Howto:2N Helios IP - 2N - SIP Testreport
Jump to navigation
Jump to search
Version
Firmware Version:
0.0.62
Hardware Version:
530v2
Certification Status
Device Setup
Tested feature | Result |
---|---|
Register Device w/o specific configuration (requires DHCP) | |
DHCP is default | yes |
DHCP yields timeserver and time displays correctly | |
SNTP config has TZ string for timezone/dst autoconfig | |
DHCP yields correct default gateway | |
Device supports magic registration (e.g. by serial) | |
Fixed registrations works | |
Device registers w/o Extension (just by name) | |
Device registers by extension | |
Device registers with password | |
Device registers multiple identities | |
Device supports STUN protocol | |
Device sends NAT - keepalive messages | |
Device refreshes the PBX registration | |
Device supports SIP over TCP | |
Device supports SIPS (SIP over TLS) | |
Device supports HTTPS | |
Device supports VAD (Voice activity detection) |
Test Results
Basic Call
Tested feature | Result |
---|---|
call using g711a | |
call using g711u | |
call using g729 | |
Overlapped sending | |
Early media channel | |
Device shows called id number | |
Device shows called id name | |
Device shows called id display info | |
Fax using T.38 | |
CGPN can be supressed | |
Reverse Media Negotiaton | |
Device shows CDPN/CGPN on incoming call | |
Device shows CDPN/CGPN on outgoing call | |
Device shows connected number | |
Device shows diverting number | |
Device supports distinctive ringing | |
Device supports asymetric codec negotiation | |
Device supports codec renegotiation during a conversation | |
Device shows correct display message in case of busy CDPN | |
Device shows correct display message in case of not existing CDPN | |
Device shows correct display message in case that the call is declined | |
Voice Quality OK? |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | |
DTMF tones received correctly |
Hold/Retrieve
Tested feature | Result |
---|---|
Device handles incoming hold (inactive) correctly | |
Device handles incoming hold (sendonly) correctly | |
Device can put a call on hold using correctly(inactive or sendonly) |
Transfer with consultation
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | ||
inno1 calls inno2. inno1 transfers to testphone. | ||
inno1 calls testphone. inno1 transfers to inno2. | ||
inno1 calls testphone. testphone transfers to inno2. | ||
testphone calls inno1. inno1 transfers to inno2. | ||
testphone calls inno1. testphone transfers to inno2. |
Transfer with consultation (alerting only)
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | ||
inno1 calls inno2. inno1 transfers to testphone. | ||
inno1 calls testphone. inno1 transfers to inno2. | ||
inno1 calls testphone. testphone transfers to inno2. | ||
testphone calls inno1. inno1 transfers to inno2. | ||
testphone calls inno1. testphone transfers to inno2. |
Blind Transfer
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | |
inno1 calls inno2. inno1 transfers to testphone. | |
inno1 calls testphone. inno1 transfers to inno2. | |
inno1 calls testphone. testphone transfers to inno2. | |
testphone calls inno1. inno1 transfers to inno2. | |
testphone calls inno1. testphone transfers to inno2. |
Blind Transfer (alerting only)
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | |
inno1 calls inno2. inno1 transfers to testphone. | |
inno1 calls testphone. inno1 transfers to inno2. | |
inno1 calls testphone. testphone transfers to inno2. | |
testphone calls inno1. inno1 transfers to inno2. | |
testphone calls inno1. testphone transfers to inno2. |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
testphone makes call to a Broadcast Group. inno1 picks up. | |
inno1 makes call to a Broadcast Group. testphone picks up. | |
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. | |
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. | |
inno1 makes call to a Waiting Queue. testphone picks up. |
Other Features
Directory
Tested feature | Result |
---|---|
Device built-in directory | |
Exists | |
Can be dialled from | |
Does CLI resolution |
Hands free
Tested feature | Result |
---|---|
Loudspeaker operation works fine | |
Hands free works fine | |
Volume adjustable during call |
Keys
Tested feature | Result |
---|---|
Device has speed dial keys | |
Device has programmable function keys |