Reference8:Administration/PBX/Objects/Mobility

The Mobility Object provides mobile extension services for users. These services are call waiting, hold retrieve, transfer and delayed call to a mobile extension. For a user a forking to the mobile number must be configured and within te forking configuration a Mobility object can be selected.

Configuration

Tone Interface	An PBX object to which a dial tone provider is registered. This can be used to off-load the media streaming for dial tones from the PBX. If left empty the local HTTP interface is used for dial tones
R-Key	DTMF sequence which is interpreted as R-Key (hook-flash). Default is '**'.
Delay(s)	Delay (in seconds) used to call the mobile number. If no delay is configured the mobile number is called without delay.

R-Key Functions

With the R-Key the services of handling multiple calls can be invoked. In the following table R-<digit> means the DTMF sequence for the R-Key followed by the DTMF for <digit>. For example if an R-Key sequence of '**' is configured R-0 means a DTMF sequence of '**0'.

R	Put active call on hold and get new dialtone. If there are other held or waiting calls, there will be a delay of 3s until this is executed.
R-0	Reject a Waiting call
R-1	Disconnect the active call and retrieve a held call.
R-2	Put the active call on hold and retrieve the held call.
R-3	No functionality, reserved for 3pty conference.
R-4	Tranfer Held call to the active call. Just haning up the call on the mobile device, when an active and a held call is present, does the same thing.