Howto:Firmware Upgrade V10 V11r1: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 25: | Line 25: | ||
*Receive direction changes by -4.5dB in comparsion to V10 and earlier. | *Receive direction changes by -4.5dB in comparsion to V10 and earlier. | ||
*Transmit directrion changes by +6.0dB in comparsion to V10 and earlier. | *Transmit directrion changes by +6.0dB in comparsion to V10 and earlier. | ||
Hint : See [[Reference11:Interfaces/FXS/Physical]] if you are unsure which direction is supposed to be receive or transmit. | |||
== Linux Application Platform and its applications == | == Linux Application Platform and its applications == |
Revision as of 17:40, 5 November 2014
Applies To
This information applies to:
- All PBX devices
- All DECT devices
- Linux Application Platform
Configuration Changes
SRTP default now
In V11, SRTP is turned on by default. You only need to change the configuration if you do not want SRTP to be used.
FXS Gateways change initial port gain calibration
In V11, the FXS gateways ip22, ip24 and ip28 change their initial gain level calibration. The calibration changes vary from the gateway type as follows :
ip22, ip24
- Receive direction changes by -1.5dB in comparsion to V10 and earlier.
- Transmit direction changes by +4.0dB in comparsion to V10 and earlier.
ip28
- Receive direction changes by -4.5dB in comparsion to V10 and earlier.
- Transmit directrion changes by +6.0dB in comparsion to V10 and earlier.
Hint : See Reference11:Interfaces/FXS/Physical if you are unsure which direction is supposed to be receive or transmit.
Linux Application Platform and its applications
V11 will be compatible with Linux Application Platform V10. There will be no separate V11 release for the Linux Application Platform!
Known Problems
Related Articles
- Howto:Guideline V5 to V6 upgrade
- Howto:Upgrade Issues V5 to V6
- Howto:Firmware Upgrade V6 V7
- Howto:Firmware Upgrade V7 V8
- Howto:Firmware Upgrade V8 V9
- Howto:Firmware Upgrade V9 V10