Howto:NL - MOTTO - VaMo Configuration

NL Motto VaMo configuration.

This configuration if for registering a Motto Sim card to the PBX using a Innovaphone Session Border Controller.

PBX configuration:

Create a new user object. Description: Motto VaMo Long Name: Name of the user Display Name: Name of the user Name: (international format of the mobile number example: 31612345678) Number: (extension number for this user)

Password: (password for the SIP registration) Hardware Id: (international format of the mobile number example: 31612345678) PBX password: On

Session Border Controller object setup:

On he SBC create a net Session Border object for the SIM:

Long Name: Name of the user Password: (password for the SIP registration) Media Relay: On

Gatekeeper Id: ID of the PBX Primary Adr: IP of the PBX Name: (international format of the mobile number example: 31612345678) PBX Password: On

Name: (extension number for this user) PBX Password: Off TLS Only: Off Press OK

Set Sip config on the PBX and SBC:

Set this option using Maintenance, Diagnostics, Command. !config add SIP /take-source-addr-as-contact-addr /x-ice-disabled !config write !config activate reboot the PBX and SBC to be sure these options have been enabled.

Motto Flux portal SIM card settings:

Device: SIM card Registration server: IP or DNS name of the Session Border Controller.

 SRV option 	(disabled)

Port: 5060 (SIP port) From user: (extension of the user object)

Username: (international format of the mobile number example: 31612345678) Password: (password of the user object)

DTMF signaling mode: auto

Register the SIM. Check the registration on the SBC and PBX using the logging.

Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed.