Howto:What Ports are used for Signaling and Voice Traffic in SIP and H.323?: Difference between revisions
mNo edit summary |
mNo edit summary |
||
Line 69: | Line 69: | ||
(Smallest range to be configured is128) | (Smallest range to be configured is128) | ||
[image:What_Ports_are_used_for_Signaling_and_Voice_Traffic_in_SIP_and_H.323vPortsused.PNG] | |||
Revision as of 12:48, 29 May 2007
What Ports are used for Signaling and Voice Traffic in SIP and H.323?
Applies To
This information applies to
- All innovaphone products
Build V6 and later
More Information
Here is described what ports are used for signaling and voice traffic.
For network, priority firewall and third party product settings
Signaling
SIP
SIP Phone Registration 1 UDP:5060
SIP Phone Registration 2..n UDP: any free
PBX UDP:5060
Gateway Interfaces "Registrar" UDP:5060
Gateway Interfaces "Without Registration" UDP:5060
Gateway Interfaces "Register as… " UDP:any free
H.323
Phone Registration 1 UDP:1718, UDP:1719, TCP:1720
Phone Registration 2..n UDP:any free, UDP:any free, TCP:any free
PBX UDP:1718,UDP:1719,TCP:1720
Gateway Interfaces "Gatekeeper" UDP:1718,UDP:1719,TCP:1720
Gateway Interfaces "Without Registration" TCP:1720 (no RAS)
Gateway Interfaces "Register as ..." UDP:any free, UDP:any free, TCP:any
T.38 via H.323 or SIP
The T.38 UDP Port is always 2 Ports above the RTP-Port
Voice Traffic (RTP)
For one voice connection there is only one RTP port in use and one RTCP port .
So every call takes 2 ports, that’s any free UDP-ports what is chosen by the
RTP port range. The RTP port range is per default from 16384 to 32767
This UDP-RTP port range can be configured (is used then for H.323 and SIP calls)
Enter the first UDP - port and the number of ports
(Smallest range to be configured is128)
[image:What_Ports_are_used_for_Signaling_and_Voice_Traffic_in_SIP_and_H.323vPortsused.PNG]
Config option – Fixed RTP port
The config option “Fixed RTP-Send Port xxx ” is not in the GUI configurable.
You have to add this in the config file. For all connection this one
configured RTP port is used. This Fixed RTP-Send Port is detached from the RTCP port.
But we strongly advise not to configure this, because the RTP is not working symmetric anymore and this can bring many interoperability problems with third party endpoints.