Howto:V6 and V7 on IP21, IP200 (old), IP202 and IP400: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
(New page: ==Summary== … Running V6 PBX on IP202 ,IP400 and IP21 ==Applies To== This information applies to * IP400 * IP21 * IP202 ==More Information== …Due to memory reasons it is not poss...)
 
No edit summary
 
(21 intermediate revisions by 7 users not shown)
Line 1: Line 1:
==Summary==
Due to flash and dram memory limitations, full the V6 feature set is not available on some older innovaphone platforms.  You should generally consider replacing IP400 by IP305, as well as IP202 by a combination of IP110/IP200 and IP302.  We recommend to use IP400 as an ISDN gateway only with V6 firmware. We do not recommend to upgrade working IP400 PBX installations to V6. 
… Running V6 PBX on IP202 ,IP400 and IP21


==Applies To==
==Applies To==
Line 6: Line 5:


* IP400
* IP400
* IP21
* IP21
 
* IP200 (the old one, not IP200A, see label on the back)
* IP202
* IP202




==More Information==
==More Information==
…Due to memory reasons it is not possible to run V6 PBX on IP400, IP21 and IP202 with 8 MB Ram and 2MB Flash.
=== Running V6 up to and including V6 SR1 ===
On all IP400, all IP21 and IP202 with 8 MB Ram and 2MB Flash (see the info screen for details on how much memory your IP202 features), the V6 PBX will not run.  The IP400 and IP21 firmware thus does not include the PBX at all.
For the IP202, there are 2 downloads available, '''ip202.bin''' which includes the PBX and '''ip202phone.bin''' which does not.  '''ip202.bin''' will not work on older IP202 platforms with only 2MB flash memory.


Normal V6 Gateway/Gatekeeper (Protocols H.323/SIP)  – aka “Relay” will still work on IP400 and IP21.
The V6 Gateway/Gatekeeper - aka “Relay” - will still work on IP400 and IP21, but not on the smaller IP202 (in fact, the '''ip202phone.bin''' is identical to the '''ip200.bin''').


It is not possible to run V6 Pbx on IP202 with 8MB Ram and 2 MB Flash.
You can check the size of flash/dram at the webinterface of your unit (General -> Info). A line like '''Version V5.01 sr1-hotfix IP202[05-5874], Bootcode[336], HW[224] ''4096''/''8192''''' indicates 4MB flash and 8MB dram.


With V6 you can run the  IP202 with 8 MB Ram and 2 MB Flash only as Phone.
<center>
{| border=1
|+V6 PBX compatibility for old devices
!width=160|
!width=150|V5 Gateway and PBX
!width=100|V6 Gateway
!width=100|V6 PBX
|----
|IP21
|Yes
|Yes
|No
|----
|IP400
|Yes
|Yes
|No
|----
|IP202 with 2MB Flash
|Yes
|No
|No
|----
|IP202 with 4MB Flash
|Yes
|Yes
|Yes
|}
</center>


If you have an IP202 with 8MB Ram and 4 MB Flash (newer generation) you can run it with V6 as Phone,
=== Running V6 SR2 ===
From V6 SR2, there are addtional limitations.


Gateway/Gatekeeper and V6 Pbx (as it was in V5).
The IP200 (not IP200A) and IP202 with 2 MB Flash will include neither PPP nor NAT (this means no PPTP and PPPoE either).  The phone can thus not be used as a router anymore.


V6 Pbx needs minimum 4 MB Flash because of Firmware image, Vars and direcorty.
The IP400 does not include PPP (and thus no PPTP or PPPoE either), NAT, Telnet, Update, Aping, TCP-SIP und - as before - the PBX.


Minimum of 8Mb Ram because the V6 Pbx Code needs for itself minimum of 4 MB Ram
=== Running V6 SR2 HF8===
From V6 SR2 HF8, there are additional limitations.


IP21 with 2MB flash is running out of flash space.  You will need to save the config, do a factory reset, re-upload the config and finally  before upload the new firmware.  This procedure will optimize flash memory usage. 


=== Running V7===


== Related Articles ==
There is No V7 support for IP21, IP400, IP600, IP1500, IP202 and IP200 (the old one, not IP200A, see label on the back).<br>
Please note the [[Howto:Firmware Upgrade V6 V7|information regarding the V7 firmware upgrade]]!


=== Running V8 ===
There is no V8 support for IP600, IP1500, IP3000, IP3000DD, IP21, IP400, IP202 and IP200 (the old one, not IP200A, see label on the back).




[[Category:Faq]]
[[Category:Faq|{{PAGENAME}}]]

Latest revision as of 12:54, 24 November 2009

Due to flash and dram memory limitations, full the V6 feature set is not available on some older innovaphone platforms. You should generally consider replacing IP400 by IP305, as well as IP202 by a combination of IP110/IP200 and IP302. We recommend to use IP400 as an ISDN gateway only with V6 firmware. We do not recommend to upgrade working IP400 PBX installations to V6.

Applies To

This information applies to

  • IP400
  • IP21
  • IP200 (the old one, not IP200A, see label on the back)
  • IP202


More Information

Running V6 up to and including V6 SR1

On all IP400, all IP21 and IP202 with 8 MB Ram and 2MB Flash (see the info screen for details on how much memory your IP202 features), the V6 PBX will not run. The IP400 and IP21 firmware thus does not include the PBX at all. For the IP202, there are 2 downloads available, ip202.bin which includes the PBX and ip202phone.bin which does not. ip202.bin will not work on older IP202 platforms with only 2MB flash memory.

The V6 Gateway/Gatekeeper - aka “Relay” - will still work on IP400 and IP21, but not on the smaller IP202 (in fact, the ip202phone.bin is identical to the ip200.bin).

You can check the size of flash/dram at the webinterface of your unit (General -> Info). A line like Version V5.01 sr1-hotfix IP202[05-5874], Bootcode[336], HW[224] 4096/8192 indicates 4MB flash and 8MB dram.

V6 PBX compatibility for old devices
V5 Gateway and PBX V6 Gateway V6 PBX
IP21 Yes Yes No
IP400 Yes Yes No
IP202 with 2MB Flash Yes No No
IP202 with 4MB Flash Yes Yes Yes

Running V6 SR2

From V6 SR2, there are addtional limitations.

The IP200 (not IP200A) and IP202 with 2 MB Flash will include neither PPP nor NAT (this means no PPTP and PPPoE either). The phone can thus not be used as a router anymore.

The IP400 does not include PPP (and thus no PPTP or PPPoE either), NAT, Telnet, Update, Aping, TCP-SIP und - as before - the PBX.

Running V6 SR2 HF8

From V6 SR2 HF8, there are additional limitations.

IP21 with 2MB flash is running out of flash space. You will need to save the config, do a factory reset, re-upload the config and finally before upload the new firmware. This procedure will optimize flash memory usage.

Running V7

There is No V7 support for IP21, IP400, IP600, IP1500, IP202 and IP200 (the old one, not IP200A, see label on the back).
Please note the information regarding the V7 firmware upgrade!

Running V8

There is no V8 support for IP600, IP1500, IP3000, IP3000DD, IP21, IP400, IP202 and IP200 (the old one, not IP200A, see label on the back).

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:V6_and_V7_on_IP21,_IP200_(old),_IP202_and_IP400&oldid=15842"