This product is being tested right now. The test is not yet completed.
Summary
Certification Status
Version
Firmware Version:
IP62 3.4.6
Hardware Version:
IP62 HW Type:902202, HW rev: G5, Production date:12w12
innovaphone Firmware:
V9 Hotfix 15
Device Setup
Tested feature
|
Result
|
Register Device w/o specific configuration (requires DHCP, GK detection and “magic” alias)
|
No, WinPDM is needed
|
DHCP is default
|
Ok
|
DHCP yields timeserver and time displays correctly
|
Takes Time from PBX if no fixed NTP-IP is configured
|
SNTP config has TZ string for timezone/dst autoconfig
|
Yes. Different Time Zones are choosable
|
DHCP yields correct default gateway
|
Yes
|
Device supports magic registration (e.g. by serial)
|
No?
|
GK discovery works
|
No. Numbers must configured in WinPDM and associate to devices. Generell settings as language, Network, GK-ID-IP cann deployed with templates, but device must fit in the (programmable)charger
|
Fixed GK registrations works
|
Yes, with IP
|
2nd GK is supported
|
Yes
|
Changing registrations between GK1 and GK2
|
Yes
|
Registrations supports GK-ID
|
Yes and No. You can set GK-ID but need the IP, too.
|
Device registers w/o Extension (just by name)
|
No. Number is needed, too. Hardware-ID in User-Object must be the name
|
Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|
Yes
|
Device registers by extension
|
Yes
|
Device registers with H.235 password
|
Yes, but it's confusing in WinPDM. UserObject passwd can found in WinPDM in field gatekeeper passwd.
|
Device registers multiple identities
|
No, not within the phone. It's possible to add identities in WinPDM and associate and change them to a phone (reboot after sync. required)
|
Device sends NAT - keepalive messages
|
Yes
|
PBX redirect (UserObject on Master/Phone at Slave registered)
|
Yes
|
Physical Location (@PBX) correct?
|
Yes
|
Device can configure IP address, GK attributes (gk-id, gk-ip, alias) from DHCP (vendor specific)
|
No. Only domain name. 1stGK, 2ndGK, GK-Identifier where still empty. Codec must be set fix with WinPdm.
|
Device refreshes the PBX registration
|
Yes
|
Device supports SRTP
|
No
|
Device supports HTTPS
|
No
|
Device supports VAD (Voice activity detection)
|
No
|
Supported menu languages
|
18 languages
|
Test Results
Basic Call
Tested feature
|
Result
|
call using g711a
|
yes
|
call using g711u
|
yes
|
call using g729
|
yes
|
call using g722
|
yes
|
Overlapped sending
|
yes
|
Early media channel
|
yes
|
Device shows called id number
|
yes, if Name is not known or is not saved in contacts. Otherwise only name is displayed
|
Device shows called id name
|
yes
|
Device shows called id display info
|
Display Name is shown for less then 0,3 sec., then Name is shown (not Long Name)
|
CGPN can be supressed
|
No
|
Reverse Media Negotiaton
|
|
Device shows CDPN/CGPN on incoming call
|
NO! Internal calls=ObjectName and for external calls -extern- is displayed. But number is saved in call list (if editing the call)
|
Device shows CDPN/CGPN on outgoing call
|
NO! Internal calls=ObjectName and for external calls -extern- is displayed. But number is saved in call list (if editing the call)
|
Device shows connected number
|
No
|
Device shows diverting number
|
No number. Shows only -redirecting- if call from CFU comes in. If CFU on IP62 is conifgured target number is displayed
|
Device supports distinctive ringing
|
Yes
|
Device supports asymetric codec negotiation
|
n.a.
|
Device supports codec renegotiation during a conversation
|
Yes
|
Device shows correct display message in case of busy CDPN
|
Yes
|
Device shows correct display message in case of not existing CDPN
|
Yes. -Invalid number- if number doesn't exist or -no response- if number exist but i.e. is not registered
|
Device shows correct display message in case that the call is declined
|
Yes. Inclusive call back request.
|
SOAP Call works?
|
|
Device supports display updates during call(needed for Directory Search object)
|
Yes
|
Long Time Call (>30 min) works?
|
yes. 45 min. tested.
|
Registration redirecting works?
|
Yes
|
Incoming SRTP call - SRTP not enabled on DUT
|
Yes
|
Incoming SRTP call - SRTP enabled on DUT
|
Not possible to enable
|
Voice Quality OK?
|
permanent background noise
|
DTMF
Tested feature
|
Result
|
DTMF tones sent correctly
|
yes
|
DTMF tones received correctly
|
Yes (RFC 2833 RTP Event)
|
Hold/Retrieve
Tested feature
|
Result
|
Device handles incoming hold correctly
|
Only if U-APSD is disabled MOH is hearable without cuts. #86366
|
Device can put a call on hold using correctly
|
Yes
|
Transfer with consultation
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes, if U-APSD is disabled MOH is hearable without cuts.
|
inno1 calls testphone. testphone transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
Yes
|
Yes
|
Transfer with consultation (alerting only)
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
If U-APSD is disabled MOH and Ringback is hearable without cuts.
|
inno1 calls testphone. testphone transfers to inno2.
|
No. Transfer with consultation must be connected to transfer.
|
Yes
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
If U-APSD is disabled MOH and Ringback is hearable without cuts.
|
testphone calls inno1. testphone transfers to inno2.
|
No. Transfer with consultation must be connected to transfer.
|
Yes
|
Blind Transfer
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
Yes
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
Yes
|
Blind Transfer (alerting only)
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
No. Call must be established to transfer
|
testphone calls inno1. inno1 transfers to inno2.
|
No ringback tone hearable on IP62 after inno1 blindtransfer to inno2 (#86202)
|
Broadcast Group & Waiting Queue
Tested feature
|
Result
|
testphone makes call to a Broadcast Group. inno1 picks up.
|
Yes
|
inno1 makes call to a Broadcast Group. testphone picks up.
|
Yes
|
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
Yes
|
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
Yes
|
inno1 makes call to a Waiting Queue. testphone picks up.
|
Yes
|
DTMF Features
Tested feature
|
Result
|
CFU Activate/Deactivate
|
Yes
|
CFB Activate/Deactivate
|
Yes, but no icon/info for enabled CFB
|
CFNR Activate/Deactivate
|
Yes, but no icon/info for enabled CFB
|
Pickup Group
|
Yes, but no pickup-key and/or Display Info for incomming call
|
Pickup Directed
|
Yes, but no pickup-key and/or Display Info for incomming call
|
Park/Unpark
|
Yes
|
Park To/Unpark From
|
Yes
|
Call Completion Busy
|
Yes. But with *37*$# the call back number is not shown. Instead you see on IP62 Display "Extern". You can use instead the call-back function from IP62 (shows correct name)
|
Call Completion Cancel
|
Yes
|
Join Group/Leave Group
|
Yes
|
Join All Groups/Leave All Groups
|
Yes
|
Enable mobility/Disable mobility
|
Yes
|
Enable mobility cw/Disable mobility cw
|
Yes
|
Set presence
|
Yes. Our phones can see the presence state of IP62. But, IP62 can't see presence state of our phones.
|
Other Features
Directory
Tested feature
|
Result
|
Device built-in directory exists
|
Yes
|
Can be dialled from
|
Yes
|
Does CLI resolution
|
Yes
|
display update if directory object is used?
|
Yes
|
Tested feature
|
Result
|
External LDAP Server supported
|
No
|
Can be dialled from
|
No
|
Does CLI resolution
|
No
|
display update if directory object is used?
|
No
|
Keys
Tested feature
|
Result
|
Device has speed dial keys
|
Yes
|
Device has programmable function keys
|
Yes
|
Device has partner keys
|
No
|
Configuration
innovaphone configuration
3rd party product configuration
Related Articles