User contributions for Gd
Jump to navigation
Jump to search
26 January 2011
- 17:0117:01, 26 January 2011 diff hist empty Reference9:PBX/Dyn-PBXs New page: Administration of dynamic PBXs is done on this page. With the new button a new dynamic PBX can be created. For a new dynamic PBX an Id and a Name must be configured. The Id is a unique ide... current
- 17:0017:00, 26 January 2011 diff hist empty Reference9:PBX/Calls New page: In the '''Calls''' PBX overview page, all calls actively being made can be monitored. This is advantageous for diagnostic purposes in particular, since the existence of possible network pr...
- 16:5816:58, 26 January 2011 diff hist empty Reference9:Gateway/Routes New page: This page displays all the configured routes for phone calls. Routes may be changed added or deleted. The display of routes can be filtered so that only routes with a given From or To inte...
- 16:5816:58, 26 January 2011 diff hist empty Reference9:Gateway/Interfaces New page: The display of the gateway’s configurable '''interfaces''' is organised in columns: * '''Interface:''' The name of the interface. Clicking this name opens a popup page, on which all set...
- 16:5816:58, 26 January 2011 diff hist empty Reference9:Gateway/General New page: This page is used to configure general parameters for the gateway functionality. {| |valign="top" nowrap="true"|'''Gatekeeper ID''' |The Gatekeeper Identifier. This is used with VOIP inte...
- 16:5716:57, 26 January 2011 diff hist empty Reference9:Gateway/GK/GW New page: Below is an overview of all the gateway's configurable VoIP interfaces: * '''Interface:''' The name of the interface. Clicking this name opens a popup page, on which all settings can be ma...
- 16:5616:56, 26 January 2011 diff hist empty Reference9:Gateway/Calls New page: In the '''Calls''' gateway overview page, all calls actively being made can be monitored. This is advantageous for diagnostic purposes in particular, since the existence of possible networ... current
- 16:5616:56, 26 January 2011 diff hist empty Reference9:Gateway/CDR New page: The transmission of the so-called '''CDRs''' (Call Detail Records) is disabled as standard (Off). After selection of a CDR type, the transmission of detailed CDRs is enabled, as are the re...
- 16:5316:53, 26 January 2011 diff hist empty Reference9:Maintenance/Download/Directory New page: The Download directory tab only allows you to save the telephone directory of your IP telephone. You can upload the content using [[Reference:Administration/Upload/Directory|Upload Directo... current
- 16:5316:53, 26 January 2011 diff hist empty Reference9:Maintenance/Download/Config New page: This function allows to save the current configuration of the VoIP device. When clicking the Download link, a popup page opens, in which it can be specified whether to save the configurati...
- 16:5316:53, 26 January 2011 diff hist empty Reference9:Maintenance/Diagnostics/Tracing New page: Using the '''trace(buffer)''' link, the trace information of the VoIP device can be viewed and saved. In the process, a text file log.txt is generated, which displays the current trace in ...
- 16:5216:52, 26 January 2011 diff hist empty Reference9:Maintenance/Diagnostics/Traceroute New page: The Traceroute tool allows you to see how packets travel in the IP network.<br> It shows the path taken by packets between this device and any other given remote host (IP address).<br> You... current
- 16:5216:52, 26 January 2011 diff hist empty Reference9:Maintenance/Diagnostics/Ping New page: It is possible to execute a '''ping''' towards a particular destination host (IP address), since for test purposes it is often necessary to execute a ping command directly from the VoIP de... current
- 16:5116:51, 26 January 2011 diff hist empty Reference9:Maintenance/Diagnostics/Logging New page: Using the '''syslog''' link, the log messages of the device can be viewed directly in active operation. The messages are continuously automatically updated and are scrolled upwards, out of...
- 16:1616:16, 26 January 2011 diff hist empty Reference9:DECT/Calls/Radio New page: === Statistic === Some statistical informations about calls and handovers. === Call list === The currently active calls carried out via the DECT radios can be monitored. If no values or ... current
- 16:1416:14, 26 January 2011 diff hist empty Reference9:DECT/Config/Wireless New page: === Frequency Band === The frequency band for the current location. It can be set only in the DECT sync-master. WARNING: Setting the wrong band can be against concerned states law. === ... current
- 16:1316:13, 26 January 2011 diff hist empty Reference9:DECT/Calls/Handover New page: The currently active calls that go via several DECT base stations can be monitored. If no values or entries are transferred, the respective value is displayed with a dash (-). current
- 16:1216:12, 26 January 2011 diff hist empty Reference9:DECT/Calls/Master New page: === Statistic === Some statistical informations about calls, handovers and the maximum number of calls at the same time. === Call list === The currently active calls carried out via the D... current
- 15:4915:49, 26 January 2011 diff hist empty Reference9:Linux/General New page: The fundamental operating modes of Linux are configured on this page. The Linux OS can be startet on selected platforms as a secondary operating system that runs application specific tasks...
- 15:4615:46, 26 January 2011 diff hist empty Reference9:Interfaces/ETH/WLAN New page: == WLAN == {| |valign=top nowrap=true|'''SSID:''' | The SSID for the WLAN. |} == Security == {| |valign=top nowrap=true|'''Cipher:''' | The encryption type mode used by the WLAN. (Old W... current
- 15:4315:43, 26 January 2011 diff hist empty Reference9:Interfaces/FXS/Signaling New page: The call '''signalling''' settings of the analogue '''TEL''' interfaces can be adjusted here: {| |valign=top nowrap=true|'''Disable:''' | Disables the relevant analogue TEL interface. |- ...
- 15:4315:43, 26 January 2011 diff hist empty Reference9:Interfaces/FXS/Physical New page: Here, the '''physical''' settings for the analogue door intercom interface can be made: {| |valign=top nowrap=true|'''WT mode:''' | This check box should only be checked if compatibility ...
- 15:3015:30, 26 January 2011 diff hist empty Reference9:Event/0x00120001 New page: This alarm indicates that there is less then 200000 bytes of memory available for allocation current
- 15:2915:29, 26 January 2011 diff hist empty Reference9:Event/0x0011005b New page: '''IP: No route through interface (Interface down)''' The IP routing process failed to deliver a packet explicitely directed to a specific network interface. The network interface was ei... current
- 15:2915:29, 26 January 2011 diff hist empty Reference9:Event/0x00110053 New page: '''IP0: UDP bind error''' Local error.<br> UDP socket was trying to bind itself to a specific local port number.<br> The port number was found to be in use by some other socket. current
- 15:2915:29, 26 January 2011 diff hist empty Reference9:Event/0x00110049 New page: '''IP0: TCP bind error''' Local error.<br> TCP socket was trying to bind itself to a specific local port number.<br> The port number was found to be in use by some other socket. current
- 15:2915:29, 26 January 2011 diff hist empty Reference9:Event/0x000d0005 New page: '''Fax: General Error''' Indicates a problem in the T.30 or the T.38 protocol or a timing problem ( incompatible fax devices, end to end delay to high ). current
- 15:2815:28, 26 January 2011 diff hist empty Reference9:Event/0x000d0004 New page: '''Fax: Missing Page Confirmation''' Indicates one fax page was not acknowlegded. This can be happen if the fax modems get out of syncronisation, e.g. if slips on a ISDN interface occur d... current
- 15:2815:28, 26 January 2011 diff hist empty Reference9:Event/0x000d0003 New page: '''Fax: Loss of data More than 5 lost T.38 packets. Indicates a network problem. current
- 15:2815:28, 26 January 2011 diff hist empty Reference9:Event/0x000d0001 New page: '''Fax: Bad signal quality''' This event is generated if the fax modem in the gateway receives a distorted analog fax signal. The fax demodulator generates an eye pattern from the fax s...
- 15:2715:27, 26 January 2011 diff hist empty Reference9:Event/0x000c1001 New page: '''x509: A certificate has expired or will expire soon''' The device certificate or one of the trusted certificates has already expired or will expire during the next 30 days. After the c... current
- 15:2715:27, 26 January 2011 diff hist empty Reference9:Event/0x000c1000 New page: '''x509: Certificate validation is disabled until system time is set''' System time is not set but the current date is needed to validate if cryptographic certificates are valid. Therefor... current
- 15:2715:27, 26 January 2011 diff hist empty Reference9:Event/0x000c0407 New page: '''Kerberos: Cross-realm trust not configured''' The user tried to log-in with a user account from a Kerberos realm that does not trust or is not trusted by the realm of the device. '''... current
- 15:2615:26, 26 January 2011 diff hist empty Reference9:Event/0x000c0406 New page: '''Kerberos server down (timeout)''' The device did not get a response from the Kerberos server. Make sure that the Kerberos server is up and its address is well configured on the devices... current
- 15:2615:26, 26 January 2011 diff hist empty Reference9:Event/0x000c0403 New page: '''Kerberos: Host unknown to Kerberos server''' The host account of the device has been deleted on the Kerberos server. Join the Kerberos realm again. current
- 15:2615:26, 26 January 2011 diff hist empty Reference9:Event/0x000c0230 New page: '''TLS: Unknown CA''' A TLS connection could not be established because the remote party does not trust the CA of the certificate of this device. current
- 15:2615:26, 26 January 2011 diff hist empty Reference9:Event/0x000c0130 New page: '''TLS: Unknown CA''' A TLS connection could not be established because the CA of the remote certificate is not trusted. Check the rejected certificates for details. current
- 15:2515:25, 26 January 2011 diff hist empty Reference9:Event/0x000b0001 New page: '''CMD: Unexpected Restart''' The system was restarted because of watchdog, trap or by pressing the reset button. This event is generated 60s after the restart. current
- 15:2515:25, 26 January 2011 diff hist empty Reference9:Event/0x000a0001 New page: Signaling error reported by ISDN interfaces: A broadcast packet was received on a point-to-point interface, which should not happpen. This indicates that there is a configuration mismatch ... current
- 15:2515:25, 26 January 2011 diff hist empty Reference9:Event/0x00090006 New page: The card has a wrong disk format. The needed format is fat32. Be sure to format it, e.g. here: Reference:Administration/Diagnostics/CF. current
- 15:2415:24, 26 January 2011 diff hist empty Reference9:Event/0x00090005 New page: The card is unformatted or formatted with an unknown format. Be sure to format it with fat32, e.g. here: Reference:Administration/Diagnostics/CF. current
- 15:2415:24, 26 January 2011 diff hist empty Reference9:Event/0x00090004 New page: The card is full. You can buy a bigger one or delete some unnecessary files.
- 15:2415:24, 26 January 2011 diff hist empty Reference9:Event/0x00090003 New page: The underlying driver returned no data. This can be caused by an invalid cluster or if the card was removed while operations are performed on it. Be sure to run chkdsk [[Reference:Administ... current
- 15:2315:23, 26 January 2011 diff hist empty Reference9:Event/0x00090002 New page: The next cluster of a file or a directory is out of range. This error should not occur. Be sure to run chkdsk Reference:Administration/Diagnostics/CF. current
- 15:2315:23, 26 January 2011 diff hist empty Reference9:Event/0x00090001 New page: The cluster chain of a file or a directory is broken. This can be caused by removing the card without unmounting it before. Be sure to run chkdsk [[Reference:Administration/Diagnostics/CF]... current
- 15:2315:23, 26 January 2011 diff hist empty Reference9:Event/0x00070003 New page: The SIP protocol stack reached its build-in memory allocation limit. The total number message allocations is limited to be save against denial-of-service attacks. Under normal working cond... current
- 15:2315:23, 26 January 2011 diff hist empty Reference9:Event/0x00060004 New page: '''H323: Signaling Timeout''' A signaling timer expired. The reason for this could be a network problem or an interop problem.
- 15:2215:22, 26 January 2011 diff hist empty Reference9:Event/0x00060003 New page: '''H323: Signaling TCP failed''' The signaling transport connection could not be established.<br> This usually means, the destination (IP) is not reachable.<br> Check network connectivity... current
- 15:2215:22, 26 January 2011 diff hist empty Reference9:Event/0x00060001 New page: '''H323: Unexpected Message''' A message was received, which was not expected by the protocol in this state. This could be caused by network problems or by incompatible equipment. current
- 15:2215:22, 26 January 2011 diff hist empty Reference9:Event/0x00050002 New page: '''RTP: Excessive Loss of Data''' This event is generated if in a period of 10s more than approximatly 3% packet loss was detected. current