Reference:Feature Codes

On anlog lines and on DECT handsets multiple features can be invoked by dialing feature codes. In general this has to be enabled by configuration so that it can be used. For all features a default for the invocation code is defined, but this default can be changed on a per system basis. The following features are available:

CFU activate/deactivate

These codes allows to activate and deactivate unconditional call forward for a given endpoint. For H.323 this call forwarding is set in the PBX using H.450 operations. For SIP the call forwarding is set locally.

The default codes are *21*$# to activate and #21# to deactivate. $ stands for the number to which calls are forwarded.

CFB activate/deactivate

These codes allows to activate and deactivate call forward on busy for a given endpoint. For H.323 this call forwarding is set in the PBX using H.450 operations. For SIP the call forwarding is set locally.

The default codes are *67*$# to activate and #67# to deactivate. $ stands for the number to which calls are forwarded.

CFNR activate/deactivate

These codes allows to activate and deactivate call forward on no response for a given endpoint. For H.323 this call forwarding is set in the PBX using H.450 operations. For SIP the call forwarding is set locally.

The default codes are *61*$# to activate and #61# to deactivate. $ stands for the number to which calls are forwarded.

Set Pin

This code allows to set a pin which can be used to lock/unlock the endpoint.

The default code for this is *99*$*$*$#. The $ stand for the three argument this feature code requires: The old pin and two times the new pin. The default for the pin is '0000'.

Lock/Unlock

These codes allow to Lock and Unlock the phone. If the phone is locked no calls can be made.

The default codes are *33*$# to lock and #33*$# to unlock. $ stands for the PIN.