V11 Gateway Firmware Technical Data EN: Difference between revisions
(New page: {{Template:Disclaimer}} ==Datasheet== ===innovaphone Firmware Version 11=== General features valid for innovaphone gateways operated with firmware V11 ===VoIP protocols=== {{Template:Lei...) |
(No difference)
|
Revision as of 16:49, 16 February 2016
innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 2023 innovaphone® AG
Datasheet
innovaphone Firmware Version 11
General features valid for innovaphone gateways operated with firmware V11
VoIP protocols
H.323 Version 5, including proprietary extensions
H.323 over UDP, TCP, TLS
SIP Version 2, conform RFC 3261
SIP over UDP, TCP, TLS
RTP, SRTP (SDES, DTLS), RTCP, ICE
T.38 Fax (supported rates 9.6k and 14.4k)
incl. fallback to G.711 (valid for gateways with DSPs)
Linux Application Platform
applicable for gateway models xx10 and xx11 (except of 1130) or as virtual solution
for additional Unified Communications applications such as faxserver, reporting and Microsoft(R) Exchange calendar connectivity
Requirements for operation in a virtual machine:
- VMWare Player/VMWare Workstation
- 1vCPU (at least 800 MHz - depending on the operation/load of other tasks)
- 512 MB RAM
- 8GB Disk (operation in IPxx10 requires a qualified CF-card, resp. in IPxx11/11xx a SSD)
Network
PPPoE, manual or automatic connection after boot
PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE
NAT, H.323-NAT, STUN
RSTP, EAP-TLS/EAP-MD5 acc. to IEEE 802.1X
VLAN-ID acc. to IEEE 802.1Q
DHCP support
LLDP support for VLAN configuration
NTP support
various SBC-functionalities
Administration
Password protected administration via web-browser, Kerberos server
Log and trace files, Display of interface and connection status, Ping – connection test for Internet Protocol, Sending SNMP V1 Traps
Save and reload config files, Boot code and firmware update via HTML upload, Automatic update via update server
Datenblatt
innovaphone Firmware Version 11
allgemeingültige Leistungsmerkmale für innovaphone Gateways mit Firmware V11
VoIP-Protokolle
H.323 Version 5, inklusive proprietärer Erweiterungen
H.323 über UDP, TCP, TLS
SIP Version 2, conform RFC 3261
SIP über UDP, TCP, TLS
RTP, SRTP (SDES, DTLS), RTCP, ICE
T.38 Fax (unterstützte Raten 9.6k und 14.4k) mit Rückfallmöglichkeit auf G.711
Linux Application Platform
gültig für Gateway Modelle xx10 und xx11 (ausser 1130) oder als virtuelle Lösung
für Zusatzapplikationen wie Reporting, Faxserver und Microsoft(R) Exchange-Kalenderanbindung
Anforderungen bei Betrieb in einer virtuellen Lösung:
- VMWare Player/VMWare Workstation
- 1vCPU (mind. 800 MHz - abhängig von weiteren Prozessen/Applikationen auf dem selben System)
- 512 MB RAM
- 8GB Disk (bei Betrieb in IPxx10 wird eine entsprechend große CF-Karte benötigt, in IPxx11/11xx eine SSD)
Netzwerk
PPPoE-Protokoll, manueller / automatischer Verbindungsaufbau nach Start
PPTP bis zu 32 Tunnel parallel, Verschlüsselung mit MPPE
NAT, H.323-NAT, STUN
RSTP, EAP-TLS/EAP-MD5 gem. IEEE 802.1x
VLAN-ID gem. IEEE 802.1q
DHCP Unterstützung
LLDP Unterstützung zur VLAN Konfiguration
NTP-Support
diverse SBC-Funktionalitäten
Administration
Passwortgeschützter Zugriff über Web-Browser, Kerberos-Server
Log- und Trace-Dateien, Statusanzeigen
Ping – Verbindungstest, Senden von SNMP-Traps V1
Speichern und Einlesen der Konfiguration, Aktualisierung Boot-Code und Firmware über HTML-Upload, Automatische Aktualisierung über Update-Server