Howto:Configuration of Chef/Sek Functions: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| (27 intermediate revisions by one other user not shown) | |||
| Line 4: | Line 4: | ||
A third group may be configured, which defines all users which can call the executive directly, without the secretaries getting the call as well. | A third group may be configured, which defines all users which can call the executive directly, without the secretaries getting the call as well. | ||
All calls to the executive are | All calls to the executive are sent to the secretary groups. If there are users in the primary group, the call is sent to primary, if not to users in the secondary group. | ||
All calls to the secretary groups are sent as diverted calls, with the executive as diverting user. | All calls to the secretary groups are sent as diverted calls, with the executive as diverting user. | ||
Any call to the executive, as long as the call was sent to a secretary as well is also | Any call to the executive (if the flag call executive is enabled), as long as the call was sent to a secretary as well is also signalled as diverted call. This way the ringing of the executive phone can be configured to ring differently if the call rings at a secretary or not. | ||
==Applies To== | ==Applies To== | ||
This information applies to | This information applies to | ||
* innovaphone PBX | |||
* all innovaphone phones | * all innovaphone phones | ||
| Line 24: | Line 25: | ||
|- | |- | ||
|Add a user executive | |Add a user executive | ||
|Add a new user. Select | |Add a new user. Select object ''executive''. Fill in name, nickname, number and pbx. The drop-down lists for the secretary groups are empty. | ||
|- | |- | ||
| | | | ||
| Line 30: | Line 31: | ||
|- | |- | ||
| | | | ||
|Add groups to the | |Add groups to the executive object with the name primary, secondary and direct-call. Mark these groups as active. | ||
|- | |- | ||
| | | | ||
|Open the executive | |Open the executive object again. Now the drop-down lists for groups are not empty. Select for primary secretaries the group primary … | ||
|- | |- | ||
|Add users for the secretaries | |Add users for the secretaries | ||
|Add two | |Add two user objects, primary-secretary and secondary-secretary. Add group (''dynamic-in)'' primary to primary-secretary, secondary (''dynamic-in'')to secondary-secretary. | ||
|- | |- | ||
| | | | ||
|Register a phone to primary-secretary | |Register a phone to primary-secretary. Additionally you would use a function key (Join group) on the phone of the secretary to join or un-join to the primary group. | ||
|- | |- | ||
|Call executive with primary secretary | |Call executive with primary-secretary | ||
|Call executive. | |Call executive. Only the secretary phone rings. The calls are sent as diverted calls, so the secretary sees that the call was originally for the executive. | ||
|- | |- | ||
| | | | ||
|Register a phone to secondary secretary. Call executive. Still | |Register a phone to secondary secretary. Call executive. Still primary-secretary is called. | ||
|- | |- | ||
|Call executive with secondary secretary | |Call executive with secondary secretary | ||
| | |Un-join the users from the primary group. Call executive. The call is sent to the secondary as diverted call. | ||
|- | |- | ||
|Executive calls secretary | |Executive calls secretary | ||
| Line 54: | Line 55: | ||
|- | |- | ||
|Direct-call | |Direct-call | ||
|Add group direct-call to a phone, do not mark it as active (in typical installations all the secretaries | |Add group direct-call to a phone, do not mark it as active (in typical installations all the secretaries are member of this group). Call the executive from this phone. The call is sent as non-diverted call to the executive, no secretary phone rings. | ||
|- | |- | ||
| | | | ||
|Without any Primary and Secondary | |Without any Primary and Secondary phone in the groups: Only Executive Phone rings, it<nowiki>’</nowiki>s as non-diverted call. | ||
|- | |||
|Call executive (with the call executive flag enabled) with primary or secretary | |||
|Call executive. The call is sent to executive and secondary as diverted call. | |||
|- | |- | ||
|Executive reject call | |Executive reject call | ||
|Call executive. Executive rejects call by pressing disconnect. Secretary phones keep on ringing. | |Call executive (with the call executive flag enabled). Executive rejects call by pressing disconnect. Secretary phones keep on ringing. | ||
|} | |} | ||
| Line 92: | Line 96: | ||
|- | |- | ||
| | | | ||
|If both executive and all secretaries are busy, the diversion is executed | |If both executive and all secretaries are busy, the diversion is executed, depending on the ''busy on... calls'' setting at the executive and secretary object. | ||
|- | |- | ||
|CFNR | |CFNR | ||
| Line 98: | Line 102: | ||
|- | |- | ||
| | | | ||
|Call executive. If the call is not answered the diversion is executed. | |Call executive. If the call is not answered the diversion is executed. | ||
|- | |- | ||
| | | | ||
|If the call is answered by the executive or the secretary, the diversion is not executed. | |If the call is answered by the executive or the secretary, the diversion is not executed. | ||
|} | |} | ||
===Diversions at Secretary=== | ===Diversions at Secretary=== | ||
The call to the secretary may be diverted using CFU or | The call to the secretary may be diverted using CFU , CFNR or CFB | ||
{|border="2" cellspacing="0" cellpadding="4" width="91%" | {|border="2" cellspacing="0" cellpadding="4" width="91%" | ||
| Line 118: | Line 121: | ||
|- | |- | ||
| | | | ||
|Call | |Call executive. The diversion is executed, but the executive phone rings as well (only when the ''Call executive'' flag is set). | ||
|- | |- | ||
|CFNR | |CFNR | ||
| Line 124: | Line 127: | ||
|- | |- | ||
| | | | ||
|Call executive. If the call is not answered the diversion is executed. The executive phone keeps on ringing. | |Call executive. If the call is not answered the diversion is executed. The executive phone keeps on ringing (only when the ''Call executive'' flag is set). | ||
|- | |- | ||
| | | | ||
|If the call is answered by the executive or the secretary, the diversion is not executed. | |If the call is answered by the executive or the secretary, the diversion is not executed. | ||
|- | |||
|CFB | |||
|Configure a CFB at primary-secretary | |||
|- | |||
| | |||
|Call executive. The secretary is busy .The diversion is executed (and the executive phone keeps on ringing too, when the ''call executive'' flag is set). | |||
|} | |} | ||
===Call Completion=== | |||
===Call | It is not possible to set a call completion to an executive , except when the caller is part of the ''direct call'' group. | ||
== New in V9 == | |||
There are some enhanced features with V9. | |||
* Secretary can initiate calls with the CLIP (extension) from the executive. Off hook, press the executive partner key and dial the number. | |||
Use the partner type ''Executive'' at the [[Reference9:Phone/User/Function-Keys/Partner]] function key. | |||
* Executive can see if the secretary is joined or unjoined in the primary secretary group. Also the executive sees if a call diversion (CFX) is set at the secretary. | |||
Use the partner type ''Secretary'' at the [[Reference9:Phone/User/Function-Keys/Partner]] function key. | |||
* If a secretary has call waiting disabled and the secretary is in a call, anyone can still call the executive and the call is offered to the secretary. | |||
Enable ''Use Call Offer'' at the [[Reference9:PBX/Objects/Executive]] object. | |||
[[Category:Howto|{{PAGENAME}}]] | [[Category:Howto|{{PAGENAME}}]] | ||
<!-- chef sec sekretär sekretärin executive --> | <!-- chef sec sekretär sekretärin executive chese boss --> | ||
Latest revision as of 20:13, 12 June 2013
Summary
The user type executive is used for executive/secretary functions. The phone of the executive is registered to this user. Two groups can be configured for this user: Secretary Primary and Secretary Secondary. The Secretary Primary group defines the secretaries which are assigned to this executive. The Secretary Secondary group defines the secretaries which may act in place of the secretaries which are assigned to the executive.
A third group may be configured, which defines all users which can call the executive directly, without the secretaries getting the call as well.
All calls to the executive are sent to the secretary groups. If there are users in the primary group, the call is sent to primary, if not to users in the secondary group.
All calls to the secretary groups are sent as diverted calls, with the executive as diverting user.
Any call to the executive (if the flag call executive is enabled), as long as the call was sent to a secretary as well is also signalled as diverted call. This way the ringing of the executive phone can be configured to ring differently if the call rings at a secretary or not.
Applies To
This information applies to
- innovaphone PBX
- all innovaphone phones
More Information
Basic Functionality
| Function | ToDo |
| Add a user executive | Add a new user. Select object executive. Fill in name, nickname, number and pbx. The drop-down lists for the secretary groups are empty. |
| Register a phone to this object. Check if calls to/from this phone are possible. Calls to the executive are sent as normal (not diverted) calls. | |
| Add groups to the executive object with the name primary, secondary and direct-call. Mark these groups as active. | |
| Open the executive object again. Now the drop-down lists for groups are not empty. Select for primary secretaries the group primary … | |
| Add users for the secretaries | Add two user objects, primary-secretary and secondary-secretary. Add group (dynamic-in) primary to primary-secretary, secondary (dynamic-in)to secondary-secretary. |
| Register a phone to primary-secretary. Additionally you would use a function key (Join group) on the phone of the secretary to join or un-join to the primary group. | |
| Call executive with primary-secretary | Call executive. Only the secretary phone rings. The calls are sent as diverted calls, so the secretary sees that the call was originally for the executive. |
| Register a phone to secondary secretary. Call executive. Still primary-secretary is called. | |
| Call executive with secondary secretary | Un-join the users from the primary group. Call executive. The call is sent to the secondary as diverted call. |
| Executive calls secretary | From the executive phone call the number of executive. The call is sent to primary-secretary (or secondary-secretary) as non-diverted call. |
| Direct-call | Add group direct-call to a phone, do not mark it as active (in typical installations all the secretaries are member of this group). Call the executive from this phone. The call is sent as non-diverted call to the executive, no secretary phone rings. |
| Without any Primary and Secondary phone in the groups: Only Executive Phone rings, it’s as non-diverted call. | |
| Call executive (with the call executive flag enabled) with primary or secretary | Call executive. The call is sent to executive and secondary as diverted call. |
| Executive reject call | Call executive (with the call executive flag enabled). Executive rejects call by pressing disconnect. Secretary phones keep on ringing. |
Call-Diversions at Executive
The executive may divert his calls using CFU, CFB or CFNR
- A CFU diverts the calls unconditional. No secretary phone is called
- A CFNR diverts the call to executive if neither the secretary or the executive answers the call. After the diversion is executed, the secretary phone continues to ring
- A CFB is only executed when both executive and secretary are busy.
| Function | ToDo |
| CFU | Configure a CFU at the executive phone |
| Call executive. The diversion is executed | |
| CFB | Configure a CFB at the executive phone |
| If only executive or secretary are busy, the diversion is not executed | |
| If both executive and all secretaries are busy, the diversion is executed, depending on the busy on... calls setting at the executive and secretary object. | |
| CFNR | Configure a CFNR at the executive phone |
| Call executive. If the call is not answered the diversion is executed. | |
| If the call is answered by the executive or the secretary, the diversion is not executed. |
Diversions at Secretary
The call to the secretary may be diverted using CFU , CFNR or CFB
| Function | ToDo |
| CFU | Configure a CFU at primary-secretary |
| Call executive. The diversion is executed, but the executive phone rings as well (only when the Call executive flag is set). | |
| CFNR | Configure a CFNR at primary-secretary |
| Call executive. If the call is not answered the diversion is executed. The executive phone keeps on ringing (only when the Call executive flag is set). | |
| If the call is answered by the executive or the secretary, the diversion is not executed. | |
| CFB | Configure a CFB at primary-secretary |
| Call executive. The secretary is busy .The diversion is executed (and the executive phone keeps on ringing too, when the call executive flag is set). |
Call Completion
It is not possible to set a call completion to an executive , except when the caller is part of the direct call group.
New in V9
There are some enhanced features with V9.
- Secretary can initiate calls with the CLIP (extension) from the executive. Off hook, press the executive partner key and dial the number.
Use the partner type Executive at the Reference9:Phone/User/Function-Keys/Partner function key.
- Executive can see if the secretary is joined or unjoined in the primary secretary group. Also the executive sees if a call diversion (CFX) is set at the secretary.
Use the partner type Secretary at the Reference9:Phone/User/Function-Keys/Partner function key.
- If a secretary has call waiting disabled and the secretary is in a call, anyone can still call the executive and the call is offered to the secretary.
Enable Use Call Offer at the Reference9:PBX/Objects/Executive object.