phone: ip222,ip232: sporadic boot time trap when a Jabra LINK 280 adapter is plugged ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93261 93261]
|}
the initialisation fails with CC=5 on first device descriptor read. after restart of host controller serial_irq() traps in reading the done list.<br/>Happens mostly with upload DRAM.<br/><!--<br/>ohci.h<br/>ohci.cpp<br/>-->
   
== IP-DECT/Relay: Blocked calls by hidden feature code *5/*7 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93272 93272]
|}
Outgoing calls with beginning number *5 or *7 are blocked by the feature codes module because of hidden new service codes for an OEM device (#79028). This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dtmffty.cpp<br/>-->
   
== PBX: Master Slave license update period 10s instead of 10min ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93330 93330]
|}
For test purposes the period was reduced to 10s, but by accident this change ended up in version 9 as well<br/><!--<br/>pbx.h<br/>-->
   
== Gateway: CGPN-Maps executed even if the Route did not match in case of enbloc calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93400 93400]
|}
For enbloc calls the CGPN of routes were executed even if the dialed number was incomplete.<br/><!--<br/>gk.cpp<br/>-->
   
== PBX: Port License counting wrong, when moving users ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93477 93477]
|}
When moving a user from a master to a slave, the license count on the master was reduced only after reboot.<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>-->
   
== PBX: XML error on User Interface if slave name with non-ascii characters used and registration was redirected from such a slave ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93483 93483]
|}
Conversion of UCS2 as received from the registration to UTF-8 on Web UI was wrong<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX: Hide connected Endpoint did nor work for forward to other PBX or Gateway object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93513 93513]
|}
Diverting Leg Information facilities or Name Identification facilities were still forwarded in this case.<br/><!--<br/>pbx.cpp<br/>-->
   
== LDAP Client: SearchRequest.derefAliases Changed To neverDerefAliases(0) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=94812 94812]
|}
Was derefInSearching(1)<br/><!--<br/>ldapdir.cpp<br/>-->
   
== Gateway: Header line of FAX documents with big endian devices ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=94824 94824]
|}
The header line of FAX documents with big endian devices was not correctly printed. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>t4.h<br/>t4.cpp<br/>--><br/>
   
== SIP: Port mapping with STUN failed since DNS resolvin of STUN server failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=94876 94876]
|}
Port mapping with STUN failed since DNS resolvin of STUN server failed.<br/>Wrong STUN server port was used (5060 instead of 3478).<br/><br/><!--<br/>sip.cpp/h<br/>--><br/>
   
== H.323: No media after blind transfer to Waiting Queue on other PBX, when operator connects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=94961 94961]
|}
Happened when different coders where used on caller and called side.<br/><!--<br/>h323ch.cpp<br/>-->
   
== SIP: Display names need escaping of " and \\ according to RFC-3261 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=94966 94966]
|}
Acc. to RFC-3261 characters " and \\ (%x22 and %x5C) are to be escaped as "quoted-pair".<br/><br/><!--<br/>sipmsg.cpp<br/>-->
   
== PBX Waiting: Presence set for operator was not cleared, on delete or editing of Waiting Queue object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95016 95016]
|}
When configuration of the Waitinng object is now changed, any presence set by the Waiting object is cleared.<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== Gateway: FAX interface interop with non-conforming Fax devices improved ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95029 95029]
|}
There are Fax devices sending wrong (too long) message initially after being called. In this case it is best handled by ignoring these message and wait for the retry instead of disconnecting the call.<br/><!--<br/>Changed file:<br/>t30.cpp<br/>-->
   
== SIP/UDP: Sending response to wrong address and port ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95065 95065]
|}
Sending response to wrong address and port.<br/>But only if Via header of incoming request contains domain name.<br/><br/><!--<br/>siptrans.cpp<br/>-->
   
== IP241: Headset receiver muffled sound ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95164 95164]
|}
..<br/><!-- ac_codec3.cpp  Headsetvolume wieder analog geregelt, mit der Digitaleinstellugng war der klang dumpf -->
   
== PBX Exec: Secretary availability monitoring did not work with multiple scretaries, with names starting identically ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95197 95197]
|}
The availability state (secretary booked into the exec primary group) was not associated with the correct secretary. A compare of the names only covered the first half of the name.<br/><!--<br/>pbx_exec.cpp<br/>-->
   
== Click sounds at caller side when calling another port of same gateway ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95436 95436]
|}
occured since V9hotfix5
   
== PBX Broadcast: Memory leak when calling busy broadcast object with round-robin config ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95439 95439]
|}
If all destinations of a broadcast object are busy a name-id facility generates a memory leak.<br/><!--<br/>pbx_bc.cpp<br/>-->
   
== IP222 IP232 IP241: Use fifo for DSP control channel ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95763 95763]
|}
try to fix a trap with USB headset <br/><!-- ac_494e.cpp  <br/>The fifo was implemented in fix 63648.<br/>The fifo usage was replaced with a ASSSERT at 20.10.2011.<br/>Now it is enabled again and a DSP error event "Host transmit queue congestion" is logged when a packet cannot be sent immediately.  <br/>-->
   
== IP232,IP222,IP241: Fix for call status display ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95769 95769]
|}
If a call was remotely disconneced during HOLD,<br/>the held phone was constantly displaying "held" instead of "disconnected".<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== SIP: Interworking issue with "LifeSize Passport/LS_PP1_4.11.9 (8)" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95785 95785]
|}
Problems decoding large and complex SDP offer from LifeSize.<br/><br/><!--<br/>sdpmsg.cpp/h<br/>-->
   
== 802.1x (EAPOL) did not work on interfaces configured for VLAN ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95931 95931]
|}
802.1x (EAPOL) frames received without a VLAN tag must always be passed to the protocol module, even if the interface is confiured to use VLAN
   
== PBX: Allow Name (instead of Long Name) to identify user for mobility data call thru ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91660 91660]
|}
This should simplify Opticaller configuration<br/><!--<br/>pbx_admin.cpp<br/>-->
   
== IP-DECT: Static ports between Master and Radio ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=91815 91815]
|}
Now the VOIP connections between the Master and the Radio use static ports instead of dynamic ones. This is useful if only a few ports should be opened through a firewall. For calls from the Radio to the Master the ports 1716 and 1717 (TLS) are used. For the default Master connection for calls from the Master to the Radio the ports 1718 and 1719 (TLS) are used. For dynamic Radio-Master connections the ports from 1722 are used. Every connection needs two ports.<br/><br/><!--<br/>Changed files:<br/>dectmaster.cpp<br/>dectradio.h<br/>dectradio.cpp<br/>dectradio_reg.h<br/>dectradio_reg.cpp<br/>h323sig.cpp<br/>--><br/>
   
== IP-DECT: Cipher key index request for security test devices ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92223 92223]
|}
Cipher key index request procedure is changed to pass the test with security test devices. The cipher key index is used for DECT "Early Encryption"(EE).<br/><br/><!--<br/>Changed files:<br/>dectusers_if.h<br/>dectmaster.cpp<br/>-->
   
== Voicemail: &lt;pbx-getcallinfo out-calling-name="..."/&gt; ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92286 92286]
|}
Pass H.450 callingName into the script<br/><!--<br/>pbx/vm/*<br/>-->
   
== PHONE_SIG_MODE_KEEP_NUMBER_TYPE can be set at phonesig startup to keep type of number in all q931 numbers ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92385 92385]
|}
<!-- phonesig_if.h phonesig.cpp -->
   
== PBX Trunk: Flag to block presence/dialog-info subscriptions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=92824 92824]
|}
Some networks e.g. sip carriers behave badly when receiving subscribes for presence/dialog-info, which cannot be handled, so there is an option added to block these.<br/><!--<br/>pbx_api.h<br/>pbx.cpp<br/>pbx_trunk.cpp<br/>pbx_trunk.h<br/>pbx_edit_trunk.xsl<br/>-->
   
== SIP: Debug information for problems with STUN ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93233 93233]
|}
Added debug output to trace problems with STUN.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Gateway: FAX interface User-User-Info error response in disconnect event ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=93455 93455]
|}
User-User-Info response of the FAX interface is not forwarded in the alerting state. The problem exists when call to Fax interface was routed through multiple PBX. Now the UUI response is sent in the disconnect event if the response is a error notification.<br/><br/><!--<br/>Changed files:<br/>dummysig.cpp<br/>webfax.h<br/>webfax.cpp<br/>--><br/>
   
== IP222 IP232 IP241: DSP code update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=94916 94916]
|}
DSP code update to version 680<br/><br/><br/><!-- ac_494e.cpp phone_orchid.mak  ac_codec3.cpp phone-dsp.xsl new dsp file <br/><br/><br/><br/>Dear Carsten,<br/> <br/>We found the bug in our FW.<br/>You can try using the attached patch or, if you prefer, we should have a new official 680 release within two weeks.<br/>Anyway, I?ll update you once the new release is available.<br/> <br/>Regards,<br/>Eliezer <br/> <br/>-->
   
== SIP: New interop tweak "No Remote Hold Signaling" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=94954 94954]
|}
New config option on gateway interfaces "No Remote Hold Signaling".<br/>Disables interworking of "inactive" into remoteHold.<br/><br/><!--<br/>voip.h<br/>sip.cpp<br/>gk.cpp/h<br/>relay_edit_voip.xsl<br/>-->
   
== IP6010: DSP trace options improved ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95078 95078]
|}
T38 trace flag worked only in one direction.<br/>Changing trace options needed a reboot.<br/><br/><!-- ac_491.cpp  ac_dsp3.cpp --><br/>
   
== IPv6: Disable checkmark on ethernet interfaces added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95452 95452]
|}
Allows to disable sending/receiving of IPv6 packets on this interface. This may be desireable for security reasons<br/><!--<br/>ip6_ethif.cpp<br/>ip6_ethif.h<br/>ip6_ethif_ip.xsl<br/>-->
   
== IP222 IP232 IP241: DSP code update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95764 95764]
|}
Channel was muted during silent periods ( no CNG during NLP operation ).<br/><br/><!-- ac_494e.cpp  ac494e002ce4.680.10.pf.01. -->
   
= V9 Hotfix 22 (9061240) =
Changes included in Version 9 hotfix22<!---->
[http://mantis.innovaphone.com/view.php?id=96108 Definition]
 
 
   
== PBX: URI dialing, should not be case sensitive and numbers should be possible ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=89326 89326]
|}
needed for federation<br/><!--<br/>pbx.cpp<br/>-->
   
== IP222 IP232 IP241: LCD display is after softreset sometimes out of sync ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95866 95866]
|}
Displaycontroller needs to be stopped before restart.<br/><br/><!-- orchid_lcd.cpp  -->
   
== Httpclient: Problems with HTTPS URLs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96099 96099]
|}
Shortcut to local file I/O did not work fot HTTPS URLs.<br/><br/><!--<br/>httpclient_i.cpp<br/>-->
   
== phone: do not report "No Media Data received" errors for connections to a recording device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96102 96102]
|}
some recoding devices, for example ASC never send data on a recording connection<br/><br/><!-- phonesig.cpp,sip.cpp -->
   
== IP-DECT: Possible no media in case of media renegotiation after handover ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96124 96124]
|}
The problem happened in about 50% of the cases of a media renegotiation which results in a different coder after handover.<br/><!--<br/>dectradio_dectcall.cpp<br/>-->
   
== IP-DECT: Show release state in IP1202 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96157 96157]
|}
The release state is not shown in the IP1202. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>config.h<br/>-->
   
== SIP: Must not answer "refresher=uac" if request contains "refresher=uas" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96167 96167]
|}
Interop issue with Genband C20 PBX.<br/><br/>Must not answer<br/>    Session-Expires: 400;refresher=uac<br/>in 200/OK, if INVITE contains<br/>    Session-Expires: 400;refresher=uas<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX Trunk: "Outgoing Calls restricted" did not work correctly, Presentation restricted was set, but number could be wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96200 96200]
|}
For example if an analog Gateway was registered to a PBX user, and this Gateway did not send a Calling Party Number with the call, the call was sent with Presentation restricted, but without digits. This could affect Billing Applications which are based on CDRs from the Gateway.<br/><!--<br/>pbx_trunk.cpp<br/>-->
   
== phone: ip222,ip232: inbound calls automatically connected to Plantronics Savi W440/740/745 headsets with new firmware Versions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96276 96276]
|}
reported for:<br/>- Savi W440 with firmware 0118 on USB/DECT Dongle D100<br/>- Savi W740/745 with firmware 0115<br/><br/>reason:<br/>the newer firmware versions reject truncated output reports (no trailing 0 bytes) with STALL. The error handling for this case was wrong and caused an autoconnect.    <br/><br/><!-- keys_ip222.cpp, usb_host_if.h, ohci.cpp, ohci.h, usb_hid.cpp, usb_hid.h,  usb_audio.cpp, usb_audio.h usb_msd.cpp, usb_msd.h, ip233_host.cpp, ip233_host.h -->
   
== IP-DECT: Wrong GK id of standby Master to Mobility Master ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96302 96302]
|}
The standby Master uses a wrong gatekeeper id to register to the Mobility Master. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectmaster.h<br/>dectmaster.cpp<br/>-->
   
== PBX-CDRs: Conference ID missing in CDRs created by Mobility data callback/callthru ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96399 96399]
|}
This caused these calls not to show up in the reporting<br/><!--<br/>pbx_mobility.cpp<br/>-->
   
== PBX: Unexpected behaviour if too many filter were configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96416 96416]
|}
No new filters were accepted without error message<br/><!--<br/>pbx_admin.cpp<br/>servlet.h<br/>-->
   
== IP22 IP24 IP28 IP302 IP305: Sporadic DSP host interface overruns ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96606 96606]
|}
On the small gateways the DSP hangs if control packet on host interface arrive too fast. Now the rate is limited.<br/><br/><!-- ac_494.cpp ac_494.h  Queue „hnlich wie bei AC494E -->
   
== License download not working ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96622 96622]
|}
License download stops.<br/>Licenses are not downloaded.<br/><br/><!--<br/>license.cpp<br/>-->
   
== PBX: Changing of PBX Object Name did not change the name to be used for registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96634 96634]
|}
So if the name of the PBX registering as slave was changed as well, it did not register anymore. The PBX object had to be deleted and created with new name.<br/><!--<br/>pbx_admin.cpp<br/>pbx_edit_loc.xsl<br/>-->
   
== Gateway: FAX interface on IPVA ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96660 96660]
|}
The FAX interface on IPVA can not connect to a remote device because of wrong protocol events. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>facsimile_def.h<br/>-->
   
== SRTP: One way audio after some minutes on IP6000 IP2000 IP6010 IP0010 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96673 96673]
|}
Applies to v9hotfix21 on IP6000, IP2000, IP6010, and IP0010.<br/><br/>Collateral damage from fix #91892: SRTP: Avoid one-way media with high start sequence numbers.<br/><br/><!--<br/>cipher_api.cpp<br/>mv78x00_crypt.cpp<br/>-->
   
== Gateway: CGPN-Maps executed even if the Routing was already completed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96685 96685]
|}
A CGPN map, which was configured in a route following the route, which was actually executed was executed as well.<br/><br/>This was a collateral damage from fix: #93400: Gateway: CGPN-Maps executed even if the Route did not match in case of enbloc calls<br/><!--<br/>gk.cpp<br/>-->
   
== IP22 IP24 IP28 IP302 IP305: Sporadic DSP host interface overruns - CLIP disabled, new trace option ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96716 96716]
|}
On the small gateways the DSP hangs in some conditions.<br/>Now the trace-stop is replaced with an Assert to recover from this situation.<br/><br/>To get a trace of this condition a new trace option is added at dsp.xsl, called txt-trace. This traces the DSP message as text, so that they can be read out after a trap.<br/>Typical usage is to enable DSP-trace, DSP control messages DSP data messages and DSP txt trace.<br/>DSP pcm trace and DSP T38 trace should be off to avoid excessive debug load.<br/><br/><br/>Also, the CLIP messages are disabled since they caused problems in the past.<br/><br/><br/><!-- ac_494.cpp ac_494.h ac_dsp3.cpp trace.xsl gk.cpp -->
   
== H.323: One-way-voice if SRTP call to a Waiting queue is forwarded via Waiting Queue Maps to a phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96721 96721]
|}
This is a problem with SRTP key exchange, which could happen in other traffic scenarios as well.<br/><!--<br/>h323ch.cpp<br/>-->
   
== IP-DECT: Web UI administrator user list removed on IP1202 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96726 96726]
|}
The Web UI administrator user list is removed on the IP1202 now.<br/><br/><!--<br/>Changed files:<br/>httpfiles.mak<br/>_inn_asc_dect_users_right.xsl<br/>-->
   
== IP28: Click sounds at caller side when calling ip28 gateway ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96782 96782]
|}
<!--<br/>si3241_drv.cpp<br/>si3241_drv.h<br/>-->
   
== IP28: Sometime Ringing stopped working on an anlog port. Worked again only after reset. ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96787 96787]
|}
This happened due to low ringing volatge, the default value of "low" on the interface configuration for the ringing voltage caused this to happen.<br/><!-- si3241_drv.cpp -->
   
== IP28: Ring voltage failure (RING_FAIL) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96826 96826]
|}
<!--<br/>si3241_drv.cpp<br/>si3241_drv.h<br/>-->
   
== IP22 IP24 IP28 IP302 IP305: Sporadic DSP host interface overruns - Updated DSP code ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96852 96852]
|}
Clip enabled on all channel.<br/><br/><!-- ac_dsp3.cpp ac_dsp3.h ac494.cpp ip24.mak -->
   
== phone: ip222,ip232,ip241: Local Network Coder default for User-2..6 was G711 instead of G722 as for User-1 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96890 96890]
|}
WEB-Interface "Phone/User-2..6/General/Options/Local Network Coder" was preset to G711 instead to G722 as for User-1. <br/><br/><!-- phone_user_ui.cpp, phone_user_ui.h -->
   
== PBX: New option for RTP Proxy - proxy only if different registration address ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88439 88439]
|}
To avaoid RTP Proxy for two endpoints located within same private network behind NAT<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_general.xsl<br/>-->
   
== PBX Executive: Allow monitoring of availability of secondary secretary, don't  treat Exec as secretary ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=95497 95497]
|}
With these two additions a configuration with two executives and two secretaries, each secretary being primary to one executive an secondary to other can be configured with a single group for each secretary and both executives can monitor the availability of both secretaries.<br/><!--<br/>pbx_exec.cpp<br/>--->
   
== SIP: Workaround for buggy registrar ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96313 96313]
|}
Workaround for buggy registrar.<br/>Different expirtes values in Contact header and Expires header.<br/><br/>\tSIP/2.0 200 OK<br/>\tVia: SIP/2.0/UDP x.x.x.x:2069;rport=2069;branch=z9hG4bK-CDDD130C<br/>\tTo: ;tag=5b8729d5-6f6353c4-cbsxz<br/>\tFrom: <sip:38795988@193.90.37.3>;tag=2109370043;epid=0090331e0bef<br/>\tCall-ID: 7ef63c56e909d311b3890090331e0bef@95.130.221.205<br/>\tCSeq: 1004 REGISTER<br/>\tExpires: 60<br/>\tContact: <sip:38795988@x.x.x.x:2069;transport=UDP>;expires=300<br/>\tUser-Agent: ZTE-SBC<br/>\tX-ZTE-Cause: "SBC-4721-2002"<br/>\tContent-Length: 0<br/><br/>Better apply the smaller expires value.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX: Send forking calls as diverted calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96370 96370]
|}
So that on the called side, it will be displayed who forked the call the same way as a diverted call is displayed.<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX: pbx_makecall.txt not only for mobility, but for Waiting Queue also ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96384 96384]
|}
Allows to initiate call with simple web request from a Waiting Queue<br/><!--<br/>pbx_admin.cpp<br/>-->
   
== IP-DECT: Physical location was wrong after logout/login on handset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96392 96392]
|}
The physical location information is based on the redirection of the registration from the PBX at the physical location to the registration PBX. Some information was not cleared with the logout, so re-registration startet with the registration PBX right away.<br/><!--<br/>h323sig.cpp<br/>-->
   
== phone: if a number to be dialled contains a comma, the digits following the comma are sent as DTMF tones after connect ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96402 96402]
|}
This applies to all numbers dialed en bloc, i.e. numbers dialed via indirect dialing, a phone directory or a function key. The comma must not be the first character of the number. <br/><br/><!-- phonesig.cpp -->
   
== IP-DECT: OEM PBX type info in GUI data ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96723 96723]
|}
Now the GUI data includes the type info of an OEM PBX.<br/><br/><!--<br/>Changed file:<br/>dectusers.cpp<br/>-->
   
== IP22 IP24 Ip28 IP302: Don't complete media negotiation for ab-interfaces if no media can be sent ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96773 96773]
|}
For incoming calls to a phone media negotiation was already completed during ringing, so that when going off hook the media channel was already established. This causes interop problems, because there are endpoints which asssume there is inband info (e.g. ringback) if media negotiation is complete so local tones (e.g. ringback) were turned off.<br/><br/>In the past with slowstart this premature media negotiation was usefull to avoid delayed media after off-hook. With SIP or H.323 faststart there is no use anymore.<br/><br/>Needed to avoid that the DSP send CLIP and tones at the same time, which can cause sporadic DSP failures.<br/><br/><!-- ab_sig.cpp -->
   
== SIP: New interop tweak /register-interval ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97834 97834]
|}
New config file option /register-interval 60<br/>Problem is too weired to explain.<br/>This option can be used to set the REGISTER interval to a fixed value regardless of the negotiation.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
= V9 Hotfix 23 (9061252) =
Changes included in Version 9 hotfix23<!---->
[http://mantis.innovaphone.com/view.php?id=96632 Definition]
 
 
   
== SUBSCRIBE for MWI not correctly handled after change of IP address ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96898 96898]
|}
SUBSCRIBE for MWI not correctly handled after change of IP address<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: ip222,ip232: USB headset echo effects in call setup phase when a G722 call is started by a CTI application ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96974 96974]
|}
The caller hears the calling tones and it's own speech from the headset microphone but the callers speech is not transmitted to the called party.<br/><br/><!-- ac_phone3.cpp --> 
   
== H.323: Offered packetization should be honored for SIP interoperability ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=96983 96983]
|}
Problem happend with calls from Samwin CBC<br/><!--<br/>h323ch.cpp<br/>h323ch.h<br/>-->
   
== RTP-DTMF: Must increase duration field when sending RTP-Event with END marker ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97001 97001]
|}
Must increase duration field when sending RTP-Event with END marker to comply with RFC.<br/><br/><!--<br/>media.cpp<br/>-->
   
== ASN.1 BER: Decoding of Sequence Member with indefinite length failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97072 97072]
|}
An Avaya supplementary service couldn't be decoded<br/><!--<br/>asn1_ber.cpp<br/>-->
   
== H.323: Channel Close sometimes not sent on hold ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97080 97080]
|}
Esspecially on the second hold within a call the Channel Close was not sent to the party, which put the other on hold. This caused the channel not beeing turned off on this side (the other side receives music on hold in this case)<br/><!--<br/>h323ch.cpp<br/>channel.h<br/>channel.cpp<br/>-->
   
== IP4 did not work anymore when IP6 was disabled  via WEB interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97111 97111]
|}
When the "IP6/ETNx/IP6/Options/Disabled" was checked the IP4 operations did stop after a while.<br/><br/><!-- ip6_ethif.cpp -->
   
== phone: ip222,ip232: Plantronics Savi W440 dosn't report Talk-Key events in a call established at phone or by a CTI application ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97115 97115]
|}
When a call via this headset was initiated/accepted by the Redial-Key, the Headset(Mode:Control) function key or a CTI application, the call could not be disconnected by pressing the Talk-Key at the headset because the Headset did not report this action.<br/><br/><!-- keys_ip222.cpp --><br/>
   
== phone: DTMF digits following a comma in a number to be dialed were not handled correctly in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97150 97150]
|}
- in the "Destination Number" configured under "Phone/Direct Dialing" in conjunction with a nonzero "Autodial Timeout":  the DTMF digits were sent as dial digits<br/>- with a nonzereo "Enblock Dialing Timeout" configured under "Phone/User x/General/Options": sending of DTMF digits was delayed by the configured timeout\t
   
== Gateway: FAX interface on IP800/IP305/IP302 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97571 97571]
|}
Fix for the last fix #96660.<br/>The FAX interface on the IP800/IP305/IP302 can not connect to a remote device because of wrong protocol events. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>facsimile_def.h<br/>--><br/>
   
== H.323: Fast Unregister/Register operations could lead to failed registrations, in case of fixed signaling ports ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97637 97637]
|}
A listening socket could still be in use. Only happened with IP-DECT and multi-master.<br/><!--<br/>h323sig.cpp<br/>h323.h<br/>-->
   
== H.323: Trap when Name-Id of more the 128 characters is to be forwarded ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97639 97639]
|}
buffer overrun happened<br/><!--<br/>h450.cpp<br/>-->
   
== PBX: Name-Id of busy destination was not forwarded to other PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97646 97646]
|}
Display was different when calling a busy phone on local PBX or on another PBX<br/><!--<br/>pbx.cpp<br/>-->
   
== IP22 IP24 IP28 IP302 IP305: ASSERT on DSP queue overrun added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97653 97653]
|}
<!--  ac494.cpp  -->
   
== phone: "Prepare Override" function key did not work since V9hotfix21, the overriding source address was ignored ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97665 97665]
|}
<!-- phonesig.cpp -->
   
== SIP: Trap when terminating a call while re-negotiation is ongoing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97675 97675]
|}
Trap when terminating a call while re-INVITE is pending.<br/><br/><!--<br/>siptrans.cpp<br/>-->
   
== phone: ip230,ip240,ip241 :  unefined codes received from a DHSG Headset basestation were misinterpreted as Hookswitch indication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97732 97732]
|}
sometimes DHSG Headset basestations send codes not defined for DHSG which are silently discarded now. <br/><br/><!-- keys_gen.cpp -->
   
== H.323: Potential Trap when reconfiguring an H.323 registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97820 97820]
|}
This is a collateral damage from<br/><br/>91815: IP-DECT: Static ports between Master and Radio<br/><!--<br/>h323sig.cpp<br/>-->
   
== PBX Executive: Calls with calling id restriction and without calling id, were sent to executive, even if secretary available ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97897 97897]
|}
This happend for calls coming in from public ISDN with calling id presentation restriction thru a trunk object without number<br/><!--<br/>pbx_exec.cpp<br/>-->
   
== SIP: Trap when using STUN ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97898 97898]
|}
Trap when using STUN.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Dialog-Info was encoded with wrong state attribute ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97926 97926]
|}
Dialog-Info was encoded with wrong state attribute "full".<br/>Must be "partial".<br/><br/><!--<br/>sip_dialog_info.cpp<br/>-->
   
== SIP: Logging was wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98037 98037]
|}
Logging was wrong.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== PBX: Potential trap when receiving unknown presence activity ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98043 98043]
|}
In the respective version unknown activities are mapped to "busy"<br/><!--<br/>fty.cpp - rollback of this change<br/>h450.cpp<br/>-->
   
== PBX Waiting: timeout argument for pbx_makecall.txt URL ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97010 97010]
|}
A timeout argument was added to the PBX0/ADMIN/pbx_makecall.txt URL to cancel an outgoing call initiated with this URL.<br/><!--<br/>pbx_admin.cpp<br/>pbx_api.h<br/>pbx_wait.cpp<br/>pbx_wait.h<br/>pbx_xml.cpp<br/>pbx_xml.h<br/>pbx_bc_conf.cpp<br/>pbx_bc_conf.h<br/>-->
   
== ISDN: Send legacy Redirecting Number for 'old' Fax Servers ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97615 97615]
|}
The redirecting number is an old style information element, which contains part of the information as the diverting leg2 facility. Some Fax Servers do not understand the leg2 facility.<br/><!--<br/>q931.h<br/>q931.cpp<br/>nt_tbl.h<br/>signal.cpp<br/>signal.h<br/>relay.cpp<br/>-->
   
== PBX-CDRs: Better CDR for pickup ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97681 97681]
|}
A pickup was not indicated in the CDRs<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX-SOAP: Status of Boolean object indicated as local number ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97738 97738]
|}
When monitoring a Boolean object with SOAP a call is indicated. The local number of this call is set based on the status of the boolean object (00 automatic-off, 01, automatic-on, 10 - manual-off, 11 - manual-on)<br/><!--<br/>pbx_bool.cpp<br/>-->
   
== PBX-SOAP: UserPark allows to park to another object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=97741 97741]
|}
The argument 'cn' was ignored in v9 and earlier, now it can be used to identify a destination for the park.<br/><!--<br/>pbx_xml.cpp<br/>-->
   
= V9 Hotfix 24 (9061271) =
Changes included in Version 9 hotfix24<!---->
[http://mantis.innovaphone.com/view.php?id=98531 Definition]
 
 
   
== IPVA: Unused ETH1 Could Cause Out-Of-Memory Situation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98179 98179]
|}
Outgoing packets could queue up without ever getting purged.<br/><!--<br/>vlance_drv.cpp<br/>vlance_drv_s.xsl<br/>-->
   
== SIP: Trap - not checking array boiundaries ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98219 98219]
|}
Trap - not checking array boiundaries when processing User-Agent header.<br/><br/><!--<br/>sipmsg.cpp<br/>-->
   
== SIP: STUN not working ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98223 98223]
|}
STUN not working if STUN server IP address is configured.<br/>No problem if if STUN domain name is configured.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: ip222,ip232: USB connection sometimes lost until reboot ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98290 98290]
|}
Observerved with with headsets from various manufacturers. Most probably caused by strong electrostatic discharges to the USB connection cable. In such case also unplugging/plugging of the headset was not noticed by the driver anymore.<br/><br/><!-- ohci.cpp ohci.h -->
   
== Logging: "Alarm and Event Forward Server" address could not be changed anymore once configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98457 98457]
|}
<!-- logging.xsl -->
   
== LDAP Replication: ASN.1 Decoding Failed For More Than 100 Attributes Per Object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98468 98468]
|}
Happend with 100 attributes in a PBX stored phone configuration.<br/><!--<br/>ldapsrv.cpp<br/>ldapdir.cpp<br/>-->
   
== Corrupt trap buffer when tracing UART messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98533 98533]
|}
<!-- uart_drv.cpp -->
   
== IP232,IP222: Confirming blind transfer with redial key did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98591 98591]
|}
Short user guide:<br/><br/>  Press 'redial' before accepting the call, enter telephone<br/>  number for the call diversion and confirm by pressing 'redial' again.<br/><br/><!--<br/>app_ctl.cpp<br/>-->
   
== phone: ip222,ip232: USB headset media connection lost after a release received from a remote conference peer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98600 98600]
|}
Happened only on a release of the call which was the active call when the conference was established. The remaining VOIP connection was OK but the media stream was not passed from/to headset anymore.<br/><br/><!-- ac_phone3.cpp ac_codec3.cpp -->
   
== IP241: DHSG Headset messages are sometimes wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98642 98642]
|}
<!-- orchid_lcd.cpp orchid_lcd.h config.h --><br/><br/>Beim Neuladen des Sequencers bei Žnderung der LCD-Helligkeit kommt der UART-Takt gelegentlich zu schnell. Besser noch w„re 2 sequencerprogramme zu definiere, aber wie das geht ist nicht im Orchid/Titan Usermanual nicht offensichtlich -->
   
== SIP: SDP version not increased when answering an offer where only media-mode has changed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98739 98739]
|}
If remote side changes from 'sendrecv' to 'inactive'<br/>the SDP answer follows this change of media-mode,<br/>but SDP version was not increased.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Gatway: Configuration of Blockdial Timeout at Routes did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98748 98748]
|}
Wrong value was calculated, if multiple maps were used in a single route blockdial timeout configuration of a map was lost, when another map was configured.<br/><!--<br/>gk.cpp<br/>-->
   
== enabled state of an external directory configured via a PBX config template was lost in some cases, ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98816 98816]
|}
This did happen for example when<br/>- a second phone was registered to the same PBX user (twin phone)<br/>- a "Phone/Reset/Reset User Specific Configuration" was done via the phones WEB GUI (but not when this was done via the PBX GUI)<br/><br/><!-- phone_edit.cpp phone_user.cpp phone_user_ui.cpp -->
   
== SIP: Trap when sending &lt;dialog-info&gt; ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98902 98902]
|}
Trap when interworking group-indications into dialog-info.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Memory Leak when deleting voicemails ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98929 98929]
|}
A list wasn't cleaned<br/><!--<br/>pbx_vm.cpp<br/>vm_script_if.cpp<br/>test\\9.00\\pbx\\vm\\vm-box-to-box\\vm\\cf-files\\vm-listfiles.xml<br/>-->
   
== IP222 IP232: Noise in the microphone at 6400Hz ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98941 98941]
|}
.<br/><!-- ac_codec.cpp platform/filter/ip222_mic_*.* -->
   
== IP222 IP232 IP241: Codec register debugs added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98972 98972]
|}
Codec register debugs are enabled with dsp  trace.<br/>Codec register are dumped after changes to analyse Manits 97903 <br/><!-- ac_codec3.cpp -->
   
== PBX: No config updates were sent to the phones, when selection of templates was changed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98983 98983]
|}
When the config of the template itself was changed an update was sent, but if it was changed which templates were used on a user object, no update was sent.<br/><!--<br/>pbx.cpp<br/>-->
   
== Phone: Could not configure fkey labels containing single quotation mark ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98986 98986]
|}
Could not configure fkey labels containing single quotation mark.<br/><br/><!--<br/>phone_edit.cpp<br/>-->
   
== myPBX: Missed calls for mobility calls accepted somewhere else ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98995 98995]
|}
A cause code was missing in CDRs generated by mobility<br/><!--<br/>pbx_mobility.cpp<br/>-->
   
== PBX Mobility: No DTMF R-Key Features possible after data callback ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99020 99020]
|}
For a mobility call, which was established with data callback no DTMF R-Key Features (e.g. put the call on hold) were possible.<br/><!--<br/>pbx_mobility.cpp<br/>-->
   
== SIP: Switch-over to t38 did not work in one configuration scenario ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99130 99130]
|}
Interworking of SIP and H.323.<br/>Switch-over to t38 did not work if both Gateway interfaces were configured to media-relay with exclusive audio codec.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: ip222,ip232: ignore  HID function of USB headset charging cables ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99133 99133]
|}
Some USB headset charging cables present a HID function as long as the headset is connected to the cable (probably used for headset firmware updates).<br/>Dependent on the enumeration sequence the HID function of the cable could hide the HID function of the headset when the headset base station (or the bluetooth or DECT dongle) is plugged in paralll to the phone.<br/><br/><!-- usb_host_if.h ohci.h ohci.cpp usb_hid.cpp usb_audio.cpp -->
   
== IP22 IP24 IP28 IP302 IP305: ASSERT on DSP queue overrun added (2) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99155 99155]
|}
<!--  ac494.cpp  -->
   
== H.323: Alternate Registration to IP address did not work, if primary used Discovery ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99228 99228]
|}
If the registration to the primary destination, which used discovery failed, the alternate registration to IP address was sent to the discovery port (1718) instead of the registration port (1719).<br/><!--<br/>h323sig.cpp<br/>-->
   
== phone: ip222,ip232: support USB headsets with two audio input channels from microphone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99290 99290]
|}
First seen with a Plantronics Blackwire C320 (one of the cheapest wired models) <br/><br/><!-- usb_audio.cpp -->
   
== PBX Mobility: Trap if calling from a slave to an object at the master, with mobility destination on the same slave ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99400 99400]
|}
Null pointer access happend<br/><!--<br/>pbx_mobility.cpp<br/>pbx.cpp<br/>-->
   
== IP22 IP24 IP28 IP302 IP305: Sporadic DSP host interface overruns - Tonegeneration fixed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99403 99403]
|}
Simultaneous tone generation and caller id generation caused DSP problem on analog gateways.<br/><br/>Tone generation with undefined coder disabled to avoid this problem.<br/><br/><!-- ac_dsp3.cpp -->
   
== phone: ip222,ip232: "Phone/Preferences/Use Handset like a Headset" mode did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99414 99414]
|}
on an ip2x2 only the headset function key (Mode:Control) can be used to to start an outbound call or to accept an inbound call in this mode but the headset function key was ignored when no headset was plugged/enabled.
   
== SIP: Handling of 180 with SDP answer is required after 180 without SDP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99428 99428]
|}
A 180 with SDP answer must be processed after 180 without SDP has already been received.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP232,IP222,IP241: Rendering error on fkeys during hotdesking ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99446 99446]
|}
Bad pixels right of fkey during hotdesking.<br/>But only at fkeys with icon.<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== SIP: Must re-create message-summary subscription after re-connecting to server after local address change ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99488 99488]
|}
Must re-create message-summary subscription after re-connecting to server after local address change.<br/>Must not re-use call-id and tags for re-subscription.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: ip222,ip232: prevent unintentional autoconnect of an inbound call arriving while the headset radio link runs down ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99497 99497]
|}
This happens when another call was just released and the new call arrives while the phone is in idle state but the headset base is running down the radio link.<br/><br/><!-- keys_ip222.cpp -->
   
== Phone: NOTIFY(sipfrag) was missing after transfer complete ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99535 99535]
|}
When call replacement (REFER) is completed a NOTIFY(sipfrag:200/OK) must be sent to the sender of REFER (transfering party).<br/><br/><!--<br/>phonesig.cpp<br/>-->
   
== Phones: Allow changes to language, ringtones and fkeys if "Allow User Settings at Phone" is activated ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99548 99548]
|}
Allow changes to language, ringtones and fkeys if "Allow User Settings at Phone" is activated.<br/><br/><!--<br/>phone_user_config.cpp/h<br/>-->
   
== PBX: Trap with operator searches and objects with 'Hide from LDAP' and multi-level nodes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99557 99557]
|}
An endless loop happened, which caused the PBX to restart.<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX Mobility: Call Waiting Facility was missing for waiting calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99572 99572]
|}
A caller could not see that his call was waiting<br/><!--<br/>pbx_mobility.cpp<br/>-->
   
== PBX: No Registration redirect back to original PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99579 99579]
|}
This could happen with a config error or during startup when not all objects are read.<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>-->
   
== H.323: Fallback to Slowstart after CFNR did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99600 99600]
|}
If a CFNR to a Slowstart endpoint (e.g. XCAPI) was performed after a call to an EFC endpoint, the fallback to slowstart did not work in a szenario with multiple PBXs.<br/><!--<br/>h323ch.cpp<br/>-->
   
== phone: ip222,ip232: delay ringing to USB headset when a previous call was released immediately before ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99616 99616]
|}
Some USB headsets (even wired ones) need a surprisingly long time to disconnect (up to 500 millisecons). To play the ring tone the headset must be connected again and this may fail before the disconnect is completed.<br/>The default delay is one second from start of last disconnect, it can be set by<br/>  config add PHONE APP /usb-calm <ticks><br/>where <ticks> means 20 ms timer ticks.<br/>
   
== phone: ip222,ip232: minimize delays in audio stream connect/disconnect operations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99625 99625]
|}
<!-- usb_audio.h usb_audio.cpp -->
   
== PBX: CFNR/CFB on PBX object did not work in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99674 99674]
|}
The number appended to the call when the forwarding was executed was not correct sometimes<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>-->
   
== phone: ip222,ip232,ip241: send RTP data to network after hold/retrieve even if remote party does not send ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99682 99682]
|}
<!-- ac_phone3.cpp ac_phone3.h -->
   
== IP-DECT: Default boot code file name of the IP1202 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99688 99688]
|}
Now the default boot code file name used by the update script is correct.<br/><br/><!--<br/>Changed file:<br/>dect_comcerto.cpp<br/>-->
   
== phone: ip222,ip232: Plantronics DA45 with new firmware version (0090) did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99724 99724]
|}
The new firmware rejects commands with STALL which were accepted by the older firmware (the commands were sent with trailing zeros which were silently ignored). This may also apply to Blackwire C420 / C435 / C620 which use the same firmware. 
   
== SIP: Display name of "original called party" was missing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99739 99739]
|}
Display name of "original called party" (first diverting party) was missing in case there were multiple diversions.<br/>When processing INVITE with (multiple) History-Info header.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: ip222, ip232: support Jabra UC Voice 750 and Jabra Speak 510 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98092 98092]
|}
<!-- keys_ip222.cpp -->
   
== IPVA: ETHx Transmit Queue Size Limited To 1MB ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98187 98187]
|}
Was unlimited<br/><!--<br/>vlance_drv.cpp<br/>-->
   
== Linux: Shutdown warning message ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98438 98438]
|}
If Linux is running, a shutdown warning message is shown at the Linux General page now.<br/><br/><!--<br/>Changed file:<br/>linux.xsl<br/>-->
   
== SIP/TLS: Using domain name as fall back to proxy name when comparing to the certificat "subject" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98643 98643]
|}
Using domain name as fall back to proxy name when comparing to the certificat "subject".<br/><br/><!--<br/>siptrans.cpp<br/>-->
   
== Voicemail: Allow SMTP Email Port Different Than tcp/25 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98683 98683]
|}
eg in email.xml: ..smtp.foo.bar:888..<br/><!--<br/>smpt_mta.cpp<br/>-->
   
== phone: directory search highlights first matching entry if the search expression contains any non numeric digit ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98806 98806]
|}
To prevent unintended dialing of a directory entry starting with numeric digits the search expression was checked if it consists of dialable digits (0-9*#,) only.<br/>In this case the first matching entry was not automatically highlighted (activated) so that the input (number) could be dialled by going off-hook. <br/>Now the check includes the numeric digits (0-9) only. 
   
== SIP: New interop tweak /accept_any_reg_interval ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98887 98887]
|}
For endpoints that do not read the expires value from 200/OK response to REGISTER.<br/>E.g. "User-Agent: TRBOnet.Enterprise"<br/><br/><!--<br/>sip.cpp<br/>-->
   
== phone: ip222,ip232: support Plantronics Blackwire C320 / C520 / C720, Voyager Legend UC, Calisto 620 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99112 99112]
|}
<!-- keys ip222.cpp -->
   
== Gateway: Only transparent (clearmode) coder in offer if data call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99234 99234]
|}
This is a SIP interop issue. Some equipment cannot ignore clearmode coder offers, if not supported.<br/><!--<br/>channels.cpp<br/>-->
   
== SIP: New interop tweak /c-line-at-session-level ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99237 99237]
|}
New interop tweak /c-line-at-session-level for clients that do not read RTP address from media description.<br/>For clients not compliant to RFC-4566.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== phone: a park function key with both 'Number' and 'Name' left empty implies to use 'Number' or 'Name' of the Registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99387 99387]
|}
The key works the same way as a key with an explicitely configured 'Number' or 'Name'.
   
== phone: volume of pickup notification tone is set according to the volume configured for internal ring tone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99424 99424]
|}
If the user prefers a different setting the automatically derived volume can be overridden with a fixed volume as before via<br/>    config add PHONE SIG /notify-pickup-gain <gain><br/>( see http://wiki.innovaphone.com/index.php?title=Howto:Change_the_volume_of_the_pickup_key_audio_notification )<br/><br/><!-- phonesig.cpp app_fkey.cpp phone_edit.cpp inca_afe.cpp -->
   
== phone: flag to disable speaker key to prevent conversations in handsfree mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99555 99555]
|}
set via <br/><br/>config add PHONE APP /no-speaker-key<br/><br/><!-- app_cfg.cpp app_cfg.h app_form.cpp -->
   
== PBX Mobility: Dial thru ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99780 99780]
|}
When calling the Mobility object from the mobile phone, additional dialed digits are used to call the destination. This is an alternative to using DTMF for dialing. How many digits may be dialed depends on what the network of the mobile phone supports<br/><!--<br/>pbx_mobility.cpp<br/>-->
   
= V9 Hotfix 25 (9061282) =
Changes included in Version 9 hotfix25<!---->
[http://mantis.innovaphone.com/view.php?id=99848 Definition]
 
 
   
== PBX: Admin rights restriction was not displayed after Apply anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99987 99987]
|}
If an admin had restrictions for PBX oder Node, this retrcition was not shown after pressing Apply when editing an object.<br/><!--<br/>pbx_admin.cpp<br/>pbx:admin.h<br/>-->
   
== SIP: Problems on media negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100107 100107]
|}
Problems on media negotiation when CFNR is executed by PBX<br/>on an incoming SIP call without SDP offer.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP22 IP24 IP28 IP302 IP305: Sporadic DSP host interface overruns - Updated DSP code ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100128 100128]
|}
DSP code 680.12.pf.01.  Assert if DSP is not responding added<br/><br/><!-- ac494.cpp  -->
   
== PBX: Case insensitive search for PBX objects did not work for non-ascii characters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100195 100195]
|}
No result was found when searching with lower case and Name contained upper case<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX: When counting calls to slave PBXs, subscriptions were counted as well ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100203 100203]
|}
Only calls with media should be counted<br/><!--<br/>pbx.cpp<br/>-->
   
== AD Replication: Mapping yielding empty CN caused 100% cpu load ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100209 100209]
|}
A detection for data differences was by-passed.<br/><!--<br/>flashdir.cpp<br/>-->
   
== SIP: Don't use uri scheme "sips" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100210 100210]
|}
Don't use uri scheme "sips" even when using TLS as transport.<br/>"sips" is not accepted by MS LYNC.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== Media: NAT workaround was activated during transfer in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100338 100338]
|}
NAT workaround was activated during transfer in some cases.<br/>Late packets from transferring endpoint may trigger the NAT workaround at the 2 transferred endpoints, making the transferred endpoints redirecting to the obsolete RTP addr/port of the transferring endpoint.<br/><br/><!--<br/>medialib.ccp/h<br/>-->
   
== Replication: Distribution Of Trace Flag To Existing Connections ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100383 100383]
|}
Prior to this fix a reboot was necessary to see all trace-output.<br/><!--<br/>adrep.cpp<br/>innorep.cpp<br/>-->
   
== Phone: Distinctive ringing of emergency calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100490 100490]
|}
Distinctive ringing of emergency calls.<br/><br/><!--<br/>sip.cpp<br/>phonesig_if.h<br/>phonesig.cpp<br/>q931lib.cpp/h<br/>-->
   
== I6000 IP2000 Allow changing SRTP key while data is queued for encryption ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100549 100549]
|}
Bug in the crypto crypto driver. When the SRTP key is changed while a packet is being encrypted the SRTP socket hung up.<br/><br/><!--<br/>srtp_cipher.cpp<br/>-->
   
== IP-DECT: Call transfer timeout ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100603 100603]
|}
The call transfer timeout is changed to 25s for transfer to mobile targets. Used by OEM PBXs.<br/><br/><!--<br/>Changed file:<br/>dectradio_call.h<br/>-->
   
== myPBX: Add node escape prefix to number from PBX LDAP directory ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100698 100698]
|}
Internal numbers might differ depending on the caller, due to node membership. So the internal number has to be adapted for the individual users.<br/><!--<br/>pbx_api.h<br/>pbx.h<br/>pbx.cpp<br/>pbx_client.h<br/>pbx_client.cpp<br/><br/>test\\10.00\\unit-tests\\client\\iteration05\\160-int-search-other-node.xml<br/>test\\10.00\\unit-tests\\client\\iteration05\\161-int-search-other-node-escape.xml<br/>-->
   
== SIP: No INVITE is sent if client has registered with a local domain name ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100728 100728]
|}
No INVITE is sent if client has registered with a local domain name instead of ip address.<br/><br/>E.g.<br/><br/>\tREGISTER sip:172.16.16.124 SIP/2.0<br/>\tVia: SIP/2.0/UDP kws6000.noexist.local:5060;branch=z9hG4bK40ce4a47e899<br/>\tFrom: ;tag=40b10bdf37c5<br/>\tTo: <sip:sga@172.16.16.124><br/>\tCall-ID: 4040c07c656162185bf6d53451f1ecae<br/>\tCSeq: 387119859 REGISTER<br/>\tContact: <sip:sga@kws6000.noexist.local><br/>\tAuthorization: Digest username="sga", realm="172.16.16.124",...<br/>\tAllow: OPTIONS, INVITE, ACK, CANCEL, BYE, SUBSCRIBE, NOTIFY,...<br/>\tMax-Forwards: 70<br/>\tUser-Agent: KIRK Wireless Server 6000 PCS13__ r40453<br/>\tSupported: replaces<br/>\tSupported: 100rel<br/>\tExpires: 60<br/>\tContent-Length: 0<br/><br/><br/><!--<br/>sip.cpp<br/>-->
   
== H.323: No media after Hold/Retrieve on call with multiple media-relay ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100823 100823]
|}
This could be considered a mis-configuration, because a single media-relay should be good enough, but should work anyway.<br/><!--<br/>h323ch.cpp<br/>-->
   
== LDAP/Expert: Search Page-Size Now 50 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100847 100847]
|}
was 100<br/><!--<br/>flashdirui_left.xsl<br/>flashdirui_right.xsl<br/>flashdirui_edit.xsl<br/>flashdirui.cpp<br/>-->
   
== NTP-Server: use destination address  from client request as source address in response to client ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100940 100940]
|}
a response to a client request received via ETH1 was sent with the ETH0 address as source address when routed through default gateway on ETH0.<br/>a response with a source address not matching the adressed server is discarded on client side.<br/><br/><!-- ntp.cpp -->
   
== Correctly distinct Quick Dial and Directory Search object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101020 101020]
|}
Sometimes die Quick Dial object became a Directory Search object, if the submit has been rejected.<br/><br/><!--<br/>pbx_edit_dirsearch.xsl<br/>pbx_edit_qdial.xsl<br/>-->
   
== Escape Mechanism for Flash Directory Objects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=99578 99578]
|}
The mechanism's motivation is to avoid unnecessary binary encodings and to spare some length per configuration line.<br/>http://wiki.innovaphone.com/index.php?title=Concept_Flash_Directory#Escape_Rule_For_Object_Values<br/><!--<br/>test/platform/platform.h<br/>test/test/os/test_os.h<br/>test/test/os/test_flashman.h<br/>test/test/os/test_flashman.cpp<br/>test/test.vcproj<br/>test/test/os/test_os.h<br/>test/common/interface/flash.h<br/>test/common/service/ldap/ldaplib.h<br/>test/common/service/ldap/ldaplib.cpp<br/>test/common/service/ldap/flashdirui.cpp<br/>test/common/service/ldap/flashdir.h<br/>test/common/service/ldap/flashdir.cpp<br/>-->
   
== phone: support transparent recording of calls to/from other registrations than the active registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100120 100120]
|}
If a registration is configured for 'transparent' recording a call via this registration is always recorded now even if the registration is not the 'active' registration and no recording is configured for the 'active' registration.<br/><br/><!-- phone_config.h phone_config.cpp phone_edit.h phone_edit.cpp fkey_edit_record.xsl app_ctl.h app_ctl.cpp app_call.cpp app_cc.cpp app_fkey.cpp phone_user_func.cpp -->
   
== SIP: Workaround for SIP client giving wrong ip address in Contact-URI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100822 100822]
|}
Workaround for SIP client giving wrong ip address in Contact-URI.<br/>3CXPhoneSystem gives ip address of PBX in Contact-URI.<br/>PBX sends upcoming SIP requests to its own ip address.<br/><br/><!--<br/>sip.cpp<br/>-->
   
= V9 Hotfix 26 (9061288) =
Changes included in Version 9 hotfix26<!---->
[http://mantis.innovaphone.com/view.php?id=101107 Definition]
 
 
   
== phone: ip110/150/230:- start  completion of a prepared dial string in 'numeric' keyboard mode if last char of string is numeric ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101082 101082]
|}
Pressing a 'Dial' function key whith 'Prepare' checked permits further editing of the string configured under 'Number' or 'Name'. The keyboard mode was set to 'alpha' if the string contained any character not permitted in an e164 number. Now the mode is set to 'numeric' when the last character of the string is a decimal digit.<br/><br/><!-- forms_ctrl_impl.cpp -->
   
== myPBX: Possible trap on configuring visibility and call diversions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101325 101325]
|}
<!--<br/>Function packet2args was used in a wrong way. This could end up in a buffer overrun of a single null byte.<br/>pbx_client.cpp<br/>--><br/>
   
== SIP: STUN server could not be removed from Gateway interface config without reboot ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101384 101384]
|}
STUN server could not be removed from Gateway interface config without reboot.<br/>It disappeard from config, but was still used by SIP interface.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== PBX: The checkmark "RTP Proxy - Except Addresses are identical or private" could not be cleared ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101421 101421]
|}
once set, this checkmark could not be unset<br/><!--<br/>pbx_general.xsl<br/>-->
   
== Gateway: Disabled routes were barely distinguishable from normal routes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101422 101422]
|}
Light gray background helps<br/><!--<br/>work.css<br/>-->
   
== PBX: Routing from one slave to another with multiple nodes and overlap dialing could fail ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101491 101491]
|}
Only under more special conditions<br/><!--<br/>pbx.cpp<br/>-->
   
== Linux: Network configuration reset message ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101492 101492]
|}
The reset needed message is sometimes missed if the network configuration for Linux is changed. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>ethif.cpp<br/>-->
   
== PBX: Blind Transfer to a different Slave could fail under special circumstances ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101509 101509]
|}
The blind transfer failed when<br/>- e.164 style nodes are used<br/>- transfer destination is thru a trunk on a different PBX<br/>- transfering endpoint is configured to a node, which is another PBX<br/>- transfered call is from trunk<br/>- ...<br/><!--<br/>pbx.cpp<br/>-->
   
== IP-DECT: Radio call list with OEM PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101606 101606]
|}
The radio call list can't be shown with Mozilla if an OEM PBX is used and a 'R'-key has been pressed. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectradio_mastercall.cpp<br/>-->
   
== PBX: Boot-Loop when replicating objects with wrong password ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101879 101879]
|}
When a replication was configured, replicating all objects from a different PBX, with different PBX password then configured already on the box, the box entered a boot loop, which only could be stopped with a long reset.<br/><!--<br/>pbx.cpp<br/>-->
   
== phone: ip222,ip232: Unintended autoconnect to handset when headset USB port connection is lost while ringing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=102028 102028]
|}
If a Jabra PRO 930 has "Auto sleep Mode" enabled it enters sleep (low power) state when it was not used for 8 hours.<br/>When a call arrives this is signaled to the headset. When the Jabra PRO 930 is in sleep state this works for about one second but then the USB port connection gets lost.<br/>The handling of such presumably temporary failures was not correct in case of a ringing call.<br/><br/><!-- keys_ip222 -->  <br/>
   
== IP6000: Prevent blinking error LED on old IP6000 with HW-Build 200 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=102151 102151]
|}
Conference DSP driver was started on old hardware that doesnt support the conference DSP<br/><!-- adsp2191_drv.cpp -->
   
== PBX: ISDN Partial Reroute did not work with e164 configurations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=102226 102226]
|}
The destination of the reroute was wrong (digits missing) if the reroute was done on a trunk object not in the root node with escapes<br/><!--<br/>pbx.cpp<br/>pbx_trunk.cpp<br/>-->
   
== IP222 IP232 IP241: Prevent simultaneous ec and pcm trace ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=102240 102240]
|}
Simulatenous ec and pcm trace cause packet loss at the DSP host interface.<br/><br/><!-- ac_phone3.cpp -->
   
== phone: Permit  Call Intrusion in Silent Monitoring Mode via Recall-Menu if configured at Phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100266 100266]
|}
Preconditions:<br/>- "Phone/User-x/Preferences/Enable Call Intrusion" checked<br/>- "config add PHONE APP /recall-ci-monitor" performed<br/>In the Recall-Menu opened when the Menu-key is pressed after dialling a busy user the "Monitor" option is offered in addition to the "Intrude" option.<br/><br/><!-- app_ctl.h app_cc.cpp app_cfg.h app_cfg.cpp app_gui.h app_gui.cpp -->
   
== SIP: New option "Filter incoming calls" on gateway interfaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101622 101622]
|}
New option "Filter incoming calls" on gateway interfaces.<br/><br/><!--<br/>voip.h<br/>siptrans.cpp<br/>gk.cpp/h<br/>relay_edit_voip.xsl<br/>-->
   
== IP222 IP232 IP241: DSP code update with improved Echocanceller ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=102061 102061]
|}
New DSP code with improved EC<br/>Gain settings changed for new DSP code.<br/><br/><!-- ac_494e.cpp ac_codec.cpp -->
   
= V9 Hotfix 27 (9061294) =
Changes included in Version 9 hotfix27<!---->
[http://mantis.innovaphone.com/view.php?id=102761 Definition]
 
 
   
== IP232,IP222: Wrong keyboard input ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=102369 102369]
|}
Wrong keyboard input.<br/>Key toggle runs even after key was released.<br/><br/><!--<br/>forms_keyboard.cpp<br/>-->
   
== PBX: Restart when submitting an object (under very unlikely timing conditions) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=102482 102482]
|}
This only happend when during the submitting of the object the HTTP session was terminated extremly quickly.<br/><!--<br/>pbx_admin.cpp<br/>pbx_admin.h<br/>pbx.cpp<br/>pbx_api.h<br/>-->
   
== SIP: Config option /take-zero-addr-for-hold did not work anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=102984 102984]
|}
Config option /take-zero-addr-for-hold did not work anymore.<br/>Since v9hf16 (#85534: SIP: Interop with Genband SBC).<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Memory leak when handling SUBSCRIBE(dialog-info) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=102997 102997]
|}
Memory leak when handling SUBSCRIBE(dialog-info),<br/>but only if a endpoint sends overlapping SUBSCRIBE requests<br/>to same destination with different Call-ID's.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== Gateway: Trap on collision of call-complation termination collision ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103125 103125]
|}
A restart could happen if a call-completion monitoring was terminated at the same time from the network and from the user/pbx.<br/><!--<br/>relay.cpp<br/>-->
   
== NAT: Do keepalive on TCP sessions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103133 103133]
|}
Otherwise no cleanup of TCP sessions would happen if the remote endpoints are restarted.<br/><!--<br/>nat.cpp<br/>-->
   
== myPBX: Add node escape prefix to number from PBX LDAP directory did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103344 103344]
|}
Previous fix #100698 did not work.<br/><!--<br/>pbx_client.cpp<br/>-->
   
== ip24, phone_orchid, ip6010...: too much padding of short ethernet frames ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103410 103410]
|}
some firewalls complain if short ehternet frames are padded to more than 60 bytes which was mistakenly done in some ethernet drivers.<br/><br/><!-- titan_drv.cpp, mv78x00_drv.cpp , orchid_drv.cpp -->
   
== PBX: Master/Slave Max Calls take subscriptions into account ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103415 103415]
|}
Functionkeys with dialog or presence subscription accross PBXs could block calls.<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>-->
   
== PBX: Call Completion was executed on termination of multicast call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103628 103628]
|}
The fact that the call was accepted was treated as a user action, but the accept was automatic, so no user has touched the phone<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX-SOAP: Memory leak when terminating a SOAP session in an unusual way ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103668 103668]
|}
For example if just the network connection is lost while a Poll command was pending a cmd_exec object was leaking.<br/><!--<br/>inno_soap.cpp<br/>-->
   
== phone: ip222,ip232: call waiting not signaled in USB headset when "Call Waiting: beep once" was configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103792 103792]
|}
<!-- ac_codec3.cpp -->
   
== SIP: Handling of reject for UPDATE for session refresh was not correct ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103996 103996]
|}
Receiving a reject for UPDATE used to refresh a call (session refresh)<br/>must be handled like receiving BYE.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== IP-DECT: Trap with login feature ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104609 104609]
|}
There is a trap in DECT radio if the user login feature is used. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectradio_reg.h<br/>dectradio_call.cpp<br/>-->
   
== DHCP:  A  'Coder' manufacturer option longer than 31 characters could not be configured at server and not evaluated by client ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105071 105071]
|}
A coder config longer than 31 characters could not be entered in the field<br/>"IP4/ETXn/DHCP Server/Offer Parameters/Coder" and the DHCP Client silently discarded a longer coder config possibly provided by a non innovaphone DHCP server.<br/><br/><!-- dhcp_if.h -->   
   
== phone: ip222,ip232: handle additional product id for  'Jabra BIZ 2400 Mono USB' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103560 103560]
|}
the versions tested so far had product id 0x2401, newer ones come with 0x2401<br/><br/><!-- keys ip222.cpp --> 
   
== IP241 IP222 IP232: Change back to previous DSP code ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104862 104862]
|}
Previous DSP has a better echocanceller.<br/>Also the IP241 Handset micrphone parameters are updated.<br/>The IP241 handset receiver equalizer is unchanged.<br/><br/><!-- ac_494e.cpp ac_codec3.cpp --><br/>
   
= V9 Hotfix 28 (9061309) =
Changes included in Version 9 hotfix28<!---->
[http://mantis.innovaphone.com/view.php?id=104238 Definition]
 
 
   
== PBX: In e.164 configuration a CFNR on slave PBX for call from local trunk back to local trunk did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103430 103430]
|}
The object initiating the CFNR was lost when the call was sent to the master.<br/>Collateral damage of<br/>fix: #99674: PBX: CFNR/CFB on PBX object did not work in some cases<br/><!--<br/>pbx.cpp<br/>test: pbx/dis, 392-cfnr-ntl-trunk-local.xml<br/>-->
   
== Media: Do not write error log if RTP is received before media negotiation is complete ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104390 104390]
|}
Do not write error log if RTP packets are received before media negotiation is complete.<br/>Error 0x00050003 (Wrong Payload Type received) was generated before.<br/><br/><!--<br/>media.cpp<br/>sip.cpp<br/>-->
   
== Increasing memory usage when viewing PBX pages with Kerberos login ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104506 104506]
|}
When the the PBX pages are displayed using a Kerberos login, some command_exec objects are never deleted. This causes increasing memory usage.<br/><br/><!--<br/>command.cpp<br/>missing mod_login_pening++ in commmand_exec::login_result<br/>-->
   
== PBX E.164 Configuration: Call forward to remote Trunk, should call internal loopback destination ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104520 104520]
|}
If a call forward is configured to the switchboard of a remote location (typically -0, same as trunk prefix) the call should not be sent out to the trunk, but the internal loopback destination should be called.<br/><!--<br/>pbx_trunk.cpp<br/>-->
   
== EDSS1 Interworking: Interworking Of Incoming Partial Rerouting Failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104610 104610]
|}
A number field wasn't initialised, leading to an interworking fault at the boundary between EDSS1 and H.450.<br/><!--<br/>q950.cpp<br/>relay.cpp<br/>-->
   
== SIP: Cannot change a password on DECT systems without restart ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104614 104614]
|}
Cannot change a password on DECT systems without restart.<br/>Event RAS_UPDATE_KEY was not handled by SIP stack.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Memory leak when receiving BYE for a dialog in early state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104628 104628]
|}
Memory leak when receiving BYE for a dialog in early state.<br/>On a call which is not connected yet.<br/>On a call where a INVITE server transaction is pending.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== HTTP client: Update of nonce is ignored in digest authentication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104733 104733]
|}
Once digest authentication is chosen the HTTP client does not accept any more changes to the digest parameters in the same session.<br/><!--<br/>httpclient_i.cpp<br/>-->
   
== IP232,IP222, IP241: Fkeys may overlap call control ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=104886 104886]
|}
Fkeys overlap call control in case of two inbound ringing calls.<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== SIP: Memory leak when receiving 403 after 401 for REGISTER ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105022 105022]
|}
Memory leak when receiving 403 after 401 for REGISTER:<br/><br/> REGISTER<br/> 401 Unauthorized<br/> REGISTER with Authentication<br/> 403 Forbidden<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== SIP: "Spiral" was handled like "Loop" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105176 105176]
|}
Check Request-URI checking for loop error.<br/><br/><!-- siptrans.cpp -->
''Status:''
Fixed in 9.00, 10.00, 10.10, 11.00
   
== LDAP Replication: Increased Buffer for Computation of Object Differences ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105189 105189]
|}
Was to small<br/><!--<br/>innorep.cpp<br/>-->
   
== PBX Trunk: List of Facilities Could Get Corrupted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105255 105255]
|}
<!--<br/>pbx_trunk.cpp<br/>-->
   
== phone: pickup notification tone too loud and tone blurred on ip110,150,200a,,230,240 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105424 105424]
|}
The volume of the pickup notification tone is derived from the volume configured for the internal ring tone.<br/>If this volume is not appropriate it can be set to a fixed value (see  http://wiki.innovaphone.com/index.php?title=Howto:Change_the_volume_of_the_pickup_key_audio_notification ).<br/><br/><!-- phonesig.cpp phonesig.h app_fkey.cpp codec.cpp codec.h ac_codec3.cpp inca_afe.cpp -->
   
== SIP: New config file option /no-cng-tone-detection ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105219 105219]
|}
New config file option /no-cng-tone-detection<br/>To keep calling side from initiating switch-over to T.38.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
= V9 Hotfix 29 (9061320) =
Changes included in Version 9 hotfix29<!---->
[http://mantis.innovaphone.com/view.php?id=105883 Definition]
 
 
   
== IP-DECT: Handover not possible for accepted waiting calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105747 105747]
|}
Handovers are not possible for accepted waiting calls. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectfty.cpp<br/>dectmsg.cpp<br/>-->
   
== Phones: SIP-Call was rejected if first offered codec was CLEARMODE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105932 105932]
|}
SIP-Call was rejected if first offered codec was CLEARMODE<br/><br/><!-- sip.cpp -->
   
== PBX: For pickup a wrong picked from number was displayed in case of nodes with escapes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=106051 106051]
|}
Number adjustment did not work correctly in this case<br/><!--<br/>pbx.cpp<br/>-->
   
== Voicemail Objekt: Trap During Reconfiguration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=106274 106274]
|}
Wasn't reproducable. Added a counter-measure against a suspected scenario.<br/><!--<br/>pbx_vm.cpp<br/>-->
   
== IP6000 IP2000: Crypto driver stopped working after receiving bad SRTP packets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=106681 106681]
|}
Better protection against receiving non-SRTP packets.<br/><br/><!--<br/>cipher_api.h<br/>cipher_api.cpp<br/>srtp_cipher.cpp<br/>-->
   
== IP222,IP232: Cannot move cursor rightwards in 'indirect dialing' screen ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=106791 106791]
|}
Cannot move cursor rightwards in 'indirect dialing' screen.<br/>Moving cursor leftwards works, but rightwards doesn't.<br/><br/><!--<br/>phone_dir_ui.cpp/h<br/>-->
   
== SIP: Call was dropped after successful session refresh ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=106886 106886]
|}
Call was dropped after successful session refresh.<br/>Handling of 200/OK for UPDATE was wrong.<br/>Was wrong since bug fix #103996 (v9hotfix27)<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Memory leak when receiving BYE while re-INVITE server transaction is pending ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=107066 107066]
|}
Memory leak when receiving BYE right after re-INVITE.<br/>re-INVITE server transaction is not deleted.<br/><br/><!-- sip.cpp -->
   
== SIP: Do not send SDP answer twice (PRACK and ACK) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=107107 107107]
|}
Do not send SDN answer in ACK if it already been sent in PRACK.<br/>Regards early media scenarios that starts with INVITE without offer.<br/><br/>INVITE(no sdp)<br/><br/>183(sdp offer)<br/>PRACK(sdp answer)<br/>200(PRACK)<br/><br/>180(no sdp)<br/>PRACK(no sdp)<br/>200(PRACK)<br/><br/>200(no sdp)<br/>ACK(no sdp)<br/><br/><!-- sip.cpp -->
   
== Gateway: Fix for call-replacement ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=107318 107318]
|}
When handling a call leg replacement the Gateway releases the replaced call before accepting the replacement call.<br/>May confuse the replacing endpoint.<br/>In case of SIP this regards handling of INVITE with Replaces header.<br/>In case of H.323 this regards handling of SETUP with ctSetup facility.<br/><br/><!--<br/>relay.cpp/h<br/>-->
   
== PBX Map: Overlap dial thru a Map Object on Slave with a call via the Master did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=107682 107682]
|}
If a phone registers from a different location, any call from this phone has to be routed via the master to check for 'local' objects. In this case overlap dialing thru a Map object on the slave did not work.<br/><!--<br/>pbx_map.cpp<br/>-->
   
== phone: importing a phonebook may result in memory leaks ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=107760 107760]
|}
happens when phonebook entries containing non UTF8 characters are deleted
   
== IP-DECT: Trap in Radio ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108556 108556]
|}
A rare trap can occur in the IP-DECT Radio with IP1202 and a multi-master solution.<br/><br/><!--<br/>Changed files:<br/>dectradio.cpp<br/>dectlocalusers.h<br/>dectlocalusers.cpp<br/>-->
   
== phone: fine grained function locking  - PHONE_LOCK_USER_INFO bit supresses display of local user info ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=105697 105697]
|}
For phones installed in rooms open to the public it's sometimes required to prevent this phones from beeing called by non authorized persons. Adding this bit to the mask defined under "Phone/Protect/Fine grained Function Locking" supresses any info about the local user (number/name/display name).<br/>
   
== "DELETE" Assertion traces caller ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=106293 106293]
|}
For debugging purposes<br/><!--<br/>box/arm/arm.cpp<br/>box/mips/mips.cpp<br/>box/ia32/ia32.cpp<br/>-->
   
== SIP/SDP: Workaround for illegal codec signaling from Ricoh FAX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=106513 106513]
|}
Workaround for illegal codec signaling from Ricoh FAX:<br/><br/>\tv=0<br/>\to=RICOH-SIP-IPFAX 1379412928 1379412928 IN IP4 130.30.3.32<br/>\ts=Session SDP<br/>\tt=0 0<br/>\tm=audio 5004 RTP/AVP 18<br/>\tc=IN IP4 130.30.3.32<br/>\ta=rtpmap:18 G.729/8000<br/><br/>Must be "G729" not "G.729"!<br/><br/><!-- sdpmsg.cpp -->
   
= V9 Hotfix 30 (9061325) =
Changes included in Version 9 hotfix30<!---->
[http://mantis.innovaphone.com/view.php?id=108154 Definition]
 
 
   
== PBX: Number mapping for calls sent to 'Route Master calls if no Master to' sometimes wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100299 100299]
|}
Esspecially in the case that the master was available but the call could not be forwarded to the final slave.<br/><!--<br/>pbx.cpp<br/>-->
   
== IP232,IP222,IP241: Display information of pickup fkey truncated too much ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=107962 107962]
|}
Display information of pickup fkey truncated too much<br/><br/><!--<br/>forms_color.cpp<br/>-->
   
== wrong activation of non-existent spread-spectrum clock ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108014 108014]
|}
happens for all non-ip28 (ip22/24/302/305) gateways if hardware build >= 402, causes the gateways to stall due lack of clocking<br/><!--<br/>ip24.cpp<br/>-->
   
== SIP: Different registrations for the same AOR from same ip address and same port were handled as one ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108199 108199]
|}
SBC forwards different registrations for the same AOR to the PBX from same SBC ip address and SBC same port.<br/>PBX must take this as individual registrations as long as Contact-URI differs.<br/>Even is REGISTERs are sent from same ip address and port and for same AOR.<br/><br/><!--<br/>siptrans.cpp<br/>-->
   
== IP-DECT: Trap with login feature ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108236 108236]
|}
In a rare case a trap can occur if the login feature is used and the master is changed. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectradio.h<br/>dectradio.cpp<br/>dectradio_call.h<br/>dectradio_call.cpp<br/>-->
   
== SIP: Bug in media negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108538 108538]
|}
Bug in media negotiation when processing CFNR on an incoming SIP call received without offer.<br/><br/><!--sip.cpp-->
   
== SIP: Trap when outgoing SIP subscription is canceled while DNS is pending ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108550 108550]
|}
Trap when outgoing SIP subscription is canceled while DNS is pending.<br/><br/><!--sip.cpp-->
   
== PBX: Leak when sending group indications to an not responding endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=109270 109270]
|}
Each call only a single group indication was removed from the queue, if the rate of group indications was higher then the rate of failed calls, the memory for group indications accumulated.<br/><!--<br/>pbx_gi.cpp<br/>pbx_gi.h<br/>-->
   
== IP-DECT: Traces added for login feature ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108300 108300]
|}
New traces added for login feature.<br/><br/><!--<br/>Changed files:<br/>dectradio.cpp<br/>dectradio_reg.cpp<br/>-->
   
== PBX: Make Node/PBX at Config Template configurable ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108506 108506]
|}
For management of administration rights<br/><!--<br/>pbx_edit_config.xsl<br/>-->
   
= V9 Hotfix 31 (9061333) =
Changes included in Version 9 hotfix31<!---->
[http://mantis.innovaphone.com/view.php?id=109318 Definition]
 
 
   
== Media channel diagnostics ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108639 108639]
|}
Added some traces to support debugging of media channel issues.<br/><br/><!--<br/>medialib.h<br/>media.cpp<br/>-->
   
== SIP: Insufficient buffer space for response construction ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=109624 109624]
|}
CANCEL response was not sent if received CANCEL request was bigger than expected.<br/>E.g.<br/><br/>    CANCEL sip:51409@10.46.17.174:5060;transport=UDP SIP/2.0<br/>    Record-Route: <sip:ea6a4b4@10.39.47.182;transport=udp;lr><br/>    CSeq: 1 CANCEL<br/>    Call-ID: 80628647ee31e34851f74d5500<br/>    From: Surgery ;tag=80628647ee31e24851f74d5500<br/>    To: <sip:51409@st-johns.local><br/>    Via: SIP/2.0/UDP 10.39.47.182;rport;branch=z9hG4bK736474346101292-AP;ft=10.39.47.182~13c4<br/>    Via: SIP/2.0/UDP 10.39.47.181:15060;rport=15060;ibmsid=local.1368808668750_7353594_7379782;branch=z9hG4bK736474346101292<br/>    Via: SIP/2.0/UDP 10.39.47.181:15060;rport;ibmsid=local.1368808668750_7353593_7379781;branch=z9hG4bK980490016415039<br/>    Via: SIP/2.0/TLS 10.39.47.182;branch=z9hG4bK80628647ee31e24851f74d55001-AP;ft=84340;received=10.39.47.182;rport=35249<br/>    Via: SIP/2.0/TLS 10.39.47.240;branch=z9hG4bK80628647ee31e24851f74d55001;avaya-cm-term-reaction=shortcut<br/>    Via: SIP/2.0/TLS 10.39.47.182;branch=z9hG4bK341225591747865-AP;ft=3<br/>    Via: SIP/2.0/TLS 10.39.47.181:15061;branch=z9hG4bK341225591747865;rport=36631;ibmsid=local.1368808668750_7353592_7379780<br/>    Via: SIP/2.0/TLS 10.39.47.181:15061;branch=z9hG4bK73567447322163;ibmsid=local.1368808668750_7353591_7379779<br/>    Via: SIP/2.0/TLS 10.39.47.182;branch=z9hG4bK80628647ee31e44851f74d5500-AP;received=10.39.47.182;rport=35249;ft=84340<br/>    Via: SIP/2.0/TLS 10.39.47.240;branch=z9hG4bK80628647ee31e44851f74d5500<br/>    Max-Forwards: 69<br/>    Content-Length: 0<br/><br/><br/><!--siptrans.cpp-->
   
== IP-DECT: Transferred remote initiated calls without voice ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=109998 109998]
|}
Some transferred remote initiated calls have no voice connection. This are calls which are initiated with myPBX to an external endpoint. This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectradio_call.cpp<br/>-->
   
== Linux: DNS configuration changes device DNS ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=110073 110073]
|}
The Linux DNS configuration changes the local device DNS configuration. This shouldn't be and is fixed now.<br/><br/><!--<br/>Changed file:<br/>ethif.cpp<br/>ipproc.cpp<br/>linux_ip_ethif.xsl<br/>-->
   
== Linux: Empty server identifier and no NTP server if only ETH1 is used ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=110695 110695]
|}
If only ETH1 is used and Linux gets a fixed IP address, the DHCP message doesn't include a valid server identifier and NTP server address. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dhcp.cpp<br/>-->
   
== IP-DECT: Wrong trace warning ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111061 111061]
|}
A wrong trace warning of the last fix is removed.<br/><br/><!--<br/>Changed file:<br/>dectlocalusers.cpp<br/>-->
   
== Trap in webdav client when processing XML directory listing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111063 111063]
|}
Trap in webdav client when processing XML directory listing.<br/><br/><!-- webdav_client.cpp -->
   
== IP-DECT: OEM Configuration read failure ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111110 111110]
|}
There is a read failure for an OEM configuration. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectmaster.cpp<br/>-->
   
== DHCP: A server with "Reserved and same Vendor Clients only" checked did not provide leases to IP62 phones ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111276 111276]
|}
<!-- dhcp.cpp dhcp.h -->
   
== phone: ip241,ip222,ip232: sometimes display and USB hadrware did not recover from a reset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111309 111309]
|}
sometimes the display and USB hardware was not working after a reset (firmware update or configuration change) and a power cycle was required to bring them up again.<br/><br/><!-- boot241.y, boot222.y, boot232.y -->
   
== phone: ip222,ip232: support Jabra UC VOICE 550 / 750 Version A headset models ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=106061 106061]
|}
Headsets with Version A printed on the package have IDs different to the non-A versions even if the part numbers do not differ. The USB firmware of the Version A headsets differs from the predecessor firmware and requires a special timing.<br/><br/><!-- keys_ip222.cpp usb_audio.cpp usb_audio.h usb_hid.cpp usb_hid.h usb_msd.h ohci.cpp ohci.h usb_host_if.h physical.cpp physical.h -->
   
== phone: ip150: changed handset speaker parameters for hardware 102/602 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=110048 110048]
|}
<!-- inca_afe.cpp -->
   
= V9 Hotfix 32 (9061342) =
Changes included in Version 9 hotfix32<!---->
[http://mantis.innovaphone.com/view.php?id=112705 Definition]
 
 
   
== PBX: Calls to 'No Master' were sent with wrong Number under special Conditions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=109000 109000]
|}
This happened if there was a call-forward, which resulted in a call to the master and  the master could not send the call to the destination slave either because this Slave was not registered or there was a busy-out setting preventing it.<br/><br/>The problem only happend with a E.164 config.<br/><!--<br/>pbx.cpp<br/>-->
   
== Linux: Disable feature ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111515 111515]
|}
It can occur that the Linux cannot be disabled. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>command.cpp<br/>-->
   
== phone: ip222,ip232: USB Bluetooth dongle of some "Plantronics Voyager"  Headsets  not detected anymore since V9hotfix24/V10rc1 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111590 111590]
|}
The Plantronics bluetooth headsets Voyager PRO UC, Voyager Legend and Calisto 620<br/>come with an USB bluetooth dongle with one of the product codes 0415, 0416, 0417. Dongles with the product code 0416 were not detected. <br/><br/><!-- keys_ip222.cpp -->
   
== phone: under soap control no audio data was sent when a call was retrieved after another call has been transferred ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111662 111662]
|}
<!-- phonesig.cpp -->
   
== Phones: Pickup list sometimes contains doublets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111725 111725]
|}
Same call could be is listed more than once.<br/><br/><!--app_fkey.cpp-->
   
== SIP: REGISTER refresh was rejected "503 Service Unavailable" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112186 112186]
|}
REGISTER refresh was rejected "503 Service Unavailable"<br/>if Contact header contains a not-quoted display-name.<br/>Eg:<br/><br/>    REGISTER sip:10.88.32.1;transport=udp SIP/2.0<br/>    Max-Forwards: 70<br/>    Content-Length: 0<br/>    Via: SIP/2.0/UDP 10.88.132.139:5060;branch=z9hG4bKd4e0fc46e<br/>    Call-ID: f68155fd504d807<br/>    From: 4044 ;tag=1a877766617814e;epid=SC2c318c<br/>    To: 4044 <sip:4044@10.88.32.1><br/>    CSeq: 1287 REGISTER<br/>    Contact: 4044 <sip:4044@10.88.132.139:5060;transport=udp>;expires=3605<br/>    User-Agent: optiPoint 410_420/V6 6.0.55<br/>
   
== Since fix #97150 a series of comma didn't extend the wait time before DTMF dialing any more. ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112334 112334]
|}
Since fix: "#97150: phone: DTMF digits following a comma in a number to be dialed were not handled correctly in some cases." from 21.3.2013 a series of comma didn't extend the wait time before DTMF dialing any more. The wait time was always 1 second because only the last comma was seen.
   
== phone ip222,ip232: Plantronics Savi W440 Headset sometimes mute when controlled by a SOAP-Application or myPBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112578 112578]
|}
When an outbound call was started by a SOAP-Application after a call started using the headset Talk-button the headset was mute because the radio link was not established.<br/><br/><!-- keys_ip222.cpp --><br/>
   
== Gateway/H.323: Trap when canceling an call with Media Relay because out of Resources ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112690 112690]
|}
In this case the cleaup of the outgoing call was incorrect and caused a trap. Only happened when the outgoing call was H.323.<br/><!--<br/>h323ch.cpp<br/>-->
   
== PBX: Connected Number missing on calls to some PBX objects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112731 112731]
|}
The connected number is needed to determin if the destination of the call is internal, which is needed for features like not automatic recording of external calls<br/><!--<br/>pbx.cpp<br/>pbx_map.cpp<br/>-->
   
== PBX: Handling of enblock (sending-complete) calls improved ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112746 112746]
|}
Respond with CallProceeding, so that if the call is rejected, there is some ack before the reject. Otherwise this would look like an error.<br/><!--<br/>pbx.cpp<br/>relay.cpp<br/>pbx_trunk.cpp<br/>-->
   
== Trap in webdav client when processing XML directory listing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112764 112764]
|}
Trap in webdav client when processing XML directory listing.<br/><br/><!-- webdav_client.cpp -->
   
== phone:  PBX directory config page extended by Address, Gatekeeper ID and Attribute field to permit  for non default values ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111980 111980]
|}
By default address and gatekeeper ID of the PBX where the user is registered are used and the 'Long Name' is searched. Now for example this can be changed to use the master PBX and to search the 'Display Name'.<br/><br/><!-- reg_edit_dir.xsl phone_dir.cpp phone_user_ui.cpp --><br/><br/>
   
== phone: set up call with "Sending complete" when the number has been provided before the call is initiated ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112103 112103]
|}
This applies to calls initiated while browsing a directory or a call list, by pressing a dial function key or via indirect dialing, i.e. when a number is entered before going off-hook.<br/>To permit for incomplete numbers in a phone directory "Sending Complete" is not set when a number is terminated by a '+' character. Then the '+' is stripped off and the number can be completed by typing more digits.<br/>In this case and in case the user goes off-hook before typing any digit the number is assumed to be complete when a '#' character is entered or the "Enblock Dialing Timeout" is reached before the next digit was entered.<br/><br/>The old overlap sending behaviour can be restored by<br/>    config add PHONE SIG /overlap-sending<br/><br/><!-- phonesig.cpp, phonesig.h, phonesig_if.h, phone_list_ui.cpp, phone_dir_ui.cpp, app_fkey.cpp --> <br/>
   
== phone: ip222,ip232: support for Jabra BIZ 2300, Sennheiser Presence UC ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112335 112335]
|}
<!-- keys_ip222.cpp, ohci_defs.h -->
   
= V9 Hotfix 33 (9061347) =
Changes included in Version 9 hotfix33<!---->
[http://mantis.innovaphone.com/view.php?id=112706 Definition]
 
 
   
== H.323: The efc-features were not forwarded accross PBXs from an endpoint, which was called with slowstart ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112037 112037]
|}
If a slowstart endpoint performed a transfer, connecting two efc endpoints on other PBXs, it could happen, that the media negotiation between the new endpoints was slowstart, because the PBX on which the transfer was performed did not receive the efc-featurse<br/><!--<br/>h323ch.cpp<br/>h323ch.h<br/>h323sig.cpp<br/>-->
   
== IP222 IP232: Option to disable Energy Efficient Ethernet (EEE) added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=112979 112979]
|}
Needed for some PCïs that loose the link with EEE.<br/>EEE status display added to V9 and V10.<br/><br/><!-- orchid_drv.* -->
   
== phone ip222,ip232: phone keypad locked when digits are entered too fast (can be unlocked by ESC key) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113068 113068]
|}
<!--<br/>keys_ip222.cpp<br/>forms_keyboard.cpp<br/>-->
   
== H.323: unexpected Restart on a very unlikly Hold/Disconnect collision ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113079 113079]
|}
If the two events happened during the same couple of microseconds an assertion in the code caused a restart.<br/><!--<br/>h323ch.cpp<br/>-->
   
== PBX: The top level Tag of a CDR should contain the normalized number of the endpoint it was created for ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113112 113112]
|}
This was sometimes not the case, but only the extension number without node prefixes was included.<br/><!--<br/>pbx.cpp<br/>-->
   
== DNS: Services/DNS/Query Caused A Trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113137 113137]
|}
An internal buffer length check was wrong<br/><!--<br/>interface/dns.cpp<br/>dns/dnsrslv.cpp<br/>-->
   
== phone ip222,ip232: added config flag to prevent ringing via speaker when a headset is plugged and enabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113263 113263]
|}
  config add AC-DSP0 /headset-only<br/><br/>unconditionally disables ringing via speaker when a headset is plugged and enabled. this is done independent of the "Do not Disturb" setting.  <br/><br/><!-- ac_phone3.h ac_phone3.cpp ac_codec3.cpp -->
   
== Voicemail: &lt;exec&gt; Without "url" Causes Trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113428 113428]
|}
A check was missing<br/><!--<br/>vm_script_if.cpp<br/>-->
   
== Flash Directory: Config-Encoding Of Objects Breaking Through 8K Line Length ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113851 113851]
|}
This fix just helps where an object's representation within the configuration file expands beyond the 8K barrier. <br/><br/>http://wiki.innovaphone.com/index.php?title=Concept_Flash_Directory#Config-Encoding_Of_Objects_Breaking_Through_8K_Line_Length<br/><!--<br/>flashdir.cpp/.h<br/>-->
   
== ip1202: config flag to force reboot when receive interrupts are missing for a certain time ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113948 113948]
|}
By default the the MAC is is reset in case of missing receive interrupt.<br/><br/>  config add ETH0 /rx-miss-reboot<br/>forces a reboot instead of a MAC reset. <br/><br/>  config add ETH0 /rx-wait-max <seconds><br/>defines the maximum time to wait after the last receive interrupt before MAC reset or reboot (default is 30 seconds).<br/><br/>  config add ETH0 /itrace<br/>activates an interupt backlog which is written to trace buffer before MAC reset or reboot.
   
== TLS: Problem with negotiation of protocol version on server side ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=114046 114046]
|}
When the client offered TLS 1.2 or higher, the connection was refused instead of downgrading to the highest supported protocol version.<br/><!--<br/>tls.cpp<br/>tls.h<br/>unit-tests/tls/basic/153-handshake-server-normal-tls15-downgrade.xml<br/>-->
   
== NT ISDN Point to Multipoint Interfaces: Rejecting of a call had delay of 4.5s ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=115118 115118]
|}
A call was not rejected right away, but SETUP was resent in case another endpoint would respond. This should be done only if the call was rejected because of incompatible destination.
   
== PBX: If an endpoint performs a pickup-req, the resulting call should be sent to the requesting endpoint only ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=115569 115569]
|}
If on a user two phones were registered and one phone performed a pickup, both phones were ringing for the call to be picked up.<br/><!--<br/>pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>-->
   
= V9 Hotfix 34 (9061355) =
Changes included in Version 9 hotfix34<!---->
[http://mantis.innovaphone.com/view.php?id=114492 Definition]
 
 
   
== PBX: Pickup call was not indicated as internal in Connected Number ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113197 113197]
|}
This could cause problems were it is important to know if the call is internal or external, for example if only external calls are to be recorded.<br/><!--<br/>pbx.cpp<br/>pbx_dtmf.cpp<br/>-->
   
== phone: In Recording Mode 'transparent' or'optional' internal calls were recorded although 'External Calls Only' was checked ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=114516 114516]
|}
happened only to outbound calls initiated by some dialing application.<br/>outbound calls initiated directly at the phone and inbound calls were recorded correctly.<br/><br/><!-- app_call.cpp -->
   
== Gateway trap with 'Out of Memory' when CF-card stucks ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=114781 114781]
|}
A CF-card that stucks leads to huge memory allocations of type cf_command containing non-processed CF-requests.<br/><!--<br/>cf_drv.cpp<br/>cf_drv.h<br/>-->
   
== phone: In Recording Mode 'transparent' or'optional' a 2nd call started by a dialing application could terminate the 1st call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=114789 114789]
|}
This happened when a 2nd call was started by a dialing application and then terminated again while the call was in alerting state.<br/><br/><!-- phonesig.cpp --><br/>
   
== H.323: No media if a reverse Media call is sent to a slowstart endpoint and tranfered to a EFC endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=115018 115018]
|}
Media negotiation problem which could happen under special conditions when an XCAPI application is performing a call transfer<br/><!--<br/>channel.h<br/>-->
   
== DHCP: Increase maximum length of "Local Networks" and "IP Routing" option strings from 127 to 252 characters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=115709 115709]
|}
<!-- dhcp_if.h -->
   
== Primary Address for "Alarm and Event Forward Server" of type SYSLOG could not be configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=115745 115745]
|}
<!-- syslog.xsl -->
   
== (clone of #114012) SIP: Trap in federation scenario ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=116005 116005]
|}
Trap in federation scenario when processing INVITE.<br/><br/><!-- sip.cpp -->
   
== ISDN: Missing Ringback on calls sent out to an NT Mode interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=116390 116390]
|}
If there is no progress indicator indicating inband tones, channels should not switched on for calls sent out to an NT Mode ISDN interface. Otherwise RTP containing silence could switch off any locally generated ringback.<br/><!--<br/>nt_tbl.tbl<br/>-->
   
= V9 Hotfix 35 (9061367) =
Changes included in Version 9 hotfix35<!---->
[http://mantis.innovaphone.com/view.php?id=116262 Definition]
 
 
   
== phone: two way media on a recording connection did not work anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=103956 103956]
|}
Since v9hotfix22/v10beta6 recording connections are established in sendonly mode because usually recorders do not send any media data and thus bulks of ?No Media Data received? events may be reported.<br/><br/>Now two way media can be explicitely enabled by checking "Phone/User x/Recording/Two Way Media" if required (for example for the Innovaphone Operator "Greeting Function").<br/><br/><!-- phone_config.h phone_config.cpp phone_edit.cpp reg_edit_rec.xsl phonesig_if.h phonesig.h phonesig.cpp app_ctl.h app_ctl.cpp app_call.cpp -->
   
== Gateway trap with 'Out of Memory' when CF-card stucks ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=114781 114781]
|}
A CF-card that stucks leads to huge memory allocations of type cf_command containing non-processed CF-requests.<br/><!--<br/>cf_drv.cpp<br/>cf_drv.h<br/>-->
   
== SIP: The 2xx response to the REGISTER request MUST contain, in a Contact header field, a complete list of bindings ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=116835 116835]
|}
The 2xx response to the REGISTER request MUST contain, in a Contact header field, a complete list of bindings that have been registered for this address-of-record.<br/>Not only the one that has just been added.<br/><br/><!--<br/>sip.cpp/h<br/>siptrans.cpp<br/>-->
   
== SIP: Interop to "Thomson TB30 hw4 fw2.77.0.2 00-26-44-30-5D-A2" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=117149 117149]
|}
Thomson TB30 hw4 fw2.77.0.2 00-26-44-30-5D-A2<br/>uses slightly different Contact-URI for registration:<br/>  "sip:102-dkkn2jgs10ffe@10.35.0.133:5060;user=phone;transport=udp"<br/>and subscription:<br/>  "sip:102-dkkn2jgs10ffe@10.35.0.133:5060;transport=udp"<br/><br/>Subscription is rejected.<br/><br/><!-- siptrans.cpp -->
   
== H.323: Don' generate "Unexpected Message" event for messages received after sending call clearing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=117248 117248]
|}
These messages are not unexpected, but results of a normal collision<br/><!--<br/>h323sig.cpp<br/>-->
   
== ip1202: DTMF tones to be sent to the local DECT phone were sent to the voip channel ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=117254 117254]
|}
thus DTMF tones sent from a remote peer were not heard by the local peer
   
== IP-DECT: Resent disconnected calls to handsets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=117376 117376]
|}
Calls disconnected by the gatekeeper can be wrongly resent to the handsets, if the calls are disconnected with the release code Non-selected-user-clearing (26). This is fixed now.<br/><br/><!--<br/>Changed files:<br/>dectmaster.cpp<br/>dectfty.cpp<br/>-->
   
== PBX Gateway: Internal Destination flag did not work for outgoing calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=117418 117418]
|}
If external transfers are not allowed, this flag should allow a transfer to a gateway object for a call coming in from an external source.<br/><!--<br/>pbx.cpp<br/>pbx_api.h<br/>pbx_gw.h<br/>-->
   
== H.323: Internal/External information got lost on Endpoint after Transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=118350 118350]
|}
The information if the endpoint to which a phone is connected after a transfer is internal or external was not available on the phone. The recording of internal or external calls only did not work in this case.<br/><!--<br/>h450.cpp<br/>-->
   
== phone: ip222,ip232: support Jabra Pro 935 USB-Bluetooth Headset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=117060 117060]
|}
The Pro 935 looks like a Pro 930 but has a bluetooth- instead of a DECT-headset. The bluetooth-headset can be paired with a mobile phone.
   
= V9 Hotfix 36 (9061368) =
Changes included in Version 9 hotfix36<!---->
[http://mantis.innovaphone.com/view.php?id=118548 Definition]
 
 
   
== phone: keep remote party name after connect when dialled and connected number differ in first digits only ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=118537 118537]
|}
<!-- phonesig.cpp -->
   
== PBX Exec: Partner Keys at exec did not work correctly if secretary names matched in the first half ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=118869 118869]
|}
If two secretaries were configured with names, being identical in the first half and identical length (e.g. 'Hans' and 'Harz'), for some functions like presence status not the correct secretary was found.<br/><!--<br/>pbx_exec.cpp<br/>-->
   
== phone: ip110/150/200a/230/240: false "Excessive loss of Data" reports when playing Music on Hold (MOH) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=119055 119055]
|}
<!-- inca_dsp.cpp, inca_dsp.h -->
   
== phone: CLIR couldn't be overridden at phone by "Number Presentation: On" when "Hide own Number" was checked in a config template ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=119270 119270]
|}
Overriding via WEB interface works<br/><br/><!-- app_gui.cpp forms2_lib.cpp -->
   
== Waiting Queue: Switching to next announcement by DTMF "0" did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=119525 119525]
|}
Switching to next announcement by DTMF "0" did not work.<br/><br/><!-- media.cpp -->
   
== SIP: Bug in media re-negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=119635 119635]
|}
Bug in media re-negotiation on media-relay interfaces.<br/><br/><!-- sip.cpp -->
   
= V9 Hotfix 37 (9061372) =
Changes included in Version 9 hotfix37<!---->
[http://mantis.innovaphone.com/view.php?id=119729 Definition]
 
 
   
== ip1202: improved ethernet receive error handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120007 120007]
|}
- workaround for 10/100Mb/s gemac Rx lockup:<br/>  the interface is run in promiscuous mode and the driver filters the packets<br/>- workaround for Rx Queue Overrun problem:<br/>  on a Rx Queue Overrun interrupt gemac and phy are rest completely<br/><br/>- for test purposes promiscuous mode can be disabled|enabled by<br/>    !config add ETH0 /rx-promiscuous 0|1<br/>  or temporaryly by<br/>    !mod cmd ETH0 rx-promiscuous 0|1 <br/><br/><!-- comcerto_eth_drv.cpp comcerto_eth_drv.h comcerto_eth_drv_s.xsl -->
   
== PBX: Pickup with partner key did not work if visibility was configured by name ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120070 120070]
|}
The call was displayed on the partner key, but the pickup did not work. It did work if visibility was configured with a group.<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX-SOAP: Clearing of call to waiting queue took 30s ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120231 120231]
|}
Call was hanging as if there was in-band information<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== FXS with Feature Codes, possible trap on call-completion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120384 120384]
|}
When call completion was executed, there was a chance of a trap under special conditions<br/><!--<br/>relay.cpp<br/>-->
   
== IP-DECT: Rare trap on IP1202 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120442 120442]
|}
There is a rare trap in DECT-Master if a new call is sent to the radios and there still exists an old call for the endpoint and this call is assigned to an unregistered radio. The trap only occurs on the IP1202, not the IP1200. This is fixed now.<br/><!--<br/>Changed files:<br/>dectmaster_if.h<br/>dectmaster.h<br/>dectmaster.cpp<br/>dectfty.h<br/>dectmsg.h<br/>mihotdesk_call.h<br/>-->
   
== DHCP-Server: strip leading and trailing spaces from values entered in  "IP4/ETHx/DHCP-Server/Offer Parameters" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120514 120514]
|}
<!-- dhcp.cpp dhcp_if.cpp -->
   
== PBX: Trap on Park/Pickup ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120579 120579]
|}
If a Park function key is used to park a call and pickup it again, a restart happend. This is a collateral damage from<br/><br/>fix 115569: PBX: If an endpoint performs a pickup-req, the resulting call should be sent to the requesting endpoint only<br/><br/>from v10sr8 and v9hf33<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX: Pickup accross locations from different nodes did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120638 120638]
|}
Adjustment of number was missing<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: Offered wrong local IP address as RTP address ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120739 120739]
|}
Offered wrong local IP address as RTP address.<br/>Collateral damage of #119269: SIP: Offered wrong local IP address as RTP address<br/><br/><!-- sip.cpp/h -->
   
== phone: ip222,ip232: Jabra UC VOICE 550/750 Version A - Microphone occasionally mute ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=120815 120815]
|}
<!-- keys_ip222.cpp -->
   
= V9 Hotfix 38 (9061386) =
Changes included in Version 9 hotfix38<!---->
[http://mantis.innovaphone.com/view.php?id=121199 Definition]
 
 
   
== phone: ip222,ip232: audio parameter configuration via command line did not work in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=121065 121065]
|}
Happened with command lines containing options without a value, for example a<br/>  config change AC-DSP0 HEADSET /spk-volume /mic-volume 5<br/>did not affect the microphone volume.<br/>Further input was not validated so big negative or positive values gave confusing results. <br/>    <br/><!-- ac_codec3.cpp -->
   
== PBX: Transfer with consultation in ringback - no ringback after transfer if performed by analog phone on IP22/.../IP28 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=121197 121197]
|}
It is not a problem of the analog interface, but the PBX, which does not play ringback if a retrieve is done before the transfer, which is done by the FXS.<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX: When a dyn PBX was deleted, with an id identical to the start of the id of another dyn PBX, this other dyn PBX was broken ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=121433 121433]
|}
Some VARS of the wrong dyn PBX were deleted<br/><!--<br/>pbx_admin.cpp<br/>-->
   
== IP-DECT: Watchdog trap on IP1202 with feature codes and handovers ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=121456 121456]
|}
There is a watchdog trap on IP1202 with enabled feature codes with firmware V9 hotfix37, if more than one master is used and the handset makes a handover. This is fixed now.<br/><br/><!--<br/>Changed file:<br/>dectfty.h<br/>-->
   
== SIP: Wrong expires value in Contact header of 2xx response for REGISTER ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=121641 121641]
|}
Wrong since v10sr9, v9hotfix35.<br/>Wrong expires value in Contact header during registration refresh.<br/>Correct value in Expires header.<br/><br/><!--<br/>sip.cpp/h<br/>-->
   
== pbx: memory leak when trace is active ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=121897 121897]
|}
<!-- pbx_admin.cpp -->
   
== PBX SOAP: Trap if trying to initiate a call for a User with Mobulity configured, without specifiying the device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122005 122005]
|}
With the PBX SOAP API a call can be initiated for a user, without specifying for which device the call should be initiated. In this case a default device is picked. If an application does this for a user with mobility, a restart happens because of a null pointer access.<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX CDRs: CDR was missing for calls rejected because of busy_on ... ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122014 122014]
|}
This was fixed in version 10 already and now merged back to version 9<br/><!--<br/>pbx.cpp<br/>-->
   
== Admin; The input field for the device name showed the url-decoded name ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122076 122076]
|}
If a name with '+' or '%' was configured as device name, these charecters were nocz displayed correctly in the input field.<br/><!--<br/>command.cpp<br/>-->
   
== phone: do not mute microphone in alerting state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122205 122205]
|}
For some some analogue endpoints it is not possible to detect when the media connection is really established, it may hapen before connect is signaled to the phone. To prevent confusion when voice is received from remote but the answer is supressed the microphone is unmuted now already in alerting state by default.<br/>The former behaviour can be restored by<br/>  config add PHONE APP /mute-while-dialing 1<br/><br/><!-- app_cfg.cpp app_cfg.h app_ctl.cpp -->
   
== phone recording - supress calling tones and call status display for calls to recording device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122221 122221]
|}
<!-- app_call.cpp app_ctl.cpp app_ctl.h app_disp.cpp phonesig.cpp phonesig.h -->
   
== Adjusting the Volume level of Local Playback of DTMF Tones - Marcus Mlbsch  ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122706 122706]
|}
The customer complained that DTMF feedback tones to the user were too loud. There was one obvious reason in the sources: the table of VoiceOutputGain steps was not in sync with the table of SignalLevel steps, i.e. the relation between speech and DTMF level differed depending on the volume setting. The other point is that DTMF tones are perceived louder than the lower frequency call progress tones. Therefore adjusted the SignalLevel steps to correlate with the VoiceOutputGain steps and introduced 6 dB extra attenuation for DTMF tones compared to call progress tones.
   
== SIP: Bug in media negotiation when processing reINVITE without SDP offer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122780 122780]
|}
Bug in media negotiation when processing reINVITE without SDP offer.<br/>Exclusive codec config got lost during call.<br/><br/><!-- sip.cpp -->
   
== SIP: Mobility did not work with SIP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122942 122942]
|}
Mobility did not work with SIP since RTP-DTMF was ot suppressed.<br/><br/><!--sip.cpp-->
   
== IP-DECT: Trace and variable check added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=121496 121496]
|}
Trace and variable check in IP-DECT master added to give some hints of bugs.<br/><br/><!--<br/>Changed file:<br/>dectmaster.cpp<br/>-->
   
= V9 Hotfix 39 (9061388) =
Changes included in Version 9 hotfix39<!---->
[http://mantis.innovaphone.com/view.php?id=122914 Definition]
 
 
   
== FXS: Trap on very rare race collision of retrieve with call release ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122980 122980]
|}
If a retrieve happens at the same time as a call release of the held call, a trap could happen. The propabilty of this to happen was very low.<br/><!--<br/>relay.cpp<br/>-->
   
== phone: ip241: 'Ok' key inserts newline characters in number/name input fields ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=123369 123369]
|}
This way numbers may be misinterpreted as names.<br/><br/><!-- forms_color.cpp -->
   
== IP222 IP232: Propietary SmartEEE disabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=124415 124415]
|}
Needed for some PCïs that loose the link with EEE.<br/><br/>This is caused by the "propietary smartEEE " feature of the ethernet phy.<br/>When disabled the link is stable<br/><br/>Regular EEE still works.<br/><br/><!-- orchid_drv.cpp -->
   
= V9 Hotfix 40 (9061390) =
Changes included in Version 9 hotfix40<!---->
[http://mantis.innovaphone.com/view.php?id=124738 Definition]
 
 
   
== QSIG: Progress Indicator was missing in PROGRESS on call to Busy User ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=124957 124957]
|}
This did not do any harm, but an error log was generated in a Unify PBX.<br/><!--<br/>te_tbl.tbl<br/>-->
   
= V9 Hotfix 41 (9061392) =
Changes included in Version 9 hotfix41<!---->
[http://mantis.innovaphone.com/view.php?id=126573 Definition]
 
 
   
== phone: ip222,232: support Jabra UC VOICE 750 MS Duo Drk PN 7599-829-409 29/12/14 Version:A ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=126419 126419]
|}
Just another model of the Jabra UC VOICE 550/750 Series with a new product ID<br/><br/><!-- keys_hid.cpp, keys_ip222.cpp -->
   
== SIP: No reINVITE with updated identity was sent ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=126722 126722]
|}
No reINVITE with updated identity was sent on interfaces with media-relay and exclusive codec.<br/><br/><!--sip-->
   
== PBX: Node prefixes missing in CDRs from Broadcast object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=127131 127131]
|}
The number of the object which generated the CDRs shall contain the normalized number including all prefixes.<br/><!--<br/>pbx_bc.cpp<br/>-->
   
== phone: ip110,200,230,240: sometimes no DTMF tone was sent for a digit entered in an active call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=127693 127693]
|}
-
   
== CONF Interface: Noise on IP800/IP305 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=127695 127695]
|}
There are noise and peaks in a conference call on the IP800 and IP305 caused by the CONF interface. This is fixed now.<br/><!--<br/>Changed file:<br/>ipac_drv.cpp<br/>-->
   
== Phone sometimes returns to speaker-mode instead to release the call when going onhook ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=127990 127990]
|}
This could happen when handset was lifted while holding speaker key pressed or when the speaker was relased at the same time when the handset was lifted.<br/><br/><!-- forms_keyboard.cpp keys_gen.cpp keys_gen.h keys_ip11x.cpp keys_ip21x.cpp keys_ip230.cpp keys_ip240.cpp keys_ip241.cpp keys_ip222.cpp --><br/>
   
== IP-DECT: Default config change ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=128180 128180]
|}
There is a change in the default configuration which prevents a wrong configuration if a software factory reset is done with the command config clear. IP-DECT handover fails with the wrong configuration. This is fixed now.<br/><!-- Changed files:<br/>dect.h<br/>dect.cpp<br/>-->
   
== PBX Map: Hide Connected Endpoint, should be evaluated for calls thru Map ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=127834 127834]
|}
This is a feature introduced with v10, which is now merged back to v9<br/><!--<br/>pbx_map.cpp<br/>-->
   
= V9 Hotfix 42 (9061397) =
Changes included in Version 9 hotfix42<!---->
[http://mantis.innovaphone.com/view.php?id=128301 Definition]
 
 
   
== PBX: Avoid hanging calls after unsuccessful blind transfer to busy endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=128908 128908]
|}
Happen with a Multicast object: Call to multicast, then hold and another call to the same multicast object, which returns busy, then hangup, which initiates a blind transfer to busy endpoint.<br/><!--<br/>pbx.cpp<br/>-->
   
== Media Relay: Support for unknown audio codecs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=129907 129907]
|}
Support for unknown audio codecs (e.g. iLBC) when forwarding RTP audio (RTP-Proxy, Media-Relay).<br/><br/><!--<br/>medialib.h<br/>media.cpp<br/>sip.cpp<br/>channel.cpp<br/>-->
   
== Trap in PBX during boot after downgrade from v11 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=130015 130015]
|}
Trap in PBX during boot after downgrade from v11.<br/><br/><!--pbx.cpp-->
   
== phone: with optional recording a 3-party conference could not be established although recording was stopped ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=130286 130286]
|}
Call flow:<br/>- A calls B<br/>- B answers -> recording is started<br/>- A stops recording with redial-key<br/>- A opens a consultation call to C<br/>- C answers -> recording is restarted<br/>- A stops recording with redial-key<br/>When A presses the Menu-key a 3-party conference should be started.<br/>This did not work anymore since V9hotfix25 and not at all in V10. <br/><br/><!-- app_ctl.h app_ctl.cpp app_fkey.cpp --><br/>
   
= V9 Hotfix 43 (9061401) =
Changes included in Version 9 hotfix43<!---->
[http://mantis.innovaphone.com/view.php?id=130626 Definition]
 
 
   
== Voicemail failed in Chief+Secretary Scenario ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=114863 114863]
|}
Audio prompting didn't start<br/><!--<br/>pbx_vm.cpp<br/>-->
   
== ISDN: Call was rejected without cause on channel collision ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=131351 131351]
|}
This is a protocol violation and created unwanted log entries on the other side<br/><!--<br/>q931.cpp<br/>nt_tbl.tbl<br/>-->
   
== PBX Routing: A objcet shadowing a node escape should be used as node extern as default ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=131645 131645]
|}
So that for calls to a local trunk no node extern needs to be configured<br/><!--<br/>pbx.cpp<br/>-->
   
== IP-DECT: Debug for rare trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=131677 131677]
|}
A debug message in case of a rare bug is added.<br/><!--<br/>Changed files:<br/>dectmaster_if.cpp<br/>dectmaster.cpp<br/>-->
   
== IP-DECT: Feature codes trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=131806 131806]
|}
There can be a trap with feature codes caused by an uninitialized variable. This is fixed now.<br/><!--<br/>Changed file:<br/>dtmffty.cpp<br/>-->
   
== GUID generation fixed. Could result in duplicate GUIDs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=132117 132117]
|}
This could create problems in different places for example in Reporting when two CDRs with same GUID were sent.<br/><!--<br/>box.cpp<br/>command.cpp<br/>-->
   
== phone: ip222/232 - support for new Jabra EVOLVE headset series and for additional Plantronics Blackwire headsets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=130552 130552]
|}
-
   
== phone: ip222/232 - Config: Reject Automatically Connected Inbound Call routed to Headset if Headset is not plugged or disabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=130575 130575]
|}
Using the configuration given below an inbound call is automatically connected to the headset if a headset is plugged and enabled, otherwise the call is rejected with cause busy.<br/>  "Phone/User-x/Preferences/Announcement Calls/Micro On"<br/>  "Phone/User-x/Preferences/Announcement Calls/Treat any Call as Announcement"<br/>  "Phone/Preferences/Route Automatically Connected Inbound Calls to Headset (if enabled)"<br/>  "Phone/Preferences/Reject Automatically Connected Inbound Call routed to Headset if Headset is not plugged or disabled"<br/>The last checkmark affects only normal inbound calls. Announcement calls via the PBX MCAST-Announce object or via the "Dial/Announce" Function key will be routed to the speakerphone if no headset is plugged or if the headset is disabled. 
   
== phone: ip222/232 - added support for Jabra BIZ 2300 USB Duo headset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=132131 132131]
|}
<!-- keys_hid.cpp -->
   
= V9 Hotfix 44(9061405) =
Changes included in Version 9 hotfix44<!---->
[http://mantis.innovaphone.com/view.php?id=132402 Definition]
 
 
   
== SIP: Fix for trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=132389 132389]
|}
Fix for trap due to failed assertion.<br/><br/><!--sip.cpp-->
   
== SIP: Cannot call from SRTP endpoint to non-SRTP endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=132448 132448]
|}
If called non-SRTP endpoint rejects, the call is re-tried as RTP call without encryption.<br/>But no if the caller is a SIP endpoint.<br/><br/><!--sip.cpp-->
   
== PBX CDRs: Records for calls to objects without registrations were missing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=132656 132656]
|}
Old fix from v10 merged to v9<br/><!--<br/>pbx.cpp<br/>-->
   
= V9 Hotfix 45 (9061408) =
Changes included in Version 9 hotfix45<!---->
[http://mantis.innovaphone.com/view.php?id=133797 Definition]
 
 
   
== PBX Waiting: Cause got lost, when disconnecting a waiting calls with SOAP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=133887 133887]
|}
The call was disconnected without cause, which typically resulted in a display "call aborted" on the calling endpoint instead of "user busy" which could be desired by the application.<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== IP305, include interface licenses in firmware ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=133913 133913]
|}
IP305 is sold with full interface licenses only<br/><!--<br/>ip24.cpp<br/>-->
   
== myPBX 9: Script error when using popup windows ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=134965 134965]
|}
After an update, Internet Explorer 11 showed a script error "Access Denied" when using popup windows in myPBX 9. This problem only occured when using the myPBX launcher.<br/><--<br/>client.js<br/>-->
   
== AD Replication: Oversized AD Objects Deleted Replicated Objects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=135034 135034]
|}
An internal error code wasn't set by a handling for the resulting decoding failure. The internal error code is now set to error=86, "LDAP Decoding Error".<br/>The replication will stop consequentially.<br/>Actual cause were the AD objects being member in too many AD groups.<br/><!--<br/>ldapapi.cpp/.h<br/>adrep.cpp<br/>ldapdir.cpp/.h<br/>ldaprep.cpp/.h<br/>-->
   
== phone: ip222,232: audio connection to remote conference peer sometimes lost after a coder renegotiation on one connection ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=135080 135080]
|}
This problem occured in the folllowing situation:<br/>- a local call (audio+video) was established via an USB headset and then put on hold<br/>- a consultation call (audio) to an external peer was established<br/>- a 3-pty conference was established but the local connection remained mute<br/><br/><!-- ac_phone_3.h ac_phone_3.cpp ac_codec3.cpp --><br/>
   
== Trap: Flash Directory: LDAP Substring Search Caused MAX_BUSY_TICKS ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=135368 135368]
|}
Consequtive asterisks weren't skipped.<br/><!--<br/>lib/str.cpp<br/>-->
   
= V9 Hotfix 46 (9061415) =
Changes included in Version 9 hotfix46<!---->
[http://mantis.innovaphone.com/view.php?id=138470 Definition]
 
 
   
== PBX/IP6000: Potential restart if there are groups or boolean objects with non-Ascii characters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=111560 111560]
|}
This is a general problem that the strcmp from the standard lib does not work correctly under very special conditions.<br/><!--<br/>ip6000.cpp<br/>-->
   
== Incomplete HTTP responses from HTTP server in certain circumstances ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=138895 138895]
|}
It might have happened, that the HTTP server closed the underlying TCP connection before all data could be sent.<br/><br/><!--<br/>http.cpp<br/>-->
   
== FAX Interface: Hanging calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=139602 139602]
|}
If a call setup to the FAX interface includes a user-user-information element, the call hangs. This is fixed now.
   
== SIP: Remove all bindings did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=140071 140071]
|}
A REGISTER with "Contact: *" was not handled as it should.<br/><br/><!--sip.cpp/h-->
   
== IP-DECT: Reverse phone book search configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=140086 140086]
|}
The IP-DECT reverse phone book search accepts a configuration with phone number types like e164:H,mobile:M now.
   
== H.323: Call to a Call Broadcast Destination failed under special conditions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=140491 140491]
|}
DTMF dial from a Waiting Queue to a Call Broadcast object with many destinations. This caused special timing in H.323, which created the problem.<br/><!--<br/>h323sig.cpp<br/>pbx.cpp (v9)<br/>signal.cpp (v9)<br/>signal.h (v9)<br/>-->
   
= V9 Hotfix 47 (9061418) =
Changes included in Version 9 hotfix47<!---->
[http://mantis.innovaphone.com/view.php?id=140627 Definition]
 
 
   
== SIP: Switch from Media-Relay to No-Media-Relay when handling INVITE with Replaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=139046 139046]
|}
Switch from Media-Relay to No-Media-Relay when handling INVITE with Replaces.<br/>May result into no media after INVITE with Replaces.<br/><br/><!--relay.cpp-->
   
== PBX: OEM Registration licenses did not work anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=142371 142371]
|}
New handling of license versions broke the OEM licenses<br/><!--<br/>inno_lic.cpp<br/>-->
   
== PBX Waiting: Cause got lost, when disconnecting a waiting calls with SOAP (again) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=142458 142458]
|}
Previous fix did not work<br/><!--<br/>pbx_wait.cpp<br/>pbx_xml.cpp<br/>-->
   
== IP-DECT: Master trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=143206 143206]
|}
There is a Master trap because of an uninitialized variable within a facility call. This is fixed now.
   
= V9 Hotfix 48 (9061420) =
Changes included in Version 9 hotfix48<!---->
[http://mantis.innovaphone.com/view.php?id=143584 Definition]
 
 
   
== PBX: Execute CFB on Trunk/Gateway objects, if the far endpoint rejects call with busy ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=143675 143675]
|}
This is useful to do re-routing in case of a called service is busy<br/><!--<br/>pbx.cpp<br/>-->
   
== HTTPCLIENT: trap when an application cancels a request inmidst  DNS-name resolution ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=143738 143738]
|}
<!-- httpclient_i.cpp httpclient_i.h -->
   
== Memory leak in the hardware encryption driver of the IP6000 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=143945 143945]
|}
Under excessive load some packets allocated in memory were sometimes not freed in the hardware encryption driver of the IP6000.
   
== Fixed possible trap on CF card error ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=144019 144019]
|}
The box might have trapped on CF card errors (card full, invalid data read etc.)<br/><br/><!--<br/>fat32.cpp<br/>-->
   
== Phones: Partner fkeys with subscriptions or favourites may not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=144707 144707]
|}
Partner fkeys with subscriptions or favourites may not work in some cases.<br/>But only if partner's name is used as destination<br/>and if namesmatch partly.<br/>E.g. "name" and "name.x"<br/><br/><!--phonesig.cpp-->
   
== IP6000: Prevent blinking error LED on old IP6000 with HW-Build 201 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=147092 147092]
|}
Conference DSP driver was started on old hardware that doesnt support the conference DSP<br/><!-- adsp2191_drv.cpp -->
   
= V9 Hotfix 49 (9061421) =
Changes included in Version 9 hotfix49<!---->
[http://mantis.innovaphone.com/view.php?id=145269 Definition]
 
 
   
== LDAP: Trap in Flash Directory UI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=145405 145405]
|}
A deleted memory region was re-accessed.<br/><!--<br/>flashdir.cpp<br/>-->
   
== IP-DECT: Wrong name with reverse phone book search ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=145482 145482]
|}
If there is a similar number in the LDAP directory, the number can be resolved in a wrong name. This is fixed now.<br/><!--<br/>Changed file:<br/>dectradio_mastercall.cpp<br/>dectmaster.cpp<br/>quickdb.h<br/>quickdb.cpp<br/>-->
   
== IP-DECT: Phone book search filter ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=145556 145556]
|}
The configured phone book search filter isn't considered in the search string. This is fixed now.
   
== Licenses containing digits (e.g. G729channel) did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=146486 146486]
|}
Problem parsing the license string<br/><!--<br/>inno_lic.cpp<br/>-->
   
= V9 Hotfix 50 (9061427) =
Changes included in Version 9 hotfix50<!---->
[http://mantis.innovaphone.com/view.php?id=147331 Definition]
 
 
   
== SIP: Changed handling of History-Info header and stop sending Diversion header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=147429 147429]
|}
Trying to comply to RFC-7044 and RFC-7131.<br/><br/>Decoding: Skip top-most entry "History-Info" (highest index value) if this entry reflects the called party itself.<br/><br/>Encoding: Add top-most entry "History-Info" (highest index value) that reflects the called party itself.<br/><br/>SIP header "Diversion" is removed since it is declared as deprecated (RFC-5806 Category Historic now).<br/><br/><!--<br/>sip.cpp<br/>siptrans.cpp<br/>-->
   
== OEM Registration licenses did not work anymore ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=150069 150069]
|}
Collateral damage of fix: #146486: Licenses containing digits (e.g. G729channel) did not work
   
== SHA-2 hash algorithms ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113239 113239]
|}
Port the hash algorithm to our platform.<br/><br/><!--<br/>sha256.c<br/>sha512.c<br/>sha.h<br/>md32_common.h<br/>opensrc.mak<br/><br/>test_tls.h<br/>test_tls.cpp<br/><br/>11.00/unit-tests/tls/encryption<br/>--><br/>
   
== Support for SHA2 certificates ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113352 113352]
|}
* encoding and decoding<br/>* verification<br/>* create such certificates on boxes (except sha224)<br/><br/>Signature algorithms:<br/>* sha224WithRSAEncryption { pkcs-1 14 }<br/>* sha256WithRSAEncryption { pkcs-1 11 }<br/>* sha384WithRSAEncryption { pkcs-1 12 }<br/>* sha512WithRSAEncryption { pkcs-1 13 }<br/><br/><!--<br/>common/protocol/tls/x509.cpp<br/>common/protocol/tls/x509.h<br/>common/protocol/tls/certificate_create.xsl<br/>common/protocol/tls/certificate.xsl<br/>common/protocol/tls/request.xsl<br/>common/lib/rsa.cpp<br/>common/lib/rsa.h<br/>common/ciphers/cipher_api.cpp<br/>common/interface/cipher_api.h<br/>common/interface/oids_asn1.h<br/>-->
   
= V9 Hotfix 51 (9061429) =
Changes included in Version 9 hotfix51<!---->
[http://mantis.innovaphone.com/view.php?id=150421 Definition]
 
 
   
== Fax server: Wrong error correction ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=151280 151280]
|}
The error correction doesn't work if it is necessary. It results in missed document parts or failed connections. This is fixed now.<br/><!--<br/>Changed files:<br/>facsimile_ECM.h<br/>facsimile_ECM.cpp<br/>-->
   
== PBX: CFB on Trunk or Gateway did not work if the call was cleared with DISC ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=151934 151934]
|}
This happend for example on ISDN interfaces with in-band busy tones<br/><!--<br/>pbx.cpp<br/>-->
   
== PBX: Twin Phone algorythm did not work for transfer/recall ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=152169 152169]
|}
A recall after a transfer should also use the twin phone algorythm. For example if one of the phones is busy, the call should be sent to the busy phones only.<br/><!--<br/>pbx.cpp<br/>-->
   
== SIP: New config option /send-deprecated-diversion-header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=152337 152337]
|}
Diversion header is not sent anymore since v11r1sr5 / v11r2sr1 / v10sr24 / v9hotfix50.<br/>For interop reasons this config option is added.<br/>If set the old and deprecated Diversion header is sent.<br/><br/><!--<br/>sip.cpp<br/>siptrans.cpp<br/>-->
   
= V9 Hotfix 52 (9061432) =
Changes included in Version 9 hotfix52<!---->
[http://mantis.innovaphone.com/view.php?id=152676 Definition]
 
 
   
== Web-UI: Font-family of input, select, textarea, button did not inherit body style ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=153879 153879]
|}
Font-family of input, select, textarea, button did not inherit body style.<br/>Using now "font-family:inherit" to have same font-familiy all over.<br/><br/><!--work.css-->
   
== IP-DECT: Fix for "Wrong name with reverse phone book search" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=154071 154071]
|}
Since the fix "Wrong name with reverse phone book search" it doesn't work. This is fixed again.<br/><!--<br/>Changed file:<br/>dectradio_mastercall.cpp<br/>-->
   
== IP2x P30x IPxx10: Tone is sometimes not switched off ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=153129 153129]
|}
-
   
= V9 Hotfix 53 (9061433) =
Changes included in Version 9 hotfix53.<!---->
[http://mantis.innovaphone.com/view.php?id=155088 Definition]
 
 
   
= V9 Hotfix 54 (V9 Hotfix 54 (9061435) =
Changes included in Version 9 hotfix54.<!---->
[http://mantis.innovaphone.com/view.php?id=165495 Definition]
 
 
   
== PBX SOAP: Remote number update missing on blind transfer on another PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=166764 166764]
|}
The CT-COMPLETE facility used to transmit the new number, was not used to update SOAP call<br/><!--<br/>pbx.cpp<br/>-->
   
== IP-DECT: Forced logout does not store CKI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=167108 167108]
|}
If an users logs in a handset and a previously used handset is logged out, the cipher key index for early encryption isn't saved for this handset. This is fixed now.
   
== CF/SATA driver: Disturbs Linux SATA driver at start-up ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=167567 167567]
|}
The innovaphone CF/SATA driver can disturb the Linux SATA driver at Linux start-up, Linux recognizes a spurious interrupt and disables wrongly the SATA interrupt. The SATA device doesn't work or works slowly. This is fixed now.
   
= V9 Hotfix 55 =
Changes included in Version 9 hotfix55.<!---->
[http://mantis.innovaphone.com/view.php?id=168340 Definition]

Revision as of 14:24, 5 April 2016

This is the Firmware V9 Roadmap Document.

The release date of the next Hotfix is planed for the second monday of a month. Please note that this a scheduled and no fix date.

This article is generated automatically. Do not edit! Please see the disclaimer before using the information presented here!


SQLSTATE[HY000] [2002] Es konnte keine Verbindung hergestellt werden, da der Zielcomputer die Verbindung verweigerte. 1

Retrieved from "https://wiki.innovaphone.com/index.php?title=Reference9:Release_Notes_Firmware&oldid=41137"