Reference:IP1202 DECT System: Difference between revisions
Line 117: | Line 117: | ||
*Plantronics Voyager Legend | *Plantronics Voyager Legend | ||
==Training | ==Training== | ||
Revision as of 13:21, 10 December 2015
This article describes the new IP1202 DECT system, differences to the IP1200, the migration policy and provides further helpful information.
Applies To
This information applies to:
- IP1202
- IP1202e
- IP61
- IP63
It touches:
- IP1200
- IP52
- IP54
- IP55
- IP56
- IP64
Product Availability
IP-DECT base stations
The IP1202 (50-01202-001) is ready for order since April 2012.
The IP1202e (50-01202-003) with two external antenna connectors and two included dipole omni directional antennas will be ready for order in Q4/2012.
The IP1200 can be ordered until supplies run out.
The defective IP1200 devices can be repaired via RMA process until 05/2014.
IP-DECT Repeater and Antennas
The IP-DECT Repeater for IP1200 and External Antennas can be ordered until 05/2014.
IP1202e includes two dipole omni directional antennas. Directional antennas have to be ordered separately depending on the use case. Following models will be available for order soon:
- DualDirectionalAntenna (50-01202-004)
- DirectionalSingleAntenna (50-01202-005)
- OmniDirectionalSingleAntenna (50-01202-006)
DECT Handsets and Accessories
The DECT handsets IP61 (50-00061-001) and IP63 (50-00063-001) are ready for order since April 2012.
The DECT handsets IP52, IP54, IP64, IP55, IP56 can be ordered until 05/2014 (not available anymore).
For the new DECT handsets IP61 and IP63 following chargers are available:
- simple charger (50-00060-002)
- programming charger (50-00060-003)(DC4-AAAB/3B) for administration purposes (via WinPDM)
Please be aware of the fact that chargers have to be ordered separately and are not part of the handset!
Compatibility Statements
No Base Station and No Handset Compatibility
The IP1202-based IP-DECT solution is not compatible to IP1200 based IP-DECT solution.
The old DECT handset IP50, IP52, IP54, IP55, IP56 will not operate on new IP1202-based IP-DECT system, since not only GAP compliance is required, but also CAP compliance (DECT external handover CAP-N.1).
The DECT handset must support GAP and CAP for operation on IP1202 based DECT system.
The new DECT handsets IP61 and IP63 will not operate on old IP1200 based IP-DECT system.
The new DECT base stations IP1202 and IP1202e can not be used to extend an existing old IP1200 based IP-DECT system.
=> This means NO HANDOVER between different systems (move with active call on a specific handset from an IP1200-system to an IP1202-based-system or vice versa)
=> This means NO ROAMING between different systems (usage of a specific handset in a non-compatible IP-DECT system - see above)
Mixed Ascom/innovaphone Environments
It is generally not supported to mix Ascom and innovaphone DECT products in a single installation, e.g.
- Combination of IP1202/IP1202e and Ascom IPBS2 base stations is neither allowed nor supported
- Usage of IP61/IP63 with Ascom IPBS2 based networks is not supported
- Usage of non-innovaphone handsets in IP1202 based networks is not supported
- Usage of IP61/IP63 with Ascom Alarm/Messaging Server (ex:UNITE) is not supported
The one and only exception to this is use of the Ascom d81 which may be operated in an IP1202 environment.
No Multicell License Required
The Multicell License is obsolete for IP1202-based IP-DECT systems.
For IP1202-based IP-DECT systems a SARI (Secondary Access Right Identity for DECT) certificate is required. The SARI activates an IP-DECT Master based on IP1202. One single SARI certificate is required for a single IP-DECT system, regardless how many base stations are used. Also for IP-DECT systems with one single base station a SARI certificate is required. The SARI certificate is not an innovaphone license and only required to make sure the DECT Radio Fixed Part Identity used in the DECT system is worldwide unique one.
A Multicell License can not be converted to a SARI certificate (and there is also no need to do so).
Repeater and External Antennas
There are no DECT repeaters available with IP1202 based IP-DECT solution. Only IP1202-based base stations must be used.
The DECT repeaters for IP1200 are not compatible to IP1202/IP1202e.
The IP1202 has no possibility to connect external antennas.
In case external antennas are required, the IP1202e has to be used. The IP1202e has no internal antennas.
Certifications and Test Reports
The innovaphone PBX was tested and certified by Ascom Wireless Solutions with Ascom IPBS based IP-DECT System, on which IP1202 is based (but is not the same product). A Certificate and a Test Report of this certification are available for download.
Bluetooth Headset Support for IP63
The IP63 DECT handset supports handsfree and headset profiles for Bluetooth.
Following headsets are tested by the manufacturer:
- 3M Peltor WS XP
- Jabra EVOLVE 65
- Jabra MOTION
- Jabra STEALTH
- Jabra SUPREME
- Plantronics BlackBeat GO 2
- Plantronics Blackwire 710
- Plantronics M70
- Plantronics M90
- Plantronics ML20
- Plantronics Voyager Edge
- Plantronics Voyager Legend
Training
DECT Training Kit
To be able to attempt to the optional DECT Training Topic in the Advanced Training a DECT Training Kit must be ordered.
The DECT Training Kit contains:
- IP1202 x 2
- IP61
- IP63
- Charger for IP61/IP62/IP63
- USB-Programming Charger for IP61/IP63
This kit is referred to as Trainingspaket 2 (DECT) or Training Pack 2 (DECT) in the price list. Pleas note that this kit needs to present in addition to the regular training kit.
Parallel usage of IP1200 and IP1202 IP-DECT systems
The operation is only possible as two independent systems. No handover or roaming between the systems is possible. An IP1202-based system can and should synchronize the TDM clock with IP1200 based system to avoid interference.
Migration Policy For New Projects
The information in this chapter is only a suggestion which devices to use while plan new DECT projects. No mixing of old and new handsets or base stations is possible in the same project.
Handsets
DECT Handset | IP Code/Schutzart | Headset Connector | Bluetooth | Color Display | Suggested Replacement |
---|---|---|---|---|---|
innovaphone IP52 | - | - | - | - | innovaphone IP61, IP63 |
innovaphone IP54 | IP54 Dust protected, Splashing water protected | YES | - | - | innovaphone IP63 |
innovaphone IP64 | IP64 Dust tight, Splashing water protected | YES | - | - | Ascom d81 Ex |
innovaphone IP55 | - | YES | - | YES | innovaphone IP61, IP63 |
innovaphone IP56 | - | - | YES | YES | innovaphone IP63 |
innovaphone IP61 | IP40 Object size >1 mm protected | YES | - | - | |
innovaphone IP63 | IP44 Object size >1 mm protected, Splashing water protected | YES | YES | YES | |
Ascom d81 (1) | IP65 Dust tight, Water jets protected | YES | YES | YES | |
Ascom d81 Ex (1) | IP65 Dust tight, Water jets protected | YES | YES | YES |
Remark (1) - see below
d81
When operated within an IP1202 or IP1202e based environment, telephony features of d81 and d81ex are equal to the ones of the IP63.
Ascom-special telephony features as mentioned in the Ascom-d81-family-datasheet are not applicable in this use case.
Features such as man-down-alarm can be realized by upgrading the phone with a special Ascom license, documented here.
Base Stations and Repeaters
The IP1200 Base Stations and all kinds of DECT Repeaters for IP1200 are replaced by IP1202, cause no repeaters are available for the IP1202 based IP-DECT solution.
DECT System Feature Comparison
This chapter describes the differences in the feature sets between old and new DECT systems.
Feature | IP1200 based DECT system | IP1202 based DECT system | Description |
---|---|---|---|
Registration on 3rd Party IP PBX | YES | NO | IP1202 can only register on innovaphone PBX |
Messaging | YES | NO | |
Repeater | YES | NO | |
External Antennas | YES (on repeater) | YES | with IP1202e |
Non-EU DECT Frequencies | YES | NO | Required for North America, Brazil |
Number of Speech Channels per Radio | 10 | 8 | |
Max. Number of Radios | 255 | 1000000 | with multiple Mobility Masters for IP1202 |
Max. Number of Subscribed Handsets | 1500 | 1000000 | with multiple Mobility Masters for IP1202 |
Sync Master Redundancy | NO | YES | |
Distributed PBX Support with Roaming | NO | YES | In a Master Slave PBX scenario it is possible for DECT Handsets to roam between sites |
Automatic DECT Sync Configuration | NO | YES | Compared to IP1200 DECT sync, IP1202 is more reliable and stable |
GAP Compatibility | YES | YES | Although both systems are GAP compliant, innovaphone does only support innovaphone handsets used either with IP1200 or IP1202 |
CAP Compatibility | NO | YES | IP61/IP63 handsets will always do "external handover" as per CAP (DECT external handover CAP-N.1) between IP1202. GAP-only-compliant handsets will thus not work |
DECT Encryption | NO | YES | DECT Voice Traffic is encrypted between IP1202 and IP61/IP63 |
Run innovaphone PBX | YES | NO | On new IP1202 you could not run as innovaphone Master or Slave PBX. |
DECT Security | NO | YES, step B is in preparation | Step B is expected to be published during Q2 2012, see also DECT Forum |
Usage in non-EU countries
The IP1202, IP1202e, IP61 and IP63 can technically be operated in most countries of the world, as the hardware supports all relevant DECT frequencies (software configurable). However, the devices are approved in EU/EFTA states only! Use in other countries will probably be illegal thus.
Test-SARI
DECT Systems are using a worldwide unique system identification (SARI) to be separated from each other.
For test and training purposes, innovaphone offers the following SARI:
31100422072149
This SARI is intended for use in test/training systems only!
Usage within productive systems is prohibited and not recommended.
If the SARI is changed, all handsets have to be subscribed again.
DECT systems which are near to each other and are using the same test-SARI, may disturb each other.
DECT Service Codes
IP61
*#34# - Displays the Device Info *#06# - Displays the IPEI/IPDI
IP63
*#34# - Displays the Device Info *#06# - Displays the IPEI/IPDI *#77# - Site Survey Tool
Admin Menu
The handset has a hidden menu for system administrators. The Admin menu contains:
- Software and hardware information, IPEI/IPDI, and User ID
- DECT link and system information
- Site survey tool
- Fault logging
- Enhanced system menu with ability to alter protection
- Factory reset option
To activate the Admin Menu, enter the Call time screen via "Menu->Call list->Call time" and press > * < < * <
.
Known Problems
Blind Transfer
Internal ring tone after external call is blind-transferred to C, which does not save external number in call list (per IPBS design)
Firmware Compatibility
Newer IP1202 hardware (such with product code IPBS2-M3A , IPBS2-M4A or IPBS2-M5A on the back, introduced 2Q2015) need at least firmware V11r1 SR3 or V10 SR22. Older versions are not supported!
Remarks
For a succesfull registration to the PBX, it's mandatory that an entry with the user's Name as Hardware Id value exists in the Devices section of the PBX user.