Howto:How to use the IP21 DOOR interface

Applies To

This information applies to

• IP 21, V4,V5,V6

More Information

The door interface of the IP21 is built for connections between door openers.

Some of the door system are outdated and have been replaced with newer models.

Following there is a short compatibility list and some installations tips.

System Requirements

The IP21 DOOR interface supports only Doorline systems:

· Tiptel TSS 2

· Siedle TLM 511

· Siedle LM 511

· Siedle TL 352

· Ritto 5760/…

Installation

In the gateway manual you will find a table called pin assignment (page 31).

This is the relation between symbolic and real pins

IP21 – backside:

Power – Ethernet – Reset – Tel1 – Tel2 – AUX – DOOR pin 1 … 15

A description of the Door Interface could be found in the schematics called "TFE Aschaltanweisung". This document, describing the wiring of several door interfaces like SIEDLE(TM) and others, could be found on the link below.

Known Problems

The WT mode and non WT mode assignment is different – see schematics or contact support@innovaphone.com therefore