Howto:Change the default admin password in the config file?: Difference between revisions
No edit summary |
mNo edit summary |
||
Line 1: | Line 1: | ||
If you need to set the admin account and password using the command line (e.g. in an update script), you can use the <code>config add /user account,password</code> function. The syntax | If you need to set the admin account and password using the command line (e.g. in an update script), you can use the <code>config add /user account,password</code> function. The syntax has not changed since firmware V5. | ||
example | example update script snippet: | ||
config change CMD0 /user admin,ip230 | |||
config activate | |||
From this point on, the new account settings are active. Admin | From this point on, the new account settings are active. Admin account settings of the innovaphone devices are stored in a hidden fashion so they can not be retrieved. | ||
However, if you use this configuration option, the | However, if you use this configuration option, the account and password information is practically available in clear text in the <code>config change CMD0 ...</code> line. | ||
To remove this clear text information from the configuration file, you need to perform some additional commands: | To remove this clear text information from the configuration file, you need to perform some additional commands: | ||
config rem CMD0 /user | |||
config activate | |||
Please note that there is no need to save the configuration to flash (i.e. perform a <code>config write</code> operation). However, if you have done a save to flash after setting the <code>/user</code> option, then you also need to save it after removing it with <code>config rem</code>. | Please note that there is no need to save the configuration to flash (i.e. perform a <code>config write</code> operation). However, if you have done a save to flash after setting the <code>/user</code> option, then you also need to save it after removing it with <code>config rem</code>. |
Revision as of 10:37, 16 July 2014
If you need to set the admin account and password using the command line (e.g. in an update script), you can use the config add /user account,password
function. The syntax has not changed since firmware V5.
example update script snippet:
config change CMD0 /user admin,ip230 config activate
From this point on, the new account settings are active. Admin account settings of the innovaphone devices are stored in a hidden fashion so they can not be retrieved.
However, if you use this configuration option, the account and password information is practically available in clear text in the config change CMD0 ...
line.
To remove this clear text information from the configuration file, you need to perform some additional commands:
config rem CMD0 /user config activate
Please note that there is no need to save the configuration to flash (i.e. perform a config write
operation). However, if you have done a save to flash after setting the /user
option, then you also need to save it after removing it with config rem
.
Related Articles
Howto:Upload configuration file to device with changed or different admin password