Howto:IP62 WLAN WiFi Handset - innovaphone - H323 Testreport: Difference between revisions
Jump to navigation
Jump to search
Line 464: | Line 464: | ||
This section describes howto configure the innovaphone PBX and WLAN Phone IP62 by using WinPDM and the WLAN programming charger. | This section describes howto configure the innovaphone PBX and WLAN Phone IP62 by using WinPDM and the WLAN programming charger. | ||
To find out howto install the WinPDM software and the programming charger on a Windows PC, please take a look into the installation manual. | To find out howto install the WinPDM software and the programming charger on a Windows PC, please take a look into the [[Media:IP62-WLAN-Phone_install_winpdm.pdf | WinPDM installation manual]]. | ||
== Related Articles == | == Related Articles == | ||
<!--*[[Main_Page|wiki-innovaphone]]--> | <!--*[[Main_Page|wiki-innovaphone]]--> |
Revision as of 12:21, 10 September 2012
This product is being tested right now. The test is not yet completed.
Summary
Certification Status
Version
Firmware Version / Software:
* IP62 3.4.6 * WinPDM 3.9.4 (Win 7/Win XP)
Hardware Version:
* IP62 HW Type:902202, HW rev: G5, Production date:12w12 * innovaphone WLAN Desktop Programming Charger
innovaphone Firmware:
* V9 Hotfix 15
Device Setup
Tested feature | Result |
---|---|
Register Device w/o specific configuration (requires DHCP, GK detection and “magic” alias) | No, WinPDM is needed |
DHCP is default | Ok |
DHCP yields timeserver and time displays correctly | Takes Time from PBX if no fixed NTP-IP is configured |
SNTP config has TZ string for timezone/dst autoconfig | Yes. Different Time Zones are choosable |
DHCP yields correct default gateway | Yes |
Device supports magic registration (e.g. by serial) | No? |
GK discovery works | No. Numbers must configured in WinPDM and associate to devices. Generell settings as language, Network, GK-ID-IP cann deployed with templates, but device must fit in the (programmable)charger |
Fixed GK registrations works | Yes |
2nd GK is supported | Yes |
Changing registrations between GK1 and GK2 | Yes |
Registrations supports GK-ID | Yes |
Device registers w/o Extension (just by name) | No. Number is needed, too. Hardware-ID in User-Object must be the name |
Device registers by name with non-latin1 characters (e.g. UserÄÖÜ) | Yes |
Device registers by extension | Yes |
Device registers with H.235 password | Yes, but it's confusing in WinPDM. UserObject passwd can found in WinPDM in field gatekeeper passwd. |
Device registers multiple identities | No, not within the phone. It's possible to add identities in WinPDM and associate and change them to a phone (reboot after sync. required) |
Device sends NAT - keepalive messages | Yes |
PBX redirect (UserObject on Master/Phone at Slave registered) | Yes |
Physical Location (@PBX) correct? | Yes |
Device can configure IP address, GK attributes (gk-id, gk-ip, alias) from DHCP (vendor specific) | No. Only domain name. 1stGK, 2ndGK, GK-Identifier where still empty. Codec must be set fix with WinPdm. |
Device refreshes the PBX registration | Yes |
Device supports SRTP | No |
Device supports HTTPS | No |
Device supports VAD (Voice activity detection) | No |
Supported menu languages | 18 languages |
Test Results
Basic Call
Tested feature | Result |
---|---|
call using g711a | yes |
call using g711u | yes |
call using g729 | yes |
call using g722 | yes |
Overlapped sending | yes |
Early media channel | yes |
Device shows called id number | yes, if Name is not known or is not saved in contacts. Otherwise only name is displayed |
Device shows called id name | yes |
Device shows called id display info | Yes |
CGPN can be supressed | No |
Reverse Media Negotiaton | Yes |
Device shows CDPN/CGPN on incoming call | NO! Internal calls=ObjectName and for external calls -extern- is displayed. But number is saved in call list (if editing the call) |
Device shows CDPN/CGPN on outgoing call | NO! Internal calls=ObjectName and for external calls -extern- is displayed. But number is saved in call list (if editing the call) |
Device shows connected number | Yes, if Name is not available. But not name and number. |
Device shows diverting number | No number. Shows only -redirecting- if call from CFU comes in. If CFU on IP62 is conifgured target number is displayed |
Device supports distinctive ringing | Yes |
Device supports asymetric codec negotiation | n.a. |
Device supports codec renegotiation during a conversation | Yes |
Device shows correct display message in case of busy CDPN | Yes |
Device shows correct display message in case of not existing CDPN | Yes. -Invalid number- if number doesn't exist or -no response- if number exist but i.e. is not registered |
Device shows correct display message in case that the call is declined | Yes. Inclusive call back request. |
SOAP Call works? | Not perfect.. |
Device supports display updates during call(needed for Directory Search object) | Yes |
Long Time Call (>30 min) works? | yes. 45 min. tested. |
Registration redirecting works? | Yes |
Incoming SRTP call - SRTP not enabled on DUT | Yes |
Incoming SRTP call - SRTP enabled on DUT | Not possible to enable |
Voice Quality OK? | permanent background noise |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | yes |
DTMF tones received correctly | Yes (RFC 2833 RTP Event) |
Hold/Retrieve
Tested feature | Result |
---|---|
Device handles incoming hold correctly | Only if U-APSD is disabled MOH is hearable without cuts. #86366 |
Device can put a call on hold using correctly | Yes |
Transfer with consultation
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes | Yes, if U-APSD is disabled MOH is hearable without cuts. |
inno1 calls testphone. testphone transfers to inno2. | Yes | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes | Yes |
testphone calls inno1. testphone transfers to inno2. | Yes | Yes |
Transfer with consultation (alerting only)
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes | If U-APSD is disabled MOH and Ringback is hearable without cuts. |
inno1 calls testphone. testphone transfers to inno2. | No. Transfer with consultation must be connected to transfer. | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes | If U-APSD is disabled MOH and Ringback is hearable without cuts. |
testphone calls inno1. testphone transfers to inno2. | No. Transfer with consultation must be connected to transfer. | Yes |
Blind Transfer
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes |
inno1 calls testphone. testphone transfers to inno2. | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes |
testphone calls inno1. testphone transfers to inno2. | Yes |
Blind Transfer (alerting only/deflection)
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes |
inno1 calls testphone. testphone transfers to inno2. | No. Call must be established to transfer |
testphone calls inno1. inno1 transfers to inno2. | No ringback tone hearable on IP62 after inno1 blindtransfer to inno2 (#86202) |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
testphone makes call to a Broadcast Group. inno1 picks up. | Yes |
inno1 makes call to a Broadcast Group. testphone picks up. | Yes |
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. | Yes |
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. | Yes |
inno1 makes call to a Waiting Queue. testphone picks up. | Yes |
DTMF Features
Tested feature | Result |
---|---|
CFU Activate/Deactivate | Yes |
CFB Activate/Deactivate | Yes, but no icon/info for enabled CFB |
CFNR Activate/Deactivate | Yes, but no icon/info for enabled CFB |
Pickup Group | Yes, but no pickup-key and/or Display Info for incomming call |
Pickup Directed | Yes, but no pickup-key and/or Display Info for incomming call |
Park/Unpark | Yes |
Park To/Unpark From | Yes |
Call Completion Busy | Yes. But with *37*$# the call back number is not shown. Instead you see on IP62 Display "Extern". You can use instead the call-back function from IP62 (shows correct name) |
Call Completion Cancel | Yes |
Join Group/Leave Group | Yes |
Join All Groups/Leave All Groups | Yes |
Enable mobility/Disable mobility | Yes |
Enable mobility cw/Disable mobility cw | Yes |
Set presence | Yes. Our phones can see the presence state of IP62. But, IP62 can't see presence state of our phones. |
Other Features
Directory
Tested feature | Result |
---|---|
Device built-in directory exists | Yes |
Can be dialled from | Yes |
Does CLI resolution | Yes |
display update if directory object is used? | Yes |
Tested feature | Result |
---|---|
External LDAP Server supported | No |
Can be dialled from | No |
Does CLI resolution | No |
display update if directory object is used? | No |
Keys
Tested feature | Result |
---|---|
Device has speed dial keys | Yes |
Device has programmable function keys | Yes |
Device has partner keys | No |
Configuration
This section describes howto configure the innovaphone PBX and WLAN Phone IP62 by using WinPDM and the WLAN programming charger. To find out howto install the WinPDM software and the programming charger on a Windows PC, please take a look into the WinPDM installation manual.