Reference7:Configuration/General/Sync
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference7 (this version) | Reference9
For certain call types (such as fax, modem or transparent data), it is important for both ends to keep time with each other. To make sure a number of gateways are always in sync, you may configure a common clock source here. For this to work well, you should use a device as clock source that has a stable clock itself, e.g. a gateway that is synchronized to a public ISDN interface. Also, make sure the Interval is sufficiantly short (that is, you should keep the default of 1 second).
This clock source is not used to set the system time, use the NTP Configuration for this.
Configuration
Sync Server | IP address of clock source |
Interval | Polling interval in seconds |