Howto:How to change language settings on IP110/IP150/IP200/IP230?

From innovaphone wiki
Revision as of 18:01, 19 April 2007 by Afi (talk | contribs) (New page: ==Summary== This article describes how to change phone menu language of innovaphone phones from default German to English or another language. ==Applies To== This information applies to ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Summary

This article describes how to change phone menu language of innovaphone phones from default German to English or another language.

Applies To

This information applies to

  • IP 110, V6
  • IP 150, V6
  • IP 200, V6
  • IP 230, V6


Configuration

There are many ways to set language on IP110/IP200/IP230 phone:

  • manually (via web interface)
  • manually (phone menu)
  • via DHCP-Server (running on innovaphone Gateway)
  • via DHCP-Server (running on Microsoft Server)


Manually (via web interface)

Point your web browser to phones web interface (e.g. http://192.168.0.1). Go to "Configuration" -> "Registration 1" -> "Preferences" and set "Language" dropdown box to you preferred language.


Manually (phone menu)

Since default language is German:

  1. Press "Menu"-Button
  2. Go to menu item "Nutzerliste" or "Nutzer"
  3. Press "->"-Button 3 times, till you see "Sprache: Deutsch"
  4. Set preferred language with "->"-Button
  5. Then press "Menu"-Button 2 times
  6. Select "Ja" and press "->"-Button


DHCP-Server (running on innovaphone Gateway)

Go to "Configuration" -> "ETH0" -> "DHCP-Server" and type eng into "Language"-Field.


DHCP-Server (running on Microsoft Server)

  • FIXME

See related article for more information: http://www.innovaphone.com/inno-kb/Article.aspx?id=10632


However the best way is to deploy and configure the phones via DHCP-Server running on innovaphone Gateway.