Howto:2N - VoiceBlue Lite - Testreport

From innovaphone wiki
Jump to navigation Jump to search

General Information

  • Product name: Mobility Extension
  • Vendor: 2N
  • Version: 2.00n
  • Firmware: 02.07.35b02
  • innovaphone Firmware:

Current test state

This product is being tested right now.  The test is not yet completed.


Configured Scenario

Description

Mobility Access Features

Calls received are redirected in accordance with rules and filters defined by the user.

User Web interface for handling redirections and profiles.

Mobile Extension

Access to PBX-like functions from any registered mobile phone: call hold, call resume, conference call, switching between calls, transfer, selection of redirection profiles.

DTMF Features available via DTMF ViceBlue Lite

Call Hold

Default DTMF code 7*.

Put on hold with *7, retrieve with 9#.

Transfer

Default DTMF Code <Number>#

  • Call form mobile to GSM GW
  • Dial 101#
  • 100 accepts the call
  • Dial 7*
  • Dial 102#
  • 102 accepts the call
  • Hang up
  • 101 and 102 are connected

Blind Transfer

Default DTMF Code #<Number>#

  • Call form mobile to GSM GW
  • Dial 101#
  • 101 accepts the call
  • Dial 7*
  • Dial #102#
  • 102 alerting
  • Hang up manually (9# doesnt work)

Folow Me

Enable/disable calls on user object from PBX to GSM.


SMS at No Answer

Enable/disable SMS via GSM to the number of mobile phone.

Features available via PBX DTMF Features

Enable/Disable CFs

Mobile Least Cost Routing

VCC

Voice Call Continuity (VCC) is a feature that permits a user to continue a call on an associated phone by simply dialing the VCC service access number. The ongoing call is continued without any interruption. In the test scenario, the GSM phone calls Ext.4 via the QuesCom Gateway, then Ext.2 dials 9, the call is continued on Ext.2 and released on the GSM.

Tested call flows

Inbound to normal user
Inbound to One number user
Mobility to normal user
VCC

Fax

Inbound to user fax number


Outbound fax

Important Components

Server Requirements

  • Windows,Linux, etc.
  • other software requirements

Product Setup

Installation & Configuration of the vendor Software

Installation & Configuration of the innovaphone components

Product Test

SIP Interop Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description.

Basic Call

calls between mobile phone via QuesCom and innovaphone phones (both directions).

Tested feature Result
call using g711a Yes
call using g711u Yes
call using g723 Yes
call using g729 Yes
Overlapped sending Yes
early media channel Yes
Fax using T.38 Yes
CGPN can be supressed Yes
Reverse Media Negotiaton Yes
Long time call possible(>30 min) Yes
Voice Quality OK? Yes

Direct Dial In

Tested feature Result
Inbound(QuesCom -> innovaphone) Yes
Outbound(innovaphone -> QuesCom) Yes

DTMF

DTMF via RFC2833 is supported and must be activated on the GSM GW. Tested from mobile phone via GSM GW to innovaphone pbx and vice versa.


Tested feature Result
DTMF tones sent correctly Yes
DTMF tones received correctly Yes

Hold/Retrieve

Tested between mobile phone via QuesCom and innovaphone phones. Tested in both directions.

Tested feature Result
Call can be put on hold Yes
Held end hears music on hold / announcement from PBX Yes
Held end hears music on hold Yes

Transfer with consultation

innovaphone phone transfers mobile call (via QuesCom ) and vice versa. Call returns works only when innovaphone phones transfers call (pbx feature).

Tested feature Result
Call can be transferred Yes
Held end hears music on hold Yes
Call returns to transferring device if the third

Endpoint is not available

Yes

Transfer with consultation (alerting only)

innovaphone phone transfers mobile call (via QuesCom ) and vice versa. Call returns works only when innovaphone phones transfers call (pbx feature).

Tested feature Result
Call can be transferred Yes
Held end hears music on hold or dialing tone Yes
Call returns to transferring device if the third

Endpoint is not available

Yes

Blind Transfer

Tested between mobile phone via QuesCom and innovaphone phones.

Tested feature Result
Call can be transferred Yes
Held end hears dialing tone Yes

Broadcast Group & Waiting Queue

Calls from mobile phone (via QuesCom) to innovaphone pbx.

Tested feature Result
Mobile phone can make a call to a Broadcast Group Yes
Mobile phone can make a call to a Waiting Queue Yes
Announcement if nobody picks up the call Yes

Minor Bugs

  • Problem1

Summary

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:2N_-_VoiceBlue_Lite_-_Testreport&oldid=13552"