Howto:Phone Features when registering an innovaphone Phone to the PBX with SIP: Difference between revisions
(New page: ==Summary== ==Certification Status== <!--{{Template:Compat Status "tested"}}--> <!-- {{Template:Compat Status "in progress"}} --> <!-- {{Template:Compat_Status_"referral_prod."|certifi...) |
m (→Summary) |
||
(82 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
==Summary== | ==Summary== | ||
Innovaphone always recommend when registering an Innovaphone Endpoint to Innovaphone PBX to use H.323 to have full features available. | |||
However in some cases costumer wish to use SIP for the communication between PBX and IP Phones for example when exist firewalls/software that analyze the SIP Traffic in the network. | |||
For that reason this article explains which features currently will not work when using the SIP Protocol in the Innovaphone Phone registered on an Innovaphone PBX. | |||
Specific features that are not expected to work since they are only implemented with H.323 Signalling: | |||
* Recall/Callback if User busy | |||
* Presence on Ringing Message | |||
* Call Forwarding State from PBX not updated in the IP Phone Screen. | |||
* Call Forwarding FunctionKey | |||
* Join Groups FunctionKey | |||
* Park FunctionKey | |||
* Group Indications | |||
* Intrude/Call Intrusion | |||
* Physical Location (@PBX) | |||
* Application Sharing with myPBX | |||
* Standby PBX with 2GK Registration | |||
PBX Provisioning of the User config to the Phone when using SIP it's possible, the settings of the user are sent using SIP Options after the registration. | |||
Note: Could exist other features that are not listed in this Test Report that could not work, we tried to cover the most of them in this article. | |||
==Certification Status== | ==Certification Status== | ||
<!--{{Template:Compat Status "tested"}}--> | <!--{{Template:Compat Status "tested"}}--> | ||
<!-- {{Template:Compat Status "in progress"}} --> | <!--{{Template:Compat Status "in progress"}}--> | ||
<!-- {{Template:Compat_Status_"referral_prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} --> | <!-- {{Template:Compat_Status_"referral_prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} --> | ||
<!-- {{Template:Compat_Status_"engineered_prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} --> | <!-- {{Template:Compat_Status_"engineered_prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} --> | ||
<!-- {{Template:Compat_Status_"rec._prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} --> | <!-- {{Template:Compat_Status_"rec._prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} --> | ||
{{Template:Compat Status "tested"}} | |||
<!-- {{Template:Compat Status "rejected"}} --> | <!-- {{Template:Compat Status "rejected"}} --> | ||
<!-- {{Template:Compat_Status_"referral_prod."-no-certificate}} --> | <!-- {{Template:Compat_Status_"referral_prod."-no-certificate}} --> | ||
Testing of this product has been finalized April 28th, 2015. | |||
==Version== | ==Version== | ||
*Tested Devices | |||
** Innovaphone PBX version V11rs2 | |||
** Innovaphone IP222 with v11sr2 | |||
Note: Besides the difference of coders this information should apply to IP110,IP200,IP230,IP240,IP241,IP2x2,IP11x | |||
== Test Setup == | == Test Setup == | ||
Line 41: | Line 57: | ||
|---- | |---- | ||
|Register Device w/o specific configuration (requires DHCP) | |Register Device w/o specific configuration (requires DHCP) | ||
| | |OK | ||
|---- | |---- | ||
|DHCP is default | |DHCP is default | ||
| | |OK | ||
|---- | |---- | ||
|DHCP yields timeserver and time displays correctly | |DHCP yields timeserver and time displays correctly | ||
| | |OK | ||
|---- | |---- | ||
|SNTP config has TZ string for timezone/dst autoconfig | |SNTP config has TZ string for timezone/dst autoconfig | ||
| | |OK | ||
|---- | |---- | ||
|DHCP yields correct default gateway | |DHCP yields correct default gateway | ||
| | |OK | ||
|---- | |---- | ||
|Device supports magic registration (e.g. by serial) | |Device supports magic registration (e.g. by serial) | ||
| | |OK | ||
|---- | |---- | ||
|Fixed registrations works | |Fixed registrations works | ||
| | |OK | ||
|---- | |---- | ||
|Device registers w/o Extension (just by name) | |Device registers w/o Extension (just by name) | ||
| | |OK | ||
|---- | |---- | ||
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ) | |Device registers by name with non-latin1 characters (e.g. UserÄÖÜ) | ||
| | |OK | ||
|---- | |---- | ||
|Device registers by extension | |Device registers by extension | ||
| | |OK | ||
|---- | |---- | ||
|Device registers with password | |Device registers with password | ||
| | |OK | ||
|---- | |---- | ||
|Device registers multiple identities | |Device registers multiple identities | ||
| | |OK | ||
|---- | |---- | ||
|2nd GK is supported (mit SIP??) | |2nd GK is supported (mit SIP??) | ||
| | |NOK | ||
|---- | |---- | ||
|Changing registrations between GK1 and GK2 (mit SIP??) | |Changing registrations between GK1 and GK2 (mit SIP??) | ||
| | |NOK | ||
|---- | |---- | ||
|PBX redirect (UserObject on Master/Phone at Slave registered) | |PBX redirect (UserObject on Master/Phone at Slave registered) | ||
| | |OK | ||
|---- | |---- | ||
|Physical Location (@PBX) correct? | |Physical Location (@PBX) correct? | ||
| | |NOK | ||
|---- | |---- | ||
|Device supports STUN protocol | |Device supports STUN protocol | ||
| | |OK | ||
|---- | |---- | ||
|Device sends NAT - keepalive messages | |Device sends NAT - keepalive messages | ||
| | |OK | ||
|---- | |---- | ||
|Device usable in [[Howto:Hosting | hosting]] scenarios? | |Device usable in [[Howto:Hosting | hosting]] scenarios? | ||
| | |OK | ||
|---- | |---- | ||
|Device refreshes the PBX registration | |Device refreshes the PBX registration | ||
| | |OK | ||
|---- | |---- | ||
|Device supports SIP over TCP | |Device supports SIP over TCP | ||
| | |OK | ||
|---- | |---- | ||
|Device supports SRTP | |Device supports SRTP (SDES) | ||
| | |OK | ||
|---- | |||
|Device supports DTLS | |||
|OK | |||
|---- | |||
|Device supports ICE | |||
|OK | |||
|---- | |---- | ||
|Device supports SIPS (SIP over TLS) | |Device supports SIPS (SIP over TLS) | ||
| | |OK | ||
|---- | |---- | ||
|Device supports HTTPS | |Device supports HTTPS | ||
| | |OK | ||
|---- | |---- | ||
|Device supports VAD (Voice activity detection) | |Device supports VAD (Voice activity detection) | ||
| | |OK | ||
|---- | |---- | ||
|Device supports Auto-Answer (needed when used with CTI client) | |Device supports Auto-Answer (needed when used with CTI client) | ||
| | |OK | ||
|---- | |||
|Device supports Provisioning via PBX | |||
|OK | |||
|---- | |---- | ||
|Supported menu languages | |Supported menu languages | ||
| | |19 | ||
|} | |} | ||
==Test Results== | ==Test Results== | ||
<!-- | |||
{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}} | {{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}} --> | ||
=== Basic Call === | === Basic Call === | ||
Line 133: | Line 158: | ||
|---- | |---- | ||
|call using g711a | |call using g711a | ||
| | |OK | ||
|---- | |---- | ||
|call using g711u | |call using g711u | ||
| | |OK | ||
|---- | |---- | ||
|call using g729 | |call using g729 | ||
| | |OK | ||
|---- | |---- | ||
|call using g722 | |call using g722 | ||
| | |OK | ||
|---- | |---- | ||
|Overlapped sending | |Overlapped sending | ||
| | |OK | ||
|---- | |---- | ||
|Device shows called id number | |Device shows called id number | ||
| | |OK | ||
|---- | |---- | ||
|Device shows called id name | |Device shows called id name | ||
| | |OK | ||
|---- | |---- | ||
|Device shows called id display info | |Device shows called id display info | ||
| | |OK | ||
|---- | |---- | ||
|CGPN can be suppressed | |CGPN can be suppressed | ||
| | |OK | ||
|---- | |---- | ||
|Reverse Media Negotiation | |Reverse Media Negotiation | ||
| | |OK | ||
|---- | |---- | ||
|Device shows CDPN/CGPN on incoming call | |Device shows CDPN/CGPN on incoming call | ||
| | |OK | ||
|---- | |---- | ||
|Device shows CDPN/CGPN on outgoing call | |Device shows CDPN/CGPN on outgoing call | ||
| | |OK | ||
|---- | |---- | ||
|Device shows connected number | |Device shows connected number | ||
| | |OK | ||
|---- | |---- | ||
|Device shows diverting number | |Device shows diverting number | ||
| | |OK | ||
|---- | |---- | ||
|Device supports distinctive ringing | |Device supports distinctive ringing | ||
| | |OK | ||
|---- | |---- | ||
|Device supports asymetric codec negotiation | |Device supports asymetric codec negotiation | ||
| | |OK | ||
|---- | |---- | ||
|Device supports codec renegotiation during a conversation | |Device supports codec renegotiation during a conversation | ||
| | |OK | ||
|---- | |---- | ||
|Device shows correct display message in case of busy CDPN | |Device shows correct display message in case of busy CDPN | ||
| | |OK | ||
|---- | |---- | ||
|Device shows correct display message in case of not existing CDPN | |Device shows correct display message in case of not existing CDPN | ||
| | |OK | ||
|---- | |---- | ||
|Device shows correct display message in case that the call is declined | |Device shows correct display message in case that the call is declined | ||
| | |OK | ||
|---- | |---- | ||
|3party conference possible | |3party conference possible | ||
| | |OK | ||
|---- | |---- | ||
|Device supports display updates during call(needed for Directory Search object) | |Device supports display updates during call(needed for Directory Search object) | ||
| | |OK | ||
|---- | |---- | ||
|Long Time Call (>30 min) works? | |Long Time Call (>30 min) works? | ||
| | |OK | ||
|---- | |---- | ||
|Registration redirecting works? | |Registration redirecting works? | ||
| | |OK | ||
|---- | |---- | ||
|Incoming SRTP call - SRTP not enabled on DUT | |Incoming SRTP call - SRTP not enabled on DUT | ||
| | |OK | ||
|---- | |---- | ||
|Incoming SRTP call - SRTP enabled on DUT | |Incoming SRTP call - SRTP enabled on DUT | ||
| | |OK | ||
|---- | |---- | ||
|Voice Quality OK? | |Voice Quality OK? | ||
| | |OK | ||
|---- | |||
|Recall/Callback if User busy | |||
|NA | |||
|---- | |||
|Presence on Ringing Message | |||
|NOK | |||
|---- | |||
|Intrude/Call Intrusion | |||
|NOK | |||
|} | |} | ||
Line 230: | Line 255: | ||
|---- | |---- | ||
|DTMF tones sent correctly | |DTMF tones sent correctly | ||
| | |OK | ||
|---- | |---- | ||
|DTMF tones received correctly | |DTMF tones received correctly | ||
| | |OK | ||
|---- | |||
|RFC 2833 Supported? | |||
|OK | |||
|---- | |||
|SIP INFO Supported? | |||
|OK | |||
|---- | |||
|Inband DTMF Supported? | |||
|OK | |||
|} | |} | ||
=== Hold/Retrieve === | === Hold/Retrieve === | ||
Line 244: | Line 277: | ||
|---- | |---- | ||
|Device handles incoming hold correctly | |Device handles incoming hold correctly | ||
| | |OK | ||
|---- | |---- | ||
|Device can put a call on hold using correctly(inactive or sendonly) | |Device can put a call on hold using correctly(inactive or sendonly) | ||
| | |OK | ||
|} | |} | ||
Line 258: | Line 291: | ||
|---- | |---- | ||
|inno1 calls inno2. inno2 transfers to testphone. | |inno1 calls inno2. inno2 transfers to testphone. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
||inno1 calls inno2. inno1 transfers to testphone. | ||inno1 calls inno2. inno1 transfers to testphone. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
|inno1 calls testphone. inno1 transfers to inno2. | |inno1 calls testphone. inno1 transfers to inno2. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
|inno1 calls testphone. testphone transfers to inno2. | |inno1 calls testphone. testphone transfers to inno2. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
|testphone calls inno1. inno1 transfers to inno2. | |testphone calls inno1. inno1 transfers to inno2. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
|testphone calls inno1. testphone transfers to inno2. | |testphone calls inno1. testphone transfers to inno2. | ||
| | |OK | ||
| | |OK | ||
|} | |} | ||
Line 290: | Line 323: | ||
|---- | |---- | ||
|inno1 calls inno2. inno2 transfers to testphone. | |inno1 calls inno2. inno2 transfers to testphone. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
||inno1 calls inno2. inno1 transfers to testphone. | ||inno1 calls inno2. inno1 transfers to testphone. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
|inno1 calls testphone. inno1 transfers to inno2. | |inno1 calls testphone. inno1 transfers to inno2. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
|inno1 calls testphone. testphone transfers to inno2. | |inno1 calls testphone. testphone transfers to inno2. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
|testphone calls inno1. inno1 transfers to inno2. | |testphone calls inno1. inno1 transfers to inno2. | ||
| | |OK | ||
| | |OK | ||
|---- | |---- | ||
|testphone calls inno1. testphone transfers to inno2. | |testphone calls inno1. testphone transfers to inno2. | ||
| | |OK | ||
| | |OK | ||
|} | |} | ||
Line 321: | Line 354: | ||
|---- | |---- | ||
|inno1 calls inno2. inno2 transfers to testphone. | |inno1 calls inno2. inno2 transfers to testphone. | ||
| | |OK | ||
|---- | |---- | ||
||inno1 calls inno2. inno1 transfers to testphone. | ||inno1 calls inno2. inno1 transfers to testphone. | ||
| | |OK | ||
|---- | |---- | ||
|inno1 calls testphone. inno1 transfers to inno2. | |inno1 calls testphone. inno1 transfers to inno2. | ||
| | |OK | ||
|---- | |---- | ||
|inno1 calls testphone. testphone transfers to inno2. | |inno1 calls testphone. testphone transfers to inno2. | ||
| | |OK | ||
|---- | |---- | ||
|testphone calls inno1. inno1 transfers to inno2. | |testphone calls inno1. inno1 transfers to inno2. | ||
| | |OK | ||
|---- | |---- | ||
|testphone calls inno1. testphone transfers to inno2. | |testphone calls inno1. testphone transfers to inno2. | ||
| | |OK | ||
|} | |} | ||
Line 346: | Line 379: | ||
|---- | |---- | ||
|inno1 calls inno2. inno2 transfers to testphone. | |inno1 calls inno2. inno2 transfers to testphone. | ||
| | |OK | ||
|---- | |---- | ||
|inno1 calls testphone. testphone transfers to inno2. | |inno1 calls testphone. testphone transfers to inno2. | ||
| | |OK | ||
|---- | |---- | ||
|testphone calls inno1. inno1 transfers to inno2. | |testphone calls inno1. inno1 transfers to inno2. | ||
| | |OK | ||
|} | |} | ||
Line 362: | Line 395: | ||
|---- | |---- | ||
|testphone makes call to a Broadcast Group. inno1 picks up. | |testphone makes call to a Broadcast Group. inno1 picks up. | ||
| | |OK | ||
|---- | |---- | ||
|inno1 makes call to a Broadcast Group. testphone picks up. | |inno1 makes call to a Broadcast Group. testphone picks up. | ||
| | |OK | ||
|---- | |---- | ||
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. | |testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. | ||
| | |OK | ||
|---- | |---- | ||
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. | |testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. | ||
| | |OK | ||
|---- | |---- | ||
|inno1 makes call to a Waiting Queue. testphone picks up. | |inno1 makes call to a Waiting Queue. testphone picks up. | ||
| | |OK | ||
|} | |} | ||
===Directory=== | ===Directory=== | ||
Line 437: | Line 421: | ||
|---- | |---- | ||
|Exists | |Exists | ||
| | |OK | ||
|---- | |---- | ||
|Can be dialled from | |Can be dialled from | ||
| | |OK | ||
|---- | |---- | ||
|Does CLI resolution | |Does CLI resolution | ||
| | |OK | ||
|---- | |---- | ||
|display update if directory object is used? | |display update if directory object is used? | ||
| | |OK | ||
|} | |} | ||
Line 456: | Line 440: | ||
|---- | |---- | ||
|External LDAP Server supported | |External LDAP Server supported | ||
| | |OK | ||
|---- | |---- | ||
|Can be dialled from | |Can be dialled from | ||
| | |OK | ||
|---- | |---- | ||
|Does CLI resolution | |Does CLI resolution | ||
| | |OK | ||
|---- | |---- | ||
|display update if directory object is used? | |display update if directory object is used? | ||
| | |OK | ||
|} | |} | ||
===Function Keys=== | |||
===Keys=== | |||
{| border="1" | {| border="1" | ||
Line 476: | Line 459: | ||
|---- | |---- | ||
|Device has speed dial keys | |Device has speed dial keys | ||
| | |OK | ||
|---- | |---- | ||
|Device has programmable function keys | |Device has programmable function keys | ||
| | |OK | ||
|---- | |---- | ||
|Device has partner keys | |Device has partner keys | ||
| | |OK | ||
|---- | |||
|Call Forwarding FunctionKey | |||
|NOK | |||
|---- | |||
|Join Groups FunctionKey | |||
|NOK | |||
|---- | |||
|Park FunctionKey | |||
|NOK | |||
|} | |} | ||
Line 492: | Line 484: | ||
|---- | |---- | ||
|User Call - outgoing call | |User Call - outgoing call | ||
| | |OK | ||
|---- | |---- | ||
|User Connect - Answer incoming call | |User Connect - Answer incoming call | ||
| | |OK | ||
|---- | |---- | ||
|User Reject - Reject alerting call | |User Reject - Reject alerting call | ||
| | |OK | ||
|---- | |---- | ||
|User Disconnect - Disconnect active call | |User Disconnect - Disconnect active call | ||
| | |OK | ||
|---- | |---- | ||
|User Hold - Put connected call on hold | |User Hold - Put connected call on hold | ||
| | |OK | ||
|---- | |---- | ||
|User Hold Retrieve - Retrieve call on hold | |User Hold Retrieve - Retrieve call on hold | ||
| | |OK | ||
|---- | |---- | ||
|User Transfer - Transfer with Consult | |User Transfer - Transfer with Consult | ||
| | |OK | ||
|---- | |---- | ||
|User Transfer - Transfer with Consult (Alerting only) | |User Transfer - Transfer with Consult (Alerting only) | ||
| | |OK | ||
|---- | |---- | ||
|User Transfer - Blind Transfer | |User Transfer - Blind Transfer | ||
| | |OK | ||
|---- | |---- | ||
|3PTY - Make 3rd Party Call | |3PTY - Make 3rd Party Call | ||
| | |OK | ||
|---- | |||
|Park Call / Retrieve Parked Call | |||
|OK | |||
|---- | |||
|Pickup Call | |||
|OK | |||
|---- | |---- | ||
|Connected Number Update on Display | |Connected Number Update on Display | ||
| | |OK | ||
|} | |} | ||
Line 532: | Line 530: | ||
|---- | |---- | ||
|Video calls possible? | |Video calls possible? | ||
| | |OK (with myPBX) | ||
|---- | |---- | ||
|Video conference possible? (max. amount of participants) | |Video conference possible? (max. amount of participants) | ||
| | |NA (feature of myPBX) | ||
|---- | |---- | ||
|Video Codecs | |Video Codecs | ||
| | |NA (feature of myPBX) | ||
|---- | |---- | ||
|enable/disable video during call | |enable/disable video during call | ||
| | |OK (video streaming stop/start) | ||
|---- | |||
|Application Sharing | |||
|NOK (with myPBX) | |||
|---- | |---- | ||
|Set own presence possible? | |Set own presence possible? | ||
| | |OK | ||
|---- | |---- | ||
|See presence of others possible? | |See presence of others possible? | ||
| | |OK | ||
|---- | |---- | ||
|send IM - messages to phones possible? | |send IM - messages to phones possible? | ||
| | |OK | ||
|} | |} | ||
== | == Related Articles == | ||
[[Reference:Supported_SIP_Features_and_List_of_RFC%27s | SIP Features and Supported RFCS]] | |||
<!--*[[Main_Page|wiki-innovaphone]]--> | <!--*[[Main_Page|wiki-innovaphone]]--> |
Latest revision as of 12:58, 20 July 2015
Summary
Innovaphone always recommend when registering an Innovaphone Endpoint to Innovaphone PBX to use H.323 to have full features available.
However in some cases costumer wish to use SIP for the communication between PBX and IP Phones for example when exist firewalls/software that analyze the SIP Traffic in the network.
For that reason this article explains which features currently will not work when using the SIP Protocol in the Innovaphone Phone registered on an Innovaphone PBX.
Specific features that are not expected to work since they are only implemented with H.323 Signalling:
- Recall/Callback if User busy
- Presence on Ringing Message
- Call Forwarding State from PBX not updated in the IP Phone Screen.
- Call Forwarding FunctionKey
- Join Groups FunctionKey
- Park FunctionKey
- Group Indications
- Intrude/Call Intrusion
- Physical Location (@PBX)
- Application Sharing with myPBX
- Standby PBX with 2GK Registration
PBX Provisioning of the User config to the Phone when using SIP it's possible, the settings of the user are sent using SIP Options after the registration.
Note: Could exist other features that are not listed in this Test Report that could not work, we tried to cover the most of them in this article.
Certification Status
The tests for this product have been completed.
Testing of this product has been finalized April 28th, 2015.
Version
- Tested Devices
- Innovaphone PBX version V11rs2
- Innovaphone IP222 with v11sr2
Note: Besides the difference of coders this information should apply to IP110,IP200,IP230,IP240,IP241,IP2x2,IP11x
Test Setup
Device Setup
Tested feature | Result |
---|---|
Register Device w/o specific configuration (requires DHCP) | OK |
DHCP is default | OK |
DHCP yields timeserver and time displays correctly | OK |
SNTP config has TZ string for timezone/dst autoconfig | OK |
DHCP yields correct default gateway | OK |
Device supports magic registration (e.g. by serial) | OK |
Fixed registrations works | OK |
Device registers w/o Extension (just by name) | OK |
Device registers by name with non-latin1 characters (e.g. UserÄÖÜ) | OK |
Device registers by extension | OK |
Device registers with password | OK |
Device registers multiple identities | OK |
2nd GK is supported (mit SIP??) | NOK |
Changing registrations between GK1 and GK2 (mit SIP??) | NOK |
PBX redirect (UserObject on Master/Phone at Slave registered) | OK |
Physical Location (@PBX) correct? | NOK |
Device supports STUN protocol | OK |
Device sends NAT - keepalive messages | OK |
Device usable in hosting scenarios? | OK |
Device refreshes the PBX registration | OK |
Device supports SIP over TCP | OK |
Device supports SRTP (SDES) | OK |
Device supports DTLS | OK |
Device supports ICE | OK |
Device supports SIPS (SIP over TLS) | OK |
Device supports HTTPS | OK |
Device supports VAD (Voice activity detection) | OK |
Device supports Auto-Answer (needed when used with CTI client) | OK |
Device supports Provisioning via PBX | OK |
Supported menu languages | 19 |
Test Results
Basic Call
Tested feature | Result |
---|---|
call using g711a | OK |
call using g711u | OK |
call using g729 | OK |
call using g722 | OK |
Overlapped sending | OK |
Device shows called id number | OK |
Device shows called id name | OK |
Device shows called id display info | OK |
CGPN can be suppressed | OK |
Reverse Media Negotiation | OK |
Device shows CDPN/CGPN on incoming call | OK |
Device shows CDPN/CGPN on outgoing call | OK |
Device shows connected number | OK |
Device shows diverting number | OK |
Device supports distinctive ringing | OK |
Device supports asymetric codec negotiation | OK |
Device supports codec renegotiation during a conversation | OK |
Device shows correct display message in case of busy CDPN | OK |
Device shows correct display message in case of not existing CDPN | OK |
Device shows correct display message in case that the call is declined | OK |
3party conference possible | OK |
Device supports display updates during call(needed for Directory Search object) | OK |
Long Time Call (>30 min) works? | OK |
Registration redirecting works? | OK |
Incoming SRTP call - SRTP not enabled on DUT | OK |
Incoming SRTP call - SRTP enabled on DUT | OK |
Voice Quality OK? | OK |
Recall/Callback if User busy | NA |
Presence on Ringing Message | NOK |
Intrude/Call Intrusion | NOK |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | OK |
DTMF tones received correctly | OK |
RFC 2833 Supported? | OK |
SIP INFO Supported? | OK |
Inband DTMF Supported? | OK |
Hold/Retrieve
Tested feature | Result |
---|---|
Device handles incoming hold correctly | OK |
Device can put a call on hold using correctly(inactive or sendonly) | OK |
Transfer with consultation
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | OK | OK |
inno1 calls inno2. inno1 transfers to testphone. | OK | OK |
inno1 calls testphone. inno1 transfers to inno2. | OK | OK |
inno1 calls testphone. testphone transfers to inno2. | OK | OK |
testphone calls inno1. inno1 transfers to inno2. | OK | OK |
testphone calls inno1. testphone transfers to inno2. | OK | OK |
Transfer with consultation (alerting only)
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | OK | OK |
inno1 calls inno2. inno1 transfers to testphone. | OK | OK |
inno1 calls testphone. inno1 transfers to inno2. | OK | OK |
inno1 calls testphone. testphone transfers to inno2. | OK | OK |
testphone calls inno1. inno1 transfers to inno2. | OK | OK |
testphone calls inno1. testphone transfers to inno2. | OK | OK |
Blind Transfer
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | OK |
inno1 calls inno2. inno1 transfers to testphone. | OK |
inno1 calls testphone. inno1 transfers to inno2. | OK |
inno1 calls testphone. testphone transfers to inno2. | OK |
testphone calls inno1. inno1 transfers to inno2. | OK |
testphone calls inno1. testphone transfers to inno2. | OK |
Blind Transfer (alerting only)
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | OK |
inno1 calls testphone. testphone transfers to inno2. | OK |
testphone calls inno1. inno1 transfers to inno2. | OK |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
testphone makes call to a Broadcast Group. inno1 picks up. | OK |
inno1 makes call to a Broadcast Group. testphone picks up. | OK |
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. | OK |
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. | OK |
inno1 makes call to a Waiting Queue. testphone picks up. | OK |
Directory
Tested feature | Result |
---|---|
Device built-in directory | |
Exists | OK |
Can be dialled from | OK |
Does CLI resolution | OK |
display update if directory object is used? | OK |
Tested feature | Result |
---|---|
External LDAP Server supported | OK |
Can be dialled from | OK |
Does CLI resolution | OK |
display update if directory object is used? | OK |
Function Keys
Tested feature | Result |
---|---|
Device has speed dial keys | OK |
Device has programmable function keys | OK |
Device has partner keys | OK |
Call Forwarding FunctionKey | NOK |
Join Groups FunctionKey | NOK |
Park FunctionKey | NOK |
CTI Features (with SOAP / TAPI / myPBX)
Tested feature | Result |
---|---|
User Call - outgoing call | OK |
User Connect - Answer incoming call | OK |
User Reject - Reject alerting call | OK |
User Disconnect - Disconnect active call | OK |
User Hold - Put connected call on hold | OK |
User Hold Retrieve - Retrieve call on hold | OK |
User Transfer - Transfer with Consult | OK |
User Transfer - Transfer with Consult (Alerting only) | OK |
User Transfer - Blind Transfer | OK |
3PTY - Make 3rd Party Call | OK |
Park Call / Retrieve Parked Call | OK |
Pickup Call | OK |
Connected Number Update on Display | OK |
UC Features
Tested feature | Result |
---|---|
Video calls possible? | OK (with myPBX) |
Video conference possible? (max. amount of participants) | NA (feature of myPBX) |
Video Codecs | NA (feature of myPBX) |
enable/disable video during call | OK (video streaming stop/start) |
Application Sharing | NOK (with myPBX) |
Set own presence possible? | OK |
See presence of others possible? | OK |
send IM - messages to phones possible? | OK |
Related Articles
SIP Features and Supported RFCS