Category:Faq: Difference between revisions
Jump to navigation
Jump to search
(previous page) (next page)
(New page: FAQs and other short problems can be answered in this category.) |
(No difference)
|
Latest revision as of 10:17, 20 April 2007
FAQs and other short problems can be answered in this category.
Pages in category "Faq"
The following 200 pages are in this category, out of 205 total.
(previous page) (next page)A
- Howto:A while ago i found a publication by Innovaphone called Understanding and Selling IP Telephony. Is it possible to access this doc online?
- Howto:AVIRA virus scanner blocks Syslog and Trace
- Howto:Are 'Call Accept keys' supported for Bluetooth headsets?
- Howto:Are there any known problems with Asterisk drivers in OpenH323 gateways?
- Howto:Are there headsets recommended for the IP200 or Software Phone?
- Howto:Are there special IP21 analogue telephone adapters for Switzerland?
- Howto:Avoid "lazy" registrations when using different nodes
C
- Howto:CE-Declarations
- Howto:CTI for Apple Mac OS and Innovaphone
- Howto:Calls from asterisk to the IP6000 with one way audio problems
- Howto:Can I configure an IP secondary on ethernet interface of my IP800 gateways? If It is possible, can I configure different 802.1Q VLAN id to primary IP and secondary IP (like CISCO sub interfaces)?
- Howto:Can I import user data into the PBX from a file?
- Howto:Can I set ISDN bearer capability (speech or 3.1kHz) on my IP800 GW with v6.00 firmware?
- Howto:Can I set diversions from an IP50/52/54 or an other DECT-Handset?
- Howto:Can I use IP800v.6 as a router with NAT/PAT? Is there a guide to configure NAT function? Thanks.
- Howto:Can I use just any HTTP server to stream PBX announcements to the waiting queue, or does it have to be IIS?
- Howto:Can IP800 gateway support RADIUS protocol?
- Howto:Can IP800 with v.6 firmware support MGCP protocol?
- Howto:Can i add a route to a specific ISDN channel?
- Howto:Can i configure time based routes in v5?
- Howto:Can i use a dect handset from innovaphone in several branches?
- Howto:Can innovaphone be integrated with Lotus Sametime?
- Howto:Can the analog adapters IP21 (and coming new products) send CLI information to analog device?
- Howto:Can the firmware 6 with the SIP protocol be uploaded to every IP200 or is there a limitation on the hardware?
- Howto:Can your phone show you a wrong missed call, ie the person hasnt called you but a missed call is shown on phone.
- Howto:Change the default admin password in the config file?
- Howto:Change the volume of the pickup key audio notification
- Howto:Clear a call completely with SOAP using UserClear
- Howto:Create Screenshots from innovaphone Phones LCD Displays
- Howto:Custom Object Classes with Estos Metdirectory
D
- Howto:DECT Security
- Howto:DECT solution using CallManager
- Howto:DHSG headset specification
- Howto:DHSG pin assignment
- DND
- Howto:Do you recommend any optical signalling devices for people with impaired hearing?
- Howto:DTMF and SIP
- Howto:Deleting the inbound and outbound callist on an IP230
- Howto:Diversion filter at the user object
- Howto:Do I need an exchange connetor for mrs easy setup?
- Howto:Do you have a Windows CE and windows mobile (5) version of your softphone client?
- Howto:Do you have a special telephone for hearing-impaired persons?
- Howto:Do you have an Alarmserver solution (recommended product) in combination with innovaphone?
- Howto:Does Innovaphone Gateway with v.6 firmware support RFC 2833 to provide SIP DTMF relay? Thanks.
- Howto:Does SRTP consume more bandwidth?
- Howto:Does innovaphone voicemail support multiple announcements?
- Howto:Does the innovaphone IP200 support RFC 3261 aka SIP?
- Howto:Download BRIA
- Howto:Due to the difficulities to support ISDN Data with Cisco gateways ... Are there any experiences in connecting an IPXXX BRI Gateway via H.323 to the Cisco Call Manager?
F
G
H
- Howto:How can i create RTTL ringtone files?
- HTTP client error 401, 404, 502
- Howto:Having ECHO problems
- Howto:Hi folks, could you release a description how to make a "spontane Amtsholung" for a PBX User (e.g. a fax which can not be persuaded to dial a leading 0) cheers ! Lorenz
- Howto:Hot Desking on DECT-Phones
- Howto:Hot Desking on innovaphone IP-Phones
- Howto:How are DTMF signals treated in the media stream?
- Howto:How can I access unreleased soft- and firmware (a.k.a. hotfixes)?
- Howto:How can I be programmatically notified for connections (like phone number x is calling phone number y) for all calls in a PBX? Also about the hangup/disconnect event of the connection between those ph
- Howto:How can I explicitly cancel a certain call in the gateway that is indicated via Gateway/Calls or PBX/Calls menu?
- Howto:How can I find application which converts promts and music files to the needed format like g729, g711 etc?
- Howto:How can I pickup calls from my colleagues? What is necessary to do first? We use the tiptel innovaphone 200 VoiceOver IP.
- Howto:How can i import phone numbers in the ip100 ive got a csv format file but it says it isnt a good file? Regards Wim
- Howto:How can i make an conference call with an IP110 ?
- Howto:How do I get my innovaphone box working with a Meridian Succession Gatekeeper vers 3.0
- Howto:How does PBX Licensing work with redundancy
- Howto:How does the telnet interface work? Do you have a command summary?
- Howto:How many km are possible with an analog adapter
- Howto:How many space is needed to store MRS voicemails?
- Howto:How the build number scheme works
- Howto:How to activate overlap sending for IP100? Default seems to be en block.
- Howto:How to connect a standard headset to an IP230
- Howto:How to register a V6 IP200 with a V6 PBX via SIP
- Howto:How to register voice messages to install the IVR function on the IP202 and IP800?
- Howto:How to run demo/trial installations of innovaphone software
I
- Howto:I am currently working with ANT engineer and they have problem that they can not adjust the db(voice level) on IP21. How we can adjust the level.
- Howto:I am hearing a gap in an audio stream when i minimize or maximize a window?
- Howto:I can see articles titles in my RSS reader, but I receive an error when I try to follow the link to the article
- Howto:I deal since some weeks with an ISDN provider about this thing called CLIP no screening, because I like to see the caller ID if I have set a diversion to my mobile. What is CLIP no screening?
- Howto:I have a IP-202 that seemed to fail during firmware . Red lamp is on, notheing else. I have been told that GWload should help. But in the description, it tels you to start with a "long reset". There
- Howto:I have a problem with a ip21 and a fax. It can receive incoming fax but not send any. I think the problem is the dialing.
- Howto:I have provisioned 2 ip230s from you. I cannot find the default login information in your documentation.
- Howto:I have the following problem according the Pickup list. When there is several ongoing active calls you can see them in the pickup list, but if one call is transferred to a GSM phone it disappears
- Howto:I have the phones IP202, IP 200 and IP100. How can I start a Phonebook Server? I hab seen this funktion on the Web Interface of IP100.
- Howto:I use IXI-Call Version 2.02.0024 Can I download Hotfixes or newer releases of this Software anywhere? Or how can I get hotfixes at all?
- Howto:I used IP800 as a CPE at the customers home and Cisco AS5400 as central Gateway. If I configure T38 fax protocol on Cisco GW, the device asks me to specify ls redundancy and hs redundancy parameters.
- Howto:I want my IP200 to search the MetaDirectory also for a second business telephone number . The problem is, I dont know the name of this LDAP attribut. Any ideas?
- Howto:I want to program some "short numbers" in my ip800 (ex : 8000 calls 0032479445656). Im sure the routing table isnt the only place were i can do this ?
- Howto:I want to send log information from internal calls. I now how to read logs, but how i get these internal calls send information to log?
- Howto:I would like to know if Softphone PBX is ready also in the Pocket PC version.
- Howto:I would like to make it possible for some users to , edit or mapping objects into the pbx without giveing the pbx password to the users. What way can I take. If i
- Howto:Innovaphones public services
- Howto:IP110 Drilling Template
- Howto:IP200 - is it possible to define all six of its function keys with different partners to see if they are free or calling ?
- Howto:IP55 Software Versions
- Howto:IP72 Battery, Charger Information and Headset Jack
- Howto:If I tie in a gateway into an existing trunk line, do calls from ISDN to ISDN consume DSP coder channels?
- Howto:If I use an IP800 like SIP registrar server, how many concurrent SIP calls can I take? Can I upgrade RAM to increase the maximum number of registrable devices? What are limits of IP800?
- Howto:In RAS trace of my IP800 I saw "int: timeToLive = 1000". I think that this value is express in seconds. Can I modify Gatekeeper TTL value? Thanks.
- Howto:In case of Master/Slave PBX - is it ok to replicate ca 200 users from master PBX to IP202 slave PBX? What is IP202 reasonalble limit for that?
- Howto:In which way can I a route with a timeout value? In V5 firmware there is a timeout field but in V6 I dont find It. Thanks.
- Howto:Innovaphone Support for OCS
- Howto:Integration of CTI in Novell Groupwise
- Howto:Is Fax supported with SIP VoIP interfaces? Thanks
- Howto:Is Integral 33 from Tenovis compatible to innovaphone gateways?
- Howto:Is Simple Packet Relay Transport (SPRT) Protocol for Modem over IP supported by your analog gateway/adapter?
- Howto:Is innovaphone compatible with Skype?
- Howto:Is it possible to change the Volume when using the innovaphone Music on Hold from the IPxxx Gateway .
- Howto:Is it possible to control call forwarding using IP100 phone?
- Howto:Is it possible to make to work group indication services (like partner and pickup list) between master and slave PBX?
- Howto:Is it possible to see time and date on IP50/52/54 terminals in IP1200 and innovaphone PBX system?
- Howto:Is it possible to start the innovaphone Softphone in minimized mode ? (or start in systray).
- Howto:Is it possible to use DECT basestations/repeaters in outdoor environment?
- Howto:Is it possible to use a innovaphone softwarephone with a Citrix Presentation server?
- Howto:Is it possible to use different ringing tones in case of multiple registrations in one IP200 phones?
- Howto:Is it possible to use the V6 Firmware with an IP400?!? Any known limitations? I wanna use the IP400 with SIP.
- Howto:Is it possible with Innovaphone PBX to make "bigger" conference than just 3 party call?
- Howto:Is it somehow possible to use Active/Standby PBX configuration with IP100 phones?
- Howto:Is there any Tool available to maintain a LDAP Database?
- Howto:Is there any example code or simple scripts/programs in order to put call-information into an MySQL (or similiar) database in order to build CRM-alike solutions towards the MySQL DB?
- Howto:Is there something important to know adding DECT repeater into singe cell IP1200 system?
- Howto:Is totalrecall voice recording compatible with innovaphone?
- Howto:It is possible to connect a external device like outlook, and use other CTI devices with TAPI protocol. This I know is possible with standard H.323 devices from your own product portfolio.
L
M
- Howto:MRS EasySetup Amtsholung field
- Howto:MSG and Pickup LED on IP240
- Howto:MWI in Version 5.01 nach H.405.7 in IXI-UMS
- Howto:Maximum entries in local phone book
- Howto:Maximum wire length
- Howto:Multi-Party Conferencing with early IP6000
- Howto:My customer is looking for a central solution for dynamic announcements. They shall be depending on the time of day and shall work with compressed voice (i.e. G.729).
P
R
- Howto:RJ11 telephone jack pin assignement for the IP21 in Switzerland
- Howto:Register IP100 phone on the PBX using HW-ID like IP200?
- Howto:Remove Corrupted Licenses of innovaphoneCompanion, innovaphoneBackup and innovaphoneReport
- Howto:Reporting - Log Messages
- Howto:Retrieve PBX User Info from a Web Application
S
- Howto:SAMwin in demo Mode even with official license
- Howto:SAMwin.innovaphone SIP Operator and SAMwin.CBC Enterprise Edition Feature Comparison
- Howto:SIP Media Negotiation - Details
- Howto:SIP resource allocation
- Howto:SIP/ISDN signaling interworking
- SIP:Alert-Info header
- SIP:from-change
- Howto:Standard Passwords on innovaphone devices
- Reference:Supported SIP Features and List of RFC's
T
- Template:Template-FAQ
- Howto:The called party is hearing sounds coming generated by windows applications (e.g. incoming email)?
- Howto:The packet sniffer (e.g. Etherreal) recognises RTP packets with a TOS value of 0 although the TOS value has been set?
- Howto:The volume of the IP10 is not loud enogh with Windows XP even though the volume control slider is set to the maximum value?
- Howto:The volume on the softphone is not loud enogh even though the volume control slider is set to the maximum value?
- Howto:Typing text on telephone keypad
U
V
W
- Howto:WEEE und das Deutsche ElektroG
- Howto:We are currently using Innovaphone IP6000 Gateway and couple days ago we upgraded to v6. Problem is that if I have set a diversion to my mobile it doesnt show the caller ID, just the number that call was diverted from.
- Howto:What Bluetooth Headsets are supported with the IP 56
- Howto:What could be wrong when IP200 doesnt show missed calls?
- Howto:What does the "DECT Gateway" in the User config stand for?
- Howto:What is "reverse powerfeeding" in the interface configuration of an IP21 good for? When should I use it?
- Howto:What is innovaphone necessary for? Why not use SKYPE, since it doesnt cost anything?
- Howto:What is ring voltage and ring frequency of IP21?
- Howto:What is the default ip address of an ip22 model?
- Howto:What is the default username/password for IP100s web interface?
- Howto:What is the difference between an IP1200 and a Kirk Wireless Server 600/3
- Howto:What is the impedance of the analogue interfaces of IP21? Can we connect more than one terminal (in paralel) to these ports?
- Howto:What is the maximum cable length from IP 21 to the fax
- Howto:What is the maximum lenght of the cable connection between a IP21 and an analog device?
- Howto:What is the maximum number of subscription on a single IP1200?
- Howto:What is the power draw (in Watts) of the telephones IP230, IP200 and IP110 using PoE?
- Howto:What is the time to live value used by IP800 in the H.323 gatekeeper registration?
- Howto:What type of 802.3af does the ip200 and ip100 support because there are two types of 802.3af- power over the unused pairs and power over the used pairs regards thomas
- Howto:When do you need a Gatekeeper License
- Howto:When using a pass-through fax connection, on Cisco GWs a packetization period is reduced from 20 ms to 10 ms. Can I change packetization value to 10 ms on an IP800, too?
- Howto:Where can I find the latest firmware for my innovaphone device?
- Howto:Where is the Autostart option of the Softphone executed in Windows. In the Registry and in the Autostart folder is no entry for this Setting. I need this to modify the LINK
- Howto:Where to find SNMP MIB for innovaphone gateways
- Howto:Wherefor could the BRI Interface on the IP6000 be used?
- Howto:Which PoE switches Innovaphone reccomends or what parameters should be considered choosing the PoE switch?
- Howto:Which USB telephony keypads are supported?
- Howto:Which platforms are supported by the SoftwarePhone?
- Howto:Which ports are used for PPTP connections?