Howto:How to change language settings on IP110/IP150/IP200/IP230?
Jump to navigation
Jump to search
This article describes how to change phone menu language of innovaphone phones from default German to English or another language.
Applies To
This information applies to
- IP 110, V6
- IP 150, V6
- IP 200, V6
- IP 230, V6
More Information
There are many ways to set language on IP110/IP200/IP230 phone:
- manually (via web interface)
- manually (phone menu)
- via DHCP-Server (running on innovaphone Gateway)
- via DHCP-Server (running on Microsoft Server)
Manual Configuration (via web interface)
Point your web browser to phones web interface (e.g. http://192.168.0.1). Go to "Configuration" -> "Registration 1" -> "Preferences" and set "Language" dropdown box to you preferred language.
Since default language is German:
- Press "Menu"-Button
- Go to menu item "Nutzerliste" or "Nutzer"
- Press "->"-Button 3 times, till you see "Sprache: Deutsch"
- Set preferred language with "->"-Button
- Then press "Menu"-Button 2 times
- Select "Ja" and press "->"-Button
Configuration using DHCP vendor Options (using the innovaphone DHCP server Gateway)
Go to "Configuration" -> "ETH0" -> "DHCP-Server" and type eng into "Language"-Field.
Configuration using DHCP vendor Options DHCP-Server (using a Microsoft DHCP Server)
See related article for more information: http://145.253.157.2/inno-kb/Article.aspx?id=10632
However the best way is to deploy and configure the phones via DHCP-Server running on innovaphone Gateway.