Reference13r1:Apps/PbxManager/Trunks
Jump to navigation
Jump to search
Configure your Trunklines
Add Trunk
Create a new Trunk object on the PBX
- Name
- The Long Name of the PBX object
- SIP
- The name of the PBX object
- Number
- The number of the object
- Loopback
- destination to be called if an incoming call is routed back to the trunk-number
- See Trunk specific configurations
- Incomplete
- destination to be called if an incoming call to an incomplete number is received
- See Trunk specific configurations
- Invalid
- destination to be called if an incoming call to an invalid number is received
- See Trunk specific configurations
- Busy
- destination to be called if an incoming call to a busy endpoint is received
- See Trunk specific configurations
- Rejected
- destination to be called if an incoming call is rejected by the called endpoint
- See Trunk specific configurations
- No answer
- destination to be called if an incoming call is not answered by the called endpoint
- See Trunk specific configurations
- Interfaces/SBC
- First create the Trunk and confirm with OK. Afterwards reopen the Trunk configuration and configure the connected Interface/SBC
Edit Trunk
- Interfaces/SBC
- (+ Add) to receive a selection of usable target gateways
- Select gateway to be used
- Select Interface for POTS-connection (FXO, BRI, PRI) or SBC Interface for SIP
- Interface (FXO, BRI, PRI)
- If available, usable interfaces are displayed for selection
- Select protocol
- Point to Point (PtP - mostly ISDN with a number block) - configure trunk data
- Point to Multipoint (PtMP - mostly ISDN with single numbers) - configure trunk data and internal number maps
- Manual - default PtMP is applied; further configuration manually via AdminUI
- SBC (SIP)
- Select country provider product is offered
- Select used SIP provider according to connection contract
Known issues
- defintion of protocol mode PtP (default PtmP) in PBXManager has no effect to the physical interface settings
- adjustment has to be done via AdvancedUI
- Line-bound SIP connections are not listed.
- More options for the trunk objekt you find in the Admin UI / PBX / Objects / trunk-object.