Howto:Know if the ISDN line is point to point or point to multipoint
Applies To
This information applies to
- IP 6000
- IP 3000
- IP 800
- IP 400
- IP 305
- IP 302
- IP 202
all Builds
More Information
Assuming that a call is comming from the Isdn to the innovaphone Gateway , then you can find out if it´s an Point to Point (Ptp) or Point to Multipoint (PtMp) connection.
example trace:
PtP, Incomming call
22:1844:747:2 - ISAC.2 -> LAPD.2 : PH-RECV-RESULT data(46),ISAC 02 01 30 ae 08 01 01 05 04 03 80 90 a3 18 01 89 ..0............. 6c 0c 21 83 33 30 39 32 32 35 38 35 34 32 70 0a l.!.3092258542p. c1 38 39 30 34 34 39 38 37 33 7d 02 91 81 .890449873}...
exapmple trace:
PtMp, Incomming Call
15:0526:685:6 - IPAC-TE.0 -> LAPD.0 : PH-RECV-RESULT data(45),IPAC-TE 02 ff 03 08 01 01 05 a1 04 03 80 90 a3 18 01 89 ................ 6c 0c 21 83 33 30 38 39 30 34 34 39 38 30 70 09 l.!.3089044980p. c1 39 32 32 35 38 35 34 32 7d 02 91 81 .92258542}...
The procedure:
Activate the Traceflag Diagnostics/Tracing/Interfaces/TELx or BRIx or PPP
so that Layer-2 informations get traced -
empty trace
1) Make an incomming call
2)Look for the Isdn Setup Message - ths is teh Format:
- 4 Byte: Layer-2 Information - Der Wert '08': Protocol Discriminator=Q.931 Protocol for Layer-3 Call Control. - Der Wert '01': Length of Call Reference Value - 1 Byte: Call Reference Value - 1 Byte '05': Message Type=SETUP
3) Gemäss 2) weiss man nun, dass es sich um eine ISDN SETUP Nachricht handelt. Nun kann man sich die 4 Byte der Layer-2 Information anschauen. Dort speziell das zweite Byte, in dem die TEI angegeben ist.
Wichtig ist, dass die TEI nur die oberen 7 Bits belegt. Das untere achte Bit ist i.a. auf '1' gesetzt. - 02 01: Hier ist die Tei=0 - 02 ff: Hier ist die Tei=127
4) Nun muss nur noch unterschieden werden.
- Bei Tei=0 wird ein einziger, fixer Terminal Endpunkt adressiert. Es handelt es sich um einen PtP- oder Anlagenanschluss Anschluss. - Bei Tei=127 werden alle Terminal Endpunkte adressiert (Gruppenadressierung). Es handelt sich um einen PtMp- oder Mehrgeräteanschluss.