Howto:2N - VoiceBlue Lite - Testreport
General Information
- Product name: Mobility Extension
- Vendor: 2N
- Version: 2.00n
- Firmware: 02.07.35b02
- innovaphone Firmware:
Current test state
This product is being tested right now. The test is not yet completed.
Configured Scenario
Description
Mobility Access Features
Calls received are redirected in accordance with rules and filters defined by the user.
User Web interface for handling redirections and profiles.
Mobile Extension
Access to PBX-like functions from any registered mobile phone: call hold, call resume, conference call, switching between calls, transfer, selection of redirection profiles.
DTMF Features available via DTMF ViceBlue Lite
Call Hold
Default DTMF code 7*.
Put on hold with *7, retrieve with 9#.
Transfer
Default DTMF Code <Number>#
- Call form mobile to GSM GW
- Dial 101#
- 100 accepts the call
- Dial 7*
- Dial 102#
- 102 accepts the call
- Hang up
- 101 and 102 are connected
Blind Transfer
Default DTMF Code #<Number>#
- Call form mobile to GSM GW
- Dial 101#
- 101 accepts the call
- Dial 7*
- Dial #102#
- 102 alerting
- Hang up manually (9# doesnt work)
Folow Me
Enable/disable calls on user object from PBX to GSM.
SMS at No Answer
Enable/disable SMS via GSM to the number of mobile phone.
Features available via PBX DTMF Features
Mobile Least Cost Routing
VCC
Voice Call Continuity (VCC) is a feature that permits a user to continue a call on an associated phone by simply dialing the VCC service access number. The ongoing call is continued without any interruption. In the test scenario, the GSM phone calls Ext.4 via the QuesCom Gateway, then Ext.2 dials 9, the call is continued on Ext.2 and released on the GSM.
Tested call flows
Inbound to normal user
Inbound to One number user
Mobility to normal user
VCC
Fax
Inbound to user fax number
Outbound fax
Important Components
Server Requirements
- Windows,Linux, etc.
- other software requirements
Product Setup
Installation & Configuration of the vendor Software
Installation & Configuration of the innovaphone components
Product Test
Minor Bugs
- Problem1