Reference:Configuration/General/SNMP: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (General SNMP moved to Reference:Configuration/General/SNMP) |
(No difference)
|
Revision as of 12:24, 29 March 2007
The VoIP device allows the operating state to be monitored using SNMP (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or downloaded directly in the download area of the innovaphone homepage (http://www.innovaphone.com).
- Community: If the standard community name public is not being used, a different community name can be entered in this field.
- Device Name: For more detailed information, a device name can be specified here for the SNMP agent.
- Contact: As can a contact person (Contact).
- Location: As can a location (Location).
- Authentication Trap: Access via SNMP is only possible if the correct community name is entered. If this check box is checked, a trap is generated in the case of access with an incorrect community name.
- Trap Destination: Destinations for trap messages also have to be defined if the device is to trigger the traps defined in the manufacturer-specific innovaphone MIB.
- Allowed Networks: To increase security, access to the device can be restricted by restricting SNMP access to a defined list of computers or IP address ranges.