Category:Faq
FAQs and other short problems can be answered in this category.
Pages in category "Faq"
The following 157 pages are in this category, out of 157 total.
A
C
- Howto:Calls from asterisk to the IP6000 with one way audio problems
- Howto:Can I import user data into the PBX from a file?
- Howto:Can I set diversions from an IP50/52/54 or an other DECT-Handset?
- Howto:Can i use a dect handset from innovaphone in several branches?
- Howto:Can I use IP800v.6 as a router with NAT/PAT? Is there a guide to configure NAT function? Thanks.
- Howto:Change the default admin password in the config file?
- Howto:Change the volume of the pickup key audio notification
- Howto:Clear a call completely with SOAP using UserClear
- Howto:Create Screenshots from innovaphone Phones LCD Displays
- Howto:Custom Object Classes with Estos Metdirectory
D
- Howto:DECT Security
- Howto:Deleting the inbound and outbound callist on an IP230
- Howto:DHSG headset specification
- Howto:DHSG pin assignment
- Howto:Diversion filter at the user object
- DND
- Howto:Do I need an exchange connetor for mrs easy setup?
- Howto:Do you have a special telephone for hearing-impaired persons?
- Howto:Do you have an Alarmserver solution (recommended product) in combination with innovaphone?
- Howto:Does Innovaphone Gateway with v.6 firmware support RFC 2833 to provide SIP DTMF relay? Thanks.
- Howto:Does innovaphone voicemail support multiple announcements?
- Howto:Does SRTP consume more bandwidth?
- Howto:Does the innovaphone IP200 support RFC 3261 aka SIP?
- Howto:Download BRIA
- Howto:DTMF and SIP
- Howto:Due to the difficulities to support ISDN Data with Cisco gateways ... Are there any experiences in connecting an IPXXX BRI Gateway via H.323 to the Cisco Call Manager?
F
G
H
- Howto:Having ECHO problems
- Howto:Hi folks, could you release a description how to make a "spontane Amtsholung" for a PBX User (e.g. a fax which can not be persuaded to dial a leading 0) cheers ! Lorenz
- Howto:Hot Desking on DECT-Phones
- Howto:Hot Desking on innovaphone IP-Phones
- Howto:How are DTMF signals treated in the media stream?
- Howto:How can I be programmatically notified for connections (like phone number x is calling phone number y) for all calls in a PBX? Also about the hangup/disconnect event of the connection between those ph
- Howto:How can i create RTTL ringtone files?
- Howto:How can i import phone numbers in the ip100 ive got a csv format file but it says it isnt a good file? Regards Wim
- Howto:How can i make an conference call with an IP110 ?
- Howto:How can I pickup calls from my colleagues? What is necessary to do first? We use the tiptel innovaphone 200 VoiceOver IP.
- Howto:How do I get my innovaphone box working with a Meridian Succession Gatekeeper vers 3.0
- Howto:How does PBX Licensing work with redundancy
- Howto:How does the telnet interface work? Do you have a command summary?
- Howto:How many space is needed to store MRS voicemails?
- Howto:How the build number scheme works
- Howto:How to activate overlap sending for IP100? Default seems to be en block.
- Howto:How to connect a standard headset to an IP230
- Howto:How to register voice messages to install the IVR function on the IP202 and IP800?
- Howto:How to run demo/trial installations of innovaphone software
- Howto:HTTP client error 401, 404, 502
I
- Howto:I used IP800 as a CPE at the customers home and Cisco AS5400 as central Gateway. If I configure T38 fax protocol on Cisco GW, the device asks me to specify ls redundancy and hs redundancy parameters.
- Howto:I want my IP200 to search the MetaDirectory also for a second business telephone number . The problem is, I dont know the name of this LDAP attribut. Any ideas?
- Howto:I would like to know if Softphone PBX is ready also in the Pocket PC version.
- Howto:I would like to make it possible for some users to , edit or mapping objects into the pbx without giveing the pbx password to the users. What way can I take. If i
- Howto:If I tie in a gateway into an existing trunk line, do calls from ISDN to ISDN consume DSP coder channels?
- Howto:If I use an IP800 like SIP registrar server, how many concurrent SIP calls can I take? Can I upgrade RAM to increase the maximum number of registrable devices? What are limits of IP800?
- Howto:In case of Master/Slave PBX - is it ok to replicate ca 200 users from master PBX to IP202 slave PBX? What is IP202 reasonalble limit for that?
- Howto:In RAS trace of my IP800 I saw "int: timeToLive = 1000". I think that this value is express in seconds. Can I modify Gatekeeper TTL value? Thanks.
- Howto:Innovaphone Support for OCS
- Howto:Innovaphones public services
- Howto:Integration of CTI in Novell Groupwise
- Howto:IP110 Drilling Template
- Howto:IP200 - is it possible to define all six of its function keys with different partners to see if they are free or calling ?
- Howto:IP55 Software Versions
- Howto:IP72 Battery, Charger Information and Headset Jack
- Howto:Is Fax supported with SIP VoIP interfaces? Thanks
- Howto:Is Integral 33 from Tenovis compatible to innovaphone gateways?
- Howto:Is it possible to change the Volume when using the innovaphone Music on Hold from the IPxxx Gateway .
- Howto:Is it possible to control call forwarding using IP100 phone?
- Howto:Is it possible to make to work group indication services (like partner and pickup list) between master and slave PBX?
- Howto:Is it possible to see time and date on IP50/52/54 terminals in IP1200 and innovaphone PBX system?
- Howto:Is it possible to start the innovaphone Softphone in minimized mode ? (or start in systray).
- Howto:Is it possible to use a innovaphone softwarephone with a Citrix Presentation server?
- Howto:Is it possible to use DECT basestations/repeaters in outdoor environment?
- Howto:Is it possible to use different ringing tones in case of multiple registrations in one IP200 phones?
- Howto:Is it possible to use the V6 Firmware with an IP400?!? Any known limitations? I wanna use the IP400 with SIP.
- Howto:Is it somehow possible to use Active/Standby PBX configuration with IP100 phones?
- Howto:Is Simple Packet Relay Transport (SPRT) Protocol for Modem over IP supported by your analog gateway/adapter?
- Howto:Is there any example code or simple scripts/programs in order to put call-information into an MySQL (or similiar) database in order to build CRM-alike solutions towards the MySQL DB?
- Howto:Is there something important to know adding DECT repeater into singe cell IP1200 system?
L
M
- Howto:Maximum entries in local phone book
- Howto:Maximum wire length
- Howto:MRS EasySetup Amtsholung field
- Howto:MSG and Pickup LED on IP240
- Howto:Multi-Party Conferencing with early IP6000
- Howto:MWI in Version 5.01 nach H.405.7 in IXI-UMS
- Howto:My customer is looking for a central solution for dynamic announcements. They shall be depending on the time of day and shall work with compressed voice (i.e. G.729).
P
R
S
- Howto:SAMwin in demo Mode even with official license
- Howto:SAMwin.innovaphone SIP Operator and SAMwin.CBC Enterprise Edition Feature Comparison
- Howto:SIP Media Negotiation - Details
- Howto:SIP resource allocation
- Howto:SIP/ISDN signaling interworking
- SIP:Alert-Info header
- SIP:from-change
- Howto:Standard Passwords on innovaphone devices
- Reference:Supported SIP Features and List of RFC's
T
- Template:Template-FAQ
- Howto:The called party is hearing sounds coming generated by windows applications (e.g. incoming email)?
- Howto:The packet sniffer (e.g. Etherreal) recognises RTP packets with a TOS value of 0 although the TOS value has been set?
- Howto:The volume of the IP10 is not loud enogh with Windows XP even though the volume control slider is set to the maximum value?
- Howto:The volume on the softphone is not loud enogh even though the volume control slider is set to the maximum value?
- Howto:Typing text on telephone keypad
U
V
W
- Howto:We are currently using Innovaphone IP6000 Gateway and couple days ago we upgraded to v6. Problem is that if I have set a diversion to my mobile it doesnt show the caller ID, just the number that call was diverted from.
- Howto:WEEE und das Deutsche ElektroG
- Howto:What Bluetooth Headsets are supported with the IP 56
- Howto:What could be wrong when IP200 doesnt show missed calls?
- Howto:What does the "DECT Gateway" in the User config stand for?
- Howto:What is "reverse powerfeeding" in the interface configuration of an IP21 good for? When should I use it?
- Howto:What is innovaphone necessary for? Why not use SKYPE, since it doesnt cost anything?
- Howto:What is ring voltage and ring frequency of IP21?
- Howto:What is the default ip address of an ip22 model?
- Howto:What is the default username/password for IP100s web interface?
- Howto:What is the difference between an IP1200 and a Kirk Wireless Server 600/3
- Howto:What is the impedance of the analogue interfaces of IP21? Can we connect more than one terminal (in paralel) to these ports?
- Howto:What is the maximum cable length from IP 21 to the fax
- Howto:What is the maximum lenght of the cable connection between a IP21 and an analog device?
- Howto:What is the maximum number of subscription on a single IP1200?
- Howto:What is the power draw (in Watts) of the telephones IP230, IP200 and IP110 using PoE?
- Howto:What is the time to live value used by IP800 in the H.323 gatekeeper registration?
- Howto:What type of 802.3af does the ip200 and ip100 support because there are two types of 802.3af- power over the unused pairs and power over the used pairs regards thomas
- Howto:When do you need a Gatekeeper License
- Howto:When using a pass-through fax connection, on Cisco GWs a packetization period is reduced from 20 ms to 10 ms. Can I change packetization value to 10 ms on an IP800, too?
- Howto:Where can I find the latest firmware for my innovaphone device?
- Howto:Where is the Autostart option of the Softphone executed in Windows. In the Registry and in the Autostart folder is no entry for this Setting. I need this to modify the LINK
- Howto:Where to find SNMP MIB for innovaphone gateways
- Howto:Wherefor could the BRI Interface on the IP6000 be used?
- Howto:Which platforms are supported by the SoftwarePhone?
- Howto:Which PoE switches Innovaphone reccomends or what parameters should be considered choosing the PoE switch?
- Howto:Which ports are used for PPTP connections?
- Howto:Which soundcards are supported?
- Howto:Which USB telephony keypads are supported?
- Howto:Why does Kirk recommend to not use the radio in an IP1200 Master?
- Howto:Why does the Gateway fail to route an incoming SIP call?
- Howto:Why is the phonebook converter on the innovaphone website no longer available?