Howto:Upgrade pre-series IP72 to innovaphone's IP72 firmware: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
 
Line 1: Line 1:
This article describes procedure of Firmware upgrade from Ascom's i75 firmware to innovaphone's IP72 firmware via WLAN or USB interface.
The first lot of IP72 was erroneously shipped with Ascom i75 firmware installed.  This article describes procedure to upgrade the firmware to innovaphone's IP72 firmware via WLAN or USB interface.
 
'''Please note that standard Ascom i75 handsets ''cannot be upgraded'' to run IP72 firmware!  Also, innovaphone IP72 handsets cannot be migrated to Ascom i75 firmware.  '''


==Applies To==
==Applies To==
This information applies to an Ascom i75 phone branded as innovaphone IP72 with Ascom firmware installed on it.
This information solely applies to early innovaphone IP72 handsets with Ascom firmware installed on it.  It does not apply to standard Ascom i75 handsets.


===Problem Details===
===Problem Details===
In some cases you will need to update firmware before WLAN connection to the device is available. For that purposes you can use USB Charger for i75/IP72 to upload new firmware or change phone configuration.
Please contact [mailto:support@innovaphone.com innovaphone support] for information on how to fix the phones firmware to IP72 firmware.
 
===System Requirements===
*USB-Charger (not required if upgraded via WLAN)
*[http://download.innovaphone.com/beta/i75/IP72_upgrade/IP72_usb_driver.zip USB-driver] for MS Windows (not required if upgraded via WLAN)
*[http://download.innovaphone.com/beta/i75/IP72-trial-package.zip Ascom PDM Software] in case you have an Ascom i75 phone branded as innovaphone IP72 (not required if upgraded via WLAN)
*IP72 firmware [http://download.innovaphone.com/beta/i75/IP72_upgrade/ip72upgrade_07-60600.zip ip72upgrade.bin]
 
===Installation===
At first install USB Driver. Plug USB-Charger to any free USB-Port on your PC and wait till Windows Device Manager ask you for Driver location.
 
===Firmware Update (Ascom's PDM)===
Use Ascoms PDM Software to update to innovaphone firmware. Be sure to update to last Ascom Firmware(i75_v1.2.15.bin) before switch to IP72 firmware. Copy ip72upgrade.bin into
c:\Programme\Ascom Tateco\Portable Device Manager\Server\sw\
Then run software update via PDM Software.
 
===Firmware Update (WLAN/IP)===
Access the i75 with a browser, (default login: admin,changeme), select Software->Upgrade Software, select ip72upgrade.bin and start.
 
[[Image:Ascom_Upgrade.jpg]]
 
===Clear Config===
After upgrading the device from Ascom (i75) to innovaphone IP72 firmware, clear the configuration stored in flash by resetting the phone to factory defaults: in the IP72 main menu: Administration-Reset-to-Fact.-Defaults.
 
===Further Configuration===
see [[ Howto:Firmware_Upgrade_and_initial_Configuration_of_IP72_via_USB | Firmware Upgrade and initial Configuration of IP72 via USB ]]

Latest revision as of 11:10, 1 December 2009

The first lot of IP72 was erroneously shipped with Ascom i75 firmware installed. This article describes procedure to upgrade the firmware to innovaphone's IP72 firmware via WLAN or USB interface.

Please note that standard Ascom i75 handsets cannot be upgraded to run IP72 firmware! Also, innovaphone IP72 handsets cannot be migrated to Ascom i75 firmware.

Applies To

This information solely applies to early innovaphone IP72 handsets with Ascom firmware installed on it. It does not apply to standard Ascom i75 handsets.

Problem Details

Please contact innovaphone support for information on how to fix the phones firmware to IP72 firmware.

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Upgrade_pre-series_IP72_to_innovaphone%27s_IP72_firmware&oldid=15936"