Search results
Jump to navigation
Jump to search
Google site results
Loading...
Wiki results
Page title matches
- #REDIRECT Howto:How to use Admin function in PBX-API ...56 bytes (9 words) - 17:05, 19 July 2007
- Basic parameters for the Administration access of the device are configured here. == Device Name == The name of the device. This name is displayed ...3 KB (468 words) - 11:38, 4 May 2022
- Additional to the default DES encryption the admin can enable RC4 and AES. ... The Kerberos admin service for joining and leaving realms is located using: ...4 KB (655 words) - 11:38, 4 May 2022
- Additional to the default DES encryption the admin can enable RC4 and AES. ... The Kerberos admin service for joining and leaving realms is located using: ...5 KB (860 words) - 11:39, 4 May 2022
- Additional to the default DES encryption the admin can enable RC4 and AES. ... The Kerberos admin service for joining and leaving realms is located using: ...5 KB (878 words) - 12:40, 5 February 2024
- The Kerberos admin service for joining and leaving realms is located using: _kpasswd._udp.REALM (e.g. _kpasswd._udp.example.com) == Debugging == ...5 KB (843 words) - 12:40, 5 February 2024
- Basic parameters for the Administration access of the device are configured here. == Device Name == The name of the device. This name is displayed ...1 KB (198 words) - 12:45, 16 June 2021
- #REDIRECT Reference13r1:General/Admin ...41 bytes (5 words) - 13:02, 18 October 2021
- Basic parameters for the Administration access of the device are configured here. == Device Name == The name of the device. This name is displayed ...3 KB (427 words) - 14:46, 16 June 2021
- Additional admin accounts. These are either "normal" administrator or viewer accounts. A viewer account can see everything but cannot ...1 KB (222 words) - 12:19, 4 February 2010
- There are various ways to accomplish this, one of it is using the ... The SOAP interface and thus the SOAP API's Admin is available ...14 KB (2,076 words) - 12:30, 10 May 2023
- private static final String ADMSOAPUSER = "admin"; //PBX ... ADMSOAPUSERPWD = "ip311"; //PBX admin password ...7 KB (795 words) - 20:05, 11 June 2018
- Sometimes you have to upload config file to device where admin password was changed. This will fail cause wrong vars check bf80684dc2b64f8f at ...1 KB (179 words) - 15:57, 21 February 2008
- If you need to set the admin account and password using the command line (e.g. in an update script), you can use the config add /user account ...2 KB (250 words) - 10:10, 17 December 2019
- #REDIRECT Howto:The PBX SOAP Admin function ...47 bytes (7 words) - 20:37, 30 January 2008
- #REDIRECT Howto:Change the default admin password in the config file? ...73 bytes (11 words) - 15:58, 18 September 2007
Page text matches
- (0x01000000) // hide serial/mac from admin->information screen #define PHONE_HIDE_MM_ADMIN_STRICT (0x08000000) // hide admin ...1 KB (167 words) - 10:53, 8 January 2015
- name. These include Alarms, Apps, AP, Calendar Admin, Call List, CallListApi, Config Admin, Config User, Contacts Admin, ContactsApi, Events, Fax ...797 bytes (116 words) - 09:55, 14 August 2019
- User login: admin Password: ip200 ===Gateway example=== ... user login:admin Password ip3000 ===IP100=== The only exception is ...936 bytes (126 words) - 13:26, 31 August 2007
- Only the Main Admin account has access via Telnet, no other Admin accounts supported. ...380 bytes (61 words) - 09:55, 25 November 2009
- Sometimes you have to upload config file to device where admin password was changed. This will fail cause wrong vars check bf80684dc2b64f8f at ...1 KB (179 words) - 15:57, 21 February 2008
- #REDIRECT Reference13r1:General/Admin ...41 bytes (5 words) - 13:02, 18 October 2021
- These include Alarms, Apps, AP, Calendar Admin, Call List, CallListApi, ... quot;,"dn":"Admin","digest": ...1 KB (169 words) - 08:49, 21 August 2019
- #REDIRECT Howto:The PBX SOAP Admin function ...47 bytes (7 words) - 20:37, 30 January 2008
- #REDIRECT Howto:How to use Admin function in PBX-API ...56 bytes (9 words) - 17:05, 19 July 2007
- user: admin pw: type name. So for your IP230, the credential is admin/ip230 (all lower case) ...523 bytes (84 words) - 18:47, 18 June 2007
- #REDIRECT Howto:Change the default admin password in the config file? ...73 bytes (11 words) - 15:58, 18 September 2007
- If you need to set the admin account and password using the command line (e.g. in an update script), you can use the config add /user account ...2 KB (250 words) - 10:10, 17 December 2019
- At first we need to restore the PBX. Therefore we need to change the admin password of the device to its original state. Go to Advanced Admin ...2 KB (348 words) - 14:21, 10 November 2023
- config change PHONE ADMIN-UI /hide-mask Depending on the user interface ... | PHONE_HIDE_ADMIN_INFO_MAC ||0x01000000 || hide serial/mac from ...4 KB (510 words) - 10:16, 3 September 2018
- config change PHONE ADMIN-UI /hide-mask Currently the following functions ... 0x01000000 -- hide serial/mac from admin->info screen ...3 KB (381 words) - 10:16, 3 September 2018
- current configuration, you would use the Admin() function with an XML argument of ... You don't need to use Admin() each time you receive an UserInfo ...2 KB (257 words) - 10:19, 27 September 2011
- This is an App, where the admin can see the events and alarms data ... This is an App, where the admin can see the current alarms data. Different ...1 KB (216 words) - 18:05, 18 November 2022
- This is an App, where the admin can see the events and alarms data ... This is an App, where the admin can see the current alarms data. Different ...1 KB (244 words) - 18:05, 18 November 2022
- config change PHONE ADMIN-UI /hide-mask Depending on the user interface ... | PHONE_HIDE_ADMIN_INFO_MAC ||0x01000000 || hide serial/mac from ...5 KB (649 words) - 10:16, 3 September 2018
- set of function keys is availabe thru the advanced admin UI. ... here. For all settings the advanced admin UI hast to be used. ...985 bytes (157 words) - 10:59, 8 November 2022
- config change PHONE ADMIN-UI /hide-mask Depending on the user interface ... | PHONE_HIDE_ADMIN_INFO_MAC ||0x01000000 || hide serial/mac from ...5 KB (677 words) - 10:16, 3 September 2018
- The SOAP API function Admin can be used to list all PBX Objects and ... echo ($inno->Admin($show->asXML())); //get XML data of the each ...3 KB (477 words) - 13:03, 10 May 2023
- has to be indentical to master's admin password. See figure Media:PBX ... === Admin Group RIP / Viewer Group RID === These settings are used ...3 KB (419 words) - 10:14, 24 June 2010
- It is possible to factory reset a handset from its Admin menu. # To activate the Admin Menu, enter the Call time screen and press > * . ...1 KB (183 words) - 16:03, 23 March 2017
- the PBX SOAP API can do this by virtue of the "Admin()" function. There has been some discussion of this topic in the innovaphone ice ...383 bytes (66 words) - 17:22, 7 May 2007
- has to be indentical to master's admin password. See figure Media:PBX ... === Admin Group RIP / Viewer Group RID === These settings are used ...3 KB (431 words) - 13:51, 28 April 2011
- ** user: Admin user name from the Kerberos server ** password: Admin password from the Kerberos server ** disable-local: ...3 KB (434 words) - 16:03, 26 April 2013
- * The standard user name admin and * The standard user password ipxxx ... chapter entitled "Configuration/General/Admin")! ...2 KB (350 words) - 12:32, 22 April 2008
- ;PBX Password: If the checkmark is set, the PBX admin password is ... ;PBX Password: If the checkmark is set, the PBX admin password is ...1 KB (233 words) - 15:04, 19 November 2012
- create a second App PBX object for Connect Admin. The object must be named ... ===Distribute the admin mode of connect === If you want to allow administrators ...4 KB (728 words) - 14:32, 19 March 2024
- All Admin Accounts can have access via Telnet. Viewer accounts do not have access, also Kerberos Accounts do not have access (as the Password ...469 bytes (76 words) - 09:53, 25 November 2009
- All Admin Accounts can have access via Telnet. Viewer accounts do not have access, also Kerberos Accounts do not have access (as the Password ...469 bytes (76 words) - 14:35, 26 January 2011
- * The standard user name admin and * The standard user password ipxxx ... chapter entitled "Configuration/General/Admin")! ...2 KB (377 words) - 20:00, 8 December 2009
- ===Start a bat file with admin rights=== It is necessary to start the ... To start an recorder.bat file with admin rights a little trick must ...3 KB (533 words) - 18:15, 9 August 2016
- * Admin account for Azure Portal (only necessary for granting needed ... if not possible you have to ask an admin [[Image:APIPermission_Connector_fo ...9 KB (1,376 words) - 17:34, 3 January 2024
- User) to start/stop time tracking and an admin app (Working Manager) to ... (=submitted) to be displayed on the admin app. Once they are confirmed ...6 KB (933 words) - 15:18, 30 October 2023
- ;Admin: gives access to the PbxAdminApi, needed to get data from the ... === Users Admin App (innovaphone-usersadmin) === This is the administation ...3 KB (532 words) - 17:54, 18 November 2022
- * assign the new created App to your admin user * login as admin user and open new AppStore * click on the refresh ...2 KB (282 words) - 11:55, 26 July 2022
- User) to start/stop time tracking and an admin app (Working Manager) to ... (=submitted) to be displayed on the admin app. Once they are confirmed ...6 KB (1,034 words) - 13:39, 4 March 2024
- * finalising the set-up of admin devices (central Devices App, Revers ... Domain: admin.cloud.de DNS PBX: admin-pbx.cloud.de DNS AP: admin-apps ...5 KB (805 words) - 14:19, 10 November 2023
- Read Reference:Configuration/General/Admin#Help_URL in order to understand ... Reference:Configuration/General/Admin [[Category:Howto|]] ...2 KB (326 words) - 09:49, 9 November 2023
- //ADMIN/mod_cmd_login.xml?argument1=value1&argument2=value2&... ... 192.168.0.1/PBX0/ADMIN/mod_cmd_login.xml?cmd=submit-object&cn ...5 KB (823 words) - 14:20, 20 June 2014
- login as: admin Copyright (c) 2002 - 2009 Trapeze Networks, Inc. All ... Username: admin Password: *trapeze-inno> enable Enter password: ...2 KB (254 words) - 19:02, 4 December 2009
- === Admin Group RIP / Viewer Group RID === These settings are used if use domain group is selected. You can specify a RID of a Windows group of ...3 KB (460 words) - 20:20, 16 April 2013
- === Admin Group RIP / Viewer Group RID === These settings are used if use domain group is selected. You can specify a RID of a Windows group of ...3 KB (460 words) - 12:19, 26 October 2010
- === Admin Group RIP / Viewer Group RID === These settings are used if use domain group is selected. You can specify a RID of a Windows group of ...3 KB (460 words) - 17:24, 2 March 2016
- This article describes approaches to recover devices with lost admin password. ==Applies To== This information applies to: *IP3000, boot 320 ...4 KB (663 words) - 17:58, 13 March 2023
- in chapter "Configuration/General/Admin". If no product name (Device Name) was configured, the standard name of the device is used ...2 KB (350 words) - 16:52, 23 October 2023
- objects. They can be read by using the admin interface of the PBX (e.g ... DO NOT CHANGE THE PASSWORD OF THE VOICEMAIL OBJECT IN THE ADMIN INTERFACE ...2 KB (315 words) - 16:03, 24 February 2022
- in chapter "Configuration/General/Admin". If no product name (Device Name) was configured, the standard name of the device is used ...2 KB (366 words) - 09:45, 14 May 2012
- in chapter "Configuration/General/Admin". If no product name (Device Name) was configured, the standard name of the device is used ...2 KB (380 words) - 16:11, 21 February 2012
- in chapter "Configuration/General/Admin". If no product name (Device Name) was configured, the standard name of the device is used ...2 KB (380 words) - 16:17, 3 January 2012
- (h323=pbx-admin) (pbx=) === Encrypting the new User Password === ... // convert admin key hex string to binary $binkey = pack('H*& ...11 KB (1,538 words) - 13:02, 10 May 2023
- === Recordings Admin App (innovaphone-recordingsadmin) === ... Admin version of the app allow you to: * Access to all records ...8 KB (1,177 words) - 18:02, 18 November 2022
- * Howto:Using the SOAP Admin Function * Howto:Authentication in the SOAP API interface * Howto:SOAP API PHP5 Sample Code [[Category:Faq|]] ...740 bytes (125 words) - 19:07, 8 May 2009
- in chapter "Configuration/General/Admin". If no product name (Device Name) was configured, the standard name of the device is used ...2 KB (391 words) - 10:21, 14 July 2010
- for external calls. In the byon LineSelect Admin App, multiple lines with ... * Admin ==Licensing== To access the full range of functions, licences ...4 KB (716 words) - 10:14, 7 May 2024
- # use the gateways admin user name and its password. This will give ... # use the user name “admin” along with the PBX password. This ...2 KB (376 words) - 09:40, 28 October 2008
- in chapter "Configuration/General/Admin". The following buttons are available: == Info == Shows some usefull infos, e.g. the available ...2 KB (369 words) - 12:02, 9 March 2011
- Open devices in your admin PBX (adminpbx.cloud.com). Add Customer Domain ... all devices" than it will be used as admin password as well. ...4 KB (667 words) - 14:19, 10 November 2023
- * The admin user who performs configuration and provisioning must ... ===Create a Hot Desk Base User - Users Admin app=== Open your Users ...7 KB (1,172 words) - 14:58, 6 November 2023
- This article provides an example script used to download a trap trace in a short time after device reboot. ==Applies To== This information applies to ...3 KB (491 words) - 14:46, 16 February 2012
- * perform the change you need to effect using the admin UI ... 20130312-142901 CMD admin@172.16.68.130 mod cmd PHONE/USER-UI reg ...7 KB (1,109 words) - 12:53, 10 May 2023
- external callers. Also the app provides an admin defined history of activated ... Object for the users and the App Object for the admin) ==Versions== ...4 KB (659 words) - 10:00, 10 April 2024
- ==Summary== This article provides information about export of PBX users data to a CSV file for using it in 3rd-party applications without XML ...4 KB (597 words) - 13:03, 10 May 2023
- * As an admin, you can add iFrame instances according to the number ... To configure the app open the admin app of this app. There you can ...9 KB (1,423 words) - 09:06, 6 May 2024
- private static final String ADMSOAPUSER = "admin"; //PBX ... ADMSOAPUSERPWD = "ip311"; //PBX admin password ...7 KB (795 words) - 20:05, 11 June 2018
- will be encrypted as if the devices admin user and password had been reset to defaults before. This allows to upload the configuration to another ...900 bytes (140 words) - 13:18, 4 July 2014
- object for "User" and one for "Admin". ... **Select the admin template and give him the admin-app permission ...7 KB (1,144 words) - 09:15, 5 July 2023
- Configure user within FritzBox-admin-menu as shown below. ... to your browser and login with userid "admin" and password "ipxxx ...2 KB (322 words) - 09:48, 14 February 2023
- : type of the app object, either User or Admin ; DELETION : Select if users on this object should be able to delete a recording directly or move ...722 bytes (118 words) - 13:43, 12 December 2023
- in chapter "Configuration/General/Admin". == Usage == The following buttons are available: === Info === Shows some usefull infos, e ...2 KB (406 words) - 11:41, 17 February 2020
- * Same admin/pass combination on all PBXes ==More Information== ... 'username' => 'admin', 'password& ...2 KB (360 words) - 15:57, 24 October 2023
- ** Inform admin UID and PWD ** Inform one PBX User UID and PWD ... * Create a new Admin Account * Copy and secure the emergency passwords ...3 KB (479 words) - 16:21, 15 November 2023
- * Key management: The encryption key is derived from the admin password ... from the device with the standard admin password. * Bit strength: - ...5 KB (796 words) - 16:37, 13 July 2016
- : type of the app object, either User or Admin ; DELETION : Select if users on this object should be able to delete a recording directly, move ...763 bytes (125 words) - 13:43, 12 December 2023
- ===Start a bat file with admin rights=== It could be necessary to start ... To start an iQM.bat file with admin rights a little trick must be ...5 KB (853 words) - 12:20, 18 May 2015
- ===Phone Control admin app=== * set pbx name ==Licensing== ... With the Phone Control admin app you can configure the app. ...8 KB (1,217 words) - 14:27, 22 October 2023
- in chapter "Configuration/General/Admin". = Supported card sizes = The firmware supports CF cards up to 128GB. Greater cards can be ...3 KB (454 words) - 12:15, 25 October 2016
- === Recordings Admin App (innovaphone-recordingsadmin) === ... Admin version of the app allow you to : * Access to all records ...9 KB (1,353 words) - 18:02, 18 November 2022
- * User The admin user name for the Linux Web Server * Password The admin password for the Linux Web Server = Access = ...3 KB (442 words) - 16:04, 20 February 2013
- object for "User" and one for "Admin". ... **Select the admin template and give him the admin-app permission ...7 KB (1,110 words) - 11:36, 1 December 2023
- * User The admin user of the device which hosts the myPBX service * Password The admin password of the device which hosts the myPBX service ...3 KB (447 words) - 17:22, 8 February 2016
- * Users Admin App * MAC address of the Yealink Device (usually on the ... ;Admin: to be able to edit the device on the User object ...9 KB (1,585 words) - 09:22, 4 December 2023
- private static final String ADMSOAPUSER = "admin"; //PBX ... ADMSOAPUSERPWD = "ip311"; //PBX admin password ...13 KB (1,258 words) - 09:06, 9 May 2018
- in chapter "Configuration/General/Admin". = Supported card sizes = The firmware supports SSDs up to 128 GB. Greater SSDs can be also ...3 KB (477 words) - 16:12, 18 September 2017
- **You need to add an object for "User" and one for "Admin ... choose what type this object will be. (User, or admin) ***Delete mode: ...10 KB (1,587 words) - 09:45, 19 February 2024
- The hotdesk app admin decide which of these three possibilities will ... mac-address and the desk-/computername the admin has to upload a csv file ...10 KB (1,570 words) - 09:06, 6 May 2024
- Admin version of the app allow you to: * Access to all records ... * Assign recordingsadmin App to authorized (admin) users, which will ...9 KB (1,371 words) - 09:30, 25 April 2024
- * Contacts Admin App (innovaphone-contacts-admin) ** Features a menu ... login as: admin Using keyboard-interactive authentication. ...13 KB (1,790 words) - 18:06, 18 November 2022
- === Recordings Admin App (innovaphone-recordingsadmin) === ... Admin version of the app allow you to: * Access to all records ...10 KB (1,568 words) - 11:32, 10 October 2023
- The Sendnumber admin app allows admins to assign and remove phone ... ===SendNumber - Admin App=== With Sendnumber Admin App, the outgoing ...8 KB (1,121 words) - 12:20, 24 April 2024
- ===Admin Area=== Select a PBX where you want to connect to. Choose ... license please install the app and in the admin area of the app you will ...9 KB (1,402 words) - 12:37, 19 February 2024
- ;Admin: gives access to the PbxAdminApi, needed to get data from the ... === Users Admin App (innovaphone-usersadmin) === This is the administation ...11 KB (1,645 words) - 13:00, 10 May 2023
- Favorite Contacts admin app: * set pbx name ==Licensing== ... With the Favorite Contacts admin app you can configure the app. ...8 KB (1,217 words) - 09:05, 6 May 2024
- Maintenance of the phone book now requires admin rights in the PBX ... * Set Long Name and Name and to the desired name (e.g. telbook-admin) ...6 KB (987 words) - 20:07, 3 January 2020
- ;Admin: to be able to edit the User object to monitor or un-monitor ... === Switchboard Admin App (innovaphone-switchboard-admin) === ...11 KB (1,745 words) - 19:28, 3 April 2023
- ;Admin: to be able to edit the User object to monitor or un-monitor ... === Switchboard Admin App (innovaphone-switchboard-admin) === ...12 KB (2,028 words) - 14:28, 3 May 2024
- Matthias Diehl admin-squad UG Abdennour Ettabib Teleseminar bvba Terry Samain, WestSys BVBA Kurt Ninaus Comm-Unity EDV Martin Falkner eSYS Informationssysteme ...1 KB (164 words) - 17:21, 12 February 2015
- === Admin UI for access rights === The styling of the admin UI will be updated, but most important at ...8 KB (1,367 words) - 16:54, 13 February 2024
- Object for the users and the App Object for the admin) ==Versions== ... Install the App and add the App Object for user and admin. The steps ...6 KB (934 words) - 09:08, 6 May 2024
- using the Profile App. For that the admin only needs to configure steps (1.) and (2.). ==Details== === Favorites === The user can add up to 32 ...1 KB (164 words) - 12:34, 21 July 2023
- ; Type Contacts Admin : Add app instance with e.g. import menu option ; Type Contacts APIs : Adds hidden app instance servicing the API innovaphone ...1 KB (187 words) - 11:02, 26 October 2021
- Object for the users and the App Object for the admin) ==Versions== ... If installing the app and adding the user/admin object for the first time ...8 KB (1,179 words) - 09:03, 6 May 2024
- There are various ways to accomplish this, one of it is using the ... The SOAP interface and thus the SOAP API's Admin is available ...14 KB (2,076 words) - 12:30, 10 May 2023
- see this app in there app list. But the admin has to assign this app to ... license please install the app and in the admin area of the app you will ...15 KB (2,410 words) - 09:04, 6 May 2024
- inherit their settings through the Config Admin template to be able to monitor ... App to the Apps section of the Config Admin Template. image:set-up ...4 KB (586 words) - 09:31, 5 July 2023
- * User The admin user of the device which hosts the myPBX service * Password The admin password of the device which hosts the myPBX service ...4 KB (580 words) - 20:53, 6 March 2017
- 1 x ISDN BRI interface in TE and NT mode, for routing, admin, synchronizing, backup or other ===Hardware=== Digital Signal Processor (DSP) for ...1 KB (167 words) - 17:27, 12 January 2023
- * User The admin user of the device which hosts the myPBX service * Password The admin password of the device which hosts the myPBX service ...4 KB (591 words) - 14:47, 23 May 2018
- Additional admin accounts. These are either "normal" administrator or viewer accounts. A viewer account can see everything but cannot ...1 KB (222 words) - 12:19, 4 February 2010
- To bypass the wizard, you can access directly to the admin interface ... == http://x.x.x.x/admin.htm == V7 - V8 == http://x.x.x.x/administrator.htm ...2 KB (294 words) - 11:01, 22 April 2022
- Additional to the default DES encryption the admin can enable RC4 and AES. ... The Kerberos admin service for joining and leaving realms is located using: ...4 KB (655 words) - 11:38, 4 May 2022
- === Calendar Admin App (innovaphone-calendar-admin) === (Still experimental) Gives some administrative options and can be used to get the current ...11 KB (1,623 words) - 18:00, 18 November 2022
- 1 x ISDN BRI interface in TE and NT mode, for routing, admin, synchronizing, backup or other ===Hardware=== Digital Signal Processor (DSP) for ...1 KB (177 words) - 17:34, 12 January 2023
- === Admin app === File:QueueBoard-adminAppIcon.png For configuration ... In Queue Board 1.0: If the Queue Board Admin has set the "Wrapup ...14 KB (2,161 words) - 09:10, 6 May 2024
- 1 x ISDN interface in TE and NT mode, for routing, admin, synchronizing, backup or other ===Hardware=== Power supply: Power over Ethernet according ...1 KB (181 words) - 16:48, 12 January 2023
- #** Admin UI > PBX > Config > General #*** Nothing may be ... #**** Admin UI > IP4 > General > STUN > TURN Server ...4 KB (659 words) - 18:26, 6 March 2024
- === Step 2 - SMTP settings for Users Admin App === [[Image: 2-mailadr-users-admin.jpg|thumb|upright=1.0|right|Part 2, Step 2]] ...10 KB (1,433 words) - 19:32, 14 November 2023
- * AdminPIN.txt: code to acces the whitelist admin menu * Language.txt: ... should dial 80**80 to access the White List admin menu. ...4 KB (691 words) - 14:36, 23 August 2021
- === Calendar Admin App (innovaphone-calendar-admin) === (Still experimental) Gives some administrative options and can be used to get the current ...11 KB (1,748 words) - 11:24, 27 February 2024
- * User The admin user of the device which hosts the myPBX service * Password The admin password of the device which hosts the myPBX service ...5 KB (709 words) - 08:53, 29 June 2021
- Default login is: admin / admin Image:3_en50.jpg DHCP or change to ... Login with username and password (default : admin / admin) ...7 KB (1,051 words) - 12:16, 27 September 2022
- wUyLM2JTbZWFTXlUW3JMaT Switchboard Admin App] * [https://www.youtube.com/watch?v=d-SQ4lsWais&list=PLsHQOzBKYeZwUyLM2JTbZWFTXlUW3JMaT Fax App] ...6 KB (868 words) - 15:33, 26 September 2022
- an App and adding the App Object for the users and admin) ... * Admin: Presence Favorites now has an admin area. You need to add ...9 KB (1,312 words) - 09:08, 6 May 2024
- === Contacts Admin App (innovaphone-contacts-admin) === ... and select either if the user should have admin-rights or not. Now click ...23 KB (3,327 words) - 10:45, 29 February 2024
- Configuration of the clients is done using the General/Admin page ... Local user: admin Remote user: REALM\username or username@REALM ...11 KB (1,694 words) - 14:47, 25 August 2014
- * you need to know the admin username & password of the system ... SSD card and authenticate yourself with the admin username and password. ...4 KB (693 words) - 18:07, 1 August 2023
- numbers. This can be configured by an admin at the user or by the App: ... === Admin App === [[Image:analytics_icon_admin.png|100px]] ...14 KB (2,203 words) - 09:02, 6 May 2024
- | Account || The gateways admin account name ( For 3rd party installations ... In this case, you may either use the PBX admin account as “Account” ...10 KB (1,519 words) - 10:18, 30 November 2012
- 2. Admin app where you could configure how to react to a specific ... presence state to the configured one in the admin app. If the user didn´t ...15 KB (2,419 words) - 09:09, 6 May 2024
- User : admin Password : ip72 Proceed with WLAN configuration in browser. ... usbload config /login user,pass (default:ip72,admin) /ssid ...5 KB (622 words) - 10:26, 24 August 2010
- 1 x S0-interface: ISDN BRI-aansluiting voor routing, admin, synchronisatie, backup e.d., TE- of NT-mode ===Hardware=== Digitale signaalprocessor ...2 KB (188 words) - 11:54, 3 May 2021
- of the unit. Call list can be deleted via phone admin menu * Dect IP-Phone: Call list can be deleted via phone admin menu. Via ...17 KB (2,670 words) - 10:35, 22 February 2022
- * Install the app and add a admin object to access the configuration area. ... license please install the app and in the admin area of the app you will ...17 KB (2,675 words) - 09:07, 6 May 2024
- 1 x S0-Schnittstelle: ISDN BRI-Anschluss für Routing, Admin, Synchronisation, Backup o.ä. TE- oder NT-Modus ===Hardware=== Digitaler Signalprozessor ...2 KB (206 words) - 11:53, 3 May 2021
- $httpu, // the HTTP user id (e.g. "admin") $httpp, // the ... | $httpu || the admin account of the box running the innovaphone PBX ...19 KB (2,849 words) - 15:42, 23 August 2023
- In this Zipfile, there's a tool called CCFP Admin. ... with the serial cable to the IP1500, and start CCFP Admin. ...4 KB (705 words) - 11:59, 25 March 2011
- * Admin * RccApi * PbxSignal ==Licensing== * one service license per ... File:Effexx-cbm-admin-rr-01.png ====Add a Waiting Queue without Callback ...12 KB (1,869 words) - 09:05, 23 April 2024
- 1 x S0-Schnittstelle: ISDN-Anschluss für Routing, Admin, Synchronisation, Backup o.ä. TE- oder NT-Modus 2 x Ethernet: RJ 45 Schnittstelle 10/100 ...2 KB (182 words) - 12:17, 11 January 2023
- Configuration of the clients is done using the General/Admin page ... * Local user: admin * Remote user: REALM\username or username@REALM ...10 KB (1,612 words) - 17:05, 12 August 2013
- 1 x interface T0 : connexion RNIS T0 pour Routing, Admin, Synchronisation, Backup ou similaire, mode TE ou NT ===Hardware=== Processeur numérique ...2 KB (220 words) - 11:54, 3 May 2021
- Additional to the default DES encryption the admin can enable RC4 and AES. ... The Kerberos admin service for joining and leaving realms is located using: ...5 KB (860 words) - 11:39, 4 May 2022
- Additional to the default DES encryption the admin can enable RC4 and AES. ... The Kerberos admin service for joining and leaving realms is located using: ...5 KB (878 words) - 12:40, 5 February 2024
- ===Admin user=== Admin user for login the PBX (for example “admin”) ===Admin Password=== ...17 KB (3,028 words) - 14:23, 4 May 2022
- 1 x Interfaccia S0: collegamento ISDN BRI per Routing, Admin, Sincronizzazione, Backup o altro, in modalità TE o NT ===Hardware=== ...2 KB (217 words) - 11:54, 3 May 2021
- all myApps clients. This can be done in the admin UI on page PBX/Config/myApps ... It can be activated during installation of the PBX or in the admin ...15 KB (2,448 words) - 10:36, 9 November 2022
- also possible remotely via the Devices App, Admin UI of the Phone. ... Open the Phones Admin UI, Maintenance, Diagnostic, Tracing and tick ...5 KB (903 words) - 14:19, 10 November 2023
- long as (1.) and (2.) are already configured by the admin. ==Details== === Favorites === The user can add up to 32 phone numbers or SIP URIs as ...2 KB (319 words) - 14:57, 5 May 2022
- 1 x S0-Schnittstelle: ISDN BRI-Anschluss für Routing, Admin, Synchronisation, Backup o.ä. TE- oder NT-Modus 2 x Ethernet: RJ 45 Schnittstelle ...2 KB (223 words) - 12:20, 11 January 2023
- then open the User and and afterwards the Admin object and confirm with ... see next section) and adding the user and admin object, we have to perform ...17 KB (2,593 words) - 09:11, 6 May 2024
- property, seperated by ~, for example myapp~admin~debug). ... ;Admin: Create/Update/Delete Users and other PBX config itemss ...6 KB (1,120 words) - 17:46, 14 September 2023
- Go to Users Admin App and select New Phone registration. Make a hot-desking-registration for the users you want to share a phone. Go to advanced ...2 KB (322 words) - 17:16, 13 July 2023
- Object inside the PBX to the same value as your admin password of the AP-Platform. If no password is configured the PBX Password will be used ...2 KB (314 words) - 17:41, 18 December 2023
- have to login to the Azure Portal with an admin user to be able to add an ... Azure Portal homepage] and sign in with your admin user ...10 KB (1,539 words) - 14:21, 10 November 2023
- Object inside the PBX to the same value as your admin password of the AP-Platform. If no password is configured the PBX Password will be used ...2 KB (314 words) - 17:41, 18 December 2023
- a "doorbell" and a "doorbell admin" app. The doorbell admin ... license please install the app and in the admin area of the app you will ...11 KB (1,772 words) - 09:04, 6 May 2024
- As an admin, create the environment settings in the Gigaset Provisioning ... the IP address of the integrator, the admin password and select the ...16 KB (2,552 words) - 13:02, 8 February 2024
- How to add this license to the app object of the ESENTA admin app: ... Image:How_to_install_widgets_visibility-PBX-Admin.png ===ESENTA SIAS ...11 KB (1,721 words) - 10:01, 18 March 2024
- to the Phone App of the respective user. As admin you define which data should ... new version, a Pbx must be selected in the admin area. Close the Admin app ...20 KB (3,222 words) - 09:04, 6 May 2024
- * Web/Webdav: admin/linux * Root-Login (e.g. with Putty): root/iplinux ... minutes too). The default credentials are admin/linux for both platforms. ...22 KB (3,392 words) - 10:35, 3 May 2023
- If no password is set, the admin password of the gateway is automatically used: * AP object * AP Manager (former Apps) object * just in cloud ...3 KB (464 words) - 15:31, 19 March 2020
- you need to install the System with a DOMAIN ADMIN Account. (recommendation: Copy the build-in Administrator and change the password to "never ...3 KB (428 words) - 17:54, 2 May 2007
- During INSTALL, the default passwords are replaced with the global ... * SSH-Login with admin and ipapps * root login with root and iplinux ...26 KB (4,308 words) - 20:08, 26 March 2024
- Object inside the PBX to the same value as your admin password of the AP-Platform. If no password is configured the PBX Password will be used ...3 KB (392 words) - 17:41, 18 December 2023
- Within admin-ui at gateway level (Gateway/Interfaces) different types of conference interfaces may be shown depending on used device type: ...3 KB (411 words) - 17:49, 9 December 2020
- the advanced UI directly via https://ip/admin.xml?xsl=admin.xsl to deactivate ... Here you enter the credential of the existing admin user (this user ...32 KB (5,300 words) - 16:46, 4 March 2024
- all myApps clients. This can be done in the admin UI on page PBX/Config/myApps ... It can be activated during installation of the PBX or in the admin ...21 KB (3,293 words) - 10:36, 9 November 2022
- *Create a voicemail object via the PBXManager or the PBX admin UI. Use the default voicemail script. *Step to the base station / DECT / Config ...3 KB (446 words) - 12:10, 21 July 2022
- all myApps clients. This can be done in the admin UI on page PBX/Config/myApps ... It can be activated during installation of the PBX or in the admin ...21 KB (3,394 words) - 19:18, 29 November 2022
- * Assign App to authorized (admin) users, which will be allowed to ... * Grant access to APIs: "PbxSignal" (mandatory), "Admin ...12 KB (1,875 words) - 19:22, 20 March 2024
- Admin App: * camera profile configuration with name, MJPEG url and ... For a valid license please install the app and in the admin area of ...7 KB (1,119 words) - 09:01, 6 May 2024
- ; Email address of the admin account : Email address for test email = Two-factor authentication = ; Enable two-factor authentication ...3 KB (426 words) - 12:21, 17 May 2019
- 2. Log into command interface (default login : admin,ip72) usbload.exe interactive 3. config change PHONE FORMS /state-information ...3 KB (383 words) - 13:27, 27 May 2010
- PBX user is only possible if the PBX user has full admin rights ;Port: As default port 80 is used for HTTP. With this field it can be changed ...3 KB (543 words) - 10:07, 6 September 2013
- all myApps clients. This can be done in the admin UI on page PBX/Config/myApps ... It can be activated during installation of the PBX or in the admin ...23 KB (3,693 words) - 14:54, 28 November 2023
- all myApps clients. This can be done in the admin UI on page PBX/Config/myApps ... It can be activated during installation of the PBX or in the admin ...24 KB (3,854 words) - 12:06, 10 May 2024
- During INSTALL, the default passwords are replaced with the global ... * SSH-Login with admin and ipapps * root login with root and iplinux ...35 KB (5,737 words) - 16:01, 19 September 2023
- config file, you will need to remember the admin password of the device being ... Although the devices admin account can be used for that, it is better ...9 KB (1,355 words) - 13:03, 30 November 2010
- quot;vm-group"/General/E-Mail. It is up to an admin of the receiving mail server for how to distribute the email towards all potential group members. ...4 KB (576 words) - 13:48, 5 September 2023
- http://baudisch.dyndns.org/jpg/image.jpg?refresh=1 (user admin password 1234, doesn't seem to be required though) http://baudisch.dyndns ...4 KB (621 words) - 15:45, 6 November 2018
- * log in to the LAP's admin UI (if you have not yet changed it ... Forwards only access right or the admin user of the box) ...15 KB (2,374 words) - 10:17, 17 July 2023
- 2. byon WhoIsOn Admin 3. byon WhoIsOn Adminlog Image:WhoIsOn PBX 1.png 1. Image:WhoIsOn PBX 2.png 2. Image:WhoIsOn PBX 3.png 3. Image:WhoIsOn PBX 4.png ...4 KB (660 words) - 09:02, 9 May 2023
- To get the steps done, log in to your PBX as admin. Open "AP Manager ... After you have logged in to your PBX as admin, click on "AP Manager ...9 KB (1,434 words) - 10:30, 6 March 2024
- users long name and PBX password) or as the admin user (using the gateway administrator ... purposes also. This is done via the Admin call. ====string Admin(string ...26 KB (4,159 words) - 12:59, 13 December 2012
- used credentials in your setup, for example your admin credentials. Confirming “Share” you will now note that the directory symbol has an ...4 KB (798 words) - 14:21, 10 November 2023
- Default login is admin/swphone. The configuration options are the same ... The default credentials are admin / swphone == [Tab: „User Configuration ...17 KB (2,517 words) - 18:07, 16 February 2016
- Config UI: http://172.16.0.49 (admin, kws300 default) Observations (MAC on label) -> account (default): admin/kws300. Looks as if the ...18 KB (2,694 words) - 15:05, 23 August 2012
- Default login is admin/swphone. The configuration options are the same ... The default credentials are admin / swphone == [Tab: „User Configuration ...17 KB (2,526 words) - 11:23, 22 June 2016
- Configure a device name (general/admin) as on the IP1200 master. Ldap configuration on the secondary IP1200. image:How_to_configure_IP1200_Dect11x.PNG ...6 KB (974 words) - 17:50, 1 June 2007
- users long name and PBX password) or as the admin user (using the gateway administrator ... purposes also. This is done via the Admin call. ====string Admin(string ...28 KB (4,424 words) - 21:16, 8 June 2018
- and available on the Home Screen of the created admin-user. ==Troubleshooting== The browser console contains all API messages sent from or to ...5 KB (746 words) - 10:43, 10 April 2024
- If admin wish to deploy one default buddylist for all PBX Users in ... the dedicated phones of users with the admin password. Only temporary ...15 KB (2,478 words) - 11:23, 25 July 2013
- or you must start the application as admin (right mouse click on the ... Before despair check also the correct admin and password, remember ...15 KB (2,517 words) - 11:09, 24 August 2020
- work-route, control-route, admin-route: 8.03 CSTA-Adapter: 2.24.0.0 SOAP to CSTA Converter: 1.93.0.1 ACHAT Server: 8.0.2 X-CAPI: 3.3.36.0 ...4 KB (634 words) - 11:28, 29 June 2010
- Default login is admin/swphone. The configuration options are the same ... The default credentials are admin / swphone == „Application, Audio ...18 KB (2,658 words) - 12:19, 30 October 2018
- • Advanced UI admin access || / |- | H.323 (tcp/1300) • optionally H.323 (tcp/1720) if you need plaintext • needed if you want to offer ...6 KB (992 words) - 09:52, 19 October 2023
- Step to the admin-ui Gateway/SIP configuration page to define a new unregistered UDP SIP trunk. In general, you have 16 SIP trunks available, ...5 KB (750 words) - 16:36, 29 September 2020
- The Kerberos admin service for joining and leaving realms is located using: _kpasswd._udp.REALM (e.g. _kpasswd._udp.example.com) == Debugging == ...5 KB (843 words) - 12:40, 5 February 2024
- During INSTALL, the default passwords are replaced with the global ... * SSH-Login with admin and ipapps * root login with root and iplinux ...46 KB (7,500 words) - 15:58, 22 February 2024
- * In General -> Admin, add a user with Administrator rights image:InnoStatsAddUser.png * In PBX -> Config -> General, tick the option ...4 KB (665 words) - 15:55, 30 August 2022
- users long name and PBX password) or as the admin user (using the gateway administrator ... purposes also. This is done via the Admin call. ====string Admin(string ...29 KB (4,647 words) - 12:59, 13 December 2012
- The PBX Manager Plugin for the Calendar App allows you to create to kinds of app objects. One is the Calendar Admin, which is just a simple overview ...6 KB (1,026 words) - 18:34, 13 May 2022
- users long name and PBX password) or as the admin user (using the gateway administrator ... purposes also. This is done via the Admin call. ====string Admin(string ...31 KB (5,043 words) - 14:37, 27 April 2016
- “c:\myRecorder\” and require therefore admin rights. ... rights. To start a batch file with admin rights a little trick must ...12 KB (2,052 words) - 11:09, 17 July 2017
- ;Admin: Create/Update/Delete Users and other PBX config itemss ;PbxApi: User level access to the PBX, with functions like presence monitoring ...6 KB (985 words) - 10:44, 21 December 2020
- During INSTALL, the default passwords are replaced with the global ... * SSH-Login with admin and ipapps * root login with root and iplinux ...48 KB (7,932 words) - 11:52, 8 May 2024
- During INSTALL, the default passwords are replaced with the global ... * SSH-Login with admin and ipapps * root login with root and iplinux ...48 KB (7,911 words) - 15:47, 6 March 2024
- ;COMMAND(3): device was reset using the admin ui or update script (no trap) == Related Articles == *Reference9:Maintenance/Diagnostics/Tracing ...5 KB (593 words) - 08:40, 13 April 2022
- You can use the local Admin menu on the Phone or the WinPDM Software ... the default login credentials Username: admin and Password: changeme ...12 KB (1,520 words) - 15:10, 19 December 2023
- * that has ticked devices-api and users-admin in the Apps tab ... "name": "users-admin", "title": "Users ...41 KB (5,669 words) - 11:46, 10 July 2023
- users long name and PBX password) or as the admin user (using the gateway administrator ... purposes also. This is done via the Admin call. All kinds of PBX objects ...36 KB (5,784 words) - 13:29, 17 April 2024
- As a result, when migrating your PBX from V7 to V8 the PBX-admin must decide whether the v7-phone-configs are to be discarded or not. The step ...5 KB (898 words) - 09:00, 10 April 2015
- *The administrator in the admin UI under Reference13r3:PBX/Objects ... **In the admin under Reference12r2:General/Certificates, you should ...13 KB (2,129 words) - 12:00, 22 December 2023
- You can use the local Admin menu on the Phone or the WinPDM Software ... flags directly in the phone configuration (Admin Menu :: Logging :: Mode) ...15 KB (2,120 words) - 12:10, 4 April 2024
- or provisioned through the Profile/Users Admin App will get a random password ... password somewhere else (e.g. under General::Admin), this password ...23 KB (3,425 words) - 11:06, 11 July 2023
- The PBX Manager Plugin for the Calendar App allows you to create to kinds of app objects. One is the Calendar Admin, which is just a simple overview ...7 KB (1,198 words) - 17:02, 12 May 2021
- If the iQM Admin falg is active some iQM settings can be done: image:IQM103.PNG ==Views== The Dashboard has a resolution of 800 x 600 Pixel ...6 KB (989 words) - 16:25, 2 February 2022
- a valid license please install the app and in the admin area of the app you will find the authentication key. Please send us this authentication key ...6 KB (971 words) - 09:11, 6 May 2024
- ;Admin: Create/Update/Delete Users and other PBX config itemss ;PbxApi: User level access to the PBX, with functions like presence monitoring ...8 KB (1,305 words) - 14:08, 31 October 2022
- ====Project Move (admin only)==== A company admin can move a project with its devices, activation keys ...49 KB (8,229 words) - 15:47, 15 April 2024
- rights. Therefor the PC must run with admin credentials or at least the ... supervision. Like in other applications admin access and SOAP user is required. ...30 KB (5,041 words) - 08:48, 4 September 2019
- * Shortcut to access the Admin UI of the phone ( button on the top right) == Licensing == Per user configured to use the myPhoneKeys-App an & ...6 KB (887 words) - 10:40, 29 November 2023
- * Admin UI appearance: Gateway Channels * Order Number: 01-00500-004 === IPVA === An IPVA provides a software based conference interface only ...7 KB (1,053 words) - 20:43, 20 December 2022
- creatorsName: uid=admin,ou=administrators,ou=topologymanagement,o ... modifiersName: uid=admin,ou=administrators,ou=topologymanagement,o ...23 KB (3,702 words) - 18:55, 30 May 2016
- Screen; The Default Login Credentials: User Name:admin; Password: 1234 Image:Niosta-IP39-4x_Image_3.png *b) Network Parameters Configuration screen ...7 KB (1,080 words) - 15:26, 29 September 2015
- or provisioned through the Profile/Users Admin App will get a random password ... password somewhere else (e.g. under General::Admin), this password ...25 KB (3,741 words) - 21:34, 5 December 2023
- write rights to the own directory (typically admin rights). ... Frame "iQM admin ===Work as iQM Admin=== If checked on top of ...30 KB (5,273 words) - 14:53, 5 December 2022
- * log in to the LAP's admin UI (if you have not yet changed it, the default credentials will be admin/linux, see Concept Linux Application ...19 KB (2,973 words) - 19:34, 22 March 2017
- long as (1.) and (2.) are already configured by the admin. === Standard App, Wake and Push mechanism === myApps client allows to define a default ...8 KB (1,055 words) - 09:50, 29 February 2024
- a valid license please install the app and in the admin area of the app you will find the authentication key. Please send us this authentication key ...7 KB (1,116 words) - 09:03, 6 May 2024
- ==Admin Menu== The handset has a hidden menu for system administrators. The Admin ...26 KB (3,933 words) - 15:45, 27 February 2024
- or provisioned through the Profile/Users Admin App will get a random password ... password somewhere else (e.g. under General::Admin), this password ...26 KB (3,911 words) - 12:55, 22 January 2024
- ** Data Handler: PBX0/ADMIN/mod_cmd_login.xml? ** Data Format: cmd ... ** Data Handler: PBX0/ADMIN/pbx_makecall.txt? ** Data Format: cn=/ ...18 KB (2,664 words) - 08:57, 13 September 2023
- Default login is admin/swphone. The configuration options are the same ... The default credentials are admin / swphone == „Audio and USB Configuration ...27 KB (4,145 words) - 10:49, 28 March 2023
- Login: Admin - Advance Mode Menu: Voice-> Line 1 and PSTN Line ====Line1==== Proxy and Registration Line1: SIP Port 5061 Line1: Proxy and Registration: ...6 KB (886 words) - 09:55, 24 July 2015
- The PBX Manager Plugin for the Calendar App allows you to create two kinds of app objects. One is the Calendar Admin, which is just a simple ...9 KB (1,482 words) - 11:00, 9 October 2023
- Admin REST API Allows you to retrieve one or more PBX objects of a specific type. Optionally look for an object with a specific name. PBX objects ...6 KB (994 words) - 14:00, 15 December 2023
- password somewhere else (e.g. under General::Admin), this password ... domain password, you will be logged in as admin and have access to all domains. ...21 KB (3,050 words) - 17:58, 18 November 2022
- step, you have to activate the "Admin" option at the "ContactsApi ... search-APIs to the Config-User and/or Config-Admin template. ...14 KB (2,244 words) - 14:18, 10 November 2023
- * Web/Webdav: admin/linux * Root-Login (e.g. with Putty): root/iplinux ... minutes too). The default credentials are admin/linux for both platforms. ...49 KB (7,426 words) - 10:26, 3 May 2023
- * Admin passwords : Admin user authentication is based on Keberos. Each admin thus ...61 KB (9,540 words) - 09:01, 10 July 2017
- password somewhere else (e.g. under General::Admin), this password ... domain password, you will be logged in as admin and have access to all domains. ...22 KB (3,229 words) - 13:47, 13 July 2021
- like “c:\myiQM\” and require therefore admin rights. From a client point of view there is no difference between having the service or normal ...8 KB (1,466 words) - 09:15, 10 August 2018
- * in the object's App tab, the 'Admin' and 'PbxApi ... ** access your PBX using the URL https://your-pbx-ip-address/admin ...32 KB (4,650 words) - 11:11, 10 July 2023
- the default website by means of the IIS Admin. Allow read, write and browse ... You must enable WebDAV from within the IIS Admin first. Files with the extension ...29 KB (4,349 words) - 15:29, 12 March 2024
- * Multilevel admin access (detailed multilevel user rights for the ... * Multiple system admin (multiple admin and viewer rights possible ...18 KB (2,467 words) - 16:52, 2 August 2023
- config file, you will need to remember the admin password of the device being ... at the HTTP layer. Although the devices admin account can be used for that ...56 KB (8,292 words) - 15:07, 27 November 2023
- Config Admin). Image:K-Businesscom-PBX-Designer-template_access_1.png to be used by all users with the Config Admin template, by clicking on the 9- ...24 KB (3,674 words) - 10:17, 26 April 2024
- The admin can change that behaviour at the configuration of the registration or interface. There the key exchange mechanisms (SDES, DTLS-SRTP ...10 KB (1,508 words) - 14:11, 17 May 2022
- Note: Please consult your firewall vendor or system admin if you need help to configure this. ==== Use innovaphone's Reverse Proxy ==== ...11 KB (1,611 words) - 14:07, 10 November 2023
- The admin can change that behaviour at the configuration of the registration or interface. There the key exchange mechanisms (SDES, DTLS-SRTP ...10 KB (1,522 words) - 11:34, 2 March 2020
- Multilevel Admin Access (Detaillierte mehrstufige Rechte-Vergabe zur ... Multiple System Admin (Mehrere Viewer und Mehrere Admins , Viewer ...18 KB (2,268 words) - 11:57, 16 June 2016
- Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network ...10 KB (1,472 words) - 11:50, 25 August 2020
- ::Image:How_to_install_widgets_visibility-PBX-Admin.png == WebRTC license on the PBX (only needed if Firmware ;add js files to your ...11 KB (1,505 words) - 11:51, 21 February 2020
- User name: admin Password: mypbx == Configuration via e-mail == ... - Set the same admin password and restore the configuration via WEB ...20 KB (3,283 words) - 15:49, 27 January 2023
- * log in to the LAP's admin UI (if you have not yet changed it ... ** /mtls/update/admin ** /mtls/update/fw/ (note the trailing slash!) ...95 KB (14,649 words) - 15:46, 19 February 2024
- Device has no apparent method of tracing in the device admin UI. However, there is a syslog and debug server mechanism {| border="1" ...9 KB (1,398 words) - 12:16, 30 July 2012
- The admin has already assigned both apps (Connector for kuando® and ... Options to activate: Hidden, Websocket, Admin, PbxApi Example for App ...25 KB (3,782 words) - 11:09, 19 April 2024
- The admin has already assigned both apps (Connector for kuando® and ... Options to activate: Hidden, Websocket, Admin, PbxApi Example for App ...25 KB (3,788 words) - 11:14, 19 April 2024
- and “Password” is intended as the Admin access to the PBX while the “Query User” is just a dummy user on which the SOAP is working (typically ...10 KB (1,681 words) - 10:24, 23 August 2021
- Is used in combination with the innovaphone Admin API to synchronize users with Azure Active Directory. ===Collecting Call Data Records (CDRs)=== ...9 KB (1,451 words) - 11:42, 19 March 2024
- Initial login is « admin » ; initial password « xenios ». === innovaphone PBX === It is mandatory to disable the digest auth detection. to ...8 KB (1,260 words) - 15:32, 15 July 2021
- show that users, anyway it is confusing for an admin. ==Following myPBX== If a myPBX is installed on that PC (installed version, not web-based ...12 KB (2,228 words) - 17:08, 12 October 2020
- ::Image:How_to_install_widgets_visibility-PBX-Admin.png == WebRTC-Lizenz auf der PBX (Nur wenn Firmware hinzu ;Füge die js Dateien im hinzu ...12 KB (1,522 words) - 11:51, 21 February 2020
- innovaphone has to add the systemname/domain manual in the Push Admin and create a secret password and send this to the customer. The Customer ...12 KB (1,926 words) - 17:48, 5 February 2024
- The admin can assign one or more base filters to the user. A base ... least one base filter condition, which the admin has defined. ...29 KB (4,299 words) - 10:36, 3 May 2023
- b. The factory account password of the telephone is admin/admin. Then you can enter the Phone Configuration Interface 1.Login to phone web portal: ...26 KB (4,267 words) - 09:24, 16 January 2024
- *System Admin Client (configuration of teams / queues / services, workplaces, agents, states, codes, and other) ==Version== * Authensis Version 13 ...10 KB (1,416 words) - 09:46, 19 April 2024
- PBX Long Name (cn) or The ID from the "Users Admin" App. ===== Since Version 13r3sr4 ===== Since Service Release 4 of the Connector ...14 KB (2,151 words) - 15:40, 12 March 2024
- and is accessible from the Config Admin template. === With the PBX ... with output[match[1]] = {cmd: 'PBX0/ADMIN/mod_cmd_login.xml?cmd=show ...35 KB (5,103 words) - 11:20, 21 March 2024
- Roaming\ can be accessed for write operations with admin rights only. ** Solution: start iqm as administrator. ==Related Articles== ...14 KB (2,486 words) - 09:01, 9 October 2018
- search-APIs to the Config-User and/or Config-Admin template. === NTLM/OAuth=== 13r3 introduces OAuth2 Windows Authentication for myApps. If your ...28 KB (4,411 words) - 08:14, 25 April 2024
- the iQM Main window or if a client works as an iQM admin clicking on the relative button. ====Setup==== In the iQM Server setup the flag “Outbound” ...15 KB (2,673 words) - 14:46, 14 June 2023
- |Not for Admin access on the Web-page, probably as HTTP-client to retrieve firmware/configuration from remote servers |---- |Device supports VAD ...15 KB (2,364 words) - 14:49, 30 November 2022
- The admin can assign one or more base filters to the user. A base ... least one base filter condition, which the admin has defined. ...36 KB (5,440 words) - 10:17, 3 May 2023
- and informations for analysing the IP62 in the admin menu. You can reach the menu by entering the Settings menu and type in “40022” on the keypad. ...16 KB (2,419 words) - 15:09, 19 December 2023
- will login to the PBX for the SOAP functions, admin user and password is required. The iQM detect his own IP-address, this is important because ...18 KB (3,190 words) - 10:22, 13 October 2023
- To do this, a new connector must be created in the Exchange Admin Center under Message Flow Connectors (+). ====Connector with CA Trusted Certificate ...16 KB (2,508 words) - 17:32, 6 July 2022
- User name: admin Password: mypbx == Configuration via e-mail == Since 12r1 sr 8 and 12r2 beta 4 configuration commands can be passed to the app ...14 KB (2,352 words) - 14:50, 23 October 2023
- User name: admin Password: mypbx == Configuration via e-mail == Since 12r1 sr 8 and 12r2 beta 4 configuration commands can be passed to the app ...14 KB (2,398 words) - 17:11, 29 November 2023
- web server using a browser: http://PBX_IP/admin.xml?xsl=admin.xsl ... 1.2 (single line panel) and enter the user admin and default password 123456 ...16 KB (2,608 words) - 16:22, 11 January 2024
- under "Configuration/General/Admin/Device Name" with space-, control- and punctuation characters except '-' replaced by ...19 KB (3,110 words) - 11:05, 13 August 2018
- on a iQM client if configured as dashboard an iQM admin. The following picture shows the large ans small iQM server display and the dashboard view, please ...37 KB (6,350 words) - 14:53, 13 January 2022
- user: admin password: **** $ Activate WLAN trace: config add WLANMGR0 /xtrace config change ASCDEBUG0 /enable supp /enable wlan config write ...14 KB (1,619 words) - 10:57, 12 May 2010
- under "Configuration/General/Admin/Device Name" with space-, control- and punctuation characters except '-' replaced by ...20 KB (3,276 words) - 11:06, 13 August 2018
- under "Configuration/General/Admin/Device Name" with space-, control- and punctuation characters except '-' replaced by ...21 KB (3,348 words) - 11:06, 13 August 2018
- under "Configuration/General/Admin/Device Name" with space-, control- and punctuation characters except '-' replaced by ...23 KB (3,712 words) - 14:22, 28 May 2019
- at the individual user objects. The admin can do that in the "Access" dialog. Templates can be used to configure rights at many user ...22 KB (3,629 words) - 15:58, 13 December 2018
- under "Configuration/General/Admin/Device Name" with space-, control- and punctuation characters except '-' replaced by ...24 KB (3,919 words) - 15:26, 27 April 2022
- at the individual user objects. The admin can do that in the "Access" dialog. Templates can be used to configure rights at many user ...24 KB (3,746 words) - 15:59, 13 December 2018
- File URL in Services/Update (either using the admin UI or with config change UP1 or the script shown above). This mechanism is now used for #Discovering ...24 KB (3,617 words) - 21:05, 5 February 2024
- at the individual user objects. The admin can do that in the "Access" dialog. Templates can be used to configure rights at many user ...24 KB (3,823 words) - 15:59, 13 December 2018
- *user: admin *password: ipva ===Do I Always Need To Download The Entire IPVA?=== No, after the 1st-time deployment of an entire IPVA only the ...20 KB (3,089 words) - 10:41, 3 May 2023
- ==Product name== Snom [https://service.snom.com/display/wiki/Desk+Phones VoIP Deskphones] ==Certification Status== manufacturername=Snom Technology ...24 KB (3,564 words) - 15:47, 29 February 2024
- at the individual user objects. The admin can do that in the "Access" dialog. Templates can be used to configure rights at many user ...31 KB (4,811 words) - 12:10, 27 March 2024
- *user: admin *password: ipva ===Do I Always Need To Download The Entire IPVA?=== No, after the 1st-time deployment of an entire IPVA only the ...26 KB (4,142 words) - 10:40, 3 May 2023
- Note also that the setup of the player is a typical admin job and ... rights. To start an batch file with admin rights a little trick must ...106 KB (18,250 words) - 14:55, 8 February 2022
- If the user was allowed by the admin to control the recording a recording switch is active during the call when the "Media" Panel is ...55 KB (7,878 words) - 18:10, 30 January 2024
- If the user was allowed by the admin to control the recording a recording switch is active during the call when the "Media" Panel is ...56 KB (7,998 words) - 17:33, 28 March 2024