Howto:NL - MOTTO - VaMo Configuration

NL Motto VaMo configuration.

This configuration if for registering a Motto Sim card to the PBX using a Innovaphone Session Border Controller.

PBX configuration:

Create a new user object.

 Description: 	Motto VaMo
 Long Name: 	Name of the user
 Display Name:  	Name of the user	
 Name:		(international format of the mobile number example: 31612345678)
 Number:		(extension number for this user)

 Password:	(password for the SIP registration)	
 Hardware Id:	(international format of the mobile number example: 31612345678)
 PBX password:	On

Session Border Controller object setup:

On he SBC create a net Session Border object for the SIM:

 Long Name: 	Name of the user
 Password:	(password for the SIP registration)
 Media Relay: 	On

 Gatekeeper Id:	ID of the PBX
 Primary Adr:	IP of the PBX
 Name:		(international format of the mobile number example: 31612345678)
PBX Password:	On

Name:		(extension number for this user)
PBX Password:	Off
TLS Only:	Off
Press OK

Set Sip config on the PBX and SBC:

Set this option using Maintenance, Diagnostics, Command.

!config add SIP /take-source-addr-as-contact-addr /x-ice-disabled
!config write
!config activate

reboot the PBX and SBC to be sure these options have been enabled.

Motto Flux portal SIM card settings:

 Device: 		SIM card 
 Registration server:	IP or DNS name of the Session Border Controller.
 SRV option 	(disabled)
 Port: 			5060 (SIP port)
 From user: 		(extension of the user object)

 Username: 		(international format of the mobile number example: 31612345678)
Password: 		(password of the user object)

DTMF signaling mode: auto

Register the SIM. Check the registration on the SBC and PBX using the logging.

Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed.