Search results
Jump to navigation
Jump to search
Google site results
Loading...
Wiki results
- Neither the IP200 nor IXI-UMS currently support MWI as per H.450.7 (although the IP100 does). IXI-UMS features a new MWI feature based on the ...459 bytes (71 words) - 19:47, 31 January 2008
- Filtered diversion do not appear on the IP Phone nor on myPBX. So extend the CFx settings in the PBX to the option "only not" and the ...607 bytes (100 words) - 19:15, 10 December 2015
- This means it is neither permanently backed up nor immediately operative. The device therefore must be briefly reset. More detailed information on ...723 bytes (107 words) - 17:36, 26 January 2011
- This means it is neither permanently backed up nor immediately operative. The device therefore must be briefly reset. More detailed information on ...733 bytes (107 words) - 18:50, 3 April 2007
- neither with respect to planned functionality, nor to delivery dates. Then again, the release notes contain most valuable information to our ...1 KB (170 words) - 14:27, 23 October 2023
- in your daily work, neither on the phone nor on a device (e.g. PC) connected to the phone's internal switch port. However, some switches ...1 KB (174 words) - 16:29, 16 July 2014
- of the PBX nor does it match the PBX's IP address. == Solution == #use DNS name instead of the IP address #configure this DNS name as System ...1 KB (165 words) - 16:39, 30 January 2012
- IP1200 only. It is not supported in the IP1500 nor in the IP600. The feature is implemented on IP52 (Kirk 4020) and IP54 (Kirk 4040)from firmware ...2 KB (304 words) - 15:01, 23 October 2023
- use the predefined name “admin” in this context nor the gateway admin account name defined for the gateway. SOAP functions never have a password ...2 KB (376 words) - 09:40, 28 October 2008
- timestamps (neither modification time stamps nor the archive bit are maintained for speed). ...2 KB (369 words) - 12:02, 9 March 2011
- in e.164 international format with no prefixes nor '+' at the beginning (e.g. 497031730090) ;%u: The H323-Id (SIP URI) of the user on ...2 KB (413 words) - 09:27, 24 October 2023
- destination as long as neither the source nor the destination of the call ... to this destination as long as the source nor the destination of the call ...7 KB (1,222 words) - 12:57, 23 June 2008
- timestamps (neither modification time stamps nor the archive bit are maintained for speed). == Known issues == Support:Flashdisk_(a.k.a._NAND)_Issues ...2 KB (406 words) - 11:41, 17 February 2020
- in e.164 international format with no prefixes nor '+' at the beginning (e.g. 497031730090) ;%u: The H323-Id (SIP URI) of the user on ...3 KB (460 words) - 12:59, 10 May 2023
- Neither Hicom 150 series models nor HiPath 3000 series models currently do support Cornet-NQ. We recommend to loop-in gateways into the PBX ...3 KB (377 words) - 17:30, 5 February 2008
- Also, there was no noticeable increase in delay nor packet loss. VoIP traffic was transmitted flawlessly even when the bridge was under heavy load. ...3 KB (371 words) - 08:38, 26 August 2020
- timestamps (neither modification time stamps nor the archive bit are maintained for speed). ...3 KB (454 words) - 12:15, 25 October 2016
- timestamps (neither modification time stamps nor the archive bit are maintained for speed). ...3 KB (477 words) - 16:12, 18 September 2017
- in certain scenarios, this is neither required nor desired, so here is how it works in detail: ; Release before connect - internal & external ...3 KB (517 words) - 14:37, 14 May 2013
- ;404 Not Found: The user is unknown (neither a PBX user nor a GWxx alias) ;420 Bad Extension: Unsupported extension (Require-Header) ...3 KB (407 words) - 15:29, 30 August 2018