User contributions for Ckl
Jump to navigation
Jump to search
26 January 2011
- 14:5814:58, 26 January 2011 diff hist empty Reference9:Phone/User/Function-Keys/Call-Waiting New page: == Call Waiting == An incoming call for an already active line can be handled differently depending on the respective state. The state can be determined through the function key. * '''St...
- 14:5714:57, 26 January 2011 diff hist empty Reference9:Phone/User/Function-Keys/Call-Forwarding New page: == Call Forwarding == This function allows incoming calls to be diverted. Four states with different destinations can be configured (for example, mobile phone, voicemail), which are offer...
- 14:5714:57, 26 January 2011 diff hist empty Reference9:Phone/User/Function-Keys/Activate-Registration New page: == Active Registration == With this function, the defined registration is activated under “Registration identifier”. The currently active registration is set to inactive. If you have ...
- 14:5614:56, 26 January 2011 diff hist empty Reference9:Phone/User/Function-Keys New page: In general, there are two different types of function key, each of which can assume the “idle state” or “active state”: 1. Function keys that are assigned to the telephone's displ...
- 14:5514:55, 26 January 2011 diff hist empty Reference9:Interfaces/PRI/Statistics New page: {| |valign=top nowrap=true|'''State''' | Specification of the state (''up'', ''down''). |- |valign=top nowrap=true|'''Lost Signals''' | Number of lost signals. |- |valign=top nowrap=true|'... current
- 14:5414:54, 26 January 2011 diff hist empty Reference9:Interfaces/PRI/State New page: In the '''State''' submenu, you can display the state of the ISDN interfaces. The individual columns are explained in the following table. * '''Physical State:''' Displays the current sta... current
- 14:5414:54, 26 January 2011 diff hist empty Reference9:Interfaces/PRI/Protocol New page: In the '''Protocol''' submenu, you can set the protocol to be used for the ISDN interfaces. From the six available protocols, select the one that is best suited to your environment or if y...
- 14:5314:53, 26 January 2011 diff hist empty Reference9:Interfaces/PRI/Physical New page: The basic settings of the '''ISDN Primary Rate interfaces''' ('''PRI''') can be made here. The visibility of some settings depends on other settings. * '''NT Mode:''' The interface is op...
- 14:5314:53, 26 January 2011 diff hist empty Reference9:Interfaces/PRI/Interop New page: The '''Interop''' submenu normally does not have to be adjusted. This is only necessary if, for example, malfunctions occur when transmitting H.323 calls. Not all ISDN implementations are...
- 14:5314:53, 26 January 2011 diff hist empty Reference9:Services/LDAP/Srv-Status New page: The displayed '''server status''' data is automatically updated at intervals. {| |valign=top nowrap=true| |- |valign=top nowrap=true|'''connections:''' | Total number of all connections t...
- 14:5214:52, 26 January 2011 diff hist empty Reference9:Services/LDAP/Server New page: Here, access data can be configured that allows external '''LDAP''' clients read or read and write access to the LDAP database. VoIP-Telephones require read access to the LDAP database. T...
- 14:5214:52, 26 January 2011 diff hist empty Reference9:Services/LDAP/Rep-Status New page: The displayed '''replicator status''' data is automatically updated at intervals. In addition, the last ten activity messages of the replication are displayed: '''Server:''' IP-address an... current
- 14:5114:51, 26 January 2011 diff hist empty Reference9:Services/LDAP/Replicator New page: '''LDAP replication''' can be configured here. The task of LDAP replication is to copy and keep up to date the entire content or parts of the user database of a remote LDAP directory. The ...
- 14:4414:44, 26 January 2011 diff hist empty Reference9:Services/LDAP/Expert New page: This tool allows to investigate raw objects within the internal flash directory in all aspects. *Objects can be listed by just clicking on '''Show'''. *Objects can be searched for specif...
- 14:4114:41, 26 January 2011 diff hist empty Reference9:IP4/General/Settings New page: The basic IP settings are made here. == TOS == The TOS (Type of Service) byte inside the IP header is used for prioritization of packets inside the network. The device allows some packet...
- 14:4114:41, 26 January 2011 diff hist empty Reference9:IP4/General/Routing New page: The '''routing''' table of the current IP configuration of the device is displayed here. The table is used for fault analysis by the network administrator. The table is structured as follo... current
- 14:4014:40, 26 January 2011 diff hist empty Reference9:IP4/PPP/State New page: The state for all defined and enabled PPP interfaces is displayed here. In addition, it is possible to manually close the connection and set it up again. {| |valign=top nowrap=true|'''Int... current
- 14:4014:40, 26 January 2011 diff hist empty Reference9:IP4/PPP/Config/IF New page: An PPP interface can be configured here == PPP Interface == * '''Enable:''' Enables/disables the interface. The PPP interface is only displayed in the PPP State overview page if it is en...
- 14:4014:40, 26 January 2011 diff hist empty Reference9:IP4/PPP/Config New page: A list of all possible PPP interfaces with their respective Name (if configured) and the state (up/down/etc) is displayed here. The PPP interfaces may be PPP over ISDN, PPP over Ethernet (...
- 14:3914:39, 26 January 2011 diff hist empty Reference9:IP4/NAT/General New page: If the device is used as a router, it is able to connect IP terminals from the network with a non-public address to the public Internet. For this, '''NAT''' (Network Address Translation) i...
- 14:3914:39, 26 January 2011 diff hist empty Reference9:IP4/NAT/H.323 New page: '''H.323-NAT''' is an add-on for the general NAT function. This function enables H.323 calls between private and public networks. == Configuration == {| |valign=top nowrap=true|'''Enable ... current
- 14:3614:36, 26 January 2011 diff hist empty Reference9:Services/Update New page: On this page the device can be configured to poll an update server (a normal web server). A file pointed to by an URL is read from the update server and executed. This is an efficient mech...
- 14:3514:35, 26 January 2011 diff hist empty Reference9:Services/Telnet New page: Access via the '''Telnet''' protocol can be enabled here. {| |valign=top nowrap=true|'''Enable Telnet:''' | A checked check box enables access to the device using telnet. The device can b... current
- 14:3514:35, 26 January 2011 diff hist empty Reference9:Services/Sync New page: For certain call types (such as fax, modem or transparent data), it is important for both ends to keep time with each other. To make sure a number of gateways are always in sync, you may ... current
- 14:3414:34, 26 January 2011 diff hist empty Reference9:Services/SNMP New page: The VoIP device allows the operating state to be monitored using '''SNMP''' (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Manageme...
- 14:3414:34, 26 January 2011 diff hist empty Reference9:Services/NTP New page: The device can synchronize its internal date/time to an NTP server using the SNTP protocol. Without synchronization to an NTP server the internal date/time is reset to Januar 1st, 1970 0:0...
- 14:2614:26, 26 January 2011 diff hist empty Reference9:Services/Logging New page: == Logging == External '''logging''' is disabled by default (Off). You can still view log messages in real time (see Logging), but message...
25 January 2011
- 16:1516:15, 25 January 2011 diff hist empty Howto:How to implement large PBXs →Relevance for V7 and later
24 January 2011
- 19:2919:29, 24 January 2011 diff hist empty Howto talk:Bypass the setup wizard/install yes and no
21 January 2011
- 16:3416:34, 21 January 2011 diff hist empty Howto:Bypass the setup wizard/install →Resolution
- 16:2016:20, 21 January 2011 diff hist empty m Techserv Service Hours No edit summary current
- 16:0616:06, 21 January 2011 diff hist empty Techserv Service Hours New page: Techserv services (that is, 3rd Level Support (support@innovaphone.com) and Presales (presales@innovaphone.com)) can be reached via email. Issues will be looked at within 24 hours during n...
14 January 2011
- 22:1622:16, 14 January 2011 diff hist empty Reference8:TAPI Service Provider →Tweaks
- 13:5413:54, 14 January 2011 diff hist empty m Reference:ISDN Cause Codes No edit summary
- 12:5412:54, 14 January 2011 diff hist empty Support:Malicious Attack / Unauthorized Registration in V8 and V7 No edit summary
- 12:5412:54, 14 January 2011 diff hist empty Support:Malicious Attack / Unauthorized Registration in V8 and V7 No edit summary
- 12:4812:48, 14 January 2011 diff hist empty Support:Malicious Attack / Unauthorized Registration in V8 and V7 New page: ==Applies To== This information applies to * innovaphone PBX V8 (up to V8 HF9) * innovaphone PBX V7 (up to V7 HF22) Build 04-5817 and earlier. <!-- Keywords: enter keywords, foreign tr...
11 January 2011
15 December 2010
- 19:2419:24, 15 December 2010 diff hist empty m Howto:VoiceDirector Personal 20/35 - VoiceCom Solutions - Testreport No edit summary current
- 13:5513:55, 15 December 2010 diff hist empty m Reference:Call Detail Record CDR →How does a single CDR log entry look like?
- 13:5313:53, 15 December 2010 diff hist empty Howto:ISDN Cause Codes Howto:ISDN Cause Codes moved to Reference:ISDN Cause Codes current
- 13:5313:53, 15 December 2010 diff hist empty m Reference:ISDN Cause Codes Howto:ISDN Cause Codes moved to Reference:ISDN Cause Codes
- 13:4813:48, 15 December 2010 diff hist empty m Reference:Call Detail Record CDR No edit summary
- 08:5708:57, 15 December 2010 diff hist empty m Howto:What is RAB1? No edit summary current
- 08:5708:57, 15 December 2010 diff hist empty m Howto:What is RAB1? No edit summary
- 08:4508:45, 15 December 2010 diff hist empty Howto:What is RAB1? New page: ==Applies To== This information applies to * all innovaphone Devices <!-- Keywords: implizite Registrierungen, rp, rp1, rp2, rp3, rp4, rab1, rab2, rab3, rab4, rab5, rab6, rab7, rab8, ra...
10 December 2010
- 15:3515:35, 10 December 2010 diff hist empty Howto:Download BRIA New page: To download the BRIA softphone installer go to [http://download.innovaphone.com/ice/download/p/published/bria/ download.innovaphone.com/ice/download/p/published/bria]. [[Category:Faq|{{PA...
- 12:3812:38, 10 December 2010 diff hist empty m Reference8:Administration/PBX/Objects/Number Map No edit summary current
- 12:3712:37, 10 December 2010 diff hist empty Reference8:Administration/PBX/Objects/Number Map New page: This object maps the dialed number to a new one optionally depending on the registration address of the calling endpoint. Matching of the registration address only works if the calling end...