Reference8:Release Notes Firmware: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
m (regular roadmap update)
 
m (regular roadmap update)
Line 1: Line 1:
This is the Firmware V8 Roadmap Document.<br/>
This is the Firmware V8 Roadmap Document.<br/>
<br/>
<br/>
This article is generated automatically. Do not edit!
Please see ''[[Support:What is the DVL-Roadmap?|the disclaimer]]'' before using the information presented here!
   
= V8 Hotfix  1 (10-80500.01) =
Fixes included in Version 8 hotfix1
[http://mantis.innovaphone.com/view.php?id=47564 Definition]
== New Features ==
   
=== incorrect pointer assignment in submit_config of dtmf/icp object and false configuration possibility ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47716 47716]
|}
problem: a) local buffer assigned to a given pointer<br/>        b) it was possible to configure just one of two needed e164 and if configured just one (which makes sense for pickup), the code was not correctly shown as enabled in configuration window.<br/><br/>solution: fix in code<br/> <br/>files: pbx_dtmf.h, pbx_dtmf.cpp, pbx_edit_dtmf-ctrl.xsl, pbx_icp.cpp<br/><br/>products: all pbx products<br/><br/>risks: None
   
=== dtmf feature code set presence used wrong argument to toggle the mobility ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47916 47916]
|}
problem: the feature code argument for toggling mobility was swapped<br/><br/>solution: use correct argument index<br/> <br/>files: pbx_dtmf.cpp<br/><br/>products: all pbx devices<br/><br/>risks: None
   
=== no presence note set if no activity has been selected ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48446 48446]
|}
problem: if the activity is empty, but a note given, no note was set for this presence index<br/><br/>solution: use note even if no activity is given<br/> <br/>files: pbx_dtmf.cpp<br/><br/>products: all pbx devices<br/><br/>risks: None
   
=== handle calls from master/slave user in dtmf object if calling number is found as mobility fork ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48448 48448]
|}
problem: if a call comes from the master/slave user, the dtmf object cancels the call, even if there is a user which has the calling number as mobility fork<br/><br/>solution: check mobility users for incoming master/slave calls and if a user is found, use this one<br/> <br/>files: pbx_dtmf.cpp<br/><br/>products: all pbx devices<br/><br/>risks: None
   
=== allow empty search base in directory search object ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48703 48703]
|}
problem: ldap server needs an empty search base, but the directory search object doesn't allow an empty one<br/><br/>solution: disable check for empty search base<br/> <br/>files: pbx_dirsearch.cpp<br/><br/>products: all pbx devices<br/><br/>risks: None
   
=== Potential trap accessing NULL pointer in PBX Waiting Object ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47563 47563]
|}
problem: There is a small chance of a NULL pointer access trap when doing confuguration changes on a Waiting Queue object right when a call is cleared<br/><br/>solution: Check for NULL pointer added<br/><br/>files: pbx_wait.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== One-way-voice after retrieve together with SRTP, H323 and Registration with password ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48442 48442]
|}
problem: One-way-voice could happen after retrieve, if SRTP is used on H.323 call, which uses a refistration with password. This could also happen when switching to a 3-pty conference (retrieve done on one leg). This is caused by an unencrypted SRTP key sent with the media renegotiation.<br/><br/>solution: Do encryption of the SRTP key.<br/><br/>files: h323sig.cpp<br/><br/>products: all<br/><br/>risks: Collateral damage with media negotiation
   
=== Display of hardware id missing for UNKNOWN Registrations ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48493 48493]
|}
problem: The Hardware Id is not displayed for Unknown Registrations on the Registrations page and is not copied into the edit page<br/><br/>solution: User Interface fixed<br/><br/>files: pbx_regs.xsl, pbx_edit_object.xsl<br/><br/>products: All with PBX<br/><br/>risks: None
   
=== When pressing apply on PBX Objects Node editor, the editor changed to a PBX editor ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48500 48500]
|}
problem: After apply the wrong .xsl was used (pbx_edit_loc.xsl instead of pbx_edit_node.xsl)<br/><br/>solution: Use correct .xsl<br/><br/>files: pbx_edit_node.xsl<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Trap if dialing wrong number from mobile phone ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48543 48543]
|}
problem: A trap happens if a mobile endpoint dials a wrong number and continues to dial when the busy tone is already played.<br/><br/>solution: Better handling of DTMF during playing busy<br/><br/>files: pbx_mobility.cpp<br/><br/>products: all with PBX<br/><br/>risks: Minimal risk of collateral damage
   
=== PBX: Trap if filter next config too long ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48554 48554]
|}
problem: If a PBX Filter is configured with a 'next filter' of a length more then 15 characters the PBX traps<br/><br/>solution: Check for length<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: none
   
=== If for one user two mobile endpoints are configured, no mobile endpoint could be called ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48571 48571]
|}
problem: Calls to a user with two mobile endpoints resulted in busy. If call-waiting was turned on, only one mobile endpoint was called.<br/><br/>solution: Algorythm to check if a call already exists for a mobile endpoint fixed<br/><br/>files: pbx_mobility.cpp, pbx_mobility.h, pbx.cpp, pbx.h, pbx_api.h, pbx_xml.cpp, pbx_dtmf.cpp<br/><br/>products: all with PBX<br/><br/>risks: Small risk of collateral damage with mobile endpoints
   
=== Call-Completion display at called phone not deleted if calling/called in same but not root node ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48580 48580]
|}
problem: The Call-Completion waiting display at called endpoint was not deleted after execution of call completion if calling and called endpoint in same but not root node. The mwiDeactivate used to deleted the display contained the wrong number. In a previous fix the mwiActivate which was also wrong was fixed, so before this fix it worked, because both contained the same wrong number<br/><br/>solution: Fix number in mwiDeactivate<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Progress Indicator 'Call not end to end ISDN' sent with each H.323 alert ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48597 48597]
|}
problem: The PI 'call not end to end isdn' was sent with each H.323 alert. But this progress code also indicates that in-band info is available, so a local ringback is sometimes turned of because of it.<br/><br/>solution: Do not send 'call is not end to end isdn'<br/><br/>files: relay.cpp<br/><br/>products: all gateway products<br/><br/>risk: Could be that some endpoints require this PI
   
=== Gateway Routing Table: Routing a call to a Gatekeeper registration using Name Out did not work anymore ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48608 48608]
|}
problem: When Name Out in a route was used to address a Gatekeeper registration this Name Out was sent with the call. This prohibited further routing of the call on the receiving side with overlap sending.<br/><br/>solution: Do not send Name Out with call if the name is used to identify Gatekeeper reg.<br/><br/>files: relay.cpp<br/><br/>products: all Gateway products<br/><br/>risks: Small risk that this name needs to be transmited for some special configurations
   
=== PBX/Node was added to config object when configuration was changed ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48612 48612]
|}
problem: When the configuration of a config object was changed (e.g. a Function key added to the phone config), the Node and PBX was set to the local PBX. The config object should never have a Node/PBX. The Node/PBX config could not be removed anymore.<br/><br/>solution: Do not add Node/PBX in this case<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Missing normalization of received diverting leg info ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48624 48624]
|}
problem: A diverting leg info received on a trunk or gateway object must be normalized to the PBX internal representation (number from root with all prefixes but without escapes) to be displayed correctly when sent to an endpoint. This normalization was missing.<br/><br/>solution: Normalization added.<br/><br/>files: pbx.cpp, pbx.h, pbx_api.h<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX: Dialing local objects without PBX config was not possible from different PBX ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48692 48692]
|}
problem: If an object is defined without PBX and Node, it is handled on each PBX as if it was configured for the local PBX/Node. Thus it should be possible to dial it on a given PBX by using the node prefix of this PBX. This was not possible if the local flag on the object was set as well.<br/><br/>solution: PBX routing fixed<br/><br/>files: pbx.cpp, pbx.h, pbx_api.h, pbx_dtmf.cpp<br/><br/>products: all with PBX<br/><br/>risks: Collateral damage within routing to 'local' objects<br/><br/>
   
=== Trap if T.38 timer expiry during closing of T.38 session ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48707 48707]
|}
problem: If a T.38 timer expired right within the fraction of a ms which it takes to close the T.38 session, a trap happened<br/><br/>solution: Stop timer before closing session<br/><br/>files: media.cpp<br/><br/>products: all<br/><br/>risks: None
   
=== PBX: As diverting number the real number was sent even if Send Number configured ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48718 48718]
|}
problem: The 'Send Number' should be sent as diverting number if configured<br/><br/>solution: Send 'Send Number' as diverting number if configured<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX: Reject external calls did not work as desired together with call forward ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48727 48727]
|}
problem: An endpoint with 'Reject Ext. Calls' set should not be able to forward external calls. An external call forwarded to an endpoint with 'Reject Ext. Calls' set should succeed.<br/><br/>solution: fixed<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: Could be that the old behaviour was desired in some installations
   
=== Potential trap when reconfiguring Gateway interfaces ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48833 48833]
|}
problem: If a gateway interface is reconfigured while calls are active a trap could happen later on.<br/><br/>solution: Better handling of reconfiguration<br/><br/>files: signal.cpp, signal.h<br/><br/>products: all<br/><br/>risks: none
   
=== Gateway: Trap if reconfiguring an analog interface registration with Feature Code support ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48838 48838]
|}
problem: If the reegistration configuration of an analog interface (e.g. changing registration name/no) was changed a trap happened when the registration was up again. Happened only with enabled Feature Codes.<br/><br/>solution: Better handling of reconfiguration<br/><br/>files: dtmffty.cpp, gk.cpp, relayfty.cpp, relayfty.h, relayfty_if.h<br/><br/>products: all with analog interfaces<br/><br/>risks: Minimal
   
=== PBX: Device configuration was lost, if PBX object was changed with SOAP Admin function ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48874 48874]
|}
problem: The <device/> tag could not be written with the SOAP Admin function, so this information was lost, when an object was changed or created using this method.<br/><br/>solution: Allow <device/> tag<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Master PBX to obtain licenses from another Master ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48938 48938]
|}
problem: There are configurations in which centralized licensing is desired but otherwise independent Master PBXs are needed.<br/><br/>solution: Configuration option added to allow a slave to register at a master to obtain licenses, but act as master in all other respects<br/><br/>files: pbx.cpp, pbx.h, pbx_general.xsl<br/><br/>products: all with PBX<br/><br/>risks: Minimal
   
=== Do not allow special characters for Kerberos realm names ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47634 47634]
|}
Problem: On the General/Kerberos page the name of the server realm was not checked. Only domain style names should be allowed.<br/><br/>Solution: Allow only A-Z a-z 0-9 . -<br/><br/>Files: kerberos_db.cpp<br/><br/>Products affected: Gateways<br/><br/>Risk: No risk
   
=== Timing problem at the first request to a Kerberos server ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48380 48380]
|}
Problem: Currently there is a timing problem when a Kerberos server receives its very first ticket request. To answer this (and any following) requests the server needs its own secret key. The current flow is that the server calculates this key, answers the request and then writes the key to the database. Until the key has been written all following requests will be answered with a Kerberos error message. As a consequence the very first try to join the Kerberos realm fails.<br/><br/>Solution: The server has to wait until the key has been written to the database before it answers the first request.<br/><br/>Files affected: kerberos_ldap.h, kerberos_ldap.cpp, kerberos_db.cpp<br/><br/>Risk: small
   
=== "vars del" does not delete additional administrator accounts ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48400 48400]
|}
Problem: The "vars del" command preserves all VARS with the name prefix CMD0. Therefore the additional administrator accounts and other module configuration are not reset. This problem occurs on factory resets and config updates.<br/><br/>Solution: Preserve only "CMD0/AUTH" when executing the "vars del" command.<br/><br/>Files affected: command.cpp<br/><br/>Risks: none
   
=== Trap when configuring empty realm name for Kerberos server ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48405 48405]
|}
Problem: On the General/Kerberos page the box traps when the user removes the realm name and clicks the Ok button.<br/><br/>Solution: Fix processing of form.<br/><br/>Files: kerberos_db.cpp<br/><br/>Risks: none
   
=== Configuration of _KADMIN_ password ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48504 48504]
|}
Problem: On the PBX/Security page the _KADMIN_ password can only be deleted by removing it from the first one of the two input fields. This is inconsistent with the configuration of the other users that can also be deleted by removing the password from both input fields.<br/><br/>Solution: Implement the deleting of the _KADMIN_ password in a consistent way: Removing the password from the first or both fields removes the _KADMIN_ user.<br/><br/>Files: pbx_admin.cpp, pbx_password.xsl<br/><br/>Risks: Small risk of collateral damage
   
=== Remove memory leak in kerberos client ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48720 48720]
|}
Problem: When the decryption of a Kerberos ticket fails a memory leak is left. Also the Kerberos client does not report this to the application.<br/><br/>Solution: Fix protocol implementation and Kerberos client.<br/><br/>Files: kerberos_prot.cpp, kerberos_client.cpp<br/><br/>Risk: none
   
=== Leaks with DECT signalling using TLS ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48794 48794]
|}
Problem: Sometimes the TLS sockets that are used by DECT signalling are not deleted because of a shutdown event collision in the TLS socket<br/><br/>Solution: Fix TLS shutdown flow<br/><br/>Files: tls.cpp<br/><br/>Risk: Collateral damage with other applications using TLS
   
=== Trust manufacturer root certificate by default if there is no certificate in flash ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48861 48861]
|}
Problem: New devices are equipped with a certificate chain stored in first flash segment. The devices will add the root certitificate to the trust list at first boot. If there is no certificate in flash this will not happen. Hence staging with HTTPS-based update scripts did not work on legacy devices.<br/><br/>Feature: Add a OEM specific manufacturer certificate in the product_info in the firmware. If present, this certificate will be trusted after factory reset, if there is no certificate in flash.<br/><br/>Files: box.cpp, box.h, os.h, ipXXX.cpp, x509.cpp<br/><br/>Risk: Collateral damage on the X509 module and product_info mechanism
   
=== Presence subscription to external user failed when forwarded through PBX object "Gateway" ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48791 48791]
|}
Problem: "Gateway" object did not remove its prefix when forwarding subscription.<br/><br/>Solution: Remove prefix when forwarding presence subscription.<br/><br/>Files: pbx.cpp<br/><br/>Products affected: PBX<br/><br/>Risk: No risk.
   
=== PBX Broadcast Conference Option ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47886 47886]
|}
problem: It should be possible to configure if the last remaining user in a conference call should be disconnected or not.<br/><br/>solution: New configuration option implemented.<br/><br/>files: pbx_bc_conf.h, pbx_bc_conf.cpp, pbx_edit_bc_conf.xsl.<br/><br/>products affected: All devices with PBX.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT OEM  user database import/export ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47889 47889]
|}
problem: New functions for OEM import/export of user data like export filter, ipei checksum or error messages.<br/><br/>solution: Functionality implemented.<br/><br/>files: dectusers_if.h, dectusers.h, dectusers.cpp, OEM xsl files.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT idle display update ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47891 47891]
|}
problem: Idle display update does not work for DECT handsets.<br/><br/>solution: Functionality implemented, but it must be enabled over the GUI and must not be used if foreign handsets are used.<br/><br/>files: dectmaster.h, dectmaster.cpp, dectmaster.xsl.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT GUI Authentication Code ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47892 47892]
|}
problem: The configuration option for the System Authentication Code is not shown.<br/><br/>solution: Fixed.<br/><br/>files: dectusers.xsl.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage. Only GUI change.
   
=== IP-DECT RTP stream of second hold call ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47894 47894]
|}
problem: The RTP stream of the second call is not stopped if the call is hold and an unattended call transfer is initiated.<br/><br/>solution: RTP stop event added.<br/><br/>files: dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT handset product id/software version ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47897 47897]
|}
problem: There is no possibility to see the handset product id and software version.<br/><br/>solution: Tool-tip with the product id and software version of the handset has been added for the IPEI item in the GUI user list. It will be available after restart of the handset.<br/><br/>files: dectmaster.cpp, dectradio.cpp, dect_users_right.xsl(OEM).<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT OEM module software update ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47934 47934]
|}
problem: There are new software versions of the OEM software modules: BMC interface software, MSF module and Skinny protocol.<br/><br/>solution: OEM modules replaced.<br/><br/>files: DECT files, MSF files, Skinny files, config.h, fty.h, fty.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Normal risk of collateral damage. Updated from improved OEM branch.
   
=== IP-DECT MSF module login ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47984 47984]
|}
problem: It is not possible to login to the MSF module.<br/><br/>solution: Function signature changed with the new MSF module version.<br/><br/>files: dectmsf.h, dectmsf.cpp, telnet.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage. Updated from improved OEM branch.
   
=== IP-DECT GUI MWI numbers ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48411 48411]
|}
problem: The configuration options for MWI numbers are not shown.<br/><br/>solution: Fixed.<br/><br/>files: dectfty.xsl.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage. Only GUI change.
   
=== IP-DECT SARI variable ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48436 48436]
|}
problem: The SARI variable is updated every configuration change, but is not needed in OEM modules.<br/><br/>solution: Update condition fixed.<br/><br/>files: dectlocalusers.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT facility entity memory leak ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48852 48852]
|}
problem: Facility entity objects aren't deleted in rare situations.<br/><br/>solution: Facility entity delete function call fixed.<br/><br/>files: dectmaster.cpp, dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== H450 debug info ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48889 48889]
|}
problem: Additional debug messages are needed for the h450_entity object.<br/><br/>solution: Debug info added.<br/><br/>files: h450.h, h450.cpp.<br/><br/>products affected: All devices with H323.<br/><br/>risk: No risk of collateral damage.
   
=== PBX BC conference object TAPI information ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48940 48940]
|}
problem: The broadcast conference object does not generate information for TAPI.<br/><br/>solution: Monitor connector added which generates the TAPI information.<br/><br/>files: pbx_bc_conf.h, pbx_bc_conf.cpp.<br/><br/>products affected: All devices with PBX.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT GUI user search ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48946 48946]
|}
problem: A wrong URL is generated if a question mark is typed in the user search field.<br/><br/>solution: Search field text encoding fixed.<br/><br/>files: dect_users_left.xsl.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage. Only GUI change.
   
=== Presence note ignored if presence activity has been set ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48863 48863]
|}
problem: Presence note ignored if presence activity has been set, the calling party expects to see both the activity and the note<br/><br/>solution: fixed in code<br/><br/>files: phone/app_disp.cpp<br/><br/>products: all telephones<br/><br/>risks: none<br/><br/><br/>
   
=== IP22 Interop with devices that do not support T38 redundancy and retransmits ===
{|
|Status
|<font><font color="green">Resolved</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47774 47774]
|}
problem: Some fax gateways (e.g. old avaya equipment) do not accept T.38 packet with redundancy or do no accept resent packets with the same sequence number<br/><br/>solution: DSP config added, use http://addr/AC-DSP0/info.xml?xsl=dsp.xsl to edit the settings.<br/><br/>files: ac_dsp3.cpp ac_dsp3.h ac_dsp3.mak dsp.xsl<br/>products: IP2x IP30x<br/>risks: Low
   
=== Modem interop problem ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48622 48622]
|}
problem: The modem bypass function does not work with some modems.<br/><br/>solution: Option to disable modem bypass added, pcm trace option added, new DSP code<br/><br/>files: ac_dsp3.cpp ac_dsp3.h dsp.xsl trace.xsl ac49?004.h ac49x_drv_*.h<br/><br/>products: ip22 ip24 ip28 ip302 ip305<br/><br/>risk: low risk<br/>
   
=== prevent creation of pbx dtmf object with char '#' in long name ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47805 47805]
|}
problem: it was possible to create a dtmf object with long name dtmf#join_group. If one then creates another dtmf object with long name dtmf and feature code join group enabled, it traps, because the object tries to create another user with dtmf#join_group as long name without check.<br/><br/>solution: disallow char '#' in long name of dtmf object<br/> <br/>files: pbx_dtmf.cpp<br/><br/>products: all pbx devices<br/><br/>risks: None
   
=== feature codes are not always working for mobility, if multiple mobility objects exist ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48602 48602]
|}
problem: if there are more than one mobility objects, mobility feature codes didn't work for users with the second (etc.) mobility object<br/><br/>solution: recursivly go through mobility objects when trying to find a user with a certain fork number<br/> <br/>files: pbx_dtmf.cpp, pbx.cpp, pbx.h, pbx_api.h<br/><br/>products: all pbx devices<br/><br/>risks: None
   
=== enabling mobility/cw didn't work for 2 stage dialing over mobility object ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48616 48616]
|}
problem: if a mobil client tries to call its mobility object first and then dials the corresponding feature code for mobility on/off (and mobility cw), it didn't work<br/><br/>solution: separate method for toggling mobility/cw on calling user object<br/> <br/>files: pbx_dtmf.cpp, pbx.cpp, pbx.h, pbx_api.h<br/><br/>products: all pbx devices<br/><br/>risks: None
   
=== use flashman erase on "reset to factory defaults" ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47983 47983]
|}
problem: when resetting telephones to factory defaults, first default registration survives the reset<br/><br/>solution: use flashman erase now<br/><br/>files: phone/admin/phone_admin.cpp<br/><br/>products: all telephones<br/><br/>risks: none known<br/><br/><br/><br/>
   
=== malloc must always run disabled ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47646 47646]
|}
problem: usually malloc is called only from disabled state. in some extremely rare cases (for example before a DRAM upload) it is called from enabled state and then an interrupt may cause assignment of the same memory chunk to different callers.<br/> <br/>solution: fix in code<br/> <br/>files: os.cpp<br/><br/>products: all products<br/><br/>risks: None
''Status:''
checked in to 9.00,8.00,09-80500
   
=== reduce phone firmware size by excluding unused LDAP components ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47709 47709]
|}
problem: references from flashdir module to fdirui object (flash dir user interface) force the inclusion of objects which are not used in the phone.<br/> <br/>solution: conditional compilation of flashdirui.cpp to prevent references, conditional linking of objects<br/> <br/>files: common/service/ldap/flashdir.cpp, common/service/ldap/ldap.mak, phone_inca.mak, ip72.mak, phone_coldfire.mak<br/><br/>products: all products<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== Config download must be supressed in phone training mode ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47713 47713]
|}
problem: Config download is not supressed in phone training mode.<br/> <br/>solution: fix in code<br/> <br/>files: phone_save_hdr.xml<br/><br/>products: all phones<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== provide uptime and local time of trap in debug log ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47855 47855]
|}
problem: sometimes it's helpful to know at which time of day and how long after boot a trap occured<br/><br/>solution: fix in code<br/> <br/>files: box.cpp<br/><br/>products: all<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== editing phone user config with IE failed for users with non-ascii chars in long name ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48017 48017]
|}
problem: the long user name was patched latin1 encoded into a xml file with encoding="utf-8"<br/> <br/>solution: fix in code<br/> <br/>files: pbx_phone.cpp<br/><br/>products: all PBX<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== ip2000/ip6000 - start ETH2 (virtual network connction for Linux) only when Linux is enabled ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48061 48061]
|}
problem: ETH2 was always started with the preconfigured fixed address 192.168.2.1/24. routing problems may occur if this network is used otherwise already. <br/> <br/>solution: start start ETH2 only when Linux is enabled, do not preconfigure an IP address on ETH2 <br/> <br/>files: linux_eth_drv.cpp, config.h<br/><br/>products: ip2000/ip6000<br/><br/>risks: None
''Status:''
checked in to 8.00,09-80500,9.00
   
=== IP 22/24/28/302/305 - provide more dynamic memory by disabling memory guard ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48576 48576]
|}
problem: memory guarding requires 8 byte per malloc'd item. For 50000 items as already seen on active boxes the overhead is 400000 byte. Because of the limited memory it's better to disable guarding.<br/><br/>solution: fix in code<br/> <br/>files: ip24.mak<br/><br/>products: IP 22/24/28/302/305<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== IP240-1000 - network connectivity lost  after restart of the physical layer controller because of spurious errors ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48785 48785]
|}
problem: the physical layer controller (PHY) of an IP240-100 is checked for spurious errors any second. If such errors are detected the controller is restarted. After restart data transfer from the phone CPU to the network was blocked. Data reception from network and transfer between LAN and PC port did work.<br/><br/>solution: fix in code<br/> <br/>files: inca_drv.cpp<br/><br/>products: IP 240-1000<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== "mod cmd UP0 scfg TFTP://..." does not work ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48911 48911]
|}
problem: saving config to a TFTP server fails because the update module was not triggered to send the next data chunk.<br/> <br/>solution: fix in code<br/> <br/>files: httpclient_i.cpp httpclient_i.h<br/><br/>products: all<br/><br/>risks: None
''Status:''
checked in to 9.00,8.00,09-80300,09-80500 
   
=== prevent to link useless exit code from library ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48937 48937]
|}
problem: for some some static objects the constructor registers exit handlers calling some library function. this is useless because we never call exit().<br/> <br/>solution: add dummy function to code<br/> <br/>files: box.cpp<br/><br/>products: all<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== "mod cmd UP0 prot TFTP://..." does not work ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48957 48957]
|}
problem: firmware upload from a TFTP server fails because of a missing 'complete' indication in last packet.<br/> <br/>solution: fix in code<br/> <br/>files: httpclient_i.cpp<br/><br/>products: all<br/><br/>risks: None
''Status:''
checked in to 9.00,8.00,09-80300,09-80500
   
=== permit to control the display format of names from local/PBX directory the same way as for external directories ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47731 47731]
|}
problem: some users want to control the name display format for inbound and outbound calls separately and to reorder/omit parts of a name. this already works for external directories but names from local or PBX directory were not displayed if the first name attribute was not configured for display because such names have only one, the 'cn' attribute.<br/><br/>solution: by default the full 'cn' is displayed for entries from local or PBX directory. if the format string starts with an asterisk ('*') 'cn' is tokenized and the tokens are ordered according to the requested format.<br/>  config add PHONE APP /name-display-in <format-in> /name-display-out <format-out>"<br/>'format-...' selects the name attributes to be displayed and their order.<br/>The default format is "123", i.e. all names are displayed as configured.<br/>"3" displays only the third attribute of a name from an external directory but the complete 'cn' from local or PBX directory.<br/>"*3" displays only the third attribute of a name from an external directory and only the third token (if any) of a 'cn' from local or PBX directory.<br/> <br/>files: app_call.cpp<br/><br/>products: all phones<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== default language setting from bootcode must be respected when setting phone default configuration ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48342 48342]
|}
problem: the default language for texts displayed on the phone may be set at manufacturing time. it's saved in the bootcode and evaluated at boot time. But because of some changes in config processing it was not included when gathering the basic configuration data and thus the phone alway started in german language.<br/> <br/>solution: fix in code<br/> <br/>files: phone_config.cpp<br/><br/>products: all phones<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== Kerberos for PBX-Realms did not work on IP302 and IP305 ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48347 48347]
|}
Problem: The processing of LDAP search results in the Kerberos realm tree was erroneous and therefore failed on devices of the IP28 platform.<br/><br/>Solution: Fix processing of LDAP search results.<br/><br/>Files affected: kerberos_db.cpp, kerberos_ldap.cpp<br/><br/>Risks: none
   
=== AD Replication. Only 10x In-Maps per Source Attribute Configurable ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47629 47629]
|}
Problem: Only 10x In-Maps per Source Attribute Configurable<br/><br/>Solution: Adjust to 40. Form submit method now POST (was GET).<br/><br/>Files: ldapmap.cpp, ldaprep.xsl<br/><br/>Products affected: PBX products<br/><br/>Risk: No risk.
   
=== VM: Trap, Double-Free after sending Email with Body ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48492 48492]
|}
problem: VM, trap, double free after sending email with body<br/><br/>solution: don't send such emails or apply fix<br/> <br/>files: smtp_mta.cpp<br/><br/>products: all pbx devices<br/><br/>risks: None
   
=== Show presence note (if available) instead of activity during ringback  ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47531 47531]
|}
Problem: When calling another PBX user, it's presence activity is displayed at the callers phone screen. Presenting called user's presence note is more appropriate.<br/><br/>Solution: Prefer 'note' over 'activity'.<br/><br/>Files: app_disp.cpp<br/><br/>Products affected: H.323 Phones<br/><br/>Risk: No risk.
   
=== Setup wizard does not accept new XML formatted license files ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48401 48401]
|}
Problem: When trying to upload an XML formatted license file while stepping through setup wizard no licenses are accepted. No error indicated neither.<br/><br/>Solution: Delegate upload to new XML style license handler.<br/><br/>Files: setup_lics.xsl<br/><br/>Products affected: All devices.<br/><br/>Risk: No risk.
   
=== Presence: Added overlay activity attribute ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48563 48563]
|}
Problem: External applications want to set/reset "on-the-phone" activity for a PBX user.<br/><br/>Solution: Added overlay activity attribute for each PBX user.<br/><br/>Files: pbx.cpp/h<br/><br/>Products affected: PBX<br/><br/>Risk: No risk.
   
=== RTP is sent to wrong destination ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48798 48798]
|}
Problem: A single packet causes the RTP stream to be redirected to a new destination (workaround for NAT). May cause no-media in case of late packet arrival after call transfer.<br/><br/>Solution: Only a continuous packet stream can cause the RTP redirection.<br/><br/>Files: media.cpp/h<br/><br/>Products affected: All devices<br/><br/>Risk: No risk.
   
=== Missing Tooltips in web ui for licenses ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47930 47930]
|}
Problem: Missing Tooltips in web ui for licenses.<br/><br/>Solution: Added tooltips.<br/><br/>Files: license.xsl<br/><br/>Products affected: All Gateway/PBX devices<br/><br/>Risk: No risk.
   
=== Reject of ectLinkIdRequest not handled ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48095 48095]
|}
Problem: When trying to pass a call transfer of two ISDN calls to the ISDN network by means of ECT ("External Transfer"), a reject was not handled properly.<br/><br/>Solution: Decode an provide error code to gateway.<br/><br/>Files: fty.h/cpp q950.cpp relay.cpp<br/><br/>Products affected: ISDN gateways<br/><br/>Risk: No risk.
   
=== Presence display on fkey 'Partner' stops updating ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48569 48569]
|}
Problem: Phone gives up on trying to to establish/re-establich presence subscription.<br/><br/>Solution: Don't stop trying to establish/re-establich presence subscription.<br/><br/>Files: phonesig.cpp<br/><br/>Products affected: Phones<br/><br/>Risk: No risk.
   
=== Phone: Handling of failed attended transfer ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48585 48585]
|}
Problem: An attended transfer may fail. If an error is encountered the call legs may disappear in the background. This happened regularly when a phone tried to transfer calls bound to different SIP registrations or to a SIP and a H323 registration.<br/><br/>Solution: Terminate both calls if attended transfer failed. Don't initiate transfers which which cannot be handled by SIP protocol.<br/><br/>Files: sip.cpp, phonesig.cpp, app_call.cpp<br/><br/>Products affected: Phones<br/><br/>Risk: No risk.
   
=== SIP: Fax and audio offer was rejected with 488 ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47544 47544]
|}
Problem: A combined SDP offer (fax and audio) was rejected with 488.<br/><br/>Solution: Answer with 200/OK and provide audio answer.<br/><br/>Files: sip.cpp/h<br/><br/>Products affected: SIP gateways<br/><br/>Risk: No risk.
   
=== SIP: INVITE rejected with 407 ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47631 47631]
|}
Problem: Registered SIP interfaces reject incoming calls with 407 if the INVITE comes from a remote source addr/port that doesn't match addr/port where the REGISTER was sent to.<br/><br/>Solution: Do not check remote source port.<br/><br/>Files: siptrans.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk.
   
=== SIP: Handling of weird simple-message-summary ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47714 47714]
|}
Problem: "Messages-Waiting:yes;Voice-Message:/0" turned MWI off. "Messages-Waiting:no;Voice-Message:8/0" turned MWI on.<br/><br/>Solution: "Messages-Waiting:yes;Voice-Message:/0" turned MWI on. "Messages-Waiting:no;Voice-Message:8/0" turned MWI off.<br/><br/>Files: sip.cpp<br/><br/>Products affected: SIP Phones<br/><br/>Risk: No risk.
   
=== SIP: Handling of transfer to different ip address ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47919 47919]
|}
Problem: MS Exchange transfers fax calls to external fax servers with REFER.<br/><br/>Solution: Follow this transfer and send new INVITE to destination address.<br/><br/>Files: sip.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk
   
=== SIP: Problem with media negotiation after 488 ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=47956 47956]
|}
Problem: After re-INVITE client transaction was rejected (e.g. 488) the next re-INVITE was not send. May result in one-way-audio.<br/><br/>Solution: Cleanup when handling reject for re-INVITE.<br/><br/>Files: sip.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk
   
=== SIP: Media negotiation problem at Alcatel Omni PCX ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48337 48337]
|}
Problem: Several provisional responses with changing remote RTP addresses may cause RTP to be sent to wrong destination.<br/><br/>Solution: Fix handling of updated SDP answers.<br/><br/>Files: sip.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk.
   
=== SIP: Interoperability to Aastra endpoints ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48406 48406]
|}
Problem: Calls broadcasted by WQ cannot be accepted by Aastra phones. Aastra phones sending 180 Ringing with SDP offer while requesting PRACK with SDP answer. SDP answer cannot provided at this early stage.<br/><br/>Solution: Send dummy answer in PRACK. Re-Negotiation will happen anyway after connect.<br/><br/>Files: sip.cpp/h<br/><br/>Products affected: PBXs serving SIP Phones<br/><br/>Risk: No risk.
   
=== SIP: No switch from local ringback tone to inband ringback tone ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48438 48438]
|}
Problem: No switch from local ringback tone to inband ringback tone, because 183/Progress response was not handled after 180/Ringing.<br/><br/>Solution: Handle 183 after 180.<br/><br/>Files: sipstate.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk.
   
=== SIP: Problems with DTMF when interworking v5 devices to SIP ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48441 48441]
|}
Problem: A call initiated by a v5 device that is interworked to SIP may have problems with DTMF.<br/><br/>Solution: Send SDP offer in INVITE as one single media description.<br/><br/>Files: sip.cpp<br/><br/>Products affected: SIP gateway and PBXs<br/><br/>Risk: No risk.
   
=== SIP: CSeq not correct inside dialog ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48533 48533]
|}
Problem: Requests within a dialog MUST contain strictly monotonically    increasing and contiguous CSeq sequence numbers (increasing-by-one).<br/><br/>Solution: Keep a private CSeq counter at each call object, subscription object and registration object.<br/><br/>Files: sip.cpp/h siptrans.cpp/h<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk.
   
=== Memory Leak ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48714 48714]
|}
Problem: Lost memory every time a registered SIP interface is deactivated.<br/><br/>Solution: Free allocated memory for authentication data.<br/><br/>Files: sip.cpp<br/><br/>Products affected: SIP endpoints<br/><br/>Risk: No risk.
   
== Bug Fixes ==
=== Other Bug Fixes ===
{|
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=49741 49741]
|valign=top nowrap=true|pme
|Number mistake if calls rerouted over ISDN by WAN overflow
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=48781 48781]
|valign=top nowrap=true|sga
|Federation mit GW object in der PBX
|}
   
= V8 Hotfix  2 (80500.04) =
Fixes included in Version 8 hotfix2
[http://mantis.innovaphone.com/view.php?id=49093 Definition]
== New Features ==
   
=== Configurable distinction of internal and external call ringing on analogue port ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49344 49344]
|}
For swiss users the internal call should be signaled with a ring sequence that is normally used for external calls and vice versa. Swiss seems to make an exception here. In addition it is now possible to configure 'always internal' and 'always external'.
   
=== wrong help url in ICP object ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49411 49411]
|}
problem: wrong help url for ICP object<br/><br/>solution: change url<br/><br/>files: pbx_edit_icp.xsl<br/><br/>products: pbx<br/><br/>riscs: absolutely none
   
=== fat32 check disc trap ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50204 50204]
|}
Problem: After a firmware trap with a cf card, the afterwards check disk can cause a trap loop, if directory entries are corrupt because of the first trap.<br/><br/>Solution: Increment counter which caused the trap loop.<br/> <br/>Files: fat32.cpp<br/><br/>Products affected: All gateways with CF slot<br/><br/>Risk: minor risk
   
=== wrong calculations causing check disc to damage data ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51305 51305]
|}
Problem: check disc could produce damaged data in certain situations<br/><br/>Solution: correctly calculate partial records and clusters for next run. Also check if clusters are used multiple times.<br/><br/>Files: fat32.cpp, fat32.h, fat32.xsl<br/><br/>Risk: minor risk
   
=== Possible trap when removing a cf card without previous unmount ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51705 51705]
|}
Problem: events where queued to not exisiting serial<br/><br/>Solution: cf driver shouldn't answer outstanding events after removing the cf card, as the fat32 module won't wait for any events after receiving status removed event<br/><br/>Files: cf_drv.cpp<br/><br/>Risk: minor risk
   
=== PBX: Reference to Config Template lost, when opening User from Registrations page ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49089 49089]
|}
problem: If a user object was opened from the Registrations page a configured config template was not displayed. By pressing Save or Apply the user object was written without the config template<br/><br/>solution: Display config template when opening user object from registrations page<br/><br/>files: pbx_regs.xsl<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Need to configure 'Route Root-Node External Calls to' in case of 'License Only' on Slave ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49137 49137]
|}
problem: A Slave or Standby-Slave PBX configured as 'License Only' did not allow to configure a Root Node Extern destination<br/><br/>solution: Allow configureation of Root-Node Extern<br/><br/>files: pbx_general.xsl<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Media Renegotiation from H.323 Slowstart to H.323 EFC failed accross multiple PBXs ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49147 49147]
|}
problem: The message with the new FeatureSet, which indicated a switchover from non-EFC to EFC was not forwarded by the PBX. This happens if a slow-start endpoint located at a slave transfers a call originating from another slave so that both new endpoints are EFC. The master in this case did not forward the switchover FeatureSet.<br/><br/>solution: forward FeatureSet<br/><br/>files: h323ch.cpp<br/><br/>products: all<br/><br/>risks: None
   
=== Gateway: Feature Code Support Configuration fixed ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49152 49152]
|}
problem: Feature Code fieldset was displayed even if not Feature Code support available. Sometimes empty Feture Code Fieldset<br/><br/>solution: Better checking in UI<br/><br/>files: relay_edit_phys.xsl<br/><br/>products: all gateway products<br/><br/>risks: None
   
=== Gateway: CGPN Map at route was executed even if the call using this route failed ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49175 49175]
|}
problem: A CGPN Map at a route was executed even if the call using this route failed. This was confusing if rerouting was configured in case a destination was not available.<br/><br/>solution: CGPN map not executed if call failed, so rerouting could be done with the same CGPN<br/><br/>files: gk.cpp<br/><br/>products: all gateway products<br/><br/>risks: Could be that there are configs depending on old, wrong behaviour
   
=== PBX: Sending of multiple group indications after registration did not work ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49190 49190]
|}
problem: If a phone registers to the PBX, the PBX is sending group indications for all active calls. If more then one call was active not all group indications were sent successful. This also happened with the update of Boolean function keys.<br/><br/>solution: Sending of Group Indications fixed<br/><br/>files: pbx_gi.cpp, pbx_gi.h<br/><br/>products: all with PBX<br/><br/>risks: Risk of collateral damage in the area of Group Indications
   
=== PBX: After CFNR from Waiting with end of first announcement no MOH during call proceeding/alerting ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49458 49458]
|}
problem: If a CFNR is executed at the end of the first announcement of a Waiting object (no second announcement), MOH should be played during call proceeding/alerting of the forwarded call. This did not happen, because MOH was turned off by accident with clearing of the announcement call.<br/><br/>solution: Don't turn off MOH<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: litte risk of other media problems within PBX
   
=== H.323, PROGRESS with cause treated as DISC causes problems ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49889 49889]
|}
problem: In H.323 no DISC message is defined. Because of that a PROGRESS message with Cause code was treated as a DISC message. This behaviour causes problems, because there is H.323 equipment sending PROGRESS with Cause even if no DISC is intended<br/><br/>solution: No special handling of PROGRESS with cause anymore<br/><br/>files: h323_tbl.h, h323sig.cpp<br/><br/>products: all<br/><br/>risks: old behaviour could be expected by other equipment
   
=== Enblock flag not evaluated on Routes to MAP ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49896 49896]
|}
problem: The enblock flag on routes to MAP could be set, but it did not do anything<br/><br/>solution: Evaluate enblock flag on routes to MAP<br/><br/>files: gk.cpp<br/><br/>products: All gateway products<br/><br/>risks: None, no change if enblock flag not set
   
=== One-way-voice after unpark/pickup together with SRTP, H323 and Registration with password ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49963 49963]
|}
problem: Within media renegotiation after unpark/pickup a wrong SRTP key was sent. This resulted in one-way media.<br/><br/>solution: Transmit correct SRTP key<br/><br/>files: h323sig.cpp<br/><br/>products: all<br/><br/>risk: Other media problems
   
=== PBX: No default device definition was added to new object ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49973 49973]
|}
problem: If a new object was added to the PBX, with a Name, but without device hw-id, no default device definition was created containing name has hw-id. After an unknown enpoint was assigned to this user by dialing the number of the user a registration with name was not possible anymore.<br/><br/>solution: Create default device definition<br/><br/>files: pbx_admin.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Media Negotiation between SIP and H.323 failed if Offer from both sides available ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50037 50037]
|}
problem: If a H.323 and a SIP call leg were to be connected and a media offer was available on both legs, nothing happend. The new offer should have been sent on the H.323 leg. This situation could happen in special cases with transfer and reverse media.<br/><br/>solution: Send offer on H.323 in this case<br/><br/>files: h323ch.cpp<br/><br/>products: all<br/><br/>risk: Small riks of collateral damage
   
=== PBX device definition with empty hw-id was generated for a user without name ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50043 50043]
|}
problem: For objects without device configurations, a default device is generated with the hw-id being the same as the Name of the object. This is for v7 compatibility. This was done even if there was no Name. But it was done only for a single object, because after that duplicate hw-id was detected. This caused registration with number being possible on this object even without device configuration.<br/><br/>solution: Check for empty name<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX: 'Route Internal Calls to' only works for internal destinations being users or slaves ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50068 50068]
|}
problem: It was explicitly implemented that 'Route Internal Calls to' was only executed for Users or Slaves. This was does not seem to be a usefull restriction.<br/><br/>solution: Restriction removed<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: Could be that this restrictions turns out to be usefull
   
=== PBX: On CFB configured at Slave PBX executed on max_calls, additional digits were added to called number ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50083 50083]
|}
problem: If a CFB on a Slave PBX was executed because max-calls, the original dialed digits should be added to the diverted to number. If the original dialed number did not exactly match a user in the slave, but additional digits were dialed, these digits were added twice.<br/><br/>solution: Add digits once only<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Trap if doing Pickup from analog interface with Feature Code ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50107 50107]
|}
problem: If a Pickup was performed from an anlog interface using Feature Codes, the gateway restarted. This was caused by an invalid cast.<br/><br/>solution: Cast fixed<br/><br/>files: relayfty.cpp, relay_api.h, relay.cpp<br/><br/>products: all gateway products with analog interfaces<br/><br/>risks: None
   
=== Mobility: Reject of call to mobile endpoint did not work ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50239 50239]
|}
problem: If a call on a mobile endpoint was rejected, on the calling side there was still ringback. Also a CFB was not executed in this case.<br/><br/>solution: Reject on mobile phone fixed<br/><br/>files: pbx.cpp, pbx.h, pbx_api.h, pbx_mobility.cpp, pbx_mobility.h<br/><br/>products: all with PBX<br/><br/>risks: Risk of collateral damage with Mobility
   
=== Mobility: Call to obeject within other PBX not in root node failed ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50241 50241]
|}
problem: Routing of calls from mobile endpoint, did not work with nodes on other PBXs<br/><br/>solution: Routing fixed<br/><br/>files: pbx.cpp, pbx.h, pbx_api.h, pbx_mobility.cpp, pbx_mobility.h<br/><br/>products: all with PBX<br/><br/>risks: Risk of collateral damage with Mobility
   
=== Mobility: Call forwarding on no response did not work for mobile endpoints if only mobile endpoint ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50242 50242]
|}
problem: A call forward on no response, either as CFNR or as no response destination at a trunk failed if only a mobile endpoint was present for a given object.<br/><br/>solution: Forwarding fixed<br/><br/>files: pbx.cpp, pbx.h, pbx_api.h, pbx_mobility.cpp, pbx_mobility.h<br/><br/>products: all with PBX<br/><br/>risks: Risk of collateral damage with Mobility
   
=== Trap if 'Escape Dialtone from' configured not being a User Object ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50267 50267]
|}
problem: If a 'Escape Dialtone from' destination was configured, which was not a User object (e.g. a Gwateway) a trap happend when a escape dialtone was to be played.<br/><br/>solution: NULL pointer access fixed<br/><br/>files: pbx.cpp, pbx.h, pbx_api.h<br/><br/>products: all with PBX<br/><br/>risks: Minimal
   
=== Mobility: Send presence info of called user with ALERT at call to mobile endpoint ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50349 50349]
|}
problem: When a mobile endpoint was called, the presence info of the mobile endpoint (typically there is no presence info available) was send to caller instead of the presence info of the related local user object.<br/><br/>solution: Send presence info of local user<br/><br/>files: pbx_mobility.cpp, pbx_api.h<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX object device config lost, if invalid info added somewhere else (e.g. duplicate number) ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50415 50415]
|}
problem: If a PBX object editor is opened and invalid information is added, then after Apply or OK the error message is displayed and the devices list was empty. After correcting the error and Apply or OK again the object is saved without the device list.<br/><br/>solution: Fill in device list on error as well<br/><br/>files: pbx_admin.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Potential trap with Mobility ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50989 50989]
|}
problem: A trap could happen with a collision of CFNR Timeout and call disconnect, when calling a mobile endpoint, because of NULL pointer access.<br/><br/>solution: Check for NULL pointer added<br/><br/>files: pbx_mobility.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Mobility Object returns busy if called from a unknown mobile phone ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51010 51010]
|}
problem: The mobility object answers calls only if called by a mobile phone which is configured as forking destination. Calls from other mobile phones are rejected. The cause "user busy" was used in this case, which was misleading.<br/><br/>solution: Use cause "Service unavailable, unspecified" instead.<br/><br/>files: pbx_mobility.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Potential trap when disconnecting call, WEBMEDIA-CH.5 default(82c09798): serial_event(814) ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51132 51132]
|}
problem: Under special timing conditions a trap could happen during call disconnect. This only happened if the call terminated at a physical interface on the given box.<br/><br/>solution: Cleaning up of media channel fixed<br/><br/>files: media.cpp<br/><br/>products: all<br/><br/>risks: None
   
=== PBX-CDR: Local Time wrong (same as UTC) ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51415 51415]
|}
problem: In the CDRs from the PBX the local time was always set to UTC<br/><br/>solution: Use correct time<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX: No Inband Disconnect for Gateway Object ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51421 51421]
|}
problem: 'No Inband Disconnect' was not configurable for Gateway objects<br/><br/>solution: Configuration added<br/><br/>files: pbx_edit_gw.xsl<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX CGPN missing with call to mobile endpoint, if not supplied by calling endpoint ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51424 51424]
|}
problem: If a calling endpoint registered to the PBX, did not supply the calling number, the PBX did not set it, when calling a mobile endpoint<br/><br/>solution: PBX sets calling number<br/><br/>files: pbx_mobility.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== no RTP-DTMF after rerouting ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51431 51431]
|}
problem: If rerouting happened from one media endpoint to another, for example if a TONE interface is used for a dialtone after one digit dialed there is a rerouting to another interface, RTP-DTMF does not work.<br/><br/>solution: Media renegotiation fixed for this case<br/><br/>files: ac_dsp.h, ac_dsp2.h, ac_dsp3.h<br/><br/>risks: none
   
=== dyn PBX General configuration page changes did not work sometime ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51436 51436]
|}
problem: Sometimes strange behaviour, when removing config like 'Route Master calls if no Master to' or 'Max Calls to Master'<br/><br/>solution: editor fixed<br/><br/>files: pbx_admin.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX: Retrieve was not sent in case of chained Waiting Queues ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51450 51450]
|}
problem: When using DTMF destinations with Waiting Queues, the waiting queue is sending a Hold Notific when DTMF map destination is alerting. A Retrieve Notific must be sent when the destination connects. This was missing if the destination was another Waiting Queue.<br/><br/>solution: Send missing Retrieve<br/><br/>files: pbx.cpp, pbx.h, pbx_api.h<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX: Busy Name was not sent if busy because of 'Busy on ... calls' ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51451 51451]
|}
problem: No Name Identification Facility was sent if call was busy because of 'Busy on ... calls'<br/><br/>solution: Send Name Id<br/><br/>files: pbx.cpp, pbx_api.h<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Config Wizard Update ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51501 51501]
|}
problem: Several issues with config wizard: CLIP no screening mappings for international calls wrong, CLIP no screening mappings did not handle internal numbers matching Trunk/National/International Prefix, switchboard waiting object was not configured, extern only needed for insert mode<br/><br/>solution: config wizard fixed<br/><br/>files: setup.cpp, ip800/config_wizard.txt, ip6000/config_wizard.txt, ip6010/config_wizard.txt, ip24/config_wizard.txt<br/><br/>products: IP30x, IP800, IP6000, IP6010
   
=== Problems with Mobility and Nodes ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51549 51549]
|}
problem: When calling from a mobile handset belonging to a user which is configured in a node a CLI without the node prefix was sent. Using a user configured in a node was not possible to use as mobile endpoint.<br/><br/>solution: handle node prefixes<br/><br/>files: pbx_mobility.cpp<br/><br/>products: all with PBX<br/><br/>risks: little risk of collateral damage with mobility
   
=== PBX: Pickup call did not show original called/parked endpoint ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51617 51617]
|}
problem: When doing pickup, the to be picked up call did not show what endpoint was called. This is especially a problem if group pickup is used with a function key without display<br/><br/>solution: Add ct_setup/leg2 info to pickup call<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== compatibility issue with PBX Waiting queue sending ct-complete before connect ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51620 51620]
|}
problem: If a call alerting at a PBX waiting queue is connected by a operator, the PBX is sending out a ct-complete message to indicate to the caller, which operator connected. This was sent right before the connect, but ct-complete is allowed by the standard only after connect. This created an interworking issue with when this was sent out to a QSIG PBX<br/><br/>solution: send ct-complete after connect<br/><br/>files: pbx_wait.cpp<br/><br/>products: all with PBX<br/>risks: none
   
=== PBX: SOAP initiated calls were sent with CT-SETUP ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51622 51622]
|}
problem: If a call was initiated by SOAP to the PBX, the outgoing call contained a CT-SETUP facility. This way the call was displayed as transfered call by the destination, but it should be displayed just the same as a call initiated on the phone itself.<br/><br/>solution: remove CT-SETUP from outgoing call<br/><br/>files: pbx_xml.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX send call to mobile phone as diverted call ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51623 51623]
|}
problem: Billing applications need to associate a call to a mobile phone to the respective user. This can be done with the diverting leg info.<br/><br/>solution: Add diverting leg info 2 to call to mobile phone<br/><br/>files: pbx_mobility.cpp, pbx_gi.cpp<br/><br/>products: all with PBX<br/><br/>risks: none
   
=== Assertion to verify that access to license data structures is correct ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51752 51752]
|}
problem: There is a hint, that access to license data structures could corrupt memory.<br/><br/>solution: Verify that access to license data structures is correct with a assertion which results in a restart if this does happen.<br/><br/>files: inno_lic.cpp, pbx.cpp<br/><br/>products: all except phones<br/><br/>risks: Additional restarts could happen, but only in cases memory would be corrupt otherwise, so restart is the better choice
   
=== Trap if some but not all interfaces of a given type are unlicensed ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51771 51771]
|}
problem: If some but not all interfaces are unlicensed (e.g. IP6000 with 4 PRI interfaces is licensed for 2 PRI interfaces) a trap could happen any time after the Gateway config was updated.<br/><br/>solution: Access to license structure fixed<br/><br/>files: inno_lic.cpp, gk.cpp<br/><br/>products: all gateway products<br/><br/>risks: None
   
=== Basic authentication support in HTTP client ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49450 49450]
|}
Problem: Currently the HTTP client does not support basic authentication but basic authentication is needed to access boxes that have Kerberos configured.<br/><br/>Solution: Integrate basic authentication into HTTP client.<br/><br/>Files: httpclient_i.h, httpclient_i.cpp<br/><br/>Risk: small
   
=== Trap in SRTP socket ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51146 51146]
|}
Problem: Under special conditions SRTP sockets send events to serials that are already deleted.<br/><br/>Solution: Check if the destination does still exist before sending the event.<br/><br/>Files: srtp_cipher.cpp<br/><br/>Risk: Small risk of damaging SRTP encryption on IP6000/IP2000<br/><br/>
   
=== One way media after SRTP renegotiation on IP6000 ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51148 51148]
|}
Problem: On the IP6000 platform the SRTP ROC was not reset on media renegotiation.<br/><br/>Solution: Reset SRTP ROC when rtp_channel::set_media_config is called<br/><br/>Files: srtp_cipher.cpp<br/><br/>Risk: no risk known<br/><br/><br/><br/>
   
=== LDAP Searches for unsupported DNs disconnected all LDAP connections ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50934 50934]
|}
problem: LDAP Searches for unsupported Distinguished Names (DN) disconnected all LDAP connections<br/><br/>solution: Remove (meanwhile surplus) v7 code<br/><br/>files: ldapsrv.cpp<br/><br/>products: all PBX products<br/><br/>risks: None
   
=== RELAY: Remove config parameter "mask" from GUI ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=48127 48127]
|}
ENUM/SIP interfaces shall accept all call sources (no filtering).<br/>No-Reg-IFs shall use addr/mask as filter for call sources.<br/>(Remove old mask logic for outgoing calls in gk.cpp)
   
=== SIP: Remote number update after pick-up does not work ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51268 51268]
|}
Problem: PBX send UPDATE with changed From URI (rfc4916) too early (interfering with ongoing INVITE transaction). UPDATE is rejected by picking party.<br/><br/>Solution: Postpone UPDATE(from-change) until INVITE transaction is complete.<br/> <br/>Files: sip.cpp/h<br/><br/>Products affected: PBXs with SIP endpoints doing call pick-up<br/><br/>Risk: No risk.
   
=== IP-DECT OEM compatibility with old MWI configuration ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49518 49518]
|}
problem: The MWI configuration should be compatible with old configuration.<br/><br/>solution: Configuration added.<br/><br/>files: dectfty.h, dectfty.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP800 conference ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49800 49800]
|}
problem: Conference hardware initialization for channel ten does not work.<br/><br/>solution: Delay within initialization sequence inserted.<br/><br/>files: ipac_drv.cpp.<br/><br/>products affected: Devices with IPAC chip.<br/><br/>risk: No risk of collateral damage.
   
=== H323 channel null pointer trap ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49813 49813]
|}
problem: Trap caused by null pointer access.<br/><br/>solution: Null pointer check added.<br/><br/>files: h323_ch.cpp.<br/><br/>products affected: All devices with H323 protocol.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT OEM system name update ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49825 49825]
|}
problem: The OEM DECT needs update of the system name.<br/><br/>solution: Update added.<br/><br/>files: dectusers.cpp, dectlocalusers.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT unattended call transfer ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49829 49829]
|}
problem: It should not be possible to enter the unattended call transfer mode if the second call is in ring-back state.<br/><br/>solution: Condition added.<br/><br/>files: dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT old anonymous PPs ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50064 50064]
|}
problem: The old anonymous PPs saved in the system object in firmware version 6 should not longer be used.<br/><br/>solution: Anonymous PPs in the system object are automatically deleted.<br/><br/>files: dectusers.h, dectusers.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT Radio call statistics ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50736 50736]
|}
problem: Radio call statistics like call or handover counter are missed in the master radios overview GUI for DECT deployment.<br/><br/>solution: Radio call statistics added.<br/><br/>files: dectmaster.h, dectmaster.cpp, dectmaster_radios.xsl (OEM), dectradio.h, dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT Handset's product number and software version ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50738 50738]
|}
problem: The DECT handset's product number and software version are not shown in the user list in the DECT master.<br/><br/>solution: Information is shown if available.<br/><br/>files: dect_users_right.xsl (OEM).<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT memory leak ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50975 50975]
|}
problem: There are memory leaks with update event of uninitialized radio registrations.<br/><br/>solution: Cleanup added.<br/><br/>files: dectmaster.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT hanging calls ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51007 51007]
|}
problem: Sometime there are hanging calls in the radio.<br/><br/>solution: New timer added to check for hanging calls.<br/><br/>files: dectradio.h, dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT OEM module MSF trap ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51008 51008]
|}
problem: Traps occur after using of the MSF module.<br/><br/>solution: Pointer cleanup added.<br/><br/>files: dectmsf.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT OEM multi-cast module support ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51269 51269]
|}
problem: Some new functions are needed for the oem multi-cast module support.<br/><br/>solution: Function added.<br/><br/>files: signal.h, signal.cpp, dectusers_if.h, dectusers.h, dectusers.cpp, dectlocalusers.h, dectlocalusers.cpp, dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT OEM protocol display update ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51354 51354]
|}
problem: If a OEM protocol is used the display update wrongly inserts the last pre-dialed digit as post-dialed keypad info.<br/><br/>solution: Function fixed.<br/><br/>files: dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT wrong forward of internal information event ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51418 51418]
|}
problem: A internal information event is wrongly forwarded to the PBX.<br/><br/>solution: Forward of this event is avoided.<br/><br/>files: dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== PBX BC Conference member type restriction / call information ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51429 51429]
|}
problem: Some other PBX objects can not be called as conference members. Conference object call target is not shown correctly in the PBX call list. This information is also used as calling party number for the other conference member calls, useful for recording with the VM object and several conference objects.<br/><br/>solution: PBX object type restriction removed and remote endpoint information (cgpn) fixed.<br/><br/>files: pbx_bc_conf.cpp.<br/><br/>products affected: All devices with PBX.<br/><br/>risk: Minimal risk of collateral damage.
   
=== PBX BC conference object TAPI feature clear call ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51434 51434]
|}
problem: The TAPI connection of the broadcast conference object does not support clearing calls.<br/><br/>solution: Feature added.<br/><br/>files: pbx_bc_conf.h, pbx_bc_conf.cpp.<br/><br/>products affected: All devices with PBX.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT IP-Master in IP6000 device ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51509 51509]
|}
problem: For big DECT systems the IP-DECT IP-Master should be hosted in IP6000.<br/><br/>solution: IP-DECT module with IP-Master added to IP6000 firmware. Usable only with IP-DECT multi-cell license.<br/><br/>files: dectuser.cpp, config.h, ip6000.h, ip6000.cpp, ip6000.mak, left_menu.xml, trace.xsl, new: dect module files without dect radio files, dect_hdr.xml, dect_admin_hdr.xml, dect.xml, dect_admin.xml.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT trap during call release and information message ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51583 51583]
|}
problem: A trap occurs if the DECT handset sends a information message and the call is release by the PBX. Only the channel is released, but not yet the call.<br/><br/>solution: Null pointer check added.<br/><br/>files: dectmaster.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT configuration option 'Redirection with GK ID' ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51616 51616]
|}
problem: Configuration option needed to append the GK ID if the registration is redirected by the PBX.<br/><br/>solution: Configuration option added.<br/><br/>files: dectmaster.h, dectmaster.cpp, dectmaster.xsl.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP6000 LE newer kernel support ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51712 51712]
|}
problem: Newer Linux kernel included in Debian does not work.<br/><br/>solution: Support for linux kuser helper functions added.<br/><br/>files: startup_littleendian.S.<br/><br/>products affected: Only IP6000 little-endian firmware.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT logging release code ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51759 51759]
|}
problem: The release code is not correctly shown in logging events.<br/><br/>solution: Fixed.<br/><br/>files: dectmaster.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP72 announcement calls should be routed to headset if plugged ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49587 49587]
|}
problem: IP72 announcement calls should be routed to headset if plugged. currently announced calls are always received with handset. <br/><br/>solution: fixed in code, has to be explicitly enabled in phone's web-ui: "Administration/Phone/Preferences/Route Automatically Connected Inbound Calls to Headset (if enabled)"<br/><br/>files: phone/sig/phonesig.* phone/user/phone_pref.xsl<br/><br/>products: all telephones<br/><br/>risks: none<br/>
   
=== presence function key usage on phone traps with non-presence-available pbx ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50034 50034]
|}
problem: presence function key usage traps with non-presence-available pbx<br/><br/>solution: fixed in code (check)<br/><br/>files: phone/app/app_disp.cpp<br/><br/>products: all telephones<br/><br/>risks: none<br/>
   
=== Better norwegian translation for telephone text entries ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50941 50941]
|}
problem: Better norwegian translation for telephone text entries<br/><br/>solution: Changed translation file<br/><br/>files: phone/txt/phonetxt.base<br/><br/>products: All telephones<br/><br/>risks: none<br/><br/>
   
=== Ringing style upon incoming message is not configurable via web - ui ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50963 50963]
|}
problem: Ringing style upon incoming message is not configurable via web - ui <br/><br/>solution: fixed in xsl<br/><br/>files: reg_edit_general.xsl<br/><br/>products: all telephones<br/><br/>risks: none<br/><br/>
   
=== Ringing tone used for incoming message can not be reconfigured permanently ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50976 50976]
|}
problem: Ringing tone used for incoming message can not be reconfigured permanently. It switches back to default after ringing once without user interaction.<br/><br/>solution: fixed in code<br/><br/>files: phone/app/app_ctl.cpp<br/><br/>products: all telephones<br/><br/>risks: none<br/><br/><br/><br/>
   
=== IP72: beacon recv time now configurable through command line ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51452 51452]
|}
problem: beacon recv time now configurable through command line. This is required for a special Meru Networks interop. (config change WLAN0 /beacon-recv-time 10)<br/><br/>solution: fixed in code<br/><br/>files: ascom-drivers/WLAN_drv.cpp<br/><br/>products: IP72<br/><br/>risks: none<br/>
   
=== IP72: Upgrade WLAN subsystem to Ascom 1.7.10 ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51516 51516]
|}
problem: Upgrade WLAN subsystem to Ascom 1.7.10<br/>Ascom i75 v1.7.10 release.<br/>- Beacon reception time can be changed.<br/>- Scan interval can be changed.<br/>- Null data keep alive period can be changed.<br/>- Two different site filters can be chosen.<br/>- RSSI filter parameters is changed: 25% new value + 75% old value (previous releases use 10% + 90%).<br/>- Roaming threshold is changed to -67 dBm (from -70).<br/>- Authentication timeout changed to 100 ms (from 500 ms).<br/><br/>solution: upgraded shared code<br/><br/>files: WLAN/* ascom-drivers/WLAN_drv.*<br/><br/>products: IP72<br/><br/>risks: none known<br/>
   
=== IP72: ring though handset ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51624 51624]
|}
problem: IP72 feature: ring through handset if configured so and handset plugged<br/><br/>solution: fixed in code<br/><br/>files: box/omap/omap_dsp.* box/omap/omap_codec.cpp<br/><br/>products: IP72<br/><br/>risks: none<br/><br/>
   
=== IP72: function keys only available in idle mode ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51798 51798]
|}
problem: IP72: function keys only available in idle mode<br/><br/>solution: option /softkey-mode now defines whether a predefined function key overlays a softkey in idle mode, in active mode, or not at all <br/><br/>files: phone/forms/forms*<br/><br/>products: IP72<br/><br/>risks: none<br/><br/>
   
=== IP800: V8 Firmware upload not possible after V7 licenseses are returned to myinnovaphone  ===
{|
|Status
|<font><font color="red">Assigned</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49888 49888]
|}
problem:  Missing label to identify new license scheme with certificates.<br/><br/>solution: fixed in makefile<br/><br/>files: ip800.mak<br/><br/>products: ip800<br/><br/>risks: low risk
   
=== DTMF digits missing during DTMF generation  ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49588 49588]
|}
problem: Tones are not send out after channel init with a undefined coder <br/><br/>solution: fixed in code, ignore DSP status packets for timing calculation, DSP message trace function fixed<br/><br/>files: ac_dsp2.cpp Recordpck.h ac48xhi.c<br/><br/>products: ip6000/800/1200/1201/4001<br/>risks: low risk
   
=== IP302/IP305: PCM connected channels disconnect other channels media ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49879 49879]
|}
problem: disconnect is sent to wrong channel<br/><br/>solution: fixed in code<br/><br/>files: ac_dsp3.cpp <br/><br/>products: ip302 ip305 <br/><br/>risks: low risk
   
=== IP2x IP30x: unreliable V.34 modem  ===
{|
|Status
|<font><font color="red">Assigned</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49883 49883]
|}
problem: echo canceller needs to be off, DSP jitter buffer must be static, output volume must be reduced<br/><br/>solution: fixed in code. Use "disable echo canceller flag" to enable this features. Use http://addr/AC-DSP0/mod_cmd.xml?cmd=form&amp;xsl=dsp.xsl to tune the volume and disable modem-bypass.<br/><br/><br/>files: ac_dsp3.cpp ac_dsp.h <br/><br/>products: ip2x ip30x<br/><br/>risks: low risk
   
=== Manufacturer URL is needed in static HTML pages  ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50950 50950]
|}
problem: Manufacturer URL is needed in static HTML pages <br/><br/>solution: added %U option to servlet_vars.cpp<br/><br/>files: servlet_vars.cpp<br/>products: all<br/><br/>risks: low risk
   
=== HTTP client header access ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51715 51715]
|}
problem: access to received  httpclient headers needed in some applications,OEM Manufacturer  in httpclients user agent header needed<br/><br/>solution: added virtual function to access received http headers, user agent header uses OEM struct manufacturer as user agent string<br/>files: httpclient_i.cpp httpclient_i.h httpclient.h<br/>products: all<br/><br/>risks: low risk
   
=== DSP debug ===
{|
|Status
|<font><font color="red">Assigned</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52124 52124]
|}
problem: sporadic trap in ac-dsp, defect return address<br/><br/>solution: debug added to show packets sent to DSP. Enable on IP6000 with config+change+AC_DSP11+/dtrace  config+write and restart. Use not with SRTP, since CPU load with 60channel RTP is increased on the IP6000 from 66% to 77% <br/><br/>files: ac_48xhi.c<br/><br/>products: ip800 ip6000 ip1200 ip1201 ip4001<br/><br/>risks: low risk
   
=== IP72 DSP acoustic web page not storing changes upon "OK" ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49576 49576]
|}
problem: IP72 DSP acoustic web page not storing changes upon "OK"<br/><br/>solution: fixed in code<br/><br/>files: box/omap/omap_code.cpp<br/><br/>products: IP72<br/><br/>risks: none<br/><br/>
   
=== IP72: WLAN code upgrade ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49577 49577]
|}
problem: IP72: WLAN code upgrade to latst from Ascom (Meru fixes)<br/><br/>solution:  <br/><br/>files: ./WLAN/Supplicant/obj/libodSupp_O.a ./WLAN/esta_dk/obj/libestadrv.a ./WLAN/esta_dk/obj/firmware.o ./WLAN/esta_dk/inc/wspVer.h ./WLAN/esta_dk/inc/TI_IPC_Api.h ./WLAN/esta_dk/inc/paramOut.h ascom-drivers/WLAN_drv.cpp<br/><br/>products: IP72<br/><br/>risks: none<br/>
   
=== PPP IP header compression traps ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49221 49221]
|}
problem: PPP IP header compression traps because a word aligned buffer is addressed by a struct ip_hdr pointer and the GCC optimizer replaced a memcpy by inline long register assignments) <br/> <br/>solution: fix in code<br/> <br/>files: iphc.cpp, iphc.h<br/><br/>products: all<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== NTP Server must respond to SYNC clients even if the device has no correct time from an official server  ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49267 49267]
|}
problem: when the NTP server is used to syncronize devices (SYNC client) a correct time is not required but the server must respond. <br/><br/>solution: don't ask for correct time on a client request.<br/><br/>files: ntp.cpp<br/><br/>products: all<br/><br/>risks: None, responses with a time lower Y2K are ignored by the NTP client (but not by the SYNC client)<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== RAS registration over a PPTP connection fails - association of server-local addr to PPTP interface wrong ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49308 49308]
|}
problem: RAS registration via a PPTP interface failed because a wrong rasAddress was returned in GatekeeperConfirm. Instead of the servers defaut IP address the remote endpoint address was associated to an interface without a configured server-local address.<br/><br/>solution: fix in code<br/><br/>files: ipproc.cpp<br/><br/>products: all<br/><br/>riscs: none<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== headset mode must be kept when a knocking call is accepted via operator while a disconnected call is pending ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49796 49796]
|}
problem: a knocking call accepted via operator was routed to speaker instead to headset when the phone was in headset mode playing the busy tone for a call which was disconnected from remote.<br/><br/>solution: fix in code<br/><br/>files: app_ctl.cpp<br/><br/>products: all phones<br/><br/>riscs: none<br/>
''Status:''
checked in to 9.00,8.00,09-80500 
   
=== Wrong calling party info on CTI initiated calls from a phone to a Trunk Object with 'Set Calling=Diverting No' checked ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50309 50309]
|}
problem: When a CTI application (TAPI or other SOAP based application) initiates a call from a phone to a Trunk Object with 'Set Calling=Diverting No' checked the the called party receives a wrong calling party info.<br/><br/>solution: when a CT-INITIATE is received on a RC-CONNECT call the cdpn in the CT-SETUP facility sent with the newly created outbound call is set to the phones own number (i.e. identical to the SETUP cgpn). <br/><br/>files: phonesig.cpp<br/><br/>products: all phones<br/><br/>riscs: none<br/>
''Status:''
checked in to 8.00,9.00,09-80500
   
=== In some countries the ring tone timing patterns for internal/external calls need to be swapped to meet country defaults ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50328 50328]
|}
problem: the builtin ring tone timing patterns for internal/external calls which are applied to the builtin ring melodies don't meet the country specific preferences for example in switzerland. swapping the patterns may help.<br/><br/>solution: "config add RING /swap-i-x" to swap patterns<br/><br/>files: ring.cpp, phone_pref.xsl<br/><br/>products: all phones<br/><br/>riscs: none
''Status:''
checked in to 8.00,9.00,09-80500
   
=== INCA phones - monitoring a headset conversation via handset (headset-spy) did not work ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50673 50673]
|}
problem: the /headset-spy option was skipped because of a bug in the driver option handler<br/> <br/>solution: fix in code<br/> <br/>files: inca_dsp.cpp<br/><br/>products: all phones<br/><br/>risks: None<br/>
''Status:''
checked in to 9.00,8.00,09-80500
   
=== in  any phone recording mode the recorder gets number and/or h323id of the  currently connected remote party ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50827 50827]
|}
problem: without this infomation the identification of the remote party in an recorded call requires syncronisation with log files not directly available in the recorder.<br/> <br/>solution: a CT-COMPLETE with number/h323id of the remote party is sent to the recorder whenever the remote party changes because of a consultation call or a call transfer.<br/> <br/>files: appp_form.cpp, app_fkey.cpp, app_disp.cpp, app_ctl.cpp, app_ctl.h, app_call.cpp <br/><br/>products: all phones<br/><br/>risks: Minimal for recorders not able to deal with CT-COMPLETE info<br/>
''Status:''
checked in to 8.00,9.00,09-80500
   
=== Phone: access to PBX directories failed if the PBX System Name contained non ascii characters (&gt;= 128) ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50974 50974]
|}
problem: the LDAP API expects latin1 but the name was utf8 encoded<br/><br/>solution: convert name to latin1 before passing to API<br/><br/>files: phone_dir.cpp<br/><br/>products: all phones<br/><br/>risks: none<br/>
''Status:''
checked in to 8.00,9.00,09-80500
   
=== When upgrading a phone to V8 directories having been disabled in V7 may come up enabled in V8 ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51381 51381]
|}
problem: to save space in flash the default V8 directory configuration is not stored in xml-config. When a V7 config is merged to a default V8 config a default enable='1' may override an enable='0' from V7 (V7 does not write bools with a value '0' to xml config) <br/><br/>solution: fix wrong overrides by checking for V7 specific config patterns<br/><br/>files: phone_user.cpp<br/><br/>products: all phones<br/><br/>riscs: none<br/>
''Status:''
checked in to 8.00,9.00,09-80500
   
=== function keys defined in a config template could not be overloaded by an associated user object ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51506 51506]
|}
problem: a function key defined in a template could not be overridden by an associated user object, the key in the template did always win.  <br/><br/>solution: the changed function key must be kept in user object<br/><br/>files: phone_config.cpp<br/><br/>products: all PBX and phones<br/><br/>riscs: none<br/>
''Status:''
checked in to 8.00,9.00,09-80500
   
=== AD Replicator, Searches to Global Catalog Server weren't possible ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50129 50129]
|}
problem: Searches to Global Catalog Server weren't possible<br/><br/>solution: Fix configuration for LDAP port<br/><br/>files: ldaprep.cpp<br/><br/>products: all PBX-,Dect products<br/><br/>risks: None
   
=== Flashdir: Comparison for 'guid' could fail ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50965 50965]
|}
problem: Comparison for 'guid' could fail<br/><br/>solution: apply binary comparison (was case insensitive)<br/><br/>files: flashdir.cpp<br/><br/>products: all PBX products<br/><br/>risks: None<br/>
   
=== LDAP/Replicator-Status  "There is no replicator active" ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51733 51733]
|}
Problem: When no replicator is enabled the replicator status window is showing<br/>an empty drop-down list. It should be a message shown indicating that<br/>no replicator is enabled.<br/><br/>Solution: Display "There is no replicator active"<br/><br/>Files: ldaprep_status.xsl<br/><br/>Risk: none<br/>
   
=== Cleanup gateway interface config ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49181 49181]
|}
Problem: Config option 'mask' could not be used as filter for incoming calls.<br/><br/>Solution: Accept configured 'mask' and use it as filter (together with 'addr') for incoming calls on interfaces without registration.<br/><br/>Files: gk_if.h gk.h/cpp relay.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: Long forgotton feature "dial the remote ip address" not available anymore.
   
=== PBX Waiting Queue did not provide diverting party display name ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49786 49786]
|}
Problem: PBX Waiting Queue did not provide diverting party display name when forwarding/distributing calls.<br/><br/>Solution: Provide diverting party name.<br/><br/>Files: pbx_wait.cpp/h<br/><br/>Products affected: PBX<br/><br/>Risk: No risk.
   
=== GUI: Registration indicator not aligned ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50070 50070]
|}
Problem: The registration indicator (arrow) was not aligned on Gateway/GK page.<br/><br/>Solution: Make it aligned.<br/> <br/>Files: relay_ifs.xsl<br/><br/>Products affected: All gateways<br/><br/>Risk: No risk.
   
=== PBX: Presence subscription was rejected by object type 'Executive' ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50091 50091]
|}
Problem: Watching presence of an 'Executive' user was not possible. Subscription was rejected.<br/><br/>Solution: Accept presence subscription at 'Executive' user .<br/> <br/>Files: pbx.cpp<br/><br/>Products affected: All PBX devices<br/><br/>Risk: No risk.
   
=== Control calls without facility elements were forwarded on ISDN ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50199 50199]
|}
Problem: Control calls (calls without media channel) without facility elements were forwarded on ISDN. Seems to causes trouble on some ISDN switches<br/><br/>Solution: Reject control calls without facility elements with "Invalid information element contents".<br/> <br/>Files: relay.cpp<br/><br/>Products affected: All gateways<br/><br/>Risk: No risk.
   
=== Wrong presence status in PBX admin dialog ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50268 50268]
|}
Problem: Presence status 'open' is displayed when no presence status is available.<br/><br/>Solution: Fix presence dialog.<br/> <br/>Files: pbx_edit_presence.xsl<br/><br/>Products affected: All PBXs<br/><br/>Risk: No risk.
   
=== Phone: Fkey "Partner" should light up LED when partner's presence activity is "on-the-phone" ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50389 50389]
|}
Problem: Fkey "Partner" does not light up LED when partner's presence activity is "on-the-phone".<br/><br/>Solution: Light up LED on partner key when partner's presence activity is "on-the-phone".<br/> <br/>Files: app_disp.cpp<br/><br/>Products affected: Phones with partner keys only<br/><br/>Risk: No risk.
   
=== Gateway: Cannot use SIP interfaces without having "Media-Relay" and "Exclusive Coder" enabled ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50425 50425]
|}
Problem: Cannot use SIP interfaces without having "Media-Relay" and "Exclusive Coder" enabled. Installations with many SIP interfaces and heavy load will suffer from RTP traffic.<br/><br/>Solution: Do not enforce "Media-Relay" and "Exclusive Coder" in SIP interfaces.<br/><br/>Files: relay_edit_sip.xsl<br/><br/>Products affected: Gateways with SIP interface<br/><br/>Risk: No risk.
   
=== Make LCD dump to be displayed in browser ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51485 51485]
|}
Problem: LCD dump was displayed by external program.<br/><br/>Solution: Fix Content-Type of lcd_dump.bmp to make browsers display it.<br/> <br/>Files: http.cpp<br/><br/>Products affected: All phones<br/><br/>Risk: No risk.
   
=== ISDN: Sending of CEI facilities as Point to Multipoint endpoint did not work ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51744 51744]
|}
Problem: Call independent signaling did not work on Point to Multipoint interfaces. Required for Call Completion.<br/><br/>Solution: Fixed.<br/> <br/>Files: q931.cpp<br/><br/>Products affected: BRI Gateways<br/><br/>Risk: Small risk of collateral damage.
   
=== Phone: Local coder config was not used on outgoing phone calls ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49899 49899]
|}
Problem: Local coder config was not applied to outgoing phone calls, but is required when it comes to media re-negotiation.<br/><br/>Solution: Give local coder config to all kind of calls.<br/><br/>Files: phonesig.cpp/h<br/><br/>Products affected: All phones.<br/><br/>Risk: No risk.
   
=== Phone: Stop trying to subscribe for own presence ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50346 50346]
|}
Problem: On PBX's not supporting presence subscription (v7 or earlier) the phone endlessly tries to subscribe for own presence.<br/><br/>Solution: Stop trying to subscribe for own presence.<br/> <br/>Files: phonesig.cpp<br/><br/>Products affected: All SIP phones<br/><br/>Risk: No risk.
   
=== Phone: Fkey "Partner" should try to subscribe for Presence only if checkmark set ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50857 50857]
|}
Problem: Fkey "Partner" tries to subscribe for partner's presence. Even on PBXs not supporting Presence.<br/><br/>Solution: Added checkmark to Partner fkey config.<br/> <br/>Files: phone_config.h/cpp phone_edit.cpp app_fkey.cpp fkey_edit_partner.xsl <br/><br/>Products affected: Phones with partner keys only<br/><br/>Risk: No risk.
   
=== Phone: Fkey "Partner" show presence activity even if partners presence status is "closed" ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50952 50952]
|}
Problem: Fkey "Partner" does not show presence activity if partners presence status is "closed" (not registered).<br/><br/>Solution: Show presence activity regardless of the status.<br/> <br/>Files: app_disp.cpp<br/><br/>Products affected: Phones with partner keys only<br/><br/>Risk: No risk.
   
=== Phone: Presence subscription of partner fkey not created sometimes ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51519 51519]
|}
Problem: In some cases the presence subscription of the partner fkey was not established.<br/><br/>Solution: Fix lookup of existing presence subscription.<br/> <br/>Files: phonesig.cpp<br/><br/>Products affected: Phones with partner fkeys<br/><br/>Risk: No risk.
   
=== Phone: Trap when re-creating presence call ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51588 51588]
|}
Problem: Trap when re-creating presence call, because facility entity did not exist.<br/><br/>Solution: Re-create facility entity when re-creating call object.<br/> <br/>Files: phonesig.cpp<br/><br/>Products affected: All phones<br/><br/>Risk: No risk.
   
=== SIP: Handling of re-INVITE collision ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49135 49135]
|}
Problem: After re-INVITE collision at Mitel-PBX, every incoming re-try was rejected with 491 until outgoing re-try was successful.<br/><br/>Solution: Accept incoming re-try while having a postponed re-INVITE client transaction.<br/><br/>Files: sip.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk.
   
=== Memory Leak ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49164 49164]
|}
Problem: When closing a SIP interface a small buffer containing the proxy name was not freed.<br/><br/>Solution: Free proxy name buffer.<br/><br/>Files: sip.cpp<br/><br/>Products affected: SIP endpoints<br/><br/>Risk: No risk.
   
=== ENUM/SIP interfaces shall accept incoming calls ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49198 49198]
|}
Problem: Gateway interfaces of type ENUM/SIP did not accept incoming calls.<br/><br/>Solution: Make ENUM/SIP interfaces accept incoming calls.<br/><br/>Files: siptrans.cpp<br/><br/>Products affected: Gateway devices<br/><br/>Risk: No risk.
   
=== Trap when SIP closes unused transport connections ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49257 49257]
|}
Problem: Rare trap when SIP closes transport connections that failed to establish.<br/><br/>Solution: Fix cleanup of unused transport connections.<br/><br/>Files: siptrans.cpp<br/><br/>Products affected: SIP devices using SIP/TCP or SIP/TLS (not SIP/UDP)<br/><br/>Risk: No risk.
   
=== SIP: 180/Ringing was not re-transmitted ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49461 49461]
|}
Problem: If 180/Ringing got lost and the caller re-transmitted INVITE, re-transmission of 180/Ringing was missing.<br/><br/>Solution: Re-transmit last sent provisional response.<br/><br/>Files: siptrans.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk.
   
=== SIP: Incoming calls not accepted by PBX ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49473 49473]
|}
Problem: Incoming SIP calls are rejected with 407, if lookup of active registration fails due to display-name in Contact header of INVITE.<br/><br/>Solution: Skip display-name of Contact header when performing registration lookup for incoming call.<br/><br/>Files: siptrans.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: Low risk of collateral damage.
   
=== Trap when switching off SIP phone ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49556 49556]
|}
Problem: Switching off causes unregistration. It traps when receiving REGISTER response.<br/><br/>Solution: Wait for response before deleting interface.<br/><br/>Files: sip.cpp/h<br/><br/>Products affected: SIP devices<br/><br/>Risk: Small risk of collateral damage.
   
=== SIP: INVITE after REFER for blind transfer missed Referred-By header ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=49854 49854]
|}
Problem: After receiving REFER for blind transfer a new INVITE is sent without Referred-By header.<br/><br/>Solution: Save Referred-By header of received REFER on existing call and send it in INVITE for new call.<br/><br/>Files: sip.cpp/h siptrans.cpp/h<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk.
   
=== SIP: Incoming calls with anonymous From-URI were not tagged as CLIR ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50058 50058]
|}
Problem: Incoming SIP calls with anonymous From-URI were not tagged as CLIR.<br/><br/>Solution: Honour "anonymous" in From-URI and set Presentation Restricted flag in CGPN.<br/> <br/>Files: sip.cpp<br/><br/>Products affected: All SIP devices<br/><br/>Risk: No risk.
   
=== Gateway sends calls to wrong registered SIP endpoint ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50102 50102]
|}
Problem: If the addressed endpoint is currently not registered at the registrar interface at the gateway, calls are delivered to another registered SIP endpoint.<br/><br/>Solution: Reject calls if addressed endpoint is not registered.<br/> <br/>Files: siptrans.cpp<br/><br/>Products affected: All gateways<br/><br/>Risk: No risk.
   
=== Phone: Changes to option 'Proposed Registration Interval' were applied after reboot only ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50214 50214]
|}
Problem: Changes to option 'Proposed Registration Interval' had no effect until reboot. Demand for reboot was not indicated.<br/><br/>Solution: Apply configured registration interval at runtime. No reboot required.<br/> <br/>Files: phonesig.cpp<br/><br/>Products affected: All SIP phones<br/><br/>Risk: No risk.
   
=== SIP: Signaling not sent to non-standard port ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50394 50394]
|}
Problem: Even if non-standard remote port is configured, signaling is sent to 5060.<br/><br/>Solution: Apply configured remote port.<br/><br/>Files: sip.cpp<br/><br/>Products affected: SIP devices<br/><br/>Risk: No risk.
   
=== SIP: Problems parsing exotic SIP URIs ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=50421 50421]
|}
Problem: Failed to decode destination port from a redirect URI like this: <sip:2204;phone-context=cdp.udp@livio.nl:16618;maddr=10.2.10.3;transport=udp;x-nt-redirect=redirect-server><br/><br/>Solution: Fix URI parsing.<br/><br/>Files: sipmsg.cpp<br/><br/>Products affected: All SIP devices<br/><br/>Risk: No risk
   
=== SIP: NOTIFY(message-summary) not handled by PBX ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51443 51443]
|}
Problem: NOTIFY(message-summary) was not handled by PBX (server side). Only by phones (client side)<br/><br/>Solution: Implement handling of unsolicited NOTIFY(message-summary) at server side.<br/> <br/>Files: sip.cpp/h<br/><br/>Products affected: PBX with SIP clients<br/><br/>Risk: No risk.
   
=== SIP: Send Call-Info header with "answer-after=0" for auto answer signaling ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51554 51554]
|}
Problem: Snom phones (and others) do not support Answer-Mode header (RFC-5373). But they honour "anser-after" parameter in Call-Info header.<br/><br/>Solution: Send Call-Info header with "answer-after" header.<br/> <br/>Files: sipmsg.cpp/h siptrans.cpp<br/><br/>Products affected: All SIP PBXs<br/><br/>Risk: No risk.
=== Other new Features ===
{|
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=49678 49678]
|valign=top nowrap=true|sga
|Media relay  &amp;amp; Exclusive Haken bei SipTrunk
|}
   
== Bug Fixes ==
=== Other Bug Fixes ===
{|
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=50108 50108]
|valign=top nowrap=true|cmu
|Country settings in 'TELx/Physical' cannot select lines containing '+' character
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=50581 50581]
|valign=top nowrap=true|pme
|Presence on Partner Function Key
|}
   
= V8 Hotfix  3 =
Fixes included in Version 8 hotfix2
[http://mantis.innovaphone.com/view.php?id=51967 Definition]
== New Features ==
   
=== Option added to configure DTMF detection sensitivy ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52879 52879]
|}
problem: sporadic false DTMF detect<br/><br/>solution: Option added to configure DTMF detection sensitivy. Use <br/> config change AC-DSP0 /dtmf-threshold <val><br/> config write<br/> reset <br/>to change the sensitivity. <br/>0 selects -38dBm ( default), <br/>1 selects -28dBm, <br/>2 selects -33dBm,<br/>3 selects -43dBm, <br/>4 selects -48dBm<br/>During boot a non-default sensitivity is shown in the trace<br/><br/>files: ac_dsp2.cpp/h ac48xlo.c ac48xdef.h <br/><br/>products: ip800 ip6000<br/><br/>
   
=== PBX dtmf object selects wrong mobility user for feature codes ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51811 51811]
|}
Problem: e.g. calling cfu activate activates cfu on any user with a mobility fork and not just on the mobility user who is calling<br/><br/>Solution: use correct number to determine mobility user<br/><br/>Files: pbx_dtmf.cpp<br/><br/>Risk: no risk
   
=== PBX dtmf/icp object couldn't assign e164 without node/pbx if another object already has this e164 ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51812 51812]
|}
Problem: setting an e164 for features in an object without node/pbx didn't work if another object already had this number, but with configured node/pbx<br/><br/>Solution: use a new method for determining existing e164<br/><br/>Files: pbx_dtmf.cpp, pbx_icp.cpp, pbx.cpp, pbx.h, pbx_api.h<br/><br/>Risk: no risk
   
=== Ignore calls from gateway objects to dtmf object if no mobility user is found for incoming number ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51871 51871]
|}
Problem: If one would call the dtmf object over a gateway object and no mobility user is found for the caller, the feature codes would be applied to the gateway object.<br/><br/>Solution: Reject calls over gateway objects without mobility user for incoming number.<br/><br/>Files: pbx_dtmf.cpp<br/><br/>Risk: no risk
   
=== innovaphone endpoints which do not support group indications can turn off sending of group indications in PBX ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51799 51799]
|}
problem: High load can be generated by group indications on endpoints which do not support group indications (e.g. IP-DECT).<br/><br/>solution: These endpoints can turn off sending of group indications in the PBX<br/><br/>files: gk.cpp, pbx_api.h, pbx.cpp, pbx_gi.cpp, h323sig.cpp, h323ras.cpp, h323.h, voip.h, dectmaster.cpp<br/><br/>products: all<br/><br/>risks: Small risk of collateral damage
   
=== Potential trap when disconnecting call, WEBMEDIA-CH.5 default(82c09798): serial_event(814) ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51945 51945]
|}
problem: Under special timing conditions a trap could happen during call disconnect. This only happened if the call terminated at a physical interface on the given box.<br/><br/>solution: Cleaning up of media channel fixed<br/><br/>files: media.cpp, media.h, medialib.h<br/><br/>products: all<br/><br/>risks: Other problems with media negotiation
   
=== PBX: Filter needed for Gateway or Trunk objects ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51947 51947]
|}
problem: Filter configuration was removed from the user interface of Trunk and Gateway objects, but there are applications for which Filters are needed for these objects.<br/><br/>solution: Filter configuration added for Trunk and Gateway<br/><br/>files: pbx_edit_trunk.xsl, pbx_edit_gw.xsl<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX: Successive diversion activate/deactivate and dynamic group status sometimes failed ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52037 52037]
|}
problem: If a diversion activate/deactivate from an endpoint arrived before the last was written to flashdir, update was performed based on information in dram not information being written into flash<br/><br/>solution: Update information in dram before writing to flashdir<br/><br/>files: pbx.cpp, pbx.h, pbx_api.h, pbx_dtmf.cpp<br/><br/>products: all with PBX<br/><br/>risks: Collateral damage with diversion/dynamic group updates
   
=== H.323 RAS Registration thru NAT to PBX does not work with password ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52126 52126]
|}
problem: If registration with password is done, the client is sending a GatekeeperRequest as first message. Response to this message is sent to the (private) address contained in the message itself and not to source address<br/><br/>solution: Send response back to source<br/><br/>files: h323ras.cpp, h323.h<br/><br/>products: all<br/><br/>risks: Minimal
   
=== Gateway: Potential Trap with collision of transfer an call clearing ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52213 52213]
|}
problem: If a transfer is attempted to a call to the gateway at the same time this call is release an NULL pointer access could happen<br/><br/>solution: Check for this situation added<br/><br/>files: gk.cpp<br/><br/>products: all with gateway<br/><br/>risks: Nonen
   
=== Allow to limit license usage of slave PBX ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52238 52238]
|}
problem: In some configuration it is desireable that it can be ensured, that a slave PBX cannot use up too many licenses from the master. This is esspecially the case with dynamic slave PBXs managed by the customer in a hosted environment.<br/><br/>solution: Limits configurable by admin login to the Host box only<br/><br/>files: pbx.cpp, pbx.h, pbx_general.xsl, config_options.cpp, config_options.h<br/><br/>products: all with PBX<br/><br/>risks: Risk of collateral damage, no trivial fix.
   
=== innovaphone parameters were not sent with H.323 ras registration confirm, if the confirm was lost the first time ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52240 52240]
|}
problem: If a RasRegistrationRequest needed to be retransmitted, because the RegistrationConfirm was lost, the second RegistrationConfirm did not contain innovaphone parameters and the client did not detect it was connected to a innovaphone PBX/Gatekeeper.<br/><br/>solution: Send innovaphone parameters in this case also<br/><br/>files: h323.h, h323ras.cpp<br/><br/>products: all<br/><br/>risks: None
   
=== Potential hanging h323 signaling (Mem Leak) on collision of removing a signaling entity with outg. call ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52252 52252]
|}
problem: If a signaling entity is being removed (e.g. by configuration change) and at the same time an outgoing call is attempted at this interface, it could happen that the remove of the signaling interface failed.<br/><br/>solution: handle this collision<br/><br/>files: h323sig.cpp<br/><br/>products: all<br/><br/>risks: None
   
=== Avoid reboot when reading traces, if trap happens after firmware update ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52311 52311]
|}
problem: If a firmware update is done and before a regular restart a trap happens, the next reading of the trace buffer could generate another trap, because firmware dependent content is accessed in trace buffer.<br/><br/>solution: Avoid trap, by reading save info only from trace buffer in this case<br/><br/>files: debug.cpp, debug.h, arm.cpp, mips.cpp<br/><br/>products: all<br/><br/>risks: None
   
=== PBX: Potential Trap if changing groups ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52312 52312]
|}
problem: If group memberships are changed esspecially at Waiting Queues or Waiting Queue operators a trap could happen, because PBX internal information could get inconsistent.<br/><br/>solution: Fixed update of internal information<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: Other traps, complex operations, so it is possibly still wrong
   
=== PBX: Unknown Registrations did not display name _UNKNOWN_ on the phone anymore ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52417 52417]
|}
problem: By accident the name _UNKNOWN_ was removed for unknown registration<br/><br/>solution: Name _UNKNOWN_ added<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX SOAP FindUser did not work correctly with users not in root node ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52498 52498]
|}
problem: A library function adding prefixes to a number did not work correctly. This was used within the FindUser SOAP function of the PBX<br/><br/>solution: library function fixed<br/><br/>files: q931lib.cpp<br/><br/>products: all<br/><br/>risks: None
   
=== H.323 Signal IE when sent once during a call, was then sent with each subsequent message ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52517 52517]
|}
problem: A Signal IE sent with one message was repeated with all the messages. This could cause the a Signal IE indicating Ringback sent with Alert was repeated with Disc, so that no busy tone was played with Disc, but Ringback<br/><br/>solution: Send Signal IE once only<br/><br/>files: h323sig.cpp<br/><br/>products: all<br/><br/>risks: Minimal risk of collateral damage
   
=== Call Intrusion across PBXs did not work ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52556 52556]
|}
problem: If a call was to be intruded with the destination of the intrusion (which is one of the endpoints of the call to be intruded call) on a different PBX the intrusion failed in a strange way, because the intrusion facilities were not correctly forwarded between the PBXs<br/><br/>solution: Fix forwarding of intrusion facilities<br/><br/>files: pbx.cpp, pbx.h, pbx_api.h<br/><br/>products: all with PBX<br/><br/>risks: Small risk of collateral damage with intrusion
   
=== PBX Trunk automatic disconnect did not work if user was monitored by SOAP ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52574 52574]
|}
problem: If a user was monitored by SOAP a automatic hangup was not sent to the endpoint<br/><br/>solution: Send automatic hangup<br/><br/>files: pbx.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Potential trap if HTTP session is closed while command is still pending ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52576 52576]
|}
problem: The command processor was deleted in this case without waiting for result of the command<br/><br/>solution: Wait for result until deleting command processor<br/><br/>files: command.cpp, command.h<br/><br/>products: all<br/><br/>risks: Hanging command processors if check wrong
   
=== IP-DECT/Analog: CC was lost if initiating endpoint busy ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52595 52595]
|}
problem: If with an anlog phone connected to a IP24/28/... gateway or an IP-DECT phone initiated a call-completion but was busy itself at the time the call-completion could be executed, the call-completion was silently discarded<br/><br/>solution: delay call-completion until not busy<br/><br/>files: dtmffty.cpp, dtmffty.h<br/><br/>products: DECT and Analog gateways<br/><br/>risks: Minimal risk of collateral damage
   
=== Switch-PCM together with Media-Relay caused disconnect of call ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52614 52614]
|}
problem: If a call from one ISDN interface to another ISDN interface on the same box with Switch-PCM enabled (so that normaly the PCM Switch should be used), was routed thru a PBX with Media-Relay, the call was disconnected.<br/><br/>solution: In case of Media-Relay the PCM-Switch should not be used<br/><br/>files: h323ch.cpp<br/><br/>products: all<br/><br/>risks: None
   
=== Registration with Name or Number was only possible if Device with hw-id identical to name was configured ===
{|
|Status
|<font><font color="red">Assigned</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52634 52634]
|}
problem: In v8 devices were introduced into PBX configuration, which allow much better control of SOAP applications on which devices are used and also a mechanism to prohibt registration by Name or Number was built in. Even if this is useful in some cases, this mechanism was so obscur that it generated problems.<br/><br/>solution: Allow registrtation with name or number again independent of configured devices. If no device is configured with hw-id matching the name of the object, such a registration is associated to the first configured device.<br/><br/>files: pbx.cpp, pbx_admin.cpp<br/><br/>products: all with PBX<br/><br/>risks: In some installation the new feature may have been used already.
   
=== PBX Mobility: Unexpected restart if 3 or more mobility destinations configured at a user ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52782 52782]
|}
problem: The binary tree used to keep track of the mobility calls at a user got corrupted because of a typo in the Mobility object code. For some strange reasons this only happened with 3 ot more mobile destinations<br/><br/>solution: typo corrected<br/><br/>files: pbx_mobility.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX Mobility: No media if 3 or more forking/mobility destinations without delay configured ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52783 52783]
|}
problem: The media path was not switched correctly when calling mobile endpoints. More or less by accident it worked anyway for the first and the last forking destination<br/><br/>solution: media path switrching fixed<br/><br/>files: pbx_mobility.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== PBX Mobility: Trap if consultation call is cleared by remote side and user attempts to switch back to first call ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52860 52860]
|}
problem: If a consultation call is cleared by remote side an attempt to switch back to the first call (by sending R-Key pattern) leads to a trap<br/><br/>solution: Handle switch back to first call better<br/><br/>files: pbx_mobility.cpp<br/><br/>products: all with PBX<br/><br/>risks: None
   
=== Kerberos trap when turning off standby PBX with replication ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52415 52415]
|}
problem: The box traps when a standby PBX with LDAP replication is turned off. <br/><br/>solution: Fix event flow in kerberos_ldap_realm_tree.<br/><br/>products: all with PBX<br/><br/>files: kerberos_ldap.cpp, pbx.cpp<br/><br/>risk: no risk known
   
=== mem info for TLS socket ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52476 52476]
|}
description: Implement mem info for tls_socket objects for debugging purposes.<br/><br/>products: all<br/><br/>files: tls.h, tls.cpp<br/><br/>risk: no risk
   
=== Problems with TLS event handling ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52537 52537]
|}
problem: Two problems with the TLS state machine were found: <br/>A) SOCKET_SHUTDOWN from application is ignored if it is received between SOCKET_CONNECT from application and SOCKET_CONNECT_COMPLETE from TCP.<br/>b) When the TCP connection is closed during TLS handshake, TLS tries to send a SOCKET_RECV_RESULT(fin) to the application instead of SOCKET_SHUTDOWN.<br/><br/>solution: fix state machine<br/><br/>products: all<br/><br/>files: tls.cpp, tls.h<br/><br/>risk: risk of damaging applications using TLS
   
=== Control calls without facility elements were forwarded on ISDN ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52095 52095]
|}
Problem: Control calls (calls without media channel) without facility elements were forwarded on ISDN. Seems to causes trouble on some ISDN switches<br/><br/>Solution: Reject control calls without facility elements with cause "Invalid information element contents".<br/> <br/>Files: q931.cpp/h nt_tbl.tbl te_tbl.tbl<br/><br/>Products affected: All gateways<br/><br/>Risk: No risk.
''Status:''
Neuauflage von http://mantis.innovaphone.com/view.php?id=50199<br/><br/>Ich hatte für v8hf2 etwas in relay.cpp gemacht,<br/>damit keine Ctrl-Calls ohne Fty-Elemente ins ISDN geroutet werden.<br/>(Durch Presence-Subscriptions zu externen Teilnehmer passierte das<br/>und hatte eine Vermittlung nachhaltig verwirrt.)<br/><br/>Nun stellt sich heraus, dass das Problem sub-optimal gelöst wurde.<br/>Ich habe den eingegangegen Call gleich ganz released.<br/>Wenn man aber abgehende Calls immer erst über TONE schleift,<br/>dann schlägt mein Hack genau da gnadenlos zu,<br/>und CC-Requests kommen dann nie ins ISDN.<br/>:-(<br/><br/>Erste Idee war, statt zu rejecten, zu re-routen.<br/>Das verhält sich dann etwas besser, aber dann bin ich noch auf etwas gestoßen,<br/>was den ganzen Trick im Relay unmöglich macht:<br/><br/>Wenn an der Route zum ISDN nicht das Interworking-Flag gesetzt ist,<br/>dann reicht das RELAY sehr wohl eine Fty-Liste zum ISDN-Signaling.<br/>Fürs RELAY ist das also kein Ctrl-Call ohne Ftys!<br/>Aber das ISDN-Signaling schmeißt die H450-Ftys trotzdem weg<br/>und jagt den Ctrl-Call ohne Ftys raus.<br/><br/>Erkenntnis:<br/>Man muss sowas doch im Signaling abfangen.<br/>Q931 muss selbst erkennen, dass das kein Sinn mancht und den Ruf<br/>mit einem passenden Cause rejecten.<br/>Dann klappt auch das Re-Routing zum nächsten IF.<br/><br/>/Thomas
   
=== IP-DECT Master potential trap ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51983 51983]
|}
problem: There is a potential trap if the IP-DECT Master is used in the IP6000.<br/><br/>solution: Condition added.<br/><br/>files: dectmaster.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== H323 potential trap during signaling cleanup ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52030 52030]
|}
problem: A trap can occur if a call is still active in accept state and its signaling is cleaned-up.<br/><br/>solution: Call membership fixed.<br/><br/>files: h323sig.cpp.<br/><br/>products affected: All devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT OEM location recovery ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52146 52146]
|}
problem: No location cancel acknowledge response message is sent back if the endpoint is unknown. Needed in OEM system.<br/><br/>solution: Location cancel acknowledge response message added.<br/><br/>files: dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage. OEM devices only.
   
=== IP-DECT trap during debugging ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52157 52157]
|}
problem: Trap occurs if endpoints are listed for debugging in DECT radio.<br/><br/>solution: Pointer check added.<br/><br/>files: dectlocalusers.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT call counter ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52347 52347]
|}
problem: The call counter for maximum cpu load for SRTP should count radio calls and handover-ins together.<br/><br/>solution: Call counter changed. Handover-in calls aren't counted separately.<br/><br/>files: dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT call counter busy state ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52406 52406]
|}
problem: The last possible call from master is not accepted by DECT because the DECT is switched to busy state before sending this call setup.<br/><br/>solution: Sequence of signaling setup and busy message changed.<br/><br/>files: dectradio.h, dectradio.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT OEM protocol memory leaks ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52466 52466]
|}
problem: There are memory leaks if Skinny protocol is used.<br/><br/>solution: Cleanup fixed.<br/><br/>files: skinny.h, skinny.cpp, skinny_signaling.cpp, skinny_translation.cpp.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT IP6000  DECT module ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52486 52486]
|}
problem: Unused OEM DECT module should not be available in IP6000.<br/><br/>solution: Configuration changed.<br/><br/>files: config.h, changed OEM files, removed files.<br/><br/>products affected: All DECT devices.<br/><br/>risk: Minimal risk of collateral damage.
   
=== IP-DECT BMC trace off command ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52528 52528]
|}
problem: The BMC should be able to stop the trace for debugging.<br/><br/>solution: BMC message and handler added.<br/><br/>files: dect.h, dect.cpp.<br/><br/>products affected: All OEM DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== IP-DECT interface functions for OEM modules ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52920 52920]
|}
problem: New interface functions for OEM modules needed.<br/><br/>solution: Interface functions added.<br/><br/>files: dectusers_if.h, dectusers.h, decctmaster_if.h.<br/><br/>products affected: All DECT devices.<br/><br/>risk: No risk of collateral damage.
   
=== HTTP client head request waits for data ===
{|
|Status
|<font><font color="red">Assigned</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51978 51978]
|}
problem: HTTP client head request waits for data since a content_len is set in the HTTP header. That data is not sent during a head request<br/><br/>solution: ignore content-len header on a head request<br/><br/>files: httpclient_i.cpp <br/><br/>products: all<br/><br/>risks: low risk
   
=== DSP fix sporadic trap  ===
{|
|Status
|<font><font color="red">Assigned</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52247 52247]
|}
problem: sporadic trap in ac-dsp, defect return address<br/><br/>solution: fax buffer size increased, buffer check added, dsp receive packet relase done later <br/><br/>files: ac_fax2.cpp ac_dsp2.cpp<br/><br/>products: ip800 ip6000 ip1200 ip1201 ip4001<br/><br/>risks: low risk
   
=== DHCP client must check if an address provided by the server or a kept/reused address  is not already in use ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52076 52076]
|}
problem: some DHCP servers may deliver addresses which are already used by another device in the network. This may happen if the server does not check the addresses before delivery and either the server crashed and forgot previous assignments or there is a statically configured device with this address in the network<br/><br/>solution: if there is ARP reply for the provided address send a DHCPDECLINE to the server and restart discovery<br/><br/>files: dhcp.cpp, dhcp.h, arp_p.cpp<br/><br/>products: all<br/><br/>riscs: none
''Status:''
checked in to 8.00
   
=== socket bind/connect sometimes failed because of  duplicate assignment of local wildcard port ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52341 52341]
|}
problem: a local wildcard port could be assigned twice in case a socket using this port did exist over a period where all port numbers above and below this number had been assigned once.<br/><br/>solution: fix in code<br/><br/>files: tcp.cpp, tcp.h<br/><br/>products: all<br/><br/>riscs: none<br/>
''Status:''
checked in to 9.00,8.00
   
=== local call forwarding on busy for already alerting calls ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52541 52541]
|}
problem: local call forwarding on busy was supported only for calls rejected with cause busy before entering alerting state, i.e. when call waiting was disabled and the phone was busy with another call. there seems to be a need to forward already alerting calls too when the disconnect button is  pressed to get rid of the call. <br/><br/>solution: implement in code<br/><br/>files: phonesig.cpp<br/><br/>products: all phones<br/><br/>riscs: none, only used when local call forwarding is enabled
''Status:''
checked in to 9.00,8.00
   
=== phone: DHCP configuration of a non-automatic primary registration fails when the registration is created before DHCP completion ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52543 52543]
|}
problem: when DHCP completed after creation of a non-automatic primary registration some parameters provided in phonesig_if::create_phone_reg() were overriden (non-automatic primary registration: a primary registration not created automatically by phonesig.cpp with the parameters given on the "config change PHONE SIG ..." command line but by an application).  <br/><br/>solution: fix in code<br/><br/>files: phonesig.cpp<br/><br/>products: all phones<br/><br/>riscs: none<br/>
''Status:''
checked in to 9.00,8.00
   
=== phone: names containing non-ascii characters entered in the registration menu of secondary registrations are garbled ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52674 52674]
|}
problem: if any name containing non-ascii characters was entered in the registration menu of a secondary registration (Registration 2...6/Registration) the text was stored in wrong encoding. in this case it was not not possible to register via 'Name' or to access a gatekeeper via 'Gatekeeper Identifier'.<br/><br/>solution: fix in code<br/><br/>files: phonesig_if.cpp, phonesig_if.h, phone_edit.cpp, phonesig.cpp, phonesig.h, app_fkey.cpp<br/><br/>products: all phones<br/><br/>riscs: none<br/>
''Status:''
checked in to 9.00,8.00
   
=== phone: passwords containing non-ascii characters did not work for the primary registration ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52788 52788]
|}
problem: if a password containing non-ascii characters was entered in the registration menu of a primary registration (Registration 1) the password was stored in wrong encoding and thus did not match the password configured at PBX. <br/><br/>solution: fix in code<br/><br/>files: phonesig_if.cpp, phonesig_if.h, phone_edit.cpp, phonesig.cpp, phonesig.h, app_fkey.cpp<br/><br/>products: all phones<br/><br/>riscs: none<br/>
''Status:''
checked in to 9.00,8.00
   
=== directory entries displayed duplicate when using delayed input with slow LDAP-servers ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52877 52877]
|}
problem: with delayed keyboard input the number of queries sent to the LDAP server when typing a name is reduced. The first query is sent after the number of characters configured by 'delay-count' or the timeout configured by 'delay-ticks'. If another character was typed before the response arrived a new search was started but the previous search results were not cleared.<br/><br/>solution: fix in code<br/><br/>files: phone_dir_ui.cpp<br/><br/>products: all phones<br/><br/>riscs: none<br/>
''Status:''
checked in to 7.00,8.00,9.00
   
=== Trap of PBX when relasing webmedia call ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51938 51938]
|}
Problem: Trap when releasing a webmedia call (MOH, WQ announcement, Voicemail, etc).<br/><br/>Solution: Don't give events to channel object after CHANNEL_DISCONNECT.<br/> <br/>Files: dummysig.cpp<br/><br/>Products affected: All PBX devices<br/><br/>Risk: No risk.
   
=== ISDN: Call completion could not be activated at point-to-point interfaces ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51990 51990]
|}
Problem: Call completion could not be activated at point-to-point interfaces. ccbs_T_Request was badly encoded.<br/><br/>Solution: Fixed encoding ccbs_T_Request and added handling of ccbs_T_RequestResult.<br/><br/>Files: q932asn1.cpp relay.cpp q950.cpp/h fty.h<br/><br/>Products affected: BRI Gateways<br/><br/>Risk: No risk.
   
=== Phone: Mis-configuration may cause phone to try presence subscription for nobody ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51838 51838]
|}
Problem: Configuring a partner fkey without specifying partner's name or number causes the phone to subscribe for presence without name or number.<br/><br/>Solution: Never try to subscribe for presence without name or number.<br/> <br/>Files: phonesig.cpp<br/><br/>Products affected: All phones<br/><br/>Risk: No risk.
   
=== Phone: Presence fkey disappears and cannot be configured ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52036 52036]
|}
Problem: An already configured fkey "Presence" disappears and cannot be configured after uploading hotfix2.<br/><br/>Solution: Fixed presence fkey.<br/><br/>Files: phone_config.cpp phone_edit.cpp<br/><br/>Products affected: All phones<br/><br/>Risk: No risk.
   
=== SIP: Unsolicited NOTIFY(message-summary) not handled ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=51636 51636]
|}
Problem: Unsolicited NOTIFY(message-summary) not handled when received before having tried to subscribe for message-summary.<br/><br/>Solution: Keep last received message-summary and give it to app after subscription was rejected by SIP server.<br/> <br/>Files: sip.cpp/h<br/><br/>Products affected: All phones<br/><br/>Risk: No risk.
   
=== SIP: UPDATE with SDP with "sendrecv" wasn't handled ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52007 52007]
|}
Problem: UPDATE(sendrecv) wasn't handled after UPDATE(sendonly/inactive).<br/><br/>Solution: Fixed handling of UPDATE with SDP.<br/><br/>Files: sip.cpp<br/><br/>Products affected: All SIP devices<br/><br/>Risk: No risk.
   
=== SIP: SRTP key changes right after connect ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52159 52159]
|}
Problem: During call establishment with SRTP a re-INVITE is initiated right after connect providing a new SRTP key. It's unnecessary and some equpiment fail to handle change of SRTP key.<br/><br/>Solution: Avoid change of SRTP during call.<br/><br/>Files: sip.cpp/h<br/><br/>Products affected: SIP Gateways<br/><br/>Risk: No risk.
   
=== SIP: Anonymize remote-party info when sending dialog-info if remote-party calls with CLIR ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52171 52171]
|}
Problem: Calling party is seen in dialog-info even if CLIR was set.<br/><br/>Solution: Hide remote party in dialog-info if remote-party calls with CLIR.<br/><br/>Files: sipmsg.cpp<br/><br/>Products affected: PBX serving SIP endpoints<br/><br/>Risk: No risk.
   
=== SIP: Trap when using TCP as transport ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52209 52209]
|}
Problem: Trap when trying to cleanup idle/unused TCP connections.<br/><br/>Solution: Check connection state before initiating connection shutdown.<br/> <br/>Files: siptrans.cpp<br/><br/>Products affected: SIP devices doing SIP over TCP<br/><br/>Risk: No risk.
   
=== SIP Entity URI in "application/dialog-info+xml" and "application/pidf+xml" was wrong ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52246 52246]
|}
Problem: The SIP URI in the "entity" attribute was wrong in presence and dialog XML.<br/><br/>Solution: Fix SIP URI in the "entity" attribute.<br/> <br/>Files: sip.cpp/h sip_dialog_info.cpp/h<br/><br/>Products affected: PBXs serving SIP endpoints<br/><br/>Risk: No risk.
   
=== SIP: Bad REGISTER request was not rejected ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52249 52249]
|}
Problem: If an incoming REGISTER request does not contain userpart in To-URI, no response was sent to client.<br/><br/>Solution: Reject with "400 Bad Request".<br/> <br/>Files: sip.cpp sipmsg.h<br/><br/>Products affected: PBXs serving SIP endpoints<br/><br/>Risk: No risk.
   
=== SIP: Trap when performing call transfer on ARM based hardware ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52356 52356]
|}
Problem: Trap due to alignment error.<br/><br/>Solution: Fix alignment of data.<br/> <br/>Files: sip.cpp<br/><br/>Products affected: ARM based devices talking SIP<br/><br/>Risk: No risk.
   
=== Noise after transfering a waiting queue connection ===
{|
|Status
|<font><font color="orange">To-decide</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=52718 52718]
|}
Problem: Being connected to a waiting queue announcement; Transfering this call to another endpoint; Transfer destination will hear noise instead of waiting queue announcement (in case of code change only)<br/><br/>Solution: Re-start announcement in matching coder.<br/> <br/>Files: webmedia.cpp/h<br/><br/>Products affected: All PBXs<br/><br/>Risk: No risk.
   
== Bug Fixes ==
=== Other Bug Fixes ===
{|
|-
|valign=top nowrap=true|'''''[http://mantis.innovaphone.com/view.php?id=51994 51994]'''''
|valign=top nowrap=true|tac
|Bug in v8HF2 - Presence Tasten verschwinden/können nicht angelegt werden.
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=51618 51618]
|valign=top nowrap=true|afi
|pbx dtmf object without node/pbx can't add number
|}
   
= V8 Release =
This release adds all kind of classic PBX/TAPI Features
[http://mantis.innovaphone.com/view.php?id=15115 Definition]
== New Features ==
   
=== Multiple PBX on a single Gateway (PBX Hosting) ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=26462 26462]
|}
In addition to the statically started (start/stop with reboot) PBX0 there will be dynamic startable Slave PBXs<br/>- config for each PBX in a Flash VAR<br/>- seperate FLASHDIR View for each PBX<br/>- Method to Backup/Restore for a single PBX
   
=== Application Platform Beta ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=36005 36005]
|}
Beta Version of the application platform, which can be used for development purposes. Only selected Hardware will be supported.
   
=== PBX Mobility Object ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=38357 38357]
|}
- Mobility Object, which can be dialed from mobile phone to get PBX internal dialtone<br/>- Internal features can be invoked using DTMF<br/>- Call presented to SOAP/TAPI as initated from internal object<br/>- use call forking configuration to associate outgoing forked calls to mobility object, so that PBX internal features are available for calls to the mobile device as well<br/><br/>!!! This Feature handles only PBX Object: Software for Mobile Phones is handled separately in other Roadmap Feature!!!
   
=== PBX Call Forking ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=38358 38358]
|}
- Forking destinations configurable at a PBX user<br/>- Calls are sent to forking destinations in addition to the normal call<br/>- can be used for OCS integration<br/>- used for mobility integration
   
=== Single Sign On ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=36000 36000]
|}
Currently on all innovaphone boxes within a system the administration accounts are configured locally. So if the admin password shall be changed, it has to be changed on all boxes.<br/>Kerberos shall be used to do the authentication centrally.<br/>If possible an integration into Active Directory will be implemented, so that the Windows Domain account can be used to authenticate for administration.
   
=== Operator rework (v8 switchboard) ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=19363 19363]
|}
only a few new features but make it a little bit more like other operator software.<br/><br/>The complete feature set is still to be defined.
''Status:''
http://wiki.innovaphone.com/index.php?title=Reference8:Innovaphone.switchboard
   
=== SIP Presence Federation ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=39234 39234]
|}
This feature allows to provide to/obtain from external SIP systems presence information. This is an open standard implemented on other systems as well (e.g. OCS).<br/><br/>Also sipport will be added to obtain local presence information from another system. This way it will be possible to build appications which manage the presence information of the PBX users
   
=== Phone config stored on PBX ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=22337 22337]
|}
The user config (function keys, ring tones, ...) for the phones shall be stored on the PBX.<br/>There should be phone config objects, which contain standard configs. To a user a phone config can be assigned. Additional config stored at the user shall modify this standard config.<br/>A generic way has to be found how the XML phone config at a user shall be applied to the config from the phone config object without the knowledge of the XML content.
   
=== Presence ===
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=27130 27130]
|}
The PBX manages presence information from endpoints.<br/>Presence information is received and sent to endpoints with SIP or H.323/H.450
''Status:''
Documentation:<br/>http://wiki-intern.innovaphone.com/index.php?title=Development:Presence
=== Other new Features ===
{|
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=44735 44735]
|valign=top nowrap=true|cb
|V8 License: Prevent downgrade to V7 if a V8 license needs to be removed from a box
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=38782 38782]
|valign=top nowrap=true|dde
|PBX Objects: Merge (and eliminate) Quickdial Object into Directory Search Object
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=1247 1247]
|valign=top nowrap=true|gd
|Busy on ... Calls/Twin Phones for Executive
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=26463 26463]
|valign=top nowrap=true|gd
|PBX Hosting: Phones on private Network registered to PBX on public network
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=34874 34874]
|valign=top nowrap=true|gd
|Broadcast: Display original diverting Party as well
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=38147 38147]
|valign=top nowrap=true|gd
|PBX: Route internal calls to ... interface
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=40874 40874]
|valign=top nowrap=true|gd
|Tunneling of sdp thru H.323 to allow sip/video accross locations
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=42421 42421]
|valign=top nowrap=true|gd
|Voice Recording in medialib
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=43572 43572]
|valign=top nowrap=true|jfr
|Ethernet Redundancy with RSTP
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=44096 44096]
|valign=top nowrap=true|mst
|switchboard, italian localization
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=41652 41652]
|valign=top nowrap=true|tac
|Switch off Gateway CDRs completely
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=38471 38471]
|valign=top nowrap=true|tac
|Implementation of Microsoft call forking header in SIP for OCS dual-forking
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=43438 43438]
|valign=top nowrap=true|tac
|OCS Federation
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=44718 44718]
|valign=top nowrap=true|tac
|FR: repeat=integer URL für webmedia/WQ
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=10943 10943]
|valign=top nowrap=true|tsr
|Call-Completion interworking to ISDN (CCB, CCNR)
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=35814 35814]
|valign=top nowrap=true|vsi
|IP72: lcd light per default an
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=39188 39188]
|valign=top nowrap=true|vsi
|New v8 ringing calls display
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=39381 39381]
|valign=top nowrap=true|gd
|use H.323 hop_count to stop call loops
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=40288 40288]
|valign=top nowrap=true|mst
|Switchboard, Reverse-LDAP Lookup Support for Estos Metadir
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=40404 40404]
|valign=top nowrap=true|mst
|Switchboard, Localization
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=40406 40406]
|valign=top nowrap=true|mst
|Switchboard, Park, De-Park
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=40636 40636]
|valign=top nowrap=true|mst
|switchboard: Read/Write User Configuration
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=41109 41109]
|valign=top nowrap=true|mst
|Switchboard, Persist Window Size+Position, Some Column-Widths
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=41108 41108]
|valign=top nowrap=true|mst
|Switchboard, Forward-LDAP Lookup Support for Estos Metadir
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=4326 4326]
|valign=top nowrap=true|ckl
|First und Last Diverting party in leg2 Info
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=26584 26584]
|valign=top nowrap=true|ckl
|determination of large pbx dimensioning
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=42666 42666]
|valign=top nowrap=true|mst
|operator, freq automatic nightswitch
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=7304 7304]
|valign=top nowrap=true|tac
|rfc4235 notifications
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=7650 7650]
|valign=top nowrap=true|tac
|SIP AOC
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=46769 46769]
|valign=top nowrap=true|jfr
|display diverting party in addition to calling party on partner and pickup key
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=42959 42959]
|valign=top nowrap=true|mst
|switchboard, Maximize App' on Call-Connect. Call Info when minimized (a'la Outlook)
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=32784 32784]
|valign=top nowrap=true|teh
|bc conference object: message support
|}
   
== Bug Fixes ==
=== Other Bug Fixes ===
{|
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=46167 46167]
|valign=top nowrap=true|mst
|switchboard, XP Installation abbrechen, wenn .Net CLR &lt; 2.0.50727.1433
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=13468 13468]
|valign=top nowrap=true|vsi
|blind transfer und FTY_CT_SETUP info ergeben irreführende Anzeige beim Ziel
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=44177 44177]
|valign=top nowrap=true|vsi
|incoming calls from SIPGATE carry same public number in both alias/name/number
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=47401 47401]
|valign=top nowrap=true|
|Trap in RELAY on call completion interworking
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=42951 42951]
|valign=top nowrap=true|mst
|switchboard, multi-registration confusions
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=40375 40375]
|valign=top nowrap=true|tac
|SIP passwords were limited to 15 characters
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=40870 40870]
|valign=top nowrap=true|tac
|Media negotiation problem on SIP/SIP video calls
|-
|valign=top nowrap=true|[http://mantis.innovaphone.com/view.php?id=33570 33570]
|valign=top nowrap=true|tac
|ip72: wifi roaming and IP address changes thru dhcp after reassoc with new wifi network
|}

Revision as of 19:04, 1 June 2010

This is the Firmware V8 Roadmap Document.

Retrieved from "https://wiki.innovaphone.com/index.php?title=Reference8:Release_Notes_Firmware&oldid=17765"