Howto:2N - VoiceBlue Lite - Testreport

General Information

• Product name: Mobility Extension
• Vendor: 2N
• Version: 2.00n
• Firmware: 02.07.35b02
• innovaphone Firmware:

Current test state

This product is being tested right now.  The test is not yet completed. 

Configured Scenario

Mobility Access Features

Calls received are redirected in accordance with rules and filters defined by the user.

User Web interface for handling redirections and profiles.

Mobile Extension

Access to PBX-like functions from any registered mobile phone: call hold, call resume, conference call, switching between calls, transfer, selection of redirection profiles.

Mobile Least Cost Routing

VCC

Voice Call Continuity (VCC) is a feature that permits a user to continue a call on an associated phone by simply dialing the VCC service access number. The ongoing call is continued without any interruption. In the test scenario, the GSM phone calls Ext.4 via the QuesCom Gateway, then Ext.2 dials 9, the call is continued on Ext.2 and released on the GSM.

Tested call flows

Fax

Inbound to user fax number

Outbound fax

Important Components

Server Requirements

• Windows,Linux, etc.
• other software requirements

Product Test

SIP Interop Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description.

Basic Call

calls between mobile phone via GSM GW and innovaphone phones (both directions).

Tested feature	Result
call using g711a	Yes
call using g711u	Yes
call using g723	Yes
call using g729	Yes
Overlapped sending	Not supported
Early media channel	Yes, by using as outbound trunk
Fax using T.38	Not supported
CGPN can be supressed	Yes
Reverse Media Negotiaton	Yes
Long time call possible(>30 min)	Not tested, should work(no sessions expired timer)
Voice Quality OK?	Yes

Direct Dial In

Tested feature	Result
Inbound(GSM GW-> innovaphone)	Yes
Outbound(innovaphone -> GSM GW)	Yes

DTMF

DTMF via RFC2833 is supported and must be activated on the GSM GW. Tested from mobile phone via GSM GW to innovaphone pbx and vice versa.

Tested feature	Result
DTMF tones sent to GSM correctly	Yes
DTMF tones received from GSM correctly	Yes

Hold/Retrieve

Tested between mobile phone via GSM GW and innovaphone phones. Tested in both directions.

Tested feature	Result
Call can be put on hold	Yes
Held end hears music on hold / announcement from PBX	Yes
Held end hears music on hold	Yes

Transfer with consultation

innovaphone phone transfers mobile call (via GSM GW) and vice versa. Call returns works only when innovaphone phones transfers call (pbx feature).

Tested feature	Result
Call can be transferred	Yes
Held end hears music on hold	Yes
Call returns to transferring device if the third Endpoint is not available	Yes

Transfer with consultation (alerting only)

innovaphone phone transfers mobile call (via GSM GW) and vice versa. Call returns works only when innovaphone phones transfers call (pbx feature).

Tested feature	Result
Call can be transferred	Yes
Held end hears music on hold or dialing tone	Yes
Call returns to transferring device if the third Endpoint is not available	Yes

Blind Transfer

Tested between mobile phone via GSM GW and innovaphone phones in both directions.

Tested feature	Result
Call can be transferred	Yes
Held end hears dialing tone	Yes

Broadcast Group & Waiting Queue

Calls from mobile phone (via GSM GW) to innovaphone pbx.

Tested feature	Result
Mobile phone can make a call to a Broadcast Group	Yes
Mobile phone can get a call from a Broadcast Group	Yes
Mobile phone can make a call to a Waiting Queue	Yes
Mobile phone can get a call from a Waiting Queue	Yes
Announcement if nobody picks up the call	Yes

Mobility Features available via DTMF on ViceBlue Lite

Call Hold

Default DTMF code 7*.

Put on hold with *7, retrieve with 9#.

Transfer

Default DTMF Code <Number>#

• Call form mobile to GSM GW
• Dial 101#
• 100 accepts the call
• Dial 7*
• Dial 102#
• 102 accepts the call
• Hang up
• 101 and 102 are connected

Blind Transfer

Default DTMF Code #<Number>#

• Call form mobile to GSM GW
• Dial 101#
• 101 accepts the call
• Dial 7*
• Dial #102#
• 102 alerting
• Hang up manually (9# doesnt work)

Folow Me

Enable/disable calls on user object from PBX to GSM.

SMS at No Answer

Enable/disable SMS via GSM to the number of mobile phone.

Mobility Features available via PBX DTMF Features

A DTMF Digit # is used on the GSM GW to provide the end of dialing as default seting, but it also used on the PBX DTMF Feature Object.

Solution 1:

Change or disable "End of dialing" Digit to "+" and reduce the "Timeout for entering DTMF" on GSW GW.

Solution 2:

Change PBX DTMF Features to use * instead of #.

Enable/Disable CFs

OK

Pickup Group

OK

Minor Bugs

• Problem1